RESUMO
A battery is composed of two electrodes that depend on and interact with each other. However, galvanostatic charging-discharging measurement, the most widely used method for battery evaluation, cannot simultaneously reflect performance metrics [capacity, Coulombic efficiency (CE), and cycling stability] of both electrodes because the result is generally governed by the lower-capacity electrode of the cell, namely the limiting reagent of the battery reaction. In studying stoichiometric Li-S cells operating under application-relevant high-mass-loading and lean-electrolyte conditions, we take advantage of the two-stage discharging behavior of sulfur to construct a simple framework that allows us to analyze both electrodes simultaneously. The cell capacity and its decay are anode performance descriptors, whereas the first plateau capacity and cell CE are cathode performance descriptors. Our analysis within this frame identifies Li stripping/plating and polysulfide shuttling to be the limiting factors for the cycling performance of the stoichiometric Li-S cell. Using our newly developed framework, we examine various previously reported strategies to mitigate these bottleneck problems and find modifying the separator with a reduced graphene oxide layer to be an effective means, which improves the capacity retention rate of the cell to 99.7% per cycle.
RESUMO
Efficient and stable photoelectrochemical reduction of CO2 into highly reduced liquid fuels remains a formidable challenge, which requires an innovative semiconductor/catalyst interface to tackle. In this study, we introduce a strategy involving the fabrication of a silicon micropillar array structure coated with a superhydrophobic fluorinated carbon layer for the photoelectrochemical conversion of CO2 into methanol. The pillars increase the electrode surface area, improve catalyst loading and adhesion without compromising light absorption, and help confine gaseous intermediates near the catalyst surface. The superhydrophobic coating passivates parasitic side reactions and further enhances local accumulation of reaction intermediates. Upon one-electron reduction of the molecular catalyst, the semiconductor-catalyst interface changes from adaptive to buried junctions, providing a sufficient thermodynamic driving force for CO2 reduction. These structures together create a unique microenvironment for effective reduction of CO2 to methanol, leading to a remarkable Faradaic efficiency reaching 20% together with a partial current density of 3.4 mA cm-2, surpassing the previous record based on planar silicon photoelectrodes by a notable factor of 17. This work demonstrates a new pathway for enhancing photoelectrocatalytic CO2 reduction through meticulous interface and microenvironment tailoring and sets a benchmark for both Faradaic efficiency and current density in solar liquid fuel production.
RESUMO
Tropospheric ozone (O3 ) is a phytotoxic air pollutant adversely affecting plant growth. High O3 exposures are often concurrent with summer drought. The effects of both stresses on plants are complex, and their interactions are not yet well understood. Here, we investigate whether drought can mitigate the negative effects of O3 on plant physiology and growth based on a meta-analysis. We found that drought mitigated the negative effects of O3 on plant photosynthesis, but the modification of the O3 effect on the whole-plant biomass by drought was not significant. This is explained by a compensatory response of water-deficient plants that leads to increased metabolic costs. Relative to water control condition, reduced water treatment decreased the effects of O3 on photosynthetic traits, and leaf and root biomass in deciduous broadleaf species, while all traits in evergreen coniferous species showed no significant response. This suggested that the mitigating effects of drought on the negative impacts of O3 on the deciduous broadleaf species were more extensive than on the evergreen coniferous ones. Therefore, to avoid over- or underestimations when assessing the impact of O3 on vegetation growth, soil moisture should be considered. These results contribute to a better understanding of terrestrial ecosystem responses under global change.
Assuntos
Ecossistema , Ozônio , Secas , Ozônio/toxicidade , Fotossíntese , Folhas de Planta/fisiologia , PlantasRESUMO
OBJECTIVES: To assess image quality and liver metastasis detection of reduced-dose dual-energy CT (DECT) with deep learning image reconstruction (DLIR) compared to standard-dose single-energy CT (SECT) with DLIR or iterative reconstruction (IR). METHODS: In this prospective study, two groups of 40 participants each underwent abdominal contrast-enhanced scans with full-dose SECT (120-kVp images, DLIR and IR algorithms) or reduced-dose DECT (40- to 60-keV virtual monochromatic images [VMIs], DLIR algorithm), with 122 and 106 metastases, respectively. Groups were matched by age, sex ratio, body mass index, and cross-sectional area. Noise power spectrum of liver images and task-based transfer function of metastases were calculated to assess the noise texture and low-contrast resolution. The image noise, signal-to-noise ratios (SNR) of liver and portal vein, liver-to-lesion contrast-to-noise ratio (LLR), lesion conspicuity, lesion detection rate, and the subjective image quality metrics were compared between groups on 1.25-mm reconstructed images. RESULTS: Compared to 120-kVp images with IR, 40- and 50-keV VMIs with DLIR showed similar noise texture and LLR, similar or higher image noise and low-contrast resolution, improved SNR and lesion conspicuity, and similar or better perceptual image quality. When compared to 120-kVp images with DLIR, 50-keV VMIs with DLIR had similar low-contrast resolution, SNR, LLR, lesion conspicuity, and perceptual image quality but lower frequency noise texture and higher image noise. For the detection of hepatic metastases, reduced-dose DECT by 34% maintained observer lesion detection rates. CONCLUSION: DECT assisted with DLIR enables a 34% dose reduction for detecting hepatic metastases while maintaining comparable perceptual image quality to full-dose SECT. CLINICAL RELEVANCE STATEMENT: Reduced-dose dual-energy CT with deep learning image reconstruction is as accurate as standard-dose single-energy CT for the detection of liver metastases and saves more than 30% of the radiation dose. KEY POINTS: ⢠The 40- and 50-keV virtual monochromatic images (VMIs) with deep learning image reconstruction (DLIR) improved lesion conspicuity compared with 120-kVp images with iterative reconstruction while providing similar or better perceptual image quality. ⢠The 50-keV VMIs with DLIR provided comparable perceptual image quality and lesion conspicuity to 120-kVp images with DLIR. ⢠The reduction of radiation by 34% by DLIR in low-keV VMIs is clinically sufficient for detecting low-contrast hepatic metastases.
Assuntos
Aprendizado Profundo , Neoplasias Hepáticas , Humanos , Estudos Prospectivos , Neoplasias Hepáticas/diagnóstico por imagem , Tomografia Computadorizada por Raios X/métodos , Algoritmos , Interpretação de Imagem Radiográfica Assistida por Computador/métodos , Doses de Radiação , Processamento de Imagem Assistida por Computador/métodosRESUMO
OBJECTIVE: This study aimed to evaluate the image quality and lesion conspicuity of the deep learning image reconstruction (DLIR) algorithm compared with standard image reconstruction algorithms on abdominal enhanced computed tomography (CT) scanning with a wide range of body mass indexes (BMIs). METHODS: A total of 112 participants who underwent contrast-enhanced abdominal CT scans were divided into three groups according to BMIs: the 80-kVp group (BMI ≤ 23.9 kg/m2), 100-kVp group (BMI 24-28.9 kg/m2), and 120-kVp group (BMI ≥ 29 kg/m2). All images were reconstructed using filtered back projection (FBP), adaptive statistical iterative reconstruction-V of 50% level (IR), and DLIR at low, medium, and high levels (DL, DM, and DH, respectively). Subjective noise, artifact, overall image quality, and low- and high-contrast hepatic lesion conspicuity were all graded on a 5-point scale. The CT attenuation value (in HU), image noise, and contrast-to-noise ratio (CNR) were quantified and compared. RESULTS: DM and DH improved the qualitative and quantitative parameters compared with FBP and IR for all three BMI groups. DH had the lowest image noise and highest CNR value, while DM had the highest subjective overall image quality and low- and high-contrast lesion conspicuity scores for the three BMI groups. Based on the FBP, the improvement in image quality and lesion conspicuity of DM and DH images was greater in the 80-kVp group than in the 100-kVp and 120-kVp groups. CONCLUSION: For all BMIs, DLIR improves both image quality and hepatic lesion conspicuity, of which DM would be the best choice to balance both. CLINICAL RELEVANCE STATEMENT: The study suggests that utilizing DLIR, particularly at the medium level, can significantly enhance image quality and lesion visibility on abdominal CT scans across a wide range of BMIs. KEY POINTS: ⢠DLIR improved the image quality and lesion conspicuity across a wide range of BMIs. ⢠DLIR at medium level had the highest subjective parameters and lesion conspicuity scores among all reconstruction levels. ⢠On the basis of the FBP, the 80-kVp group had improved image quality and lesion conspicuity more than the 100-kVp and 120-kVp groups.
Assuntos
Aprendizado Profundo , Humanos , Índice de Massa Corporal , Tomografia Computadorizada por Raios X/métodos , Algoritmos , Imagens de Fantasmas , Interpretação de Imagem Radiográfica Assistida por Computador/métodos , Doses de Radiação , Processamento de Imagem Assistida por ComputadorRESUMO
OBJECTIVES: To develop a CT-based radiomics model for preoperative prediction of lymph node (LN) metastasis in perihilar cholangiocarcinoma (pCCA). METHODS: The study enrolled consecutive pCCA patients from three independent Chinese medical centers. The Boruta algorithm was applied to build the radiomics signature for the primary tumor and LN. The k-means algorithm was employed to cluster the selected LNs based on the radiomics signature LN. Support vector machines were used to construct the prediction models. The diagnostic efficiency was measured by the area under the receiver operating characteristic curve (AUC). The optimal model was evaluated in terms of calibration, clinical usefulness, and prognostic value. RESULTS: A total of 214 patients were included in the study (mean age: 61.6 years ± 9.4; 130 male). The selected LNs were classified into two clusters, which were significantly correlated with LN metastasis in all cohorts (p < 0.001). The model incorporated the clinical risk factors, radiomics signature primary tumor, and the LN cluster obtained the best discrimination, with AUC values of 0.981 (95% CI: 0.962-1), 0.896 (95% CI: 0.810-0.982), and 0.865 (95% CI: 0.768-0.961) in the training, internal validation, and external validation cohorts, respectively. High-risk patients predicted by the optimal model had shorter overall survival than low-risk patients (median, 13.7 vs. 27.3 months, p < 0.001). CONCLUSIONS: The study proposed a radiomics model with good performance to predict LN metastasis in pCCA. As a noninvasive preoperative prediction tool, this model may help in patient risk stratification and personalized treatment. CLINICAL RELEVANCE STATEMENT: A CT-based radiomics model accurately predicts lymph node metastasis in perihilar cholangiocarcinoma patients. This noninvasive preoperative tool can aid in patient risk stratification and personalized treatment, potentially improving patient outcomes. KEY POINTS: ⢠The radiomics model based on contrast-enhanced CT is a useful tool for preoperative prediction of lymph node metastasis in perihilar cholangiocarcinoma. ⢠Radiomics features extracted from lymph nodes show great potential for predicting lymph node metastasis. ⢠The study is the first to identify a lymph node phenotype with a high probability of metastasis based on radiomics.
Assuntos
Neoplasias dos Ductos Biliares , Tumor de Klatskin , Humanos , Masculino , Pessoa de Meia-Idade , Metástase Linfática/patologia , Tumor de Klatskin/diagnóstico por imagem , Tumor de Klatskin/cirurgia , Radiômica , Estudos Retrospectivos , Tomografia Computadorizada por Raios X/métodos , Linfonodos/patologia , Neoplasias dos Ductos Biliares/diagnóstico por imagem , Neoplasias dos Ductos Biliares/cirurgia , Neoplasias dos Ductos Biliares/patologiaRESUMO
OBJECTIVE: This study evaluated the association between admission MCV and preoperative deep vein thrombosis (DVT) in geriatric hip fractures. METHODS: Older adult patients with hip fractures were screened between January 2015 and September 2019. The demographic and clinical characteristics of the patients were collected at the largest trauma center in northwest China. MCV was measured at admission and converted into a categorical variable according to the quartile. Multivariate binary logistic regression and generalized additive model were used to identify the linear and nonlinear association between MCV and preoperative DVT. Analyses were performed using EmpowerStats and the R software. RESULTS: A total of 1840 patients who met the criteria were finally enrolled and divided into four groups according to their MCV levels. The mean MCV was 93.82 ± 6.49 (80.96 to 105.91 fL), and 587 patients (31.9%) were diagnosed with preoperative DVT. When MCV was a continuous variable, the incidence of preoperative DVT increased with mean corpuscular volume. In the fully adjusted model, admission MCV was positively correlated with the incidence of preoperative DVT (OR: 1.03; 95% CI: 1.01-1.05; P = 0.0013). After excluding the effect of other factors, each additional 1fL of MCV increased the prevalence of preoperative DVT by 1.03 times as a continuous variable. CONCLUSION: MCV was linearly associated with preoperative DVT in geriatric patients with hip fractures and could be considered a predictor of DVT risk. The MCV may contribute to risk assessment and preventing adverse outcomes in the elderly. STUDY REGISTRATION: This study is registered on the website of the Chinese Clinical Trial Registry (ChiCTR: ChiCTR2200057323).
Assuntos
Fraturas do Quadril , Trombose Venosa , Idoso , Humanos , Índices de Eritrócitos , Fraturas do Quadril/epidemiologia , Fraturas do Quadril/cirurgia , Estudos Retrospectivos , Trombose Venosa/epidemiologiaRESUMO
PURPOSE: Under-foot impact loadings can cause serious lower limb injuries in many activities, such as automobile collisions and underbody explosions to military vehicles. The present study aims to compare the biomechanical responses of the mainstream vehicle occupant dummies with the human body lower limb model and analyze their robustness and applicability for assessing lower limb injury risk in under-foot impact loading environments. METHODS: The Hybrid III model, the test device for human occupant restraint (THOR) model, and a hybrid human body model with the human active lower limb model were adopted for under-foot impact analysis regarding different impact velocities and initial lower limb postures. RESULTS: The results show that the 2 dummy models have larger peak tibial axial force and higher sensitivity to the impact velocities and initial postures than the human lower limb model. In particular, the Hybrid III dummy model presented extremely larger peak tibial axial forces than the human lower limb model. In the case of minimal difference in tibial axial force, Hybrid III's tibial axial force (7.5 KN) is still 312.5% that of human active lower limb's (2.4 KN). Even with closer peak tibial axial force values, the biomechanical response curve shapes of the THOR model show significant differences from the human lower limb model. CONCLUSION: Based on the present results, the Hybrid III dummy cannot be used to evaluate the lower limb injury risk in under-foot loading environments. In contrast, potential improvement in ankle biofidelity and related soft tissues of the THOR dummy can be implemented in the future for better applicability.
Assuntos
Acidentes de Trânsito , Humanos , Fenômenos Biomecânicos , Acidentes de Trânsito/prevenção & controle , Manequins , Extremidade Inferior/fisiologia , Suporte de CargaRESUMO
The increasing ground-level ozone (O3) is threatening food security, especially in Asian areas, where rice is one of the most important staple crops. O3 impacts on rice could be exacerbated by its spatiotemporal heterogeneity. To improve evaluation accuracy and develop effective adaptations, direct data is urgently needed. Studies on the short-term effects of O3 on rice grain, however, are lacking. Which may lead to an underestimation of the O3 impacts. Through a field experiment, we studied the responses of grain nitrogen, grain carbon, and grain protein in rice cultivars to elevated concentrations of O3 (40 ppb plus that in background air, eO3), especially examining the effects of short-term eO3 during different plant growth stages. We found that long-term eO3 increased grain nitrogen by 29.29% in a sensitive rice cultivar, and short-term eO3 at the tillering and jointing stages increased grain nitrogen by 19.31%, and the grain carbon to nitrogen ratio was decreased by 14.70%, and 21.14% by short-term and long-term eO3. Here we demonstrate that short-term eO3 may significantly affect the chemical composition of rice grains. Previous evaluations of the effects of eO3 may be underestimated. Moreover, changes in the grain nitrogen and grain protein were greater when the short-term eO3 was added to rice plants during the tillering and jointing stage, compared to heading and ripening stage. These results suggest that to improve the tolerance of rice to eO3 to achieve food security, studies on cultivar screening, as well as developing growth-stage-specific adaptations are needed in future.
Assuntos
Poluentes Atmosféricos , Nitrogênio , Oryza , Ozônio , Oryza/crescimento & desenvolvimento , Poluentes Atmosféricos/análise , Poluentes Atmosféricos/toxicidade , Nitrogênio/análise , Grão Comestível/química , Carbono/análise , Monitoramento AmbientalRESUMO
Polypeptides, as natural polyelectrolytes, are assembled into tailored proteins to integrate chromophores and catalytic sites for photosynthesis. Mimicking nature to create the water-soluble nanoassemblies from synthetic polyelectrolytes and photocatalytic molecular species for artificial photosynthesis is still rare. Here, we report the enhancement of the full-spectrum solar-light-driven H2 production within a supramolecular system built by the co-assembly of anionic metalloporphyrins with cationic polyelectrolytes in water. This supramolecular photocatalytic system achieves a H2 production rate of 793 and 685â µmol h-1 g-1 over 24â h with a combination of Mg or Zn porphyrin as photosensitizers and Cu porphyrin as a catalyst, which is more than 23â times higher than that of free molecular controls. With a photosensitizer to catalyst ratio of 10000 : 1, the highest H2 production rate of >51,700â µmol h-1 g-1 with a turnover number (TON) of >1,290 per molecular catalyst was achieved over 24â h irradiation. The hierarchical self-assembly not only enhances photostability through forming ordered stackings of the metalloporphyrins but also facilitates both energy and electron transfer from antenna molecules to catalysts, and therefore promotes the photocatalysis. This study provides structural and mechanistic insights into the self-assembly enhanced photostability and catalytic performance of supramolecular photocatalytic systems.
RESUMO
Carbon nitride materials can be hosts for transition metal sites, but Mössbauer studies on iron complexes in carbon nitrides have always shown a mixture of environments and oxidation states. Here we describe the synthesis and characterization of a crystalline carbon nitride with stoichiometric iron sites that all have the same environment. The material (formula C6N9H2Fe0.4Li1.2Cl, abbreviated PTI/FeCl2) is derived from reacting poly(triazine imide)·LiCl (PTI/LiCl) with a low-melting FeCl2/KCl flux, followed by anaerobic rinsing with methanol. X-ray diffraction, X-ray absorption and Mössbauer spectroscopies, and SQUID magnetometry indicate that there are tetrahedral high-spin iron(II) sites throughout the material, all having the same geometry. The material is active for electrocatalytic nitrate reduction to ammonia, with a production rate of ca. 0.1 mmol cm-2 h-1 and Faradaic efficiency of ca. 80% at -0.80 V vs RHE.
RESUMO
Ethylenediurea (EDU) can effectively mitigate the crop yield loss caused by ozone (O3), a major, phytotoxic air pollutant. However, the relevant mechanisms are poorly understood, and the effect of EDU on soil ecosystems has not been comprehensively examined. In this study, a hybrid rice variety (Shenyou 63) was cultivated under ambient O3 and sprayed with 450 ppm EDU or water every 10 days. Real time quantitative polymerase chain reaction (RT-qPCR) showed that EDU had no significant effect on the microbial abundance in either rhizospheric or bulk soils. By applying both metagenomic sequencing and the direct assembly of nitrogen (N)-cycling genes, EDU was found to decrease the abundance of functional genes related to nitrification and denitrification processes. Moreover, EDU increased the abundance of genes involved in N-fixing. Although the abundance of some functional genes did not change significantly, nonmetric multidimensional scaling (NMDS) and a principal coordinates analysis (PCoA) suggested that the microbial community structure involved in N cycling was altered by EDU. The relative abundances of nifH-and norB-harboring microbial genera in the rhizosphere responded differently to EDU, suggesting the existence of functional redundancy, which may play a key role in sustaining microbially mediated N-cycling under ambient O3. IMPORTANCE Ethylenediurea (EDU) is hitherto the most efficient phytoprotectant agent against O3 stress. However, the underlying biological mechanisms of its mode of action are not clear, and the effects of EDU on the environment are still unknown, limiting its large-scale application in agriculture. Due to its sensitivity to environmental changes, the microbial community can be used as an indicator to assess the environmental impacts of agricultural practices on soil quality. This study aimed to unravel the effects of EDU spray on the abundance, community structure, and ecological functions of microbial communities in the rhizosphere of rice plants. Our study provides a deep insight into the impact of EDU spray on microbial-mediated N cycling and the structure of N-cycling microbial communities. Our findings help to elucidate the mode of action of EDU in alleviating O3 stress in crops from the perspective of regulating the structure and function of the rhizospheric soil microbial community.
Assuntos
Microbiota , Oryza , Ozônio , Solo/química , Ozônio/farmacologia , Microbiologia do Solo , NitrogênioRESUMO
In past decades, regular porous architectures have received a great amount of attention because of their versatile functions and applications derived from their efficient adsorption of various guests. However, most reported porous architectures exist only in the solid state. Therefore, their applications as biomaterials may face several challenges, such as phase separation, slow degradation, and long-term accumulation in the body. This Account summarizes our efforts with respect to the development and biomedical applications of water-soluble 3D diamondoid supramolecular organic frameworks (dSOFs), a family of supramolecular polymers that possess intrinsic regular nanoscale porosity.dSOFs have been constructed from tetratopic components and cucurbit[8]uril (CB[8]) through hydrophobically driven encapsulation by CB[8] for intermolecular dimers formed by peripheral aromatic subunits of the tetratopic components in water. All dSOFs exhibit porosity regularity or periodicity in aqueous solution, which is confirmed by solution-phase synchrotron SAXS and XRD experiments. Dynamic light scattering (DLS) reveals that their sizes range from 50 to 150 nm, depending on the concentrations of the components. As nonequilibrium supramolecular architectures, dSOFs can maintain their nanoscale sizes at micromolar concentrations for dozens of hours. Their diamondoid pores have aperture sizes ranging from 2.1 to 3.6 nm, whereas their water solubility and porosity regularity allow them to rapidly include discrete guests driven by ion-pair electrostatic attraction, hydrophobicity, or a combination of the two interactions. The guests may be small molecule or large macromolecular drugs, photodynamic agents (PDAs), or DNA.The rapid inclusion of bioactive guests into dSOFs has led to two important biofunctions. The first is to function as antidotes through including residual drugs. For heparins, the inclusion results in full neutralization of their anticoagulant activity. For clinically used porphyrin PDAs, the inclusion can alleviate their long-term posttreatment phototoxicity but does not reduce their photodynamic efficacy. The second is to function as in situ loading carriers for the intracellular delivery of antitumor drugs or DNA. Their nanoscale sizes bring out their ability to overcome the multidrug resistance of tumor cells, which leads to a remarkable enhancement of the bioactivity of the included drugs. By conjugating aldoxorubicin to tetrahedral components, albumin-mimicking prodrugs have also been constructed, which conspicuously improves the efficacy of aldoxorubicin toward multi-drug-resistant tumors through the delivery of the frameworks. As new supramolecular drugs and carriers, dSOFs are generally biocompatible. Thus, further efforts might lead to medical benefits in the future.
Assuntos
Nanoporos , Água , Polímeros , Espalhamento a Baixo Ângulo , Difração de Raios XRESUMO
Eleven 2,2'-bipyridine (bpy) ligands functionalized with attachment groups for covalent immobilization on silicon surfaces were prepared. Five of the ligands feature silatrane functional groups for attachment to metal oxide coatings on the silicon surfaces, while six contain either alkene or alkyne functional groups for attachment to hydrogen-terminated silicon surfaces. The bpy ligands were coordinated to Re(CO)5Cl to form complexes of the type Re(bpy)(CO)3Cl, which are related to known catalysts for CO2 reduction. Six of the new complexes were characterized using X-ray crystallography. As proof of principle, four molecular Re complexes were immobilized on either a thin layer of TiO2 on silicon or hydrogen-terminated silicon. The surface-immobilized complexes were characterized using X-ray photoelectron spectroscopy, IR spectroscopy, and cyclic voltammetry (CV) in the dark and for one representative example in the light. The CO stretching frequencies of the attached complexes were similar to those of the pure molecular complexes, but the CVs were less analogous. For two of the complexes, comparison of the electrocatalytic CO2 reduction performance showed lower CO Faradaic efficiencies for the immobilized complexes than the same complex in solution under similar conditions. In particular, a complex containing a silatrane linked to bpy with an amide linker showed poor catalytic performance and control experiments suggest that amide linkers in conjugation with a redox-active ligand are not stable under highly reducing conditions and alkyl linkers are more stable. A conclusion of this work is that understanding the behavior of molecular Re catalysts attached to semiconducting silicon is more complicated than related complexes, which have previously been immobilized on metallic electrodes.
RESUMO
Porous organic polymers (POPs) have attracted increasing attention and emerged as a new research area in polymer chemistry. During the past decade, the intense desirability for application in aqueous scenarios has spawned the development of a specific class of POPs, i.e., water-soluble or dispersible porous organic polymers (WS-POPs) that can allow the implementation of porosity-based functions in aqueous media. In this Tutorial Review, aiming at providing a practical guide to this area, we will discuss recent advances in the preparation of WS-POPs through covalent/dynamic covalent, coordination and supramolecular approaches. As a result of their intrinsic and well-defined porosity, diverse topological architectures as well as unique water-processable features, many water-soluble/dispersible POPs have been demonstrated to exhibit potential for various applications, which include drug, DNA and protein delivery, bioimaging, photocatalysis, explosive detection and membrane separation. We will also highlight the related function of the representative structures. Finally, we provide our perspective for the future research, with a focus on the development of new structures and biofunctions.
Assuntos
Preparações Farmacêuticas , Polímeros , Porosidade , ÁguaRESUMO
With scarce resources, natural Bovis Calculus is expensive and hard to meet clinical demand. At the moment, four kinds of Bovis Calculus are available on the market: the natural product, in vitro cultured product, synthesized product, and the product formed in cow after manual intervention. In this study, papers on the four kinds of Bovis Calculus products and relevant Chinese patent medicines were searched from Web of Science, PubMed, and China National Knowledge Infrastructure(CNKI). CiteSpace, citexs AI, and CNKI were employed for bibliometric analysis and knowledge map analysis. On this basis, the status, trend, and focuses of research on Bovis Calculus and relevant Chinese patent medicines were summarized. The results suggested overall slow development in the research on Bovis Calculus and relevant Chinese patent medicines with three typical growth stages. It is consistent with the development of Bovis Calculus substitutes and the national policy for the development of traditional Chinese medicine. At the moment, the research on Bovis Calculus and relevant Chinese patent medicines has been on the rise. In recent years, there has been an explosion of research on them, particularly the quality control of Bovis Calculus and the Chinese patent medicines, the pharmacological efficacy of Chinese patent medicines, such as Angong Niuhuang Pills, and the comparison of the quality of various Bovis Calculus products. However, there is a paucity of research on the pharmacological efficacy and the mechanism of Bovis Calculus. This medicinal and the relevant Chinese patent medicines have been studied from diverse perspectives and China becomes outstanding in this research field. However, it is still necessary to reveal the chemical composition, pharmacological efficacy, and mechanism through multi-dimensional deep research.
Assuntos
Produtos Biológicos , Medicamentos de Ervas Chinesas , Animais , Bovinos , Feminino , Bibliometria , Medicamentos de Ervas Chinesas/uso terapêutico , Medicina Tradicional Chinesa , Medicamentos sem PrescriçãoRESUMO
Photothermal CO2 reduction is one of the most promising routes to efficiently utilize solar energy for fuel production at high rates. However, this reaction is currently limited by underdeveloped catalysts with low photothermal conversion efficiency, insufficient exposure of active sites, low active material loading, and high material cost. Herein, we report a potassium-modified carbon-supported cobalt (K+ -Co-C) catalyst mimicking the structure of a lotus pod that addresses these challenges. As a result of the designed lotus-pod structure which features an efficient photothermal C substrate with hierarchical pores, an intimate Co/C interface with covalent bonding, and exposed Co catalytic sites with optimized CO binding strength, the K+ -Co-C catalyst shows a record-high photothermal CO2 hydrogenation rate of 758â mmol gcat -1 h-1 (2871â mmol gCo -1 h-1 ) with a 99.8 % selectivity for CO, three orders of magnitude higher than typical photochemical CO2 reduction reactions. We further demonstrate with this catalyst effective CO2 conversion under natural sunlight one hour before sunset during the winter season, putting forward an important step towards practical solar fuel production.
RESUMO
We report a ternary hybrid photocatalyst architecture with tailored interfaces that boost the utilization of solar energy for photochemical CO2 reduction by synergizing electron and heat flows in the photocatalyst. The photocatalyst comprises cobalt phthalocyanine (CoPc) molecules assembled on multiwalled carbon nanotubes (CNTs) that are decorated with nearly monodispersed cadmium sulfide quantum dots (CdS QDs). The CdS QDs absorb visible light and generate electron-hole pairs. The CNTs rapidly transfer the photogenerated electrons from CdS to CoPc. The CoPc molecules then selectively reduce CO2 to CO. The interfacial dynamics and catalytic behavior are clearly revealed by time-resolved and in situ vibrational spectroscopies. In addition to serving as electron highways, the black body property of the CNT component can create local photothermal heating to activate amine-captured CO2 , namely carbamates, for direct photochemical conversion without additional energy input.
RESUMO
We report a precious-metal-free molecular catalyst-based photocathode that is active for aqueous CO2 reduction to CO and methanol. The photoelectrode is composed of cobalt phthalocyanine molecules anchored on graphene oxide which is integrated via a (3-aminopropyl)triethoxysilane linker to p-type silicon protected by a thin film of titanium dioxide. The photocathode reduces CO2 to CO with high selectivity at potentials as mild as 0â V versus the reversible hydrogen electrode (vs RHE). Methanol production is observed at an onset potential of -0.36â V vs RHE, and reaches a peak turnover frequency of 0.18â s-1 . To date, this is the only molecular catalyst-based photoelectrode that is active for the six-electron reduction of CO2 to methanol. This work puts forth a strategy for interfacing molecular catalysts to p-type semiconductors and demonstrates state-of-the-art performance for photoelectrochemical CO2 reduction to CO and methanol.
RESUMO
Selective preparation of two-dimensional polymers (2DPs) and supramolecular polymers (2DSPs) with defined thickness is crucially important for controlling and maximizing their functions, yet it has remained as a synthetic challenge. In the past decade, several approaches have been developed to allow selective preparation of discrete monolayer 2DPs and 2DSPs. Recently, crystal exfoliation and self-assembly strategies have been employed to successfully prepare bilayer 2DP and 2DSP, which represent the first step towards the controlled "growth" of 2D polymers from the thinnest monolayers to thicker few-layers along the third dimension. This Concept review discusses the concept of accurate synthesis of 2D polymers with defined layers. Advances in this research area will pave the way to rational synthetic strategies for 2D polymers with controlled thickness.