RESUMO
The electrocatalytic epoxidation of alkenes at heterogeneous catalysts using water as the sole oxygen source is a promising safe route toward the sustainable synthesis of epoxides, which are essential building blocks in organic chemistry. However, the physicochemical parameters governing the oxygen-atom transfer to the alkene and the impact of the electrolyte structure on the epoxidation reaction are yet to be understood. Here, we study the electrocatalytic epoxidation of cyclooctene at the surface of gold in hybrid organic/aqueous mixtures using acetonitrile (ACN) solvent. Gold was selected, as in ACN/water electrolytes gold oxide is formed by reactivity with water at potentials less anodic than the oxygen evolution reaction (OER). This unique property allows us to demonstrate that a sacrificial mechanism is responsible for cyclooctene epoxidation at metallic gold surfaces, proceeding through cyclooctene activation, while epoxidation at gold oxide shares similar reaction intermediates with the OER and proceeds via the activation of water. More importantly, we show that the hydrophilicity of the electrode/electrolyte interface can be tuned by changing the nature of the supporting salt cation, hence affecting the reaction selectivity. At low overpotential, hydrophilic interfaces formed using strong Lewis acid cations are found to favor gold passivation. Instead, hydrophobic interfaces created by the use of large organic cations favor the oxidation of cyclooctene and the formation of epoxide. Our study directly demonstrates how tuning the hydrophilicity of electrochemical interfaces can improve both the yield and selectivity of anodic reactions at the surface of heterogeneous catalysts.
Assuntos
Alcenos , Oxigênio , Alcenos/química , Ciclo-Octanos , Compostos de Epóxi/química , Ouro , Interações Hidrofóbicas e Hidrofílicas , Oxigênio/química , Água/químicaRESUMO
To reach a deeper understanding of the charge storage mechanisms of electrode materials is one of the challenges toward improving their energy storage performance. Herein, we investigate the interfacial ion exchange of a composite electrode made of carbon nanotube/poly(ortho-phenylenediamine) (CNT/PoPD) in a 1M NaCl aqueous electrolyte via advanced electrogravimetric analyses based on electrochemical quartz crystal microbalance (EQCM). Classical EQCM at different scan rates of the potential revealed the complex electrogravimetric behavior likely due to multi-species participation at different temporal scales. Thereafter, in order to better understand the behavior of each species (ions, counter ions, and co-ions) in the charge compensation mechanism, the electrogravimetric impedance spectroscopy analysis (also called ac-electrogravimetry) was pursued. Ac-electrogravimetry revealed the role of each species where Na+ cations and Cl- anions as well as protons participate in the charge compensation mechanism of the CNT/PoPD composite with different kinetics and proportions. The water molecules with opposite flux direction with the cations are also detected, suggesting their exclusion during cationic species transfer. Having analyzed ac-electrogravimetry responses in depth, the synergistic interaction between the CNT and PoPD is highlighted, revealing the improved accessibility of species to new sites in the composite.
Assuntos
Nanotubos de Carbono , Eletrodos , Eletrólitos , Nanotubos de Carbono/química , Fenilenodiaminas/químicaRESUMO
Numerous sophisticated diagnostic techniques have been designed to monitor electrode-electrolyte interfaces that mainly govern the lifetime and reliability of batteries. Among them is the electrochemical quartz crystal microbalance (EQCM) that offers valuable insights of the interfaces once the required conditions of the deposited film in terms of viscoelastic and hydrodynamic properties are fulfilled. Herein, we propose a friendly protocol that includes the elaboration of a homogeneous deposit by spray coating followed by QCM measurements at multiharmonic frequencies to ensure the film flatness and rigidity for collecting meaningful data. Moreover, for easiness of the measurements, we report the design of a versatile and airtight EQCM cell setup that can be used either with aqueous or non-aqueous electrolytes. We also present, using a model battery material, LiFePO4, how dual frequency and motional resistance monitoring during electrochemical cycling can be used as a well-suitable indicator for achieving reliable and reproducible electrogravimetric measurements. We demonstrate through this study the essential role of the solvent assisting lithium-ion insertion at the LiFePO4 interface with a major outcome of solvent-dependent interfacial behavior. Namely, in aqueous media, we prove a near-surface desolvation of lithium ions from their water solvation shell as compared with organic molecules. This spatial dissimilarity leads to a smoother Li-ion transport across the LFP-H2O interface, hence accounting for the difference in rate capability of LFP in the respective electrolytes. Overall, we hope our analytical insights on interfacial mechanisms will help in gaining a wider acceptance of EQCM-based methods from the battery community.
RESUMO
Revealed by an integrated electrogravimetric and viscoelastic method, slightly electrochemically reduced graphene oxide (ERGO) presents an anion preference for charge storage and delivery, while with the progressive removal of oxygen functionalities on its basal planes, cations begin to predominate in charge compensation. This "anion-to-cation" evolution in neutral aqueous media can not only affect the electrochemical charge storage, but also play an important role in electrode's viscoelasticity. It was demonstrated that oxygen functionalities could modify the interactions between graphene layers and even contribute to pseudocapacitances. However, the role of oxygen functionalities in species transfer and viscoelastic variations still remains poorly understood. Herein, a combined methodology of electrochemical quartz crystal microbalance (EQCM), ac-electrogravimetry and electroacoustic impedance measurements was proposed for characterizing the electrochemical and viscoelastic responses of graphene oxides with various degree of electrochemical reduction. With the removal of oxygen containing functional groups, ERGO electrode exhibits ( i) a gradually enhanced specific capacitance ( Cs) with increased flexibility (decreased storage moduli, G'); ( ii) a dehydration process of cations (i.e., from Na+·2H2O to Na+·H2O); and ( iii) a potential-dependent "stiffened-softened" behavior. These results open the door for a suitable design of GO-based materials for electrochemical energy storage and shed light on electronic devices where ion-selective behavior plays a key role.
RESUMO
The mechanism of species fluxes during the charge-discharge process in a nanostructured ZnO electrode was studied by a combined methodology of electrochemical quartz-crystal microbalance (EQCM) and ac-electrogravimetry. Under the conditions of this study, anions (SO42-) possess the highest kinetics to be transferred at the electrode/electrolyte interface in the charge balance while cations (identified as Na+·5H2O and Na+) play the major role as charge carriers. Free H2O molecules present a sluggish behavior and their interfacial transfer occurs at a low scan rate or low frequencies. These findings shed light on the nature of ions and solvent participation in the charge balance of hydrothermally synthesized ZnO nanostructures directly grown on a QCM device. The combined methodology proposed herein provides dynamic and gravimetric analysis of interfacial charge transfer and can be extended to investigate other nanostructured metal oxide-based electrodes for energy storage.
RESUMO
A straightforward crack-patterning method is reported allowing the direct formation of periodic cracks in metal-organic framework (MOF) nanoparticle films during dip-coating deposition. The crack propagation and periodicity can be easily tailored by controlling the evaporation front and the withdrawal speed. Several MOF-patterned films can be fabricated on large surfaces and on several substrates (flat, curved or flexible) including the inner surface of a tube, not achievable by other lithographic techniques. We demonstrate that the periodic cracked arrays diffract light and, due to the MOF sorption properties, photonic vapor sensors are fabricated. A new concept of "in-tube", MOF-based diffraction grating sensors is proposed with outstanding sensitivity that can be easily tuned "on-demand" as function of the desired detection range.
RESUMO
Electrochemical Impedance Spectroscopy (EIS) was, for the first time, used to estimate the global transverse proton diffusion coefficient, D(H+)(EHM), in electrospun hybrid conducting membranes (EHMs). In contrast to conventional impedance spectroscopy, EIS measurements were performed at room temperature with a liquid interface. In this configuration, the measure of the bulk proton transport is influenced by the kinetics of the transfer of proton at the solid/liquid interface. We demonstrated that the use of additives in the process of the membrane impacts the organization of the hydrophilic domains and also the proton transport. The D(H+)(EHM) is close to 1.10(-7) cm(2) s(-1) (± 0.1.10(-7) cm(2) s(-1)) for the EHMs without additive, whereas it is 4.10(-6) cm(2) s(-1) (± 0.4.10(-6) cm(2) s(-1)) for EHMs with additives.
RESUMO
Mesoporous WO3 thin films were prepared electrochemically by using an ionic surfactant during the synthesis, and the electrochemical properties are investigated in comparison with their dense analogues. This report specifically highlights the suitability of a time resolved coupled electrogravimetric method to follow meticulously the ion intercalation/extraction phenomena which revealed the enhanced ion intercalation/extraction behavior of electrodeposited mesoporous WO3 thin films for diverse applications in energy storage and electrochromism. This methodology (electrochemical impedance spectroscopy (EIS) and its coupling with a fast quartz crystal microbalance (QCM)) has the ability to detect the contribution of the charged or uncharged species during the electrochemical processes, and to deconvolute the global EQCM responses into the anionic, cationic, and the free solvent contributions. Our study identifies the involvement of several charged species (Li(+), Li(+)·H2O) in the compensation of charge, and H2O molecules indirectly contribute to the process in both dense and mesoporous WO3 thin films. Even a slight contribution of ClO4(-) ions was detected in the case of mesoporous analogues. The results of the study indicate that the transfer resistances of Li(+) and Li(+)·H2O are decreased when the WO3 films are mesoporous. A more significant difference is observed for the larger and partially dehydrated Li(+)·H2O ions, suggesting that increased surface area and pore volume created by mesoporous morphology facilitate the transfer of larger charged species. The relative concentration changes of cations are also magnified in the mesoporous films. The final concentration variations are higher in mesoporous films than that in the dense analogues; â¼4 times and â¼10 times higher for Li(+) and for Li(+)·H2O, respectively. To the best of our knowledge, an unambiguous identification of species other than desolvated cations (e.g. Li(+) ions), the information on their transfer dynamics and quantification of the transferred species have never been reported in the literature to describe the charge compensation process in WO3 based electrodes.
RESUMO
Advancements in operando techniques have unraveled the complexities of the Electrode Electrolyte Interface (EEI) in electrochemical energy storage devices. However, each technique has inherent limitations, often necessitating adjustments to experimental conditions, which may compromise accuracy. To address this challenge, a novel battery cell design is introduced, integrating piezoelectric sensors with electrochemical analysis for surface-sensitive operando measurements. This innovative approach aims to overcome conventional limitations by accommodating commercial-grade battery electrodes within a single body, alongside a piezoelectric sensor. This enables operando electrogravimetric measurements to be realized, and the electrochemistry of a battery to be more faithfully reproduced at the sensor level. A proof of concept is carried out on both Li-ion (LiFePO4//Graphite) and Na-ion (Na3V2(PO4)2F3//Hard carbon) systems, utilizing commercially available powder electrodes. In both cases, the results reveal rational mass variations at the sensor level during the cycling of commercial electrodes with mass loadings several orders of magnitude higher, while performing Galvanostatic Charge Discharge (GCD) tests across various C-rates. This innovative design opens up possibilities for a broader application of operando electrogravimetry within the battery community, to enhance the understanding of EEI behavior and facilitate the development of more efficient energy storage solutions.
RESUMO
This letter deals with an adaptation of the ac-electrogravimetry technique to extract separately the dynamic properties of H(+) and water in Nafion nanometric thin films (average thickness of 400 nm). An original theoretical approach was developed to extract the representative parameters from ac-electrogravimetry data. The concentration change of the exchanged species and the diffusion coefficient of the protons in a Nafion nanometric thin film (D = 0.5 × 10(-6) cm(2) s(-1) at 0.3 V vs SCE) were estimated for the first time according to the applied potential. The conductivity value of Nafion thin films was calculated from the Nernst-Einstein equation using diffusion coefficients and concentration values extracted from ac-electrogravimetry data. The calculated conductivity results agree well with the experimental proton conductivity values of Nafion thin films.
RESUMO
Among a variety of promising cathode materials for Na-ion batteries, polyanionic Na-insertion compounds are among the preferred choices due to known fast sodium transfer through the ion channels along their framework structures. The most interesting representatives are Na3V2(PO4)3 (NVP) and Na3V2(PO4)2F3 (NVPF), which display large Na+ diffusion coefficients (up to 10-9 m2 s-1 in NVP) and high voltage plateaux (up to 4.2 V for NVPF). While the diffusion in the solid material is well-known to be the rate-limiting step during charging, already being thoroughly discussed in the literature, interfacial transport of sodium ions from the liquid electrolyte toward the electrode was recently shown to be important due to complex ion desolvation effects at the surface. In order to fill the blanks in the description of the electrode/electrolyte interface in Na-ion batteries, we performed a molecular dynamics study of the local nanostructure of a series of carbonate-based sodium electrolytes at the NVP and the NVPF interfaces along with careful examination of the desolvation phenomenon. We show that the tightness of solvent packing at the electrode surface is a major factor determining the height of the free energy barrier associated with desolvation, which explains the differences between the NVP and the NVPF structures. To rationalize and emphasize the remarkable properties of this family of cathode materials, a complementary comparative analysis of the same electrolyte system at the carbon electrode interface was also performed.
RESUMO
Electrochemical quartz crystal microbalance (EQCM) and AC-electrogravimetry methods were employed to study ion dynamics in carbon nanotube base electrodes in NaCl aqueous electrolyte. Two types of carbon nanotubes, Double Wall Carbon Nanotube (DWCNT) and Multi Wall Carbon Nanotube (MWCNT), were chosen due to their variable morphology of pores and structure properties. The effect of pore morphology/structure on the capacitive charge storage mechanisms demonstrated that DWCNT base electrodes are the best candidates for energy storage applications in terms of current variation and specific surface area. Furthermore, the mass change obtained via EQCM showed that DWCNT films is 1.5 times greater than MWCNT films in the same potential range. In this way, the permselectivity of DWCNT films showed cation exchange preference at cathode potentials while MWCNT films showed anion exchange preference at anode potentials. The relative concentration obtained from AC-electrogravimetry confirm that DWCNT base electrodes are the best candidates for charge storage capacity electrodes, since they can accommodate higher concentration of charged species than MWCNT base electrodes.
RESUMO
A major feature of the electrolyte/electrode interface (EEI) that affects charge storage in lithium-ion batteries is the electrical double layer (EDL), but most of the available experimental approaches for probing its structuration have limitations due to electrical field and redox reaction disturbances, hence explaining why it is frequently overlooked. Herein we show that this is no longer true by using an advanced electrochemical quartz crystal microbalance (EQCM)-based method in the form of ac-electrogravimetry. For proof of concept, we studied the effect of various solvent/salt combinations, differing in their dipole moment and size/weight, respectively, on the structure of the EDL forming at the EEI of LixMoO3. We show that a significant amount of solvated lithium ions and anions contribute to charge compensation at the interface, and by varying the nature of the solvents (cyclic vs noncyclic), we provide a solid experimental proof of the direct relationship between the ions' solvation and solvent polarity. Moreover, we demonstrated a disappearance of the anionic motion in the less polar solvent (DMC) most likely due to plausible formation of contact ion pairs and agglomerates at the EDL level. Altogether, ac-electrogravimetry, when combined with classical EQCM, stands as an elegant and powerful method to experimentally assess the chemical structure and dynamics of the electrical double layer. We hope that the community will start to adopt it to better engineer interfaces of electrochemical energy storage devices.
RESUMO
Li-ion batteries are the electrochemical energy storage technology of choice of today's electrical vehicles and grid applications with a growing interest for Na-ion and K-ion systems based on either aqueous or non-aqueous electrolyte for power, cost, and sustainable reasons. The rate capability of alkali-metal-ion batteries is influenced by ion transport properties in the bulk of the electrolyte, as well as by diverse effects occurring at the vicinity of the electrode and electrolyte interface. Therefore, identification of the predominant factor affecting the rate capability of electrodes still remains a challenge and requires suitable experimental and computational methods. Herein, we investigate the mechanistic of the K+ insertion process in the Prussian blue phase, Fe4III[FeII(CN)6]3 in both aqueous and non-aqueous electrolytes, which reveals drastic differences. Through combined electrochemical characterizations, electrochemical-quartz-crystal-microbalance and ac-electrogravimetric analyses, we provide evidences that what matters the most for fast ion transport is the positioning of the partially solvated cations adsorbed at the material surface in aqueous as opposed to non-aqueous electrolytes. We rationalized such findings by molecular dynamics simulations that establish the K+ repartition profile within the electrochemical double layer. A similar trend was earlier reported by our group for the aqueous versus non-aqueous insertion of Li+ into LiFePO4. Such a study unveils the critical but overlooked role of the electrode-electrolyte interface in ruling ion transport and insertion processes. Tailoring this interface structuring via the proper salt-solvent interaction is the key to enabling the best power performances in alkali-metal-ion batteries.
RESUMO
Rechargeable batteries employing aqueous electrolytes are more reliable and cost-effective as well as possess high ionic conductivity compared to the flammable organic electrolyte solutions. Among these types of batteries, aqueous batteries with multivalent ions attract more attention in terms of providing high energy density. Herein, electrochemical behavior of an organic electrode based on a highly aromatic polymer containing 2,3-diaminophenazine repeating unit, namely poly(ortho-phenylenediamine) (PoPD), is tested in two different multivalent ions (Zn2+ and Al3+) containing aqueous electrolytes, that is, in zinc sulfate and aluminum chloride solutions. PoPD is synthesized via electropolymerization, and its ion transport and storage mechanism are comprehensively investigated by structural and electrochemical analyses. The electrochemical quartz crystal microbalance, time-dependent Fourier transform infrared, and electrochemical impedance spectroscopy analyses as well as ex situ X-ray diffraction observations established that along with the Zn2+ or Al3+ ions, reversible proton insertion/extraction also takes place. Contrary to the most of the organic electrodes that requires the use of conductive carbon additives, the electrodeposited PoPD electrode is intrinsically electrically conductive enough, resulting in a binder and additive free electrode assembly. In addition, its discharge products do not dissolve in aqueous medium. As a whole, the resulting PoPD electrode delivers excellent rate performances with prolonged cycle life in which discharge capacities of â¼110 mAh g-1 in 0.25 M AlCl3 and â¼93 mAh g-1 in 1 M ZnSO4 aqueous electrolyte after 1000 cycles at a current density of 5C have been achieved.
RESUMO
Electrolyte composition is a crucial factor determining the capacitive properties of a supercapacitor device. However, its complex influence on the energy storage mechanisms has not yet been fully elucidated. For this purpose, in this study, the role of three different types of electrolytes based on a propylene carbonate (PC) solution containing tetrabutylammonium perchlorate (TBAClO4), lithium perchlorate (LiClO4) and butyltrimethylammonium bis(trifluoromethylsulfonyl)imide (N1114TFSI) ionic liquid on vertically-oriented graphene nanosheet electrodes has been investigated. Herein, in situ electrochemical quartz crystal microbalance (EQCM) and its coupling with electrochemical impedance spectroscopy (EIS), known as ac-electrogravimetry, have allowed the dynamic aspects of the (co)electroadsorption processes at the electrode-electrolyte interface to be examined. A major contribution of ClO4- anions (TBAClO4) was evidenced, whereas in the PC/N1114TFSI mixture (50:50 wt%) both anions (TFSI-) and cations (N1114+) were symmetrically exchanged during cycling. In the particular case of LiClO4, solvation of Li+ cations in PC was involved, affecting the kinetics of electroadsorption. These results demonstrate the suitability of dynamic electrogravimetric methods to unveil the interfacial exchange properties of mobile species for the conception of new high performance energy storage devices.
RESUMO
Recently, because of sustainability issues dictated by societal demands, more importance has been given to aqueous systems and especially to proton-based batteries. However, the mechanisms behind the processes leading to energy storage in such systems are still not elucidated. Under this scope, our study is structured on the selection of a model electrode material, the protonic phase HxIrO4, and the scrutiny of the interfacial processes through suitable analytical tools. Herein, we employed operando electrochemical quartz crystal microbalance (EQCM) combined with electrochemical impedance spectroscopy (EIS) to provide new insights into the mechanism intervening at the electrode-electrolyte interface. First, we demonstrated that not only the surface or near surface but the whole particle participates in the cationic redox process. Second, we proved that the contribution of the proton on the overall potential window together with the incorporation of water at low potentials solely. This is explained by the fact that water molecules permit a further insertion of protons in the material by shielding the proton charge but at the expense of the proton kinetic properties. These findings shed a new light on the importance of water molecules in the ion-insertion mechanisms taking place at the electrode-electrolyte interface of aqueous proton-based batteries. Overall, the present results further highlight the richness of the EQCM-based methods for the battery field in offering mechanistic insights that are crucial for the understanding of interfaces and charge storage in insertion compounds.
RESUMO
TEMPO-oxidized cellulose nanofibrils (TOCNF) and oxidized carbon nanotubes (CNT) were used as humidity-responsive films and evaluated using electroacoustic admittance (quartz crystal microbalance with impedance monitoring, QCM-I) and electrical resistivity. Water uptake and swelling phenomena were investigated in a range of relative humidity (% RH) between 30 and 60% and temperatures between 25 and 50 °C. The presence of CNT endowed fibril networks with high water accessibility, enabling fast and sensitive response to changes in humidity, with mass gains of up to 20%. The TOCNF-based sensors became viscoelastic upon water uptake, as quantified by the Martin-Granstaff model. Sensing elements were supported on glass and paper substrates and confirmed a wide window of operation in terms of cyclic % RH, bending, adhesion, and durability. The electrical resistance of the supported films increased by â¼15% with changes in % RH from 20 to 60%. The proposed system offers a great potential to monitor changes in smart packaging.
RESUMO
PEDOT nanowires (NWs) directly grown on the conducting electrode of quartz resonators enable an advanced electrogravimetric analysis of their charge storage behavior. Electrochemical quartz crystal microbalance (EQCM) and its coupling with electrochemical impedance spectroscopy (ac-electrogravimetry or AC-EG) were used complementarily and reveal that TBA+, BF4- and ACN participate in the charge compensation process with different kinetics and quantity. BF4- anions were dominant in terms of concentration over TBA+ cations and the anion transfer results in the exclusion of the solvent molecules. TBA+ concentration variation in the electrode was small compared to that of the BF4- counterpart. However, Mw of TBA+ is much higher than BF4- (242.3 vs. 86.6 g·mol-1). Thus, TBA+ cations' gravimetric contribution to the EQCM response was more significant than that of BF4-. Additional contribution of ACN with an opposite flux direction compared with BF4-, led to a net mass gain/lost during a negative/positive potential scan, masking partially the anion response. Such subtleties of the interfacial ion transfer processes were disentangled due to the complementarity of the EQCM and AC-EG methodologies, which were applied here for the characterization of electrochemical processes at the PEDOT NW electrode/organic electrolyte interface.
RESUMO
Hybrid organic-inorganic approaches are used for the synthesis of bifunctional proton exchange membrane fuel cell (PEMFC) membranes owing to their ability to combine the properties of a functionalized inorganic network and an organic thermostable polymer. We report the synthesis of both sulfonic and phosphonic acid functionalized mesostructured silica networks into a poly(vinylidenefluoride-co-hexafluoropropylene) (poly(VDF-co-HFP) copolymer. These membranes, containing different amounts of phosphonic acid and sulfonic acid groups, have been characterized using FTIR and NMR spectroscopy, SA-XRD, SAXS, and electrochemical techniques. The proton conductivity of the bifunctional hybrid membranes depends strongly on hydration, increasing by two orders of magnitude over the relative humidity (RH) range of 20 to 100%, up to a maximum of 0.031 S cm(-1) at 60 °C and 100% RH. This value is interesting as only half of the membrane conducts protons. This approach allows the synthesis of a porous SiO(2) network with two different functions, having -SO(3)H and -PO(3)H(2) embedded in a thermostable polymer matrix.