Validation of an LC-MS/MS Method Using Solid-Phase Extraction for the Quantification of 1-84 Parathyroid Hormone: Toward a Candidate Reference Measurement Procedure.

BACKGROUND: Parathyroid hormone (PTH) measurement is important for patients with disorders of calcium metabolism, including those needing bone-turnover monitoring due to chronic kidney disease-mineral bone disorder. There are currently 2 generations of PTH immunoassays on the market, both having cross-reactivity issues and lacking standardization. Therefore, we developed an LC-MS/MS higher-order method for PTH analysis. METHODS: The method was calibrated against the international standard for 1-84 PTH (WHO 95/646). Antibody-free sample preparation with the addition of an isotope-labeled internal standard was performed by solid-phase extraction. Extracts were analyzed by LC-MS/MS. EDTA-K2 plasma was used throughout the development and validation. Bias and uncertainty sources were tested according to ISO 15193. Clinical Laboratory Standards Institute guidelines and reference measurement procedures were consulted for the design of the validation. Patient samples and external quality controls were compared between LC-MS/MS and 2 third-generation immunoassays. RESULTS: The method was validated for 1-84 PTH from 5.7 to 872.6 pg/mL. The interassay imprecision was between 1.2% and 3.9%, and the accuracy ranged from 96.2% to 103.2%. The measurement uncertainty was <5.6%. The comparison between LC-MS/MS and the immunoassays showed a proportional bias but moderate to substantial correlation between methods. CONCLUSIONS: This LC-MS/MS method, which is independent of antibodies, is suitable for a wide range of PTH concentrations. The obtained analytical performance specifications demonstrate that development of a reference measurement procedure will be possible once a higher order reference standard is available.

Development of a sensitive MEKC-LIF method for synthetic cathinones analysis.

Synthetic cathinones are phenylalkylamine compounds related to natural cathinone from Catha edulis leaves. Due to their sympathomimetic effects comparable to common illicit drugs, these substances are mainly drugs of abuse and constitute the second most frequently seized group of new psychoactive substances. In order to ensure their regulation and to promote public health, reliable analytical tools are required to track these substances. In the present study, we developed a CE hyphenated to laser-induced fluorescence detection method to demonstrate its suitability to perform fast and cost-effective synthetic cathinones analysis. Fourteen compounds including isobaric compounds and position isomers were selected to encompass the large panel of chemical structures. To separate the FITC-labeled analytes (presenting the same negative charge and close mass to charge ratios), MEKC separation mode was selected. Method selectivity was not suitable using common surfactants. In this context, alkyl polyethylene glycol ether surfactants were successfully used as neutral surfactant to overcome this analytical challenge. The effect of surfactant nature on separation performances and migration behaviors of the analytes was also studied. Optimal BGE composition included 75 mM borate buffer at pH 9.3 and 0.4 mM of C12E10 surfactant. Final MEKC separation conditions were proposed to analyze a large panel of synthetic cathinones. This method helped to reach a sensitivity with LOD from 0.1 to 0.4 nM (pg/mL order).

Capillary Electrophoresis-Mass Spectrometry at Trial by Metabo-Ring: Effective Electrophoretic Mobility for Reproducible and Robust Compound Annotation.

Capillary zone electrophoresis-mass spectrometry (CE-MS) is a mature analytical tool for the efficient profiling of (highly) polar and ionizable compounds. However, the use of CE-MS in comparison to other separation techniques remains underrepresented in metabolomics, as this analytical approach is still perceived as technically challenging and less reproducible, notably for migration time. The latter is key for a reliable comparison of metabolic profiles and for unknown biomarker identification that is complementary to high resolution MS/MS. In this work, we present the results of a Metabo-ring trial involving 16 CE-MS platforms among 13 different laboratories spanning two continents. The goal was to assess the reproducibility and identification capability of CE-MS by employing effective electrophoretic mobility (µeff) as the key parameter in comparison to the relative migration time (RMT) approach. For this purpose, a representative cationic metabolite mixture in water, pretreated human plasma, and urine samples spiked with the same metabolite mixture were used and distributed for analysis by all laboratories. The µeff was determined for all metabolites spiked into each sample. The background electrolyte (BGE) was prepared and employed by each participating lab following the same protocol. All other parameters (capillary, interface, injection volume, voltage ramp, temperature, capillary conditioning, and rinsing procedure, etc.) were left to the discretion of the contributing laboratories. The results revealed that the reproducibility of the µeff for 20 out of the 21 model compounds was below 3.1% vs 10.9% for RMT, regardless of the huge heterogeneity in experimental conditions and platforms across the 13 laboratories. Overall, this Metabo-ring trial demonstrated that CE-MS is a viable and reproducible approach for metabolomics.

Production and characterization of virus-like particles of grapevine fanleaf virus presenting L2 epitope of human papillomavirus minor capsid protein.

BACKGROUND: Virus-like particle (VLP) platform represents a promising approach for the generation of efficient and immunogenic subunit vaccines. Here, the feasibility of using grapevine fanleaf virus (GFLV) VLPs as a new carrier for the presentation of human papillomavirus (HPV) L2 epitope was studied. To achieve this goal, a model of the HPV L2 epitope secondary structure was predicted and its insertion within 5 external loops in the GFLV capsid protein (CP) was evaluated. RESULTS: The epitope sequence was genetically inserted in the αB-αB" domain C of the GFLV CP, which was then over-expressed in Pichia pastoris and Escherichia coli. The highest expression yield was obtained in E. coli. Using this system, VLP formation requires a denaturation-refolding step, whereas VLPs with lower production yield were directly formed using P. pastoris, as confirmed by electron microscopy and immunostaining electron microscopy. Since the GFLV L2 VLPs were found to interact with the HPV L2 antibody under native conditions in capillary electrophoresis and in ELISA, it can be assumed that the inserted epitope is located at the VLP surface with its proper ternary structure. CONCLUSIONS: The results demonstrate that GFLV VLPs constitute a potential scaffold for surface display of the epitope of interest.

Highly sensitive and selective separation of intact parathyroid hormone and variants by sheathless CE-ESI-MS/MS.

Parathyroid hormone (PTH) is a common clinical marker whose quantification relies on immunoassays, giving variable results as batch, brand, or target epitope changes. Sheathless CE-ESI-MS, combining CE resolution power and low-flow ESI sensitivity, was applied to the analysis of PTH in its native conformation in the presence of related forms. Fused silica and neutral-coated capillaries were investigated, as well as preconcentration methods such as transient isotachophoresis, field-amplified sample injection (FASI), and electrokinetic supercharging (EKS). The method for the separation of PTH and its variants was first developed using fused-silica capillary with UV detection. An acidic BGE was used to separate 1-84 PTH (full length), 7-84 PTH, and 1-34 PTH. Acetonitrile was added to the BGE to reduce peptide adsorption onto the capillary wall and transient isotachophoresis was used as analyte preconcentration method. The method was then transferred to a sheathless CE-ESI-MS instrument. When using a fused silica capillary, CE-MS was limited to µg/mL levels. The use of a neutral coating combined with FASI or EKS allowed a significant increase in sensitivity. Under these conditions, 1-84 PTH, 7-84 PTH, and 1-34 PTH were detected at concentrations in the low ng/mL (FASI) or pg/mL (EKS) range.

Capillary electrophoresis, high-performance liquid chromatography, and thin-layer chromatography analyses of phenolic compounds from rapeseed plants and evaluation of their antioxidant activity.

Rapeseed plants, known for oil production, are also known to contain phenolic compounds such as phenolic acids and flavonoids, with potential antioxidant and anticancer activities. The separation and identification of 11 phenolic acids in rapeseed extracts (including leaves, flowers, Chinese seeds, Belgian seeds, and cake) by capillary electrophoresis were investigated. The results were compared with those obtained with high-performance liquid chromatography and thin-layer chromatography and showed that the capillary electrophoresis technique offers several advantages for the identification of phenolic compounds in various rapeseed extracts. The antioxidant activity of rapeseed extracts and reference compounds was evaluated using four different approaches, namely, 2,2'-azinobis- (3-ethylbenzohiazoline-6-sulfonic acid assay, free radical 2,2-diphenyl-1-picrylhydrazyl assay, electron paramagnetic resonance spectroscopy and the measurement of the total polyphenol content. The contents of total polyphenols in the tested extracts were ranging between 5.4 and 21.1% m/m and ranked as follows: Chinese seeds ˃ Belgian seeds ˃ Flowers ˃ Cake ˃ Leaves.

Separation and determination of alpha-synuclein monomeric and oligomeric species using two electrophoretic approaches.

Parkinson's disease (PD) is a frequent degenerative disorder that is diagnosed based on clinical symptoms. When the first symptoms appear, more than 70% of the dopaminergic cells are already lost. Therefore, it is of utmost importance to have reliable biomarkers to diagnose much earlier PD. In this context, alpha-synuclein (aSyn) is a protein of high interest because of its tendency to form oligomers and amyloid fibrils. The oligomeric forms seem to play a critical pathological role in PD. To date, most of studies aiming at detecting and quantifying aSyn oligomers were performed by immunoassays, mainly by ELISA using specific antibodies. In this study a capillary gel electrophoresis (CGE) coupled with fluorescence detection method was developed to detect and quantify the oligomeric forms of aSyn formed in vitro. All the results obtained were supported by SDS-PAGE analysis, a widely used and well-known technique but exhibiting a main drawback since it is not an automated technique. The repeatability and the intermediate precision of the method were evaluated, as well as the stability of the labeled and non-labeled aSyn samples. After careful screening and optimization of various labeling reagents, 4-fluoro-7-nitrobenzofurazan (NBD-F) was selected and used to establish a calibration curve with monomeric fluorescently-labeled aSyn. Finally, the method was used to study the effect of doxycycline on the oligomerization process. Altogether, our results show that CGE is a very promising automated technique to analyze aSyn monomers, as well as small oligomers.

Single and dual cyclodextrins systems for the enantiomeric and diastereoisomeric separations of structurally related dihydropyridone analogues.

CD capillary electrophoresis methods were developed for complete enantiomeric and diastereoisomeric separations of a series of ten dihydropyridone analogues, of which eight were neutral, one was anionic, and one was cationic. Ten different systems comprising one or two CDs were found to successfully separate the isomers thanks to a screening approach. Among the tested CDs, highly sulfated-γ-CD (HS-γ-CD), either in a single or in a dual system, in a phosphate buffer using capillaries dynamically coated with polyethylene oxide, and SBE-ß-CD, either in a single or in a dual system, in a borate buffer using uncoated capillaries, were the most selective selectors. The effects of different parameters such as the nature and concentration of the CDs, nature and concentration of the buffer, and voltage were examined. The precision and LODs and limits of quantification were evaluated for the optimized methods.

Fully automated electrophoretically mediated microanalysis for CYP1A1 activity monitoring optimized by multivariate approach.

In this study, a fully automated incapillary system was developed to monitor the activity of CYP1A1 (Cytochrome P450, family 1, subfamily A, polypeptide 1) in physiological conditions. Ethoxycoumarin, the selected substrate, undergoes an inline bioreaction in the presence of CYP1A1 supersomes and Nicotinamide adenine dinucleotide phosphate reduced as cofactor, giving rise to hydroxycoumarin, the product that was assayed. The optimization of the experimental conditions was supported by the application of a design of experiment, providing a better understanding of electrophoretic mixing parameters that influence the metabolic reactions. The results obtained in optimal conditions were compared not only to those achieved after offline metabolization but also with liver microsomes. Finally, inhibition studies were conducted showing an important decrease of hydroxycoumarin formation using apigenin as CYP1A1 potent inhibitor. This study demonstrates the usefulness of our inline system for the fully automated in vitro metabolism studies and the screening of new CYP1A1 inhibitors.

Capillary electrophoresis method to determine siRNA complexation with cationic liposomes.

Small interfering RNA (siRNA) inducing gene silencing has great potential to treat many human diseases. To ensure effective siRNA delivery, it must be complexed with an appropriate vector, generally nanoparticles. The nanoparticulate complex requires an optimal physiochemical characterization and the complexation efficiency has to be precisely determined. The methods usually used to measure complexation in gel electrophoresis and RiboGreen® fluorescence-based assay. However, those approaches are not automated and present some drawbacks such as the low throughput and the use of carcinogenic reagents. The aim of this study is to develop a new simple and fast method to accurately quantify the complexation efficiency. In this study, capillary electrophoresis (CE) was used to determine the siRNA complexation with cationic liposomes. The short-end injection mode applied enabled siRNA detection in less than 5 min. Moreover, the CE technique offers many advantages compared with the other classical methods. It is automated, does not require sample preparation and expensive reagents. Moreover, no mutagenic risk is associated with the CE approach since no carcinogenic product is used. Finally, this methodology can also be extended for the characterization of other types of nanoparticles encapsulating siRNA, such as cationic polymeric nanoparticles.

Study of intact virus-like particles of human papillomavirus by capillary electrophoresis.

Virus-like particles of human papillomavirus (HPV-VLP), resulting from the self-assembly of the capsid proteins (L1 or L1 and L2), have been widely used to study HPV as they are similar to the native virion. Moreover, two prophylactic vaccines, Gardasil(®) and Cervarix(®), are based on HPV-VLP L1. Analytical techniques currently used to characterize HPV-VLP, such as SDS-PAGE, Western blot, ELISA, are time-consuming and semiquantitative. In this study, CE was evaluated for the analysis of intact HPV16-VLP. The usefulness of capillary inner wall coating as well as various BGEs, pH, and detergent additives were investigated. Reproducible HPV-VLP analysis in CE was achieved using poly(ethylene oxide)-coated capillary and a BGE containing high salt concentration and low SDS concentration. The developed method enables HPV-VLP detection in less than 10 min (migration times RSD: 1.6%). The identity of HPV-VLP peak was confirmed by comparison with a sample obtained from a wild-type baculovirus and with VLP-based vaccine, Gardasil(®) , after adjuvant dissolution. Finally, we applied the developed methodology to VLP-based vaccines, demonstrating that CE could be successfully used for vaccine quality control.

Analysis of protamine peptides in insulin pharmaceutical formulations by capillary electrophoresis.

Protamines are a group of highly basic peptides that are sometimes added to insulin formulations to prolong the pharmacological action. In this study, different methods were investigated to identify protamine in insulin formulations. Capillary electrophoresis in aqueous and non-aqueous media was tested to separate these peptides with very close amino acid sequences. Different buffers (phosphate or formate, both acidified) and various additives (principally negatively charged and neutral surfactants) were investigated to optimize peptide separation. Finally, a micellar electrokinetic capillary chromatography method using a capillary of 120 cm effective length and an aqueous background electrolyte made up of 100 mM phosphate buffer (pH 2) and 50 mM Thesit® gave the best results, providing the separation of the four major protamine peptides within 25 min.

Separation of human, bovine, and porcine insulins, three very closely related proteins, by micellar electrokinetic chromatography.

Human, bovine, and porcine insulins are small proteins with very closely related amino acid sequences, which makes their separation challenging. In this study, we took advantage of the high-resolution power of CE, and more particularly of micellar electrokinetic chromatography, to separate those biomolecules. Among several surfactants, perfluorooctanoic acid ammonium salt was selected. Then, using a design of experiments approach, the optimal BGE composition was found to consist of 50 mM ammonium acetate pH 9.0, 65 mM perfluorooctanoic acid ammonium salt, and 4% MeOH. The three insulins could be separated within 12 min with a satisfactory resolution. This method could be useful to detect possible counterfeit pharmaceutical formulations. Indeed, it would be easy to determine if human insulin was replaced by bovine or porcine insulin.

Interaction studies between human papillomavirus virus-like particles and laminin 332 by affinity capillary electrophoresis assisted by bio-layer interferometry.

Human papillomavirus (HPV) interacts, in vitro, with laminin 332 (LN332), a key component of the extracellular matrix. In this study, we performed bio-layer interferometry (BLI) and affinity capillary electrophoresis (ACE) to investigate the binding properties of this interaction. Virus-like particles (VLPs), composed of the HPV16 L1 major capsid protein, were used as HPV model and LN332 as the VLPs binding partner. Using BLI, we quantitatively determined the kinetics of the interaction, via the measurement of VLP binding and release from LN332 immobilized onto the surface of aminopropylsilane biosensors. We found an averaged kon of 1.74 x 104 M-1s-1 and an averaged koff of 1.50 x 10-4 s-1. Furthermore, an ACE method was developed to study the interaction under physiological conditions, where the interactants are moving freely in solution, without any fluorescence labeling. Specifically, a constant amount of HPV16-VLPs was preincubated with increasing LN332 concentrations and then the samples were injected in the capillary electrophoresis instrument. A shift in the migration time of the HPV16-VLP/LN332 complexes, carrying an increasing number of LN332 molecules bound per VLP, was observed. The mobility of the complexes was found to decrease with increasing LN332 concentrations in the sample. It was used to quantify stability constant. From BLI and ACE approaches, we reported an apparent equilibrium dissociation constant in the nanomolar range (8.89 nM and 17.7 nM, respectively) for the complex between HPV16-VLPs and LN332.

Unusual amino acids and monofluoroacetate from Dichapetalum michelsonii (Umutambasha), a toxic plant from Rwanda.

In the course of our investigations on Umutambasha in order to identify its convulsant principles, small quantities of monofluoroacetate were observed in stem bark, leaves, and fruits of this plant newly identified as Dichapetalum michelsonii Hauman. Conclusive evidence for a monofluoroacetate presence came from its isolation from the freeze-dried extract of stem bark. Three free unusual amino acids, named N-methyl-α-alanine, N-methyl-ß-alanine, and 2,7-diaminooctan-1,8-dioic acid, described for the first time in a plant, and known trigonelline were also isolated from the stem bark of D. michelsonii. Structure elucidations were mainly achieved by spectroscopic methods (1H-NMR, 2D-NMR, MS) and by comparison with authentic references. These unusual amino acids were detected by a fast, reliable TLC analysis in all our batches of Umutambasha, suggesting that they could be used for identification purposes in case of human or livestock intoxications. Finally, EEG recordings and behavioural observations performed in mice suggested that the convulsive patterns produced by Umutambasha are the consequence of monofluoroacetate presence in D. michelsonii.

Development of 3D printed mini-waffle shapes containing hydrocortisone for children's personalized medicine.

Hydrocortisone is mainly used in the substitution treatment of adrenal insufficiency which results in a dysregulation of cortisol. Compounding of hydrocortisone capsules remains the only low-dose oral treatment suitable for the pediatric population. However, capsules often show non-compliance in mass and content uniformity. Three-dimensional printing offers the prospect of practising personalized medicine for vulnerable patients like children. The goal of this work is to develop low-dose solid oral forms containing hydrocortisone by hot-melt extrusion coupled with fused deposition modeling for the pediatric population. Formulation, design and processes temperatures were optimized to produce printed forms with the desired characteristics. Red mini-waffle shapes containing drug loads of 2, 5 and 8 mg were successfully printed. This new 3D design allow to release more than 80 % of the drug in 45 min indicating a conventional release like the one obtained with capsules. Mass and content uniformity, hardness and friability tests complied with European Pharmacopeia specifications, despite the considerable challenge of the small dimensions of the forms. This study demonstrates that FDM can be used to produce innovative pediatric-friendly printed shapes of an advanced pharmaceutical quality to practice personalize medicine.

A validated microfluidics-based LC-chip-MS/MS method for the quantitation of fluoxetine and norfluoxetine in rat serum.

An increasing number of quantitative bioanalyses need to be performed on samples available in limited volumes, such as pharmacokinetic studies on small animals. In this context, microfluidic systems as the LC-chip device coupled to a mass spectrometer combine small sample volume requirements and high sensitivity. In this study, we present the development of a microfluidics-based method for fluoxetine (FLX) and norfluoxetine (NFL) quantitation dedicated to pharmacokinetic investigations in the rat serum. Using the methodology of experimental design, LC parameters were optimised in terms of peak resolution, analysis time, and sensitivity. An SPE method was then developed for serum samples on miniaturised 96-well plates containing a mixed-mode strong cation exchanger that provided very clean extracts with good analyte recovery (≥66.0%). The total SPE-LC-MS/MS process required only 20 µL per sample and the method provided a good sensitivity in a total run time of 12 min. Finally, the developed method for FLX and NFL quantitation in rat serum was fully validated. After having selected the most appropriate regression model on the basis of the accuracy profiles, method selectivity, trueness, precision, accuracy and linearity were demonstrated.

Development of a generic micellar electrokinetic chromatography method for the separation of 15 antimalarial drugs as a tool to detect medicine counterfeiting.

Since antimalarial drugs counterfeiting is dramatically present on the African market, the development of simple analytical methods for their quality control is of great importance. This work consists in the CE analysis of 15 antimalarials (artesunate, artemether, amodiaquine, chloroquine, piperaquine, primaquine, quinine, cinchonine, mefloquine, halofantrine, sulfadoxine, sulfalen, atovaquone, proguanil, and pyrimethamine). Since all these molecules cannot be ionized at the same pH, MEKC was preferred because it also allows separation of neutral compounds. Preliminary experiments were first carried out to select the most crucial factors affecting the antimalarials separation. Several conditions were tested and four parameters as well as their investigation domain were chosen: pH (5-10), SDS concentration (20-90 mM), ACN proportion (10-40%), and temperature (20-35°C). Then, the experimental design methodology was used and a central composite design was selected. Mathematical modeling of the migration times allowed the prediction of optimal conditions (29°C, pH 6.6, 29 mM SDS, 36% ACN) regarding analyte separation. The prediction at this optimum was verified experimentally and led to the separation of 13 compounds within 8 min. Finally, the method was successfully applied to the quality control of African antimalarial medicines for their qualitative and quantitative content.

Micellar electrokinetic chromatography systems for the separation of mixtures of charged and uncharged compounds.

In this study, the migration behavior of charged and uncharged analytes was investigated under different conditions. Effective mobilities - electrophoretic mobilities under the influence of micelles - of cations, anions, and neutrals were measured at neutral, basic, and acidic pH (7.5, 11, and 2.2) using background electrolytes containing different sodium dodecyl sulfate (SDS) concentrations (0-90 mM) and acetonitrile (ACN) proportions (0-75%). SDS concentration and ACN proportion were found to have a tremendous effect on the effective mobilities and migration order of the model compounds. Although the SDS micelles preferably interact with neutrals and cations, hydrophobic bonds can also occur with anions. Cations, anions, and neutrals having rather different migration behaviors, it is possible to considerably enhance the selectivity of the method by adjusting properly the SDS concentration and the ACN proportion. These observations confirm the interest of using micellar electrokinetic chromatography not only for the separation of neutral substances but also to analyze charged compounds.

Qualitative and quantitative comparison of different commercially available 1-84 parathyroid hormone proteins to the WHO international standard 95/646 using orthogonal methods.

Relative quantitation methods rely on the use of reference substances to determine the content of samples. The aim of this study was to compare 1-84 parathyroid hormone (PTH) standards from different manufacturers to the WHO international standard 95/646. CE and LC with UV detection were investigated as quick and inexpensive quantitation methods, with an emphasis on selectivity between intact 1-84 PTH and its oxidized forms. Both methods were fully validated according to ICH Q2R1. Moreover, method performance was also evaluated according to guidelines defining the maximum allowable measurement uncertainty (MU) of a biological parameter from its intraindividual variation (CVI), as well as the proportion of that MU devoted to the reference material. This study highlighted the fact that some 1-84 PTH standards have a content that is actually twice as high as the one stated on the label, which was confirmed by an amino acid analysis investigation. Our approach offers a quick and inexpensive way to estimate the content of 1-84 PTH standards.