A three-dimensional osteochondral composite scaffold for articular cartilage repair.

There is a recognized and urgent need for improved treatment of articular cartilage defects. Tissue engineering of cartilage using a cell-scaffold approach has demonstrated potential to offer an alternative and effective method for treating articular defects. We have developed a unique, heterogeneous, osteochondral scaffold using the TheriForm three-dimensional printing process. The material composition, porosity, macroarchitecture, and mechanical properties varied throughout the scaffold structure. The upper, cartilage region was 90% porous and composed of D,L-PLGA/L-PLA, with macroscopic staggered channels to facilitate homogenous cell seeding. The lower, cloverleaf-shaped bone portion was 55% porous and consisted of a L-PLGA/TCP composite, designed to maximize bone ingrowth while maintaining critical mechanical properties. The transition region between these two sections contained a gradient of materials and porosity to prevent delamination. Chondrocytes preferentially attached to the cartilage portion of the device, and biochemical and histological analyses showed that cartilage formed during a 6-week in vitro culture period. The tensile strength of the bone region was similar in magnitude to fresh cancellous human bone, suggesting that these scaffolds have desirable mechanical properties for in vivo applications, including full joint replacement.

Particle size coarsening induced by valve silicone in a metered dose inhaler.

The objective of this study was to evaluate the effect of valve silicone on the delivered particle size distribution of a suspension metered dose inhaler (MDI). Valves were manufactured with distinct levels of silicone, which could be differentiated with Fourier transform infrared spectroscopy (FT-IR). The amount of silicone in the valve was proportional to the amount of silicone that entered the formulation and the subsequent decrease in fine particle fraction (FPF) of the active pharmaceutical ingredient (API) measured by Andersen cascade impaction. The effect of silicone content was not linear as even small amounts of silicone made a significant contribution to particle size coarsening. This coarsening was also a function of storage time and temperature. Accelerated stability conditions greatly increased coarsening kinetics as 1 month at 40 degrees C and 75% RH induced significantly more coarsening than 12 months at room temperature. Field emission scanning electron micrograph images suggest that the primary mechanism of particle size change may be aggregation as particle clusters were seen. This study indicates that silicone can be a critical process parameter for particle size distribution of a suspension MDI product. Thus, the amount of silicone in the valves needs to be minimized and controlled.

Influence of the size of micronized active pharmaceutical ingredient on the aerodynamic particle size and stability of a metered dose inhaler.

Pharmaceutical inhalers are often used to treat pulmonary diseases. Only active pharmaceutical ingredient (API) particles from these inhalers that are less than approximately 5 microm are likely to reach the lung and be efficacious. This study was designed to investigate the impact of micronized API particle size on the aerodynamic particle size distribution (PSD) profile and the particle size stability of a suspension metered dose inhaler (MDI) containing propellant HFA-227 (1,1,1,2,3,3,3 heptafluoropropane) and a corticosteroid. The median API particle size ranged from 1.1 microm to 1.8 microm (97% to 70% of particles <3 microm, respectively). This study showed that increasing the particle size of the API used to manufacture a suspension MDI product increased the aerodynamic PSD of the MDI product. Furthermore, upon storage of the MDI product under temperature cycling conditions, samples containing larger-size API particles were less stable with respect to their aerodynamic PSD than those with smaller-size API particles. It was found that size-dependent particle growth and/or aggregation of the suspended API may be occurring as a result of temperature cycling. In conclusion, this study has shown that the particle size of the raw API impacts the properties and stability of the emitted aerosol spray. Based on the findings from this study, it is recommended that the API particle size be carefully controlled in order to meet specifications set for the finished MDI product.