Quantum witness of high-speed low-noise single-photon detection.

We demonstrate high-speed and low-noise near-infrared single-photon detection by using a capacitance balancing circuit to achieve a high spike noise suppression for an InGaAs/InP avalanche photodiode. The single-photon detector could operate at a tunable gate repetition rate from 10 to 60 MHz. A peak detection efficiency of 34% has been achieved with a dark count rate of 9 × 10⁻³ per gate when the detection window was set to 1 ns. Additionally, quantum detector tomography has also been performed at 60 MHz of repetition rate and for the detection window of 1 ns, enabling to witness the quantum features of the detector with the help of a negative Wigner function. By varying the bias voltage of the detector, we further demonstrated a transition from the full-quantum to semi-classical regime.

[Frequency correction in terahertz absorption spectroscopy].

Measurement errors in frequency domain always appear when testing samples' terahertz (THz) absorption spectrum using terahertz time-domain spectroscopy (THz-TDS) system, which is supposed to be attributed to the sampling accuracy of the high speed electro-optic sampling system In order to make the measurement have a high accuracy, the method of error correction was studied in the present article. Carbon monoxide in gas phase was employed as our standard sample, and its absorption spectrum at the pressure of 2.0 x 10(5) Pa was measured experimentally. Comparing the obtained absorption frequencies with the corresponding standard data in JPL database, we got the error values, and their distribution law shows that the values have a linear correlation with the standard absorption frequency. Based on this, the error correction model was built. Using the model to correct the experimental data, the result shows the maximum error after correction is reduced to 3.36 GHz, which is two orders of magnitude lower than the error before correction. This states that the model can be used to correct the error of the THz spectrum caused by high speed electro-optic sampling system. At last, the authors draw a conclusion that the THz-TDS system is supposed to be corrected by the terahertz spectrum of carbon monoxide before measurement, in this way, the terahertz spectrum of sample can have a high accuracy. The study contributes to the material identification and the construction of molecular spectroscopy database in THz region.

A measurement system of high-temperature oxidation environment with ultrasonic Ir0.6Rth0.4 alloy thermometry.

Iridium-rhodium is generally applied as a thermocouple material, with max operating temperature about 2150 °C. In this study, a ultrasonic temperature measurement system was designed by using Iridium-rhodium (60%Ir-40%Rh) alloy as an acoustic waveguide sensor material, and the system was preliminarily tested in a high-temperature oxidation environment. The result of ultrasonic temperature measurement shows that this system can indeed work stably in high-temperature oxidation environments. The relationship between temperature and delay time of ultrasonic thermometry up to 2200 °C was illustrated. Iridium-rhodium materials were also investigated in order to fully elucidate the proposed waveguide sensor's performance in a high-temperature oxidation environment. This system lays a foundation for further application of high-temperature measurement.