Proton induced activation studies in the carbon steel composites.

The number of accelerator installations has increased significantly in the last decade and requirements are consistently increasing. In these facilities neutrons and high energy charge particle induced reactions are possible with the metallic enclosures made up of natural Fe or steel composites used as structural components or shielding materials. Present study aims to generate a dose rate profile of the induced activations and quantify the induced radionuclide concentrations in the low carbon steel composites. A comparison of the radionuclide concentrations generated in the metallic Fe and SS-304 composite is also presented for a judicious material selection to minimise the radiation concerns.

Calcium scoring in low-dose ungated chest CT scans using convolutional long-short term memory networks.

We aimed to develop a novel deep-learning based method for automatic coronary artery calcium (CAC) quantification in low-dose ungated computed tomography attenuation correction maps (CTAC). In this study, we used convolutional long-short -term memory deep neural network (conv-LSTM) to automatically derive coronary artery calcium score (CAC) from both standard CAC scans and low-dose ungated scans (CT-attenuation correction maps). We trained convLSTM to segment CAC using 9543 scans. A U-Net model was trained as a reference method. Both models were validated in the OrCaCs dataset (n=32) and in the held-out cohort (n=507) without prior coronary interventions who had CTAC standard CAC scan acquired contemporarily. Cohen's kappa coefficients and concordance matrices were used to assess agreement in four CAC score categories (very low: <10, low:10-100; moderate:101-400 and high >400). The median time to derive results on a central processing unit (CPU) was significantly shorter for the conv-LSTM model- 6.18s (inter quartile range [IQR]: 5.99, 6.3) than for UNet (10.1s, IQR: 9.82, 15.9s, p<0.0001). The memory consumption during training was much lower for our model (13.11Gb) in comparison with UNet (22.31 Gb). Conv-LSTM performed comparably to UNet in terms of agreement with expert annotations, but with significantly shorter inference times and lower memory consumption.

Spatio-temporal variations in adult density, abdominal status & indoor resting pattern of Culex quinquefasciatus Say in Panaji, Goa, India.

BACKGROUND & OBJECTIVES: Goa is one of the filariasis endemic states of India. However, information on density pattern and resting behavior of Culex quinquefasciatus Say, the principal vector of filariasis in Goa is lacking. Therefore, current longitudinal study was undertaken to investigate these aspects. METHODS: Panaji was divided into six zones and a total of 240 man hours were spent in 60 fixed catching sites to collect the adult Cx. quinquefasciatus mosquitoes on fortnightly basis from indoor resting sites during 2005-06. The female mosquitoes were classified as unfed, fed, semi-gravid and gravid to ascertain the resting behavior of Cx. quinquefasciatus adults. The data were analysed to evaluate the spatio-temporal variations in adult density, abdominal status and indoor resting sites and linked to meteorological variables like temperature, relative humidity, rainfall and number of rainy days. RESULTS: Cx. quinquefasciatus adults were prevalent perennially in Panaji with highest per man hour density of females (48.6) in February and the lowest density (6.6) in September. Monthly variations in the densities between different months was significant (F=15.3; P<0.05). Rainfall significantly influenced the population of Cx. quinquefasciatus (t=2.63; P<0.05). Fed group and semi-gravid group showed a strong correlation with the relative humidity (P<0.05), rain fall (P<0.05) and number of rainy days (P<0.05). 62.4 per cent of females and 65.1 per cent of males preferred to rest on hanging objects. Spatio-temporal variations in the number of Cx. quinquefasciatus females and males resting on different sites and also the variations in different sites (P<0.05) were significant. INTERPRETATION & CONCLUSION: The density of female Cx. quinquefasciatus encountered in all the months was higher than the estimated tolerated level of density of 34 per ten man hours up to which there is no risk of filariasis transmission. The strong correlation between the abdominal conditions and relative humidity, rainfall and number of rainy days imply that these meteorological variables significantly influenced the feeding and fecundity of the species. 85.3 per cent of the indoor resting population comprising of fed, semi-gravid and gravid females confirmed the endophilic nature of the species. The preferential resting behavior of both females and males on hanging objects suggest that use of insecticide treated long-lasting bed nets as personal protective measure can be exploited to reduce the density of the vector species.

Bone resorption activity of particulate-stimulated macrophages.

Particulate wear debris from bone cement or prosthetic components can stimulate macrophages to cause bone resorption in a dose-dependent manner. This bone resorption activity of particulate-stimulated macrophages is associated with increased levels of both prostaglandin E2 (PGE2) and interleukin-1 (IL-1). In this study we compared the effect of particulate size, concentration, and composition on the secretion of IL-1 and PGE2 by peritoneal macrophages and on the bone-resorbing activity of conditioned medium (CM) harvested from particulate-challenged macrophages. Particulates (titanium, Ti; polymethylmethacrylate, PMMA; and polystyrene, PS) only with phagocytosable size stimulated peritoneal macrophages to secrete IL-1 and PGE2 in a dose- and time-dependent manner. Ti particles (1-3 microns) exhibited significantly enhanced bone-resorbing activity measured as 45Ca release. The maximum bone-resorbing response was observed at a concentration of 0.1% Ti (approximately 10-15 Ti particulates per cell), which also corresponded with the highest IL-1 levels measured in particulate-challenged CM. This was measured using either conditioned media from Ti-stimulated macrophages or in cocultures of calvarial bone and macrophages in the presence of Ti. Exogenous PGE2 and recombinant human IL-1 could significantly increase the 45Ca release; indomethacin (IM) significantly reduced both the spontaneous calcium efflux and active 45Ca release from in vivo labeled calvarial bones. However, IM and/or anti-IL-1 antibodies could suppress only partly the macrophage-mediated bone resorption, indicating that, in a macrophage-bone coculture system, factors other than PGE2 and IL-1 also may regulate particulate-induced bone resorption, probably involving multiple cell types.

Metabolite and enzyme profiles of glycogen metabolism in Methanococcoides methylutens.

When a buffered anaerobic cell suspension of Methanococcoides methylutens was maintained under methanol-limited conditions, intracellular glycogen and hexose phosphates were consumed rapidly and a very small amount of methane formed at 4 h of a starvation period. When methanol was supplemented after a total of 20 h of starvation, a reverse pattern was observed: the glycogen level and the hexose phosphate pool increased, and formation of methane took place after a lag period of 90 min. A considerable amount of methane was formed in 120 min after its detection with a rate of 0.18 micromol mg(-1) protein min(-1). When methane formation decreased after 270 min of incubation and finally came to a halt, probably due to complete assimilation of supplemented methanol, the levels of glycogen and hexose monophosphates decreased once again. However fructose 1,6-diphosphate levels showed a continuous increase even after exhaustion of methane formation. In contrast to the hexose phosphate pool, levels of other metabolites showed a small increase after addition of methanol. The enzyme profile of glycogen metabolism showed relatively high levels of triose phosphate isomerase. Glyceraldehyde 3-phosphate dehydrogenase reacted with NADPH with a three-fold higher activity as compared to that with NADH.

Technique for generating submicrometer ultra high molecular weight polyethylene particles.

Ultra high molecular weight polyethylene wear debris is believed to have a major role in aseptic loosening of prosthetic joints. In order to study the cellular and host response to this and other such particulate debris, a source of fine ultra high molecular weight polyethylene debris is needed. We have described a technique to fracture the GUR 4150 primary ultra high molecular weight polyethylene grain, which reproducibly generated particles less than 1 micron in size. Furthermore, the particle morphology was similar to that of ultra high molecular weight polyethylene particles generated in vivo and retrieved from interfacial tissues. The fabricated polyethylene particles ranged from 0.1 to 33 microns in diameter, with a mean of 2.3 +/- 0.2 micron. Sixty percent of the particles were smaller than 1 micron and 90% were smaller than 7 microns. Using filtration and sedimentation, it is possible to acquire finer particle fractions. These particles are currently being used for biological response studies.

Human monocyte response to particulate biomaterials generated in vivo and in vitro.

We studied the ability of four clinically relevant particle species to stimulate human peripheral blood monocytes to release bone-resorbing agents, including interleukin-1 (both interleukin-1 alpha and interleukin-1 beta), interleukin-6, and prostaglandin E2. The species studied were titanium-6% aluminum-4% vanadium (TiAlV), commercially pure titanium, fabricated ultrahigh molecular weight polyethylene, and polyethylene retrieved from interfacial membranes of failed uncemented total hip arthroplasties. For all species, the mean size was less than 1 micron. Human peripheral blood monocytes were challenged with these particles in a uniform manner on the basis of surface area. Phorbol 12-myristate acetate, zymosan, and nonphagocytosable titanium particles served as controls. Stimulation of human monocytes is a function of the composition and concentration of particles. In this study, TiAlV particles appeared to be the most competent to elicit the synthesis and release of inflammatory mediators. Particles of commercially pure titanium and of fabricated ultrahigh molecular weight polyethylene also could induce the release of various cellular mediators, albeit at a lower level, whereas the particles of polyethylene retrieved from interfacial membranes were less stimulatory in these short-term in vitro experiments.

Composition and morphology of wear debris in failed uncemented total hip replacement.

Interfacial membranes collected at revision from 11 failed uncemented Ti-alloy total hip replacements were examined. Particles in the membranes were characterised by electron microscopy, microchemical spectroscopy and particle size analysis. Most were polyethylene and had a mean size of 0.53 micron +/- 0.3. They were similar to the particles seen in the base resin used in the manufacture of the acetabular implants. Relatively few titanium particles were seen. Fragments of bone, stainless steel and silicate were found in small amounts. Most of the polyethylene particles were too small to be seen by light microscopy. Electron microscopy and spectroscopic techniques are required to provide an accurate description of this debris.

Pathogenesis of bone loss after total hip arthroplasty.

Bone loss with or without evidence of aseptic loosening is a long term complication after total hip arthroplasty (THA). It occurs with all materials and in all prosthetic systems in use or that have been used to date. Bone loss after THA can be a serious problem in revision surgery because bone deficiencies may limit reconstructive options, increase the difficulty of surgery, and necessitate autogenous or allogenic bone grafting. There are three factors adversely affecting maintenance of bone mass after THA: (1) bone loss secondary to particulate debris; (2) adaptive bone remodeling and stress shielding secondary to size, material properties, and surface characteristics of contemporary prostheses; and (3) bone loss as a consequence of natural aging. This chapter reviews the mechanisms of the primary causes of bone loss after THA.

Directional distribution of the ambient neutron dose equivalent from 145-MeV ¹9F projectiles incident on thick Al target.

The directional distribution of the ambient neutron dose equivalent from 145-MeV (19)F projectiles bombarding a thick aluminium target is measured and analysed. The measurements are carried out with a commercially available dose equivalent meter at 0°, 30°, 60° and 90° with respect to the beam direction. The experimental results are compared with calculated doses from EMPIRE nuclear reaction code and different empirical formulations proposed by others. The results are also compared with the measured data obtained from an earlier experiment at a lower projectile energy of 110 MeV for the same target-projectile combination.

Direction distribution of ambient neutron dose equivalent from 20 MeV protons incident on thick Be and Cu targets.

Ambient neutron dose equivalent from 20 MeV protons incident on thick Be and Cu targets are measured at 0 degrees, 30 degrees, 60 degrees and 90 degrees with respect to the beam direction using a conventional dose equivalent meter. The neutron spectra calculated using nuclear reaction model codes ALICE, PRECO and earlier reported empirical expressions are converted to the ambient dose equivalent using the ICRP fluence-to-dose conversion coefficients and are compared with the measured values. The experimental energy spectra reported in the literature for 19.08 MeV protons incident on a thick Be target are also converted to ambient neutron dose equivalent and are compared with the present experimental results. It is observed that the values estimated from the neutron spectra obtained from the nuclear reaction codes are unable to predict the measured values. The results obtained from the reported experimental energy spectra compare well with the results obtained here. An empirical relation that was used to calculate the directional dependence of the measured neutron dose equivalent from heavy ion-induced reactions is used in this study to check its effectiveness for proton-induced reactions.

Histological and histochemical studies on the testicular cycle of a fresh water teleost Channa gachua (Hamilton).

The male reproductive cycle of Channa gachua from fresh water tanks around Dharwad (North 15 degrees 27' latitude, East 75 degrees 01' longitude) is investigated by a) recording the gonosomatic index, every month, over a period 2 consecutive years and b) studying the histological structure of the testis during this period. Based on this study, the fish is suggested to breed twice in a year. The 1st breeding phase coincides with the South-West monsoons and the 2nd with the convectional rains in the month of March. Though C. gachua shows 2 breeding periods, the spermatogenic activity is a continuous process in this fish. The presence of delta 5-3 beta-hydroxysteroid dehydrogenase (delta 5-3 beta-HSDH) and Glucose-6-phosphate dehydrogenase (G-6-PDH) is demonstrated in the interstitial tissue which indicates its steroidogenic potential.

Decreased neutrophil respiratory burst on exposure to cobalt-chrome alloy and polystyrene in vitro.

The effect of biomaterials on the superoxide-producing ability of neutrophils was studied. Human peripheral blood neutrophils were incubated with cobalt-base alloy (F-75) or polystyrene beads of a nonphagocytosable size. Respiratory burst activity was studied by measuring superoxide dismutase inhibitable reduction of cytochrome C. Neutrophils were found to release no more superoxide anion on incubation for up to 3 h with either material in a protein-free medium than controls without foreign material. However, the ability of neutrophils incubated with either biomaterial to subsequently respond to phorbol myristate acetate challenge was decreased (p less than 0.05). Chemical analysis of supernatants for the F-75 samples showed a high concentration of cobalt in the medium within 1 h of incubation. Minimal chromium and nickel was detected. No correlation could be demonstrated between metal in solution and the respiratory burst defect in neutrophils. Instead it appears that interaction of cells with either surface was the critical event in altering the response to phorbol myristate acetate. This observed functional defect may play an important role in rendering tissue around implanted biomaterials susceptible to infections.

Human neutrophil response to short-term exposure to F-75 cobalt-based alloy.

The effect of biomaterials on the activation of human neutrophils was studied. Human neutrophils were incubated with F-75 cobalt-based alloy or polystyrene microspheres of a nonphagocytosable size with two times total neutrophil plane surface area. Scanning and transmission electron microscope (SEM, TEM), energy dispersive x-ray microanalysis (EDX), and graphite furnace atomic absorption spectroscopy (GFAAS) were used to analyze changes in cellular morphology and metal content. This report presents evidence that human PMNs display morphological changes related to foreign material challenge, including activation on F-75 bead surfaces, pinocytosis of corrosion products, formation of intracellular vacuoles, degranulation, etc. Moreover, when PMNs were present, the corrosion release rate of F-75 increased as much as three times over cell-free controls.