Compressed Prostate Cancer Cells Decrease Osteoclast Activity While Enhancing Osteoblast Activity In Vitro.

Once prostate cancer cells metastasize to bone, they perceive approximately 2 kPa compression. We hypothesize that 2 kPa compression stimulates the epithelial-to-mesenchymal transition (EMT) of prostate cancer cells and alters their production of paracrine signals to affect osteoclast and osteoblast behavior. Human DU145 prostate cancer cells were subjected to 2 kPa compression for 2 days. Compression decreased expression of 2 epithelial genes, 5 out of 13 mesenchymal genes, and increased 2 mesenchymal genes by DU145 cells, as quantified by qPCR. Conditioned medium (CM) of DU145 cells was added to human monocytes that were stimulated to differentiate into osteoclasts for 21 days. CM from compressed DU145 cells decreased osteoclast resorptive activity by 38% but did not affect osteoclast size and number compared to CM from non-compressed cells. CM was also added to human adipose stromal cells, grown in osteogenic medium. CM of compressed DU145 cells increased bone nodule production (Alizarin Red) by osteoblasts from four out of six donors. Compression did not affect IL6 or TNF-α production by PC DU145 cells. Our data suggest that compression affects EMT-related gene expression in DU145 cells, and alters their production of paracrine signals to decrease osteoclast resorptive activity while increasing mineralization by osteoblasts is donor dependent. This observation gives further insight in the altered behavior of PC cells upon mechanical stimuli, which could provide novel leads for therapies, preventing bone metastases.

Comprehensive transcriptome analysis of fluid shear stress altered gene expression in renal epithelial cells.

Renal epithelial cells are exposed to mechanical forces due to flow-induced shear stress within the nephrons. Shear stress is altered in renal diseases caused by tubular dilation, obstruction, and hyperfiltration, which occur to compensate for lost nephrons. Fundamental in regulation of shear stress are primary cilia and other mechano-sensors, and defects in cilia formation and function have profound effects on development and physiology of kidneys and other organs. We applied RNA sequencing to get a comprehensive overview of fluid-shear regulated genes and pathways in renal epithelial cells. Functional enrichment-analysis revealed TGF-ß, MAPK, and Wnt signaling as core signaling pathways up-regulated by shear. Inhibitors of TGF-ß and MAPK/ERK signaling modulate a wide range of mechanosensitive genes, identifying these pathways as master regulators of shear-induced gene expression. However, the main down-regulated pathway, that is, JAK/STAT, is independent of TGF-ß and MAPK/ERK. Other up-regulated cytokine pathways include FGF, HB-EGF, PDGF, and CXC. Cellular responses to shear are modified at several levels, indicated by altered expression of genes involved in cell-matrix, cytoskeleton, and glycocalyx remodeling, as well as glycolysis and cholesterol metabolism. Cilia ablation abolished shear induced expression of a subset of genes, but genes involved in TGF-ß, MAPK, and Wnt signaling were hardly affected, suggesting that other mechano-sensors play a prominent role in the shear stress response of renal epithelial cells. Modulations in signaling due to variations in fluid shear stress are relevant for renal physiology and pathology, as suggested by elevated gene expression at pathological levels of shear stress compared to physiological shear.

Mechanical Loading Differentially Affects Osteocytes in Fibulae from Lactating Mice Compared to Osteocytes in Virgin Mice: Possible Role for Lacuna Size.

Hormonal changes during lactation are associated with profound changes in bone cell biology, such as osteocytic osteolysis, resulting in larger lacunae. Larger lacuna shape theoretically enhances the transmission of mechanical signals to osteocytes. We aimed to provide experimental evidence supporting this theory by comparing the mechanoresponse of osteocytes in the bone of lactating mice, which have enlarged lacunae due to osteocytic osteolysis, with the response of osteocytes in bone from age-matched virgin mice. The osteocyte mechanoresponse was measured in excised fibulae that were cultured in hormone-free medium for 24 h and cyclically loaded for 10 min (sinusoidal compressive load, 3000 µÎµ, 5 Hz) by quantifying loading-related changes in Sost mRNA expression (qPCR) and sclerostin and ß-catenin protein expression (immunohistochemistry). Loading decreased Sost expression by ~ threefold in fibulae of lactating mice. The loading-induced decrease in sclerostin protein expression by osteocytes was larger in lactating mice (55% decrease ± 14 (± SD), n = 8) than virgin mice (33% decrease ± 15, n = 7). Mechanical loading upregulated ß-catenin expression in osteocytes in lactating mice by 3.5-fold (± 0.2, n = 6) which is significantly (p < 0.01) higher than the 1.6-fold increase in ß-catenin expression by osteocytes in fibulae from virgin mice (± 0.12, n = 4). These results suggest that osteocytes in fibulae from lactating mice with large lacunae may respond stronger to mechanical loading than those from virgin mice. This could indicate that osteocytes residing in larger lacuna show a stronger response to mechanical loading.

The Src inhibitor AZD0530 reversibly inhibits the formation and activity of human osteoclasts.

Tumor cells in the bone microenvironment are able to initiate a vicious cycle of bone degradation by mobilizing osteoclasts, multinucleated cells specialized in bone degradation. c-Src is highly expressed both in tumors and in osteoclasts. Therefore, drugs like AZD0530, designed to inhibit Src activity, could selectively interfere with both tumor and osteoclast activity. Here we explored the effects of AZD0530 on human osteoclast differentiation and activity. The effect on osteoclasts formed in vivo was assessed in mouse fetal calvarial explants and in isolated rabbit osteoclasts, where it dose-dependently inhibited osteoclast activity. Its effect on formation and activity of human osteoclasts in vitro was determined in cocultures of human osteoblasts and peripheral blood mononuclear cells. AZD0530 was most effective in inhibiting osteoclast-like cell formation when present at the onset of osteoclastogenesis, suggesting that Src activity is important during the initial phase of osteoclast formation. Formation of active phosphorylated c-Src, which was highly present in osteoclast-like cells in cocultures and in peripheral blood mononuclear cell monocultures, was significantly reduced by AZD0530. Furthermore, it reversibly prevented osteoclast precursor migration from the osteoblast layer to the bone surface and subsequent formation of actin rings and resorption pits. These data suggest that Src is pivotal for the formation and activity of human osteoclasts, probably through its effect on the distribution of the actin microfilament system. The reversible effect of AZD0530 on osteoclast formation and activity makes it a promising candidate to temper osteoclastic bone degradation in bone diseases with enhanced osteoclast activity such as osteolytic metastatic bone disease.

Osteocyte morphology in fibula and calvaria --- is there a role for mechanosensing?

INTRODUCTION: External mechanical forces on cells are known to influence cytoskeletal structure and thus cell shape. Mechanical loading in long bones is unidirectional along their long axes, whereas the calvariae are loaded at much lower amplitudes in different directions. We hypothesised that if osteocytes, the putative bone mechanosensors, can indeed sense matrix strains directly via their cytoskeleton, the 3D shape and the long axes of osteocytes in fibulae and calvariae will bear alignment to the different mechanical loading patterns in the two types of bone. MATERIALS AND METHODS: We used confocal laser scanning microscopy and nano-computed tomography to quantitatively determine the 3D morphology and alignment of long axes of osteocytes and osteocyte lacunae in situ. RESULTS: Fibular osteocytes showed a relatively elongated morphology (ratio lengths 5.9:1.5:1), whereas calvarial osteocytes were relatively spherical (ratio lengths 2.1:1.3:1). Osteocyte lacunae in fibulae had higher unidirectional alignment than the osteocyte lacunae in calvariae as demonstrated by their degree of anisotropy (3.33 and 2.10, respectively). The long axes of osteocyte lacunae in fibulae were aligned parallel to the principle mechanical loading direction, whereas those of calvarial osteocyte lacunae were not aligned in any particular direction. CONCLUSIONS: The anisotropy of osteocytes and their alignment to the local mechanical loading condition suggest that these cells are able to directly sense matrix strains due to external loading of bone. This reinforces the widely accepted role of osteocytes as mechanosensors, and suggests an additional mode of mechanosensing besides interstitial fluid flow. The relatively spherical morphology of calvarial osteocytes suggests that these cells are more mechanosensitive than fibular osteocytes, which provides a possible explanation of efficient physiological load bearing for the maintenance of calvarial bone despite its condition of relative mechanical disuse.

Supraphysiological loading induces osteocyte-mediated osteoclastogenesis in a novel in vitro model for bone implant loosening.

We aimed to develop an in vitro model for bone implant loosening, allowing analysis of biophysical and biological parameters contributing to mechanical instability-induced osteoclast differentiation and peri-implant bone loss. MLO-Y4-osteocytes were mechanically stimulated for 1 h by fluid shear stress using regimes simulating: (i) supraphysiological loading in the peri-prosthetic interface (2.9 ± 2.9 Pa, 1 Hz, square wave); (ii) physiologic loading in the cortical bone (0.7 ± 0.7 Pa, 5 Hz, sinusoidal wave); and (iii) stress shielding. Cellular morphological parameters, membrane-bound RANKL expression, gene expression influencing osteoclast differentiation, nitric oxide release and caspase 3/7-activity were determined. Either Mouse bone marrow cells were cultured on top of loaded osteocytes or osteocyte-conditioned medium was added to bone marrow cells. Osteoclast differentiation was assessed after 6 days. We found that osteocytes subjected to supraphysiological loading showed similar morphology and caspase 3/7-activity compared to simulated physiological loading or stress shielding. Supraphysiological stimulation of osteocytes enhanced osteoclast differentiation by 1.9-fold compared to physiological loading when cell-to-cell contact was permitted. In addition, it enhanced the number of osteoclasts using conditioned medium by 1.7-fold, membrane-bound RANKL by 3.3-fold, and nitric oxide production by 3.2-fold. The stimulatory effect of supraphysiological loading on membrane-bound RANKL and nitric oxide production was higher than that achieved by stress shielding. In conclusion, the in vitro model developed recapitulated the catabolic biological situation in the peri-prosthetic interface during instability that is associated with osteoclast differentiation and enhanced RANKL expression. The model thus provides a platform for pre-clinical testing of pharmacological interventions with potential to stop instability-induced bone implant loosening. © 2017 Orthopaedic Research Society. Published by Wiley Periodicals, Inc. J Orthop Res 36:1425-1434, 2018.

Osteocytes subjected to fluid flow inhibit osteoclast formation and bone resorption.

Bone has the capacity to alter its mass and structure to its mechanical environment. Osteocytes are the predominant bone cells and it is generally accepted that the osteocytes are the professional mechanosensors of bone. A strain-derived fluid flow through the lacuno-canalicular porosity seems to mechanically activate them, resulting in the production of signalling molecules such as nitric oxide (NO). We hypothesize that mechanically stimulated osteocytes modulate osteoclast formation and activity via soluble factors, thus affecting bone resorption. Osteocytes, osteoblasts, and periosteal fibroblasts were isolated from fetal chicken calvariae via enzymatic digestion. The periosteal fibroblasts were obtained from the periostea. Osteocytes were separated from osteoblasts by immunomagnetic separation. Cells were mechanically stimulated for 1 h with pulsating fluid flow (PFF, 0.70 +/- 0.30 Pa) at 5 Hz, or kept under static conditions. Conditioned medium was collected after 60 min. The effect of conditioned medium on osteoclastogenesis was tested on mouse bone marrow cells in the presence of macrophage colony stimulating factor and receptor activator of NF-kappaB ligand. After 6 days of culture, osteoclast formation and bone resorption was determined. Osteocytes subjected to 1 h pulsating fluid flow produced conditioned medium that inhibited the formation of osteoclasts. For osteoblast PFF-conditioned medium, such effect was, to a lesser extent, also observed, but not for periosteal fibroblast PFF-conditioned medium. Furthermore, PFF-treated osteocytes, but not osteoblast or periosteal fibroblast, produced conditioned medium that resulted in a decreased bone resorption. The NO synthase inhibitor N(G)-nitro-L-arginine methyl ester attenuated the inhibitory effects of osteocyte PFF-conditioned medium on osteoclast formation and resorption. We conclude that osteocytes subjected to PFF inhibit osteoclast formation and resorption via soluble factors, and the release of these factors was at least partially dependent on activation of an NO pathway in osteocytes in response to PFF. Thus, the osteocyte appears to be more responsive to PFF than the osteoblast or periosteal fibroblast regarding to the production of soluble factors affecting osteoclast formation and bone resorption.

Mechanoresponsiveness of human adipose stem cells on nanocomposite and micro-hybrid composite.

Resin-based composites are used for bone repair applications and comprise resin matrix and different sized filler particles. Nanometer-sized filler particles improve composite's mechanical properties compared with micrometer-sized filler particles, but whether differences exist in the biological response to these composites is unknown. Natural bone comprises a nanocomposite structure, and nanoscale interactions with extracellular matrix components influence stem cell differentiation. Therefore we hypothesized that nanometer-sized filler particles in resin-based composites enhance osteogenic differentiation of stem cells showing a more bone cell-like response to mechanical loading compared with micrometer-sized filler particles. Pulsating fluid flow (PFF; 5 Hz, mean shear stress: 0.7 Pa; 1 h) rapidly, within 5 min, increased nitric oxide production in human adipose stem cells (hASCs) on nanocomposite, but not on micro-hybrid composite. PFF increased RUNX2 expression in hASCs on micro-hybrid composite, but not on nanocomposite after 2 h post-incubation. PFF did not affect mean cell orientation and shape index of hASCs on both composites. In conclusion, the PFF-increased nitric oxide production in hASCs on nanocomposite, and increased osteogenic differentiation of hASCs on micro-hybrid composite suggest different responses to mechanical loading of hASCs on composite with nanometer-sized and micrometer-sized filler particles. This might have important implications for bone tissue engineering. © 2017 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 105A: 2986-2994, 2017.

Release of nitric oxide, but not prostaglandin E2, by bone cells depends on fluid flow frequency.

Loading frequency is an important parameter for the stimulation of bone formation in vivo. It is still unclear how the information of external loading characteristics is conveyed to osteoblasts and osteoclasts. Osteocytes are thought to detect mechanical loads by sensing fluid flow through the lacuno-canalicular network within bone and to translate this information into chemical signals. The signaling molecules nitric oxide (NO) and prostaglandin E2 (PGE2) are known to play important roles in the adaptive response of bone to mechanical loads. We have investigated the effects of fluid flow frequency on the production of PGE2 and NO in bone cells in vitro. Pulsatile fluid flow with different frequencies stimulated the release of NO by MC3T3-E1 osteoblasts in a dose-dependent manner. In contrast, PGE2 production was enhanced consistently by all fluid flow regimes, independent of flow frequency. This implies that the NO response may play a role in mediating the differential effects of the various loading patterns on bone.

Adipose tissue-derived mesenchymal stem cells acquire bone cell-like responsiveness to fluid shear stress on osteogenic stimulation.

To engineer bone tissue, mechanosensitive cells are needed that are able to perform bone cell-specific functions, such as (re)modeling of bone tissue. In vivo, local bone mass and architecture are affected by mechanical loading, which is thought to provoke a cellular response via loading-induced flow of interstitial fluid. Adipose tissue is an easily accessible source of mesenchymal stem cells for bone tissue engineering, and is available in abundant amounts compared with bone marrow. We studied whether adipose tissue-derived mesenchymal stem cells (AT-MSCs) are responsive to mechanical loading by pulsating fluid flow (PFF) on osteogenic stimulation in vitro. We found that ATMSCs show a bone cell-like response to fluid shear stress as a result of PFF after the stimulation of osteogenic differentiation by 1,25-dihydroxyvitamin D3. PFF increased nitric oxide production, as well as upregulated cyclooxygenase-2, but not cyclooxygenase-1, gene expression in osteogenically stimulated AT-MSCs. These data suggest that AT-MSCs acquire bone cell-like responsiveness to pulsating fluid shear stress on 1,25-dihydroxyvitamin D3-induced osteogenic differentiation. ATMSCs might be able to perform bone cell-specific functions during bone (re)modeling in vivo and, therefore, provide a promising new tool for bone tissue engineering.

Biocompatibility of Polypyrrole with Human Primary Osteoblasts and the Effect of Dopants.

Polypyrrole (PPy) is a conducting polymer that enables controlled drug release upon electrical stimulation. We characterized the biocompatibility of PPy with human primary osteoblasts, and the effect of dopants. We investigated the biocompatibility of PPy comprising various dopants, i.e. p-toluene sulfonate (PPy-pTS), chondroitin sulfate (PPy-CS), or dodecylbenzenesulfonate (PPy-DBS), with human primary osteoblasts. PPy-DBS showed the roughest appearance of all surfaces tested, and its wettability was similar to the gold-coated control. The average number of attached cells was 45% higher on PPy-DBS than on PPy-CS or PPy-pTS, although gene expression of the proliferation marker Ki-67 was similar in osteoblasts on all surfaces tested. Osteoblasts seeded on PPy-DBS or gold showed similar vinculin attachment points, vinculin area per cell area, actin filament structure, and Feret's diameter, while cells seeded on PPY-CS or PPY-pTS showed disturbed focal adhesions and were enlarged with disorganized actin filaments. Osteoblasts grown on PPy-DBS or gold showed enhanced alkaline phosphatase activity and osteocalcin gene expression, but reduced osteopontin gene expression compared to cells grown on PPy-pTS and PPy-CS. In conclusion, PPy doped with DBS showed excellent biocompatibility, which resulted in maintaining focal adhesions, cell morphology, cell number, alkaline phosphatase activity, and osteocalcin gene expression. Taken together, conducting polymers doped with DBS are well tolerated by osteoblasts. Our results could provide a basis for the development of novel orthopedic or dental implants with controlled release of antibiotics and pharmaceutics that fight infections or focally enhance bone formation in a tightly controlled manner.

Differences in proliferation, differentiation, and cytokine production by bone cells seeded on titanium-nitride and cobalt-chromium-molybdenum surfaces.

Titanium-nitride coating is used to improve cobalt-chromium-molybdenum implant survival in total knee arthroplasty, but its effect on osteoconduction is unknown. Chromium and cobalt ions negatively affect the growth and metabolism of cultured osteoblasts while enhancing osteoclastogenic cytokine production. Therefore, it was hypothesized that a titanium-nitride surface would enhance osteoblast proliferation and/or differentiation and reduce osteoclastogenic cytokine production compared with a cobalt-chromium-molybdenum surface. MC3T3-E1 osteoblasts showed increased proliferation and decreased differentiation on titanium-nitride, while cytokine interleukin-6 production was higher on porous cobalt-chromium-molybdenum (p < 0.05), though interleukin-1ß was occasionally detected on both surfaces. These findings suggest improved osteoconduction on titanium-nitride compared with cobalt-chromium-molybdenum surface.

Pulsating fluid flow modulates gene expression of proteins involved in Wnt signaling pathways in osteocytes.

Strain-derived flow of interstitial fluid activates signal transduction pathways in osteocytes that regulate bone mechanical adaptation. Wnts are involved in this process, but whether mechanical loading modulates Wnt signaling in osteocytes is unclear. We assessed whether mechanical stimulation by pulsating fluid flow (PFF) leads to functional Wnt production, and whether nitric oxide (NO) is important for activation of the canonical Wnt signaling pathway in MLO-Y4 osteocytes. MC3T3-E1 osteoblasts were studied as a positive control for the MLO-Y4 osteocyte response to mechanical loading. MLO-Y4 osteocytes and MC3T3-E1 osteoblasts were submitted to 1-h PFF (0.7 +/- 0.3 Pa, 5 Hz), and postincubated (PI) without PFF for 0.5-3 h. Gene expression of proteins related to the Wnt canonical and noncanonical pathways were studied using real-time polymerase chain reaction (PCR). In MLO-Y4 osteocytes, PFF upregulated gene expression of Wnt3a, c-jun, connexin 43, and CD44 at 1-3-h PI. In MC3T3-E1 osteoblasts, PFF downregulated gene expression of Wnt5a and c-jun at 0.5-3-h PI. In MLO-Y4 osteocytes, gene expression of PFF-induced Wnt target genes was suppressed by the Wnt antagonist sFRP4, suggesting that loading activates the Wnt canonical pathway through functional Wnt production. The NO inhibitor L-NAME suppressed the effect of PFF on gene expression of Wnt target genes, suggesting that NO might play a role in PFF-induced Wnt production. The response to PFF differed in MC3T3-E1 osteoblasts. Because Wnt signaling is important for bone mass regulation, osteocytes might orchestrate loading-induced bone remodeling through, among others, Wnts.

Osteocyte morphology in human tibiae of different bone pathologies with different bone mineral density--is there a role for mechanosensing?

Matrix strains due to external loading are different in bones of different pathologies with different bone mineral density (BMD), and are likely sensed by the osteocytes, the putative bone mechanosensors. The mechanosensitivity of osteocytes appears to be strongly influenced by their morphology. In this study, we explored the possibility that osteocyte morphology might play a role in various bone pathologies with different BMD. Confocal laser scanning microscopy and nano-CT were used to quantitatively determine 3D morphology and alignment of osteocytes and osteocyte lacunae in human proximal tibial bone with relatively low (osteopenic), medium (osteoarthritic), and high (osteopetrotic) BMD. Osteopenic osteocytes were relatively large and round (lengths 8.9:15.6:13.4 microm), osteopetrotic osteocytes were small and discoid shaped (lengths 5.5:11.1:10.8 microm), and osteoarthritic osteocytes were large and elongated (lengths 8.4:17.3:12.2 microm). Osteopenic osteocyte lacunae showed 3.5 fold larger volume and 2.2 fold larger surface area than osteoarthritic lacunae, whereas osteopetrotic lacunae were 1.9 fold larger and showed 1.5 fold larger surface area than osteoarthritic lacunae. Osteopetrotic osteocyte lacunae had lower alignment than osteopenic and osteoarthritic lacunae as indicated by their lower degree of anisotropy. The differences in 3D morphology of osteocytes and their lacunae in long bones of different pathologies with different BMD might reflect an adaptation to matrix strain due to different external loading conditions. Moreover, since direct mechanosensing of matrix strain likely occurs by the cell bodies, the differences in osteocyte morphology and their lacunae might indicate differences in osteocyte mechanosensitivity. The exact relationship between osteocyte morphology and bone architecture, however, is complex and deserves further study.

Osteocytes subjected to pulsating fluid flow regulate osteoblast proliferation and differentiation.

Osteocytes are thought to orchestrate bone remodeling, but it is unclear exactly how osteocytes influence neighboring bone cells. Here, we tested whether osteocytes, osteoblasts, and periosteal fibroblasts subjected to pulsating fluid flow (PFF) produce soluble factors that modulate the proliferation and differentiation of cultured osteoblasts and periosteal fibroblasts. We found that osteocyte PFF conditioned medium (CM) inhibited bone cell proliferation, and osteocytes produced the strongest inhibition of proliferation compared to osteoblasts and periosteal fibroblasts. The nitric oxide (NO) synthase inhibitor N(G)-nitro-L-arginine methyl ester (L-NAME) attenuated the inhibitory effects of osteocyte PFF CM, suggesting that a change in NO release is at least partially responsible for the inhibitory effects of osteocyte PFF CM. Furthermore, osteocyte PFF CM stimulated osteoblast differentiation measured as increased alkaline phosphatase activity, and l-NAME decreased the stimulatory effects of osteocyte PFF CM on osteoblast differentiation. We conclude that osteocytes subjected to PFF inhibit proliferation but stimulate differentiation of osteoblasts in vitro via soluble factors and that the release of these soluble factors was at least partially dependent on the activation of a NO pathway in osteocytes in response to PFF. Thus, the osteocyte appears to be more responsive to PFF than the osteoblast or periosteal fibroblast with respect to the production of soluble signaling molecules affecting osteoblast proliferation and differentiation.