Functional anatomy of the wing muscles of the Egyptian fruit bat (Rousettus aegyptiacus) using dissection and diceCT.

Bats are unique among mammals for evolving powered flight. However, very little data are available on the muscle properties and architecture of bat flight muscles. Diffusible iodine contrast-enhanced computed tomography (diceCT) is an established tool for 3D visualisation of anatomy and is becoming a more readily accessible and widely used technique. Here, we combine this technique with gross dissection of the Egyptian fruit bat (Rousettus aegyptiacus) to compare muscle masses, fibre lengths and physiological cross-sectional areas (PCSA) of muscles with published forelimb data from an array of non-flying mammals and flying birds. The Egyptian fruit bat has a highly specialised pectoralis (pars posterior) architecturally optimised to generate power. The elbow flexion/extension muscles (biceps brachii and triceps brachii) have comparable PCSAs to the pectoralis, but shorter fibre lengths, which are optimised to generate large forces. Our data also show that the Egyptian fruit bat is more similar to flying birds than non-flying mammals with its highly disparate muscle architecture. Specifically, the Egyptian fruit bat have uniquely enlarged pectoralis muscles and elbow flexion and extension muscles (bicep brachii and triceps brachii) to aid powered flight. Finally, while the Egyptian fruit bat has a comparable heterogeneity in pectoralis (pars posterior) fibre length across the cranial-caudal axis to that seen in birds, the average normalised fibre length is larger than that seen in any of the surveyed birds. Our data here provide a greater understanding of the anatomy and functional specialisation of the forelimb musculature that powers flight.

Comparative cranial biomechanics in two lizard species: impact of variation in cranial design.

Cranial morphology in lepidosaurs is highly disparate and characterised by the frequent loss or reduction of bony elements. In varanids and geckos, the loss of the postorbital bar is associated with changes in skull shape, but the mechanical principles underlying this variation remain poorly understood. Here, we sought to determine how the overall cranial architecture and the presence of the postorbital bar relate to the loading and deformation of the cranial bones during biting in lepidosaurs. Using computer-based simulation techniques, we compared cranial biomechanics in the varanid Varanus niloticus and the teiid Salvator merianae, two large, active foragers. The overall strain magnitude and distribution across the cranium were similar in the two species, despite lower strain gradients in V. niloticus In S. merianae, the postorbital bar is important for resistance of the cranium to feeding loads. The postorbital ligament, which in varanids partially replaces the postorbital bar, does not affect bone strain. Our results suggest that the reduction of the postorbital bar impaired neither biting performance nor the structural resistance of the cranium to feeding loads in V. niloticus Differences in bone strain between the two species might reflect demands imposed by feeding and non-feeding functions on cranial shape. Beyond variation in cranial bone strain related to species-specific morphological differences, our results reveal that similar mechanical behaviour is shared by lizards with distinct cranial shapes. Contrary to the situation in mammals, the morphology of the circumorbital region, calvaria and palate appears to be important for withstanding high feeding loads in these lizards.

Individual variation of the masticatory system dominates 3D skull shape in the herbivory-adapted marsupial wombats.

BACKGROUND: Within-species skull shape variation of marsupial mammals is widely considered low and strongly size-dependent (allometric), possibly due to developmental constraints arising from the altricial birth of marsupials. However, species whose skulls are impacted by strong muscular stresses - particularly those produced through mastication of tough food items - may not display such intrinsic patterns very clearly because of the known plastic response of bone to muscle activity of the individual. In such cases, allometry may not dominate within-species shape variation, even if it is a driver of evolutionary shape divergence; ordination of shape in a geometric morphometric context through principal component analysis (PCA) should reveal main variation in areas under masticatory stress (incisor region/zygomatic arches/mandibular ramus); but this main variation should emerge from high individual variability and thus have low eigenvalues. RESULTS: We assessed the evidence for high individual variation through 3D geometric morphometric shape analysis of crania and mandibles of three species of grazing-specialized wombats, whose diet of tough grasses puts considerable strain on their masticatory system. As expected, we found little allometry and low Principal Component 1 (PC1) eigenvalues within crania and mandibles of all three species. Also as expected, the main variation was in the muzzle, zygomatic arches, and masticatory muscle attachments of the mandibular ramus. We then implemented a new test to ask if the landmark variation reflected on PC1 was reflected in individuals with opposite PC1 scores and with opposite shapes in Procrustes space. This showed that correspondence between individual and ordinated shape variation was limited, indicating high levels of individual variability in the masticatory apparatus. DISCUSSION: Our results are inconsistent with hypotheses that skull shape variation within marsupial species reflects a constraint pattern. Rather, they support suggestions that individual plasticity can be an important determinant of within-species shape variation in marsupials (and possibly other mammals) with high masticatory stresses, making it difficult to understand the degree to which intrinsic constraints act on shape variation at the within-species level. We conclude that studies that link micro- and macroevolutionary patterns of shape variation might benefit from a focus on species with low-impact mastication, such as carnivorous or frugivorous species.

Cranial biomechanics, bite force and function of the endocranial sinuses in Diprotodon optatum, the largest known marsupial.

The giant extinct marsupial Diprotodon optatum has unusual skull morphology for an animal of its size, consisting of very thin bone and large cranial sinuses that occupy most of the internal cranial space. The function of these sinuses is unknown as there are no living marsupial analogues. The finite element method was applied to identify areas of high and low stress, and estimate the bite force of Diprotodon to test hypotheses on the function of the extensive cranial sinuses. Detailed three-dimensional models of the cranium, mandible and jaw adductor muscles were produced. In addition, manipulations to the Diprotodon cranial model were performed to investigate changes in skull and sinus structure, including a model with no sinuses (sinuses 'filled' with bone) and a model with a midsagittal crest. Results indicate that the cranial sinuses in Diprotodon significantly lighten the skull while still providing structural support, a high bite force and low stress, indicating the cranium may have been able to withstand higher loads than those generated during feeding. Data from this study support the hypothesis that pneumatisation is driven by biomechanical loads and occurs in areas of low stress. The presence of sinuses is likely to be a byproduct of the separation of the outer surface of the skull from the braincase due to the demands of soft tissue including the brain and the large jaw adductor musculature, especially the temporalis. In very large species, such as Diprotodon, this separation is more pronounced, resulting in extensive cranial sinuses due to a relatively small brain compared with the size of the skull.

Comparative finite element analysis of the first thoracic vertebra in artiodactyls.

Artiodactyls exhibit a striking diversity of the cervical vertebral column in terms of length and overall mobility. Using finite element analysis, this study explores the morphology at the cervico-thoracic boundary and its performance under loads in artiodactyls with different habitual neck postures and body sizes. The first thoracic vertebra of 36 species was loaded with (i) a compressive load on the vertebral body to model the weight of the head and neck exerted onto the trunk; and (ii) a tensile load at the spinous process to model the pull via the nuchal ligament. Additional focus was laid on the peculiar shape of the first thoracic vertebra in giraffes. We hypothesized that a habitually upright neck posture should be reflected in the greater ability to withstand compressive loads compared to tensile loads, whereas for species with a habitually suspended posture it should be the opposite. In comparison to species with a suspended posture, species with an upright posture exhibited lower stress (except Giraffidae). For compressive loads in larger species, stress surprisingly increased. Tensile loads in larger species resulted in decreased stress only in species with an intermediate or suspensory neck posture. High stress under tensile loads was mainly reflecting the relative length of the spinous process, while high stress under compressive loads was common in more "bell"-shaped vertebral bodies. The data supports a stability-mobility trade-off at the cervico-thoracic transition in giraffes. Performance under load at the cervico-thoracic boundary is indicative of habitual neck posture and is influenced by body size.

Assessment of the mechanical role of cranial sutures in the mammalian skull: Computational biomechanical modelling of the rat skull.

Cranial sutures are fibrocellular joints between the skull bones that are progressively replaced with bone throughout ontogeny, facilitating growth and cranial shape change. This transition from soft tissue to bone is reflected in the biomechanical properties of the craniofacial complex. However, the mechanical significance of cranial sutures has only been explored at a few localised areas within the mammalian skull, and as such our understanding of suture function in overall skull biomechanics is still limited. Here, we sought to determine how the overall strain environment is affected by the complex network of cranial sutures in the mammal skull. We combined two computational biomechanical methods, multibody dynamics analysis and finite element analysis, to simulate biting in a rat skull and compared models with and without cranial sutures. Our results show that including complex sutures in the rat model does not substantially change overall strain gradients across the cranium, particularly strain magnitudes in the bones overlying the brain. However, local variations in strain magnitudes and patterns can be observed in areas close to the sutures. These results show that, during feeding, sutures may be more important in some regions than others. Sutures should therefore be included in models that require accurate local strain magnitudes and patterns of cranial strain, particularly if models are developed for analysis of specific regions, such as the temporomandibular joint or zygomatic arch. Our results suggest that, for mammalian skulls, cranial sutures might be more important for allowing brain expansion during growth than redistributing biting loads across the cranium in adults.

The evolution of unique cranial traits in leporid lagomorphs.

Background: The leporid lagomorphs (rabbits and hares) are adapted to running and leaping (some more than others) and consequently have unique anatomical features that distinguish them from ochotonid lagomorphs (pikas) and from their rodent relatives. Two traits that have received some attention are fenestration of the lateral wall of the maxilla and facial tilting. These features are known to correlate with specialised locomotory form in that the faster running species will generally have fenestration that occupies the dorsal and the anteroventral surface of the maxillary corpus and a more acute facial tilt angle. Another feature is an intracranial joint that circumscribes the back of the skull, thought to facilitate skull mobility. This joint separates the anterior portion of the cranium (including the dentition, rostrum and orbit) from the posterior portion of the cranium (which encompasses the occipital and the auditory complex). Aside from the observation that the intracranial joint is absent in pikas (generalist locomotors) and appears more elaborate in genera with cursorial and saltatorial locomotory habits, the evolutionary history, biomechanical function and comparative anatomy of this feature in leporids lacks a comprehensive evaluation. Methodology: The present work analysed the intracranial joint, facial tilting and lateral fenestration of the wall of the maxilla in the context of leporid evolutionary history using a Bayesian inference of phylogeny (18 genera, 23 species) and ancestral state reconstruction. These methods were used to gather information about the likelihood of the presence of these three traits in ancestral groups. Results: Our phylogenetic analyses found it likely that the last common ancestor of living leporids had some facial tilting, but that the last common ancestor of all lagomorphs included in the dataset did not. We found that it was likely that the last common ancestor of living leporids had fenestration that occupies the dorsal, but not the anteroventral, surface of the maxillary corpus. We also found it likely that the last common ancestor of living leporids had an intracranial joint, but that the last common ancestor of all living lagomorphs did not. These findings provide a broader context to further studies of evolutionary history and will help inform the formulation and testing of functional hypotheses.

Anomalous plantar intrinsic foot muscle attaching to the medial longitudinal arch: possible mechanism for medial nerve entrapment: a case report.

BACKGROUND: Muscular variations are potentially symptomatic and may complicate imaging interpretation. Intrinsic foot musculature and extrinsic tendon insertion variations are common. Distinct supernumerary muscles are rare. We report a novel anomalous intrinsic foot muscle on the medial longitudinal arch. CASE PRESENTATION: An accessory muscle was encountered on the medial arch of the right foot of a 78-year-old white male cadaver, between layers two and three of the foot intrinsics. It did not appear to be a slip or variant of a known foot muscle. This muscle consisted of two slips that ran transversely on the plantar aspect of the medial arch, crossing the medial transverse tarsal joint and attaching to the tuberosity of the navicular, the short and long plantar ligaments, and spring ligament. CONCLUSIONS: The medial plantar vessels and nerve passed from deep to superficial between the two slips, and this suggests a possible location for medial nerve entrapment.

Computational biomechanical modelling of the rabbit cranium during mastication.

Although a functional relationship between bone structure and mastication has been shown in some regions of the rabbit skull, the biomechanics of the whole cranium during mastication have yet to be fully explored. In terms of cranial biomechanics, the rabbit is a particularly interesting species due to its uniquely fenestrated rostrum, the mechanical function of which is debated. In addition, the rabbit processes food through incisor and molar biting within a single bite cycle, and the potential influence of these bite modes on skull biomechanics remains unknown. This study combined the in silico methods of multi-body dynamics and finite element analysis to compute musculoskeletal forces associated with a range of incisor and molar biting, and to predict the associated strains. The results show that the majority of the cranium, including the fenestrated rostrum, transmits masticatory strains. The peak strains generated over all bites were found to be attributed to both incisor and molar biting. This could be a consequence of a skull shape adapted to promote an even strain distribution for a combination of infrequent incisor bites and cyclic molar bites. However, some regions, such as the supraorbital process, experienced low peak strain for all masticatory loads considered, suggesting such regions are not designed to resist masticatory forces.

Global elongation and high shape flexibility as an evolutionary hypothesis of accommodating mammalian brains into skulls.

Little is known about how the large brains of mammals are accommodated into the dazzling diversity of their skulls. It has been suggested that brain shape is influenced by relative brain size, that it evolves or develops according to extrinsic or intrinsic mechanical constraints, and that its shape can provide insights into its proportions and function. Here, we characterize the shape variation among 84 marsupial cranial endocasts of 57 species including fossils, using three-dimensional geometric morphometrics and virtual dissections. Statistical shape analysis revealed four main patterns: over half of endocast shape variation ranges from elongate and straight to globular and inclined; little allometric variation with respect to centroid size, and none for relative volume; no association between locomotion and endocast shape; limited association between endocast shape and previously published histological cortex volumes. Fossil species tend to have smaller cerebral hemispheres. We find divergent endocast shapes in closely related species and within species, and diverse morphologies superimposed over the main variation. An evolutionarily and individually malleable brain with a fundamental tendency to arrange into a spectrum of elongate-to-globular shapes-possibly mostly independent of brain function-may explain the accommodation of brains within the enormous diversity of mammalian skull form.

Clarifying relationships between cranial form and function in tapirs, with implications for the dietary ecology of early hominins.

Paleontologists and paleoanthropologists have long debated relationships between cranial morphology and diet in a broad diversity of organisms. While the presence of larger temporalis muscle attachment area (via the presence of sagittal crests) in carnivorans is correlated with durophagy (i.e. hard-object feeding), many primates with similar morphologies consume an array of tough and hard foods-complicating dietary inferences of early hominins. We posit that tapirs, large herbivorous mammals showing variable sagittal crest development across species, are ideal models for examining correlations between textural properties of food and sagittal crest morphology. Here, we integrate dietary data, dental microwear texture analysis, and finite element analysis to clarify the functional significance of the sagittal crest in tapirs. Most notably, pronounced sagittal crests are negatively correlated with hard-object feeding in extant, and several extinct, tapirs and can actually increase stress and strain energy. Collectively, these data suggest that musculature associated with pronounced sagittal crests-and accompanied increases in muscle volume-assists with the processing of tough food items in tapirs and may yield similar benefits in other mammals including early hominins.

The multiscale hierarchical structure of Heloderma suspectum osteoderms and their mechanical properties.

Osteoderms are hard tissues embedded in the dermis of vertebrates and have been suggested to be formed from several different mineralized regions. However, their nano architecture and micro mechanical properties had not been fully characterized. Here, using electron microscopy, µ-CT, atomic force microscopy and finite element simulation, an in-depth characterization of osteoderms from the lizard Heloderma suspectum, is presented. Results show that osteoderms are made of three different mineralized regions: a dense apex, a fibre-enforced region comprising the majority of the osteoderm, and a bone-like region surrounding the vasculature. The dense apex is stiff, the fibre-enforced region is flexible and the mechanical properties of the bone-like region fall somewhere between the other two regions. Our finite element analyses suggest that when combined into the osteoderm structure, the distinct tissue regions are able to shield the body of the animal by bearing the external forces. These findings reveal the structure-function relationship of the Heloderma suspectum osteoderm in unprecedented detail. STATEMENT OF SIGNIFICANCE: The structures of bone and teeth have been thoroughly investigated. They provide a basis not only for understanding the mechanical properties and functions of these hard tissues, but also for the de novo design of composite materials. Osteoderms, however, are hard tissues that must possess mechanical properties distinct from teeth and bone to function as a protective armour. Here we provide a detailed analysis of the nanostructure of vertebrate osteoderms from Heloderma suspectum, and show that their mechanical properties are determined by their multiscale hierarchical tissue. We believe this study contributes to advance the current knowledge of the structure-function relationship of the hierarchical structures in the Heloderma suspectum osteoderm. This knowledge might in turn provide a source of inspiration for the design of bioinspired and biomimetic materials.

An assessment of the role of the falx cerebri and tentorium cerebelli in the cranium of the cat (Felis silvestris catus).

The falx cerebri and the tentorium cerebelli are two projections of the dura mater in the cranial cavity which ossify to varying degrees in some mammalian species. The idea that the ossification of these structures may be necessary to support the loads arising during feeding has been proposed and dismissed in the past, but never tested quantitatively. To address this, a biomechanical model of a domestic cat (Felis silvestris catus) skull was created and the material properties of the falx and tentorium were varied for a series of loading regimes incorporating the main masticatory and neck muscles during biting. Under these loading conditions, ossification of the falx cerebri does not have a significant impact on the stress in the cranial bones. In the case of the tentorium, however, a localized increase in stress was observed in the parietal and temporal bones, including the tympanic bulla, when a non-ossified tentorium was modelled. These effects were consistent across the different analyses, irrespective of loading regime. The results suggest that ossification of the tentorium cerebelli may play a minor role during feeding activities by decreasing the stress in the back of the skull.

Comparative finite element analysis of the cranial performance of four herbivorous marsupials.

Marsupial herbivores exhibit a wide variety of skull shapes and sizes to exploit different ecological niches. Several studies on teeth, dentaries, and jaw adductor muscles indicate that marsupial herbivores exhibit different specializations for grazing and browsing. No studies, however, have examined the skulls of marsupial herbivores to determine the relationship between stress and strain, and the evolution of skull shape. The relationship between skull morphology, biomechanical performance, and diet was tested by applying the finite element method to the skulls of four marsupial herbivores: the common wombat (Vombatus ursinus), koala (Phascolarctos cinereus), swamp wallaby (Wallabia bicolor), and red kangaroo (Macropus rufus). It was hypothesized that grazers, requiring stronger skulls to process tougher food, would have higher biomechanical performance than browsers. This was true when comparing the koala and wallaby (browsers) to the wombat (a grazer). The cranial model of the wombat resulted in low stress and high mechanical efficiency in relation to a robust skull capable of generating high bite forces. However, the kangaroo, also a grazer, has evolved a very different strategy to process tough food. The cranium is much more gracile and has higher stress and lower mechanical efficiency, but they adopt a different method of processing food by having a curved tooth row to concentrate force in a smaller area and molar progression to remove worn teeth from the tooth row. Therefore, the position of the bite is crucial for the structural performance of the kangaroo skull, while it is not for the wombat which process food along the entire tooth row. In accordance with previous studies, the results from this study show the mammalian skull is optimized to resist forces generated during feeding. However, other factors, including the lifestyle of the animal and its environment, also affect selection for skull morphology to meet multiple functional demands.

Morphology of the jaw-closing musculature in the common wombat (Vombatus ursinus) using digital dissection and magnetic resonance imaging.

Wombats are unique among marsupials in having one pair of upper incisors, and hypsodont molars for processing tough, abrasive vegetation. Of the three extant species, the most abundant, the common wombat (Vombatus ursinus), has had the least attention in terms of masticatory muscle morphology, and has never been thoroughly described. Using MRI and digital dissection to compliment traditional gross dissections, the major jaw adductor muscles, the masseter, temporalis and pterygoids, were described. The masseter and medial pterygoid muscles are greatly enlarged compared to other marsupials. This, in combination with the distinctive form and function of the dentition, most likely facilitates processing a tough, abrasive diet. The broad, flat skull and large masticatory muscles are well suited to generate a very high bite force. MRI scans allow more detail of the muscle morphology to be observed and the technique of digital dissections greatly enhances the knowledge obtained from gross dissections.

Three dimensional digital reconstruction of the jaw adductor musculature of the extinct marsupial giant Diprotodon optatum.

The morphology and arrangement of the jaw adductor muscles in vertebrates reflects masticatory style and feeding processes, diet and ecology. However, gross muscle anatomy is rarely preserved in fossils and is, therefore, heavily dependent on reconstructions. An undeformed skull of the extinct marsupial, Diprotodon optatum, recovered from Pleistocene sediments at Bacchus Marsh in Victoria, represents the most complete and best preserved specimen of the species offering a unique opportunity to investigate functional anatomy. Computed tomography (CT) scans and digital reconstructions make it possible to visualise internal cranial anatomy and predict location and morphology of soft tissues, including muscles. This study resulted in a 3D digital reconstruction of the jaw adductor musculature of Diprotodon, revealing that the arrangement of muscles is similar to that of kangaroos and that the muscle actions were predominantly vertical. 3D digital muscle reconstructions provide considerable advantages over 2D reconstructions for the visualisation of the spatial arrangement of the individual muscles and the measurement of muscle properties (length, force vectors and volume). Such digital models can further be used to estimate muscle loads and attachment sites for biomechanical analyses.