Superior Thermoelectric Performance of SiGe Nanowires Epitaxially Integrated into Thermal Micro-Harvesters.

Semiconductor nanowires have demonstrated fascinating properties with applications in a wide range of fields, including energy and information technologies. Particularly, increasing attention has focused on SiGe nanowires for applications in a thermoelectric generation. In this work, a bottom-up vapour-liquid-solid chemical vapour Deposition methodology is employed to integrate heavily boron-doped SiGe nanowires on thermoelectric generators. Thermoelectrical properties -, i.e., electrical and thermal conductivities and Seebeck coefficient - of grown nanowires are fully characterized at temperatures ranging from 300 to 600 K, allowing the complete determination of the Figure-of-merit, zT, with obtained values of 0.4 at 600 K for optimally doped nanowires. A correlation between doping level, thermoelectric performance, and elemental distribution is established employing advanced elemental mapping (synchrotron-based nano-X-ray fluorescence). Moreover, the operation of p-doped SiGe NWs integrated into silicon micromachined thermoelectrical generators is shown over standalone and series- and parallel-connected arrays. Maximum open circuit voltage of 13.8 mV and power output as high as 15.6 µW cm-2 are reached in series and parallel configurations, respectively, operating upon thermal gradients generated with hot sources at 200 °C and air flows of 1.5 m s-1 . These results pave the way for direct application of SiGe nanowire-based micro-thermoelectric generators in the field of the Internet of Things.

Spatially and Time-Resolved Carrier Dynamics in Core-Shell InGaN/GaN Multiple-Quantum Wells on GaN Wire.

Time-resolved cathodoluminescence is a key tool with high temporal and spatial resolution. However, optical spectroscopic information can be also extracted using synchrotron pulses in a hard X-ray nanoprobe, exploiting a phenomenon called X-ray excited optical luminescence. Here, with 20 ps time resolution and 80 nm lateral resolution, we applied this time-resolved X-ray microscopy technique to individual core-shell InGaN/GaN multiple quantum well heterostructures deposited on GaN wires. Our findings suggest that the m-plane related multiple quantum well states govern the carrier dynamics. Likewise, our observations support not only the influence of In incorporation in the recombination rates, but also carrier localization phenomena at the hexagon wire apex. In addition, our experiment calls for further investigations of the spatiotemporal domain on the underlying mechanisms of optoelectronic nanodevices. Its great potential becomes more valuable when time-resolved X-ray excited optical luminescence microscopy is used in operando with other methods, such as X-ray absorption spectroscopy.

Remote Doping of Scalable Nanowire Branches.

Selective-area epitaxy provides a path toward high crystal quality, scalable, complex nanowire networks. These high-quality networks could be used in topological quantum computing as well as in ultrafast photodetection schemes. Control of the carrier density and mean free path in these devices is key for all of these applications. Factors that affect the mean free path include scattering by surfaces, donors, defects, and impurities. Here, we demonstrate how to reduce donor scattering in InGaAs nanowire networks by adopting a remote-doping strategy. Low-temperature magnetotransport measurements indicate weak anti-localization-a signature of strong spin-orbit interaction-across a nanowire Y-junction. This work serves as a blueprint for achieving remotely doped, ultraclean, and scalable nanowire networks for quantum technologies.

A helium mini-cryostat for the nanoprobe beamline ID16B at ESRF: characteristics and performance.

A helium mini-cryostat has been developed for the hard X-ray nanoprobe ID16B of the European Synchrotron to collect X-ray excited optical luminescence and X-ray fluorescence at low temperature (<10 K). The mini-cryostat has been specifically designed to fit within the strong space restrictions and high-demanding mechanical constraints imposed by the beamline to provide vibration-free operation and maximal thermal stability. This paper reports the detailed design, architecture and technical requirements of the mini-cryostat, and presents the first experimental data measured using the cryogenic equipment. The resulting cryo-system features ultimate thermal stability, fast cool-down and ultra-low vibrations. The simultaneous X-ray fluorescence and X-ray excited optical luminescence data acquired from bulk GaN and core/shell InGaN/GaN multi-quantum wells validated the excellent performance of the cryostat with ultimate resolution, stability and sensitivity.

Crossed Ga2O3/SnO2 multiwire architecture: a local structure study with nanometer resolution.

Crossed nanowire structures are the basis for high-density integration of a variety of nanodevices. Owing to the critical role of nanowires intersections in creating hybrid architectures, it has become a challenge to investigate the local structure in crossing points in metal oxide nanowires. Thus, if intentionally grown crossed nanowires are well-patterned, an ideal model to study the junction is formed. By combining electron and synchrotron beam nanoprobes, we show here experimental evidence of the role of impurities in the coupling formation, structural modifications, and atomic site configuration based on crossed Ga2O3/SnO2 nanowires. Our experiment opens new avenues for further local structure studies with both nanometer resolution and elemental sensitivity.

Probing quantum confinement within single core-multishell nanowires.

Theoretically core-multishell nanowires under a cross-section of hexagonal geometry should exhibit peculiar confinement effects. Using a hard X-ray nanobeam, here we show experimental evidence for carrier localization phenomena at the hexagon corners by combining synchrotron excited optical luminescence with simultaneous X-ray fluorescence spectroscopy. Applied to single coaxial n-GaN/InGaN multiquantum-well/p-GaN nanowires, our experiment narrows the gap between optical microscopy and high-resolution X-ray imaging and calls for further studies on the underlying mechanisms of optoelectronic nanodevices.

Synchrotron microanalysis techniques applied to potential photovoltaic materials.

X-ray synchrotron radiation techniques are used to characterize photovoltaic-related semiconductors. Micro-X-ray-fluorescence and X-ray beam induced current mapping of multicrystalline silicon photovoltaic cells show metallic impurities accumulating at the interface of crystallographic defects, and current variations over the cell that are attributed to bulk defects and structural variation of the silicon. Similarly, studies on a single-crystal GaAs using X-ray fluorescence and X-ray excited optical luminescence show an inhomogeneous As distribution correlated with the photoluminescence signal, with higher As concentration regions having stronger photoluminescence signal. Both examples show how the combination of synchrotron microanalysis techniques can contribute to a better understanding of the optical properties of photovoltaic materials.

Status of the hard X-ray microprobe beamline ID22 of the European Synchrotron Radiation Facility.

The ESRF synchrotron beamline ID22, dedicated to hard X-ray microanalysis and consisting of the combination of X-ray fluorescence, X-ray absorption spectroscopy, diffraction and 2D/3D X-ray imaging techniques, is one of the most versatile instruments in hard X-ray microscopy science. This paper describes the present beamline characteristics, recent technical developments, as well as a few scientific examples from recent years of the beamline operation. The upgrade plans to adapt the beamline to the growing needs of the user community are briefly discussed.

Spatially Resolved Dynamics of Cobalt Color Centers in ZnO Nanowires.

The dynamics of color centers, being a promising quantum technology, is strongly dependent on the local environment. A synergistic approach of X-ray fluorescence analysis and X-ray excited optical luminescence (XEOL) using a hard X-ray nanoprobe is applied. The simultaneous acquisition provides insights into compositional and functional variations at the nanoscale demonstrating the extraordinary capabilities of these combined techniques. The findings on cobalt doped zinc oxide nanowires show an anticorrelation between the band edge emission of the zinc oxide host and the intra-3d cobalt luminescence, indicating two competing recombination paths. Moreover, time-resolved XEOL measurements reveal two exponential decays of the cobalt luminescence. The fast and newly observed one can be attributed to a recombination cascade within the cobalt atom, resulting from direct excitation. Thus, this opens a new fast timescale for potential devices based on cobalt color centers in ZnO nanowires in photonic circuits.

Microstructuring to Improve the Thermal Stability of GeSn Layers.

Tin segregation in Ge1-xSnx alloys is one of the major problems potentially hindering the use of this material in devices. Ge1-xSnx microdisks fabricated from layers with Sn concentrations up to 16.9% underwent here annealing at temperatures as high as 400 °C for 20 min without Sn segregation, in contrast with the full segregation observed in the corresponding blanket layers annealed simultaneously. After annealing, no changes in the elemental composition of the microdisks were evidenced. An enhancement of the total integrated photoluminescence, with no modifications of the emission energy, was also observed. These findings show that microstructuring offers a completely new path in maintaining the stability of high Sn concentration Ge1-xSnx layers at temperatures much higher than those used for growth. This approach enables the use of thermal annealing processes to improve the properties of this alloy in optoelectronic devices (such as light emitting diodes, lasers, photodetectors, or modulators). It should also facilitate the integration of Ge1-xSnx into well-established technologies requiring medium temperature processes. The same strategy may help to prevent Sn segregation during high temperature processes in similar metastable alloys.

In-Operando Nanoscale X-ray Analysis Revealing the Local Electrical Properties of Rubidium-Enriched Grain Boundaries in Cu(In,Ga)Se2 Solar Cells.

Chalcogenide Cu(In,Ga)Se2 solar cells yield one of the highest efficiencies among all thin-film photovoltaics. However, the variability of the absorber compositions and incorporated alkali elements strongly affect the conversion efficiency. Thus, effective strategies for spatially resolved tracking of the alkali concentration and composition during operation are needed to alleviate this limitation. Here, using a hard X-ray nanoprobe, we apply a synergistic approach of X-ray fluorescence analysis and X-ray beam-induced current techniques under operando conditions. The simultaneous monitoring of both compositional and functional properties in complete solar cells illustrates the exceptional capabilities of this combination of techniques in top-view geometry, where high spatial resolution resulted even underneath the electrical contacts. Our observations reveal Rb agglomerations in selected areas and compositional variations between different grains and their boundaries. The concurrent detection of the functionality exhibits negligible effects on the collection efficiency for Rb-enriched grain boundaries in comparison to their neighboring grains, which indicates the passivation of detrimental defects.

Hot electrons in a nanowire hard X-ray detector.

Nanowire chip-based electrical and optical devices such as biochemical sensors, physical detectors, or light emitters combine outstanding functionality with a small footprint, reducing expensive material and energy consumption. The core functionality of many nanowire-based devices is embedded in their p-n junctions. To fully unleash their potential, such nanowire-based devices require - besides a high performance - stability and reliability. Here, we report on an axial p-n junction GaAs nanowire X-ray detector that enables ultra-high spatial resolution (~200 nm) compared to micron scale conventional ones. In-operando X-ray analytical techniques based on a focused synchrotron X-ray nanobeam allow probing the internal electrical field and observing hot electron effects at the nanoscale. Finally, we study device stability and find a selective hot electron induced oxidization in the n-doped segment of the p-n junction. Our findings demonstrate capabilities and limitations of p-n junction nanowires, providing insight for further improvement and eventual integration into on-chip devices.

Elemental Distribution and Structural Characterization of GaN/InGaN Core-Shell Single Nanowires by Hard X-ray Synchrotron Nanoprobes.

Improvements in the spatial resolution of synchrotron-based X-ray probes have reached the nano-scale and they, nowadays, constitute a powerful platform for the study of semiconductor nanostructures and nanodevices that provides high sensitivity without destroying the material. Three complementary hard X-ray synchrotron techniques at the nanoscale have been applied to the study of individual nanowires (NWs) containing non-polar GaN/InGaN multi-quantum-wells. The trace elemental sensitivity of X-ray fluorescence allows one to determine the In concentration of the quantum wells and their inhomogeneities along the NW. It is also possible to rule out any contamination from the gold nanoparticle catalyst employed during the NW growth. X-ray diffraction and X-ray absorption near edge-structure probe long- and short-range order, respectively, and lead us to the conclusion that while the GaN core and barriers are fully relaxed, there is an induced strain in InGaN layers corresponding to a perfect lattice matching with the GaN core. The photoluminescence spectrum of non-polar InGaN quntum wells is affected by strain and the inhomogeneous alloy distribution but still exhibits a reasonable 20% relative internal quantum efficiency.

Exploring single semiconductor nanowires with a multimodal hard X-ray nanoprobe.

Semiconductor nanowires offer new opportunities for optoelectronic and spintronic nanodevices. However, their full potential is ultimately dictated by our ability to control multiple property-function relationships taking place at the nanoscale in the spatial and time domains. Only a combination of high-resolution analytical techniques can provide a comprehensive understanding of their complex functionalities. Here we describe how a multimodal hard X-ray nanoprobe addresses fundamental questions in nanowire research. Selected topics ranging from cluster formation, dopant segregation, and phase separations to quantum confinement effects are investigated with sub-100 nm spatial resolution and sub-50 ps temporal resolution. This approach opens new avenues for structural, composition and optical studies with broad applicability in materials science.