A transportation network for human ovarian tissue is indispensable to success for fertility preservation.

PURPOSE: The purpose of this study was to examine the efficacy of an ovarian tissue transportation network for fertility preservation (FP) for cancer patients in Japan. METHODS: PubMed was searched for papers on transportation of human ovarian tissue for FP. We analyzed population, area, number of cancer patients for ovarian tissue cryopreservation (OTC), quality control/assessment and safety, cost of a cryopreservation center for the building for 30 years, and medical fees of cancer patients (operation, cryopreservation, and storage of ovarian tissue). RESULTS: More than twenty babies have been born in Denmark and Germany through a transportation system. Up to 400 new patients a year need OTC. The fees for removal, cryopreservation, and storage for 5 years, and transplantation of ovarian tissue are around €5,000, €4,000, and €5,000, respectively. It costs more than €5 million to establish and maintain one cryopreservation center for 30 years. If we have a few cryopreservation centers in Japan, we can cryopreserve 400 patients' ovarian tissue per year by safer slow freezing and maintain quality control/assessment. We need to lighten the patients' burden for easy to use FP by a government subsidy and medical insurance coverage. CONCLUSIONS: This model has been termed the Danish model ("the woman stays - the tissue moves"). This is truly patient-centered medicine. We can have maximum effects with the minimum burden. A transportation network like those of Denmark and Germany is the best strategy for FP in Japan. It may be the best system for cancer patients, medical staff, and the Ministry of Health, Labor, and Welfare.

The Impact of c-Fos/Activator Protein-1 Inhibition on Allogeneic Pancreatic Islet Transplantation.

Unpreventable allograft rejection is one of the main problems in pancreatic islet transplantation (PIT). Therefore, it is imperative to develop a more effective immunosuppressive strategy. The blockade of transcription factors has been a central part of T cell-depleting immunosuppressive therapies, as typified by the use of calcineurin inhibitors. The inhibition of activator protein-1 (AP-1) offers a novel strategy for immunosuppression in PIT, although to date, no reports on the effects of AP-1 inhibition are available. In this study, we investigated the immunosuppressive effects of T-5224, a c-Fos/AP-1-selective inhibitor, on murine T cells activated by αCD3+αCD28 mAbs. T-5224 inhibited proliferation, CD25 up-regulation, and the production of IL-2 and interferon-γ. In addition, T-5224 blocked the nuclear translocation of c-Fos/AP-1 in activated murine T cells. In BALB/c (H-2(d) )-to-C57BL/6J (H-2(b) ) mouse PIT, the 2-week administration of T-5224 prolonged survival of 600 islet allografts in a dose-dependent manner. When combined with a 2-week low-dose tacrolimus, the T-5224 treatment markedly prolonged allograft survival to over 300 days, while the efficacy was indeterminate when transplanted islet allograft mass was reduced to 300. We conclude that the c-Fos/AP-1 inhibition by T-5224 is a potentially attractive strategy for allogeneic PIT.

Flexural Properties and Polished Surface Characteristics of a Structural Colored Resin Composite.

OBJECTIVE: The aim of this study was to determine the flexural properties and surface characteristics of a structural colored resin composite after different finishing and polishing methods, in comparison to those of conventional resin composites. METHODS AND MATERIALS: A structural color resin composite, Omnichroma (OM, Tokuyama Corp, Chiyoda City, Tokyo, Japan), and two comparison resin composites, Filtek Supreme Ultra (FS, 3M, St Paul, MN, USA) and Tetric EvoCeram (TE, Ivoclar Vivadent, Schaan, Liechtenstein), were used. The flexural properties of the resin composites were determined in accordance with the ISO 4049 specifications. For surface properties, 70 polymerized specimens of each resin composite were prepared and divided into seven groups of 10. Surface roughness (Sa), gloss (GU), and surface free energy (SFE) were investigated after the following finishing and polishing methods. Three groups of specimens were finished with a superfine-grit diamond bur (SFD), and three with a tungsten carbide bur (TCB). After finishing, one of the two remaining groups was polished with a one-step silicone point (CMP), and the other with an aluminum oxide flexible disk (SSD). A group ground with SiC 320-grit was set as a baseline. RESULTS: The average flexural strength ranged from 116.6 to 142.3 MPa in the following order with significant differences between each value: FS > TE > OM. The average E ranged from 6.8 to 13.2 GPa in the following order with significant differences between each value: FS > TE > OM. The average R ranged from 0.77 to 1.01 MJ/mm3 in the following order: OM > FS > TE. The Sa values of the OM groups polished with CMP and SSD were found to be significantly lower than those of the other resin composites, regardless of the finishing method. The GU values appeared to be dependent on the material and the finishing method used. The OM specimens polished with SSD showed significantly higher GU values than those polished with CMP. Most of the resin composites polished with SSD demonstrated significantly higher γS values compared to the other groups. Extremely strong negative correlations between Sa and GU in the combined data from the three resin composites and each resin composite and between Sa and γS in the OM specimens were observed; GU showed a strong positive correlation with γS in the same material. CONCLUSION: These findings indicate that both flexural and surface properties are material dependent. Furthermore, the different finishing and polishing methods used in this study were observed to affect the Sa, GU, and SFE of the resin composites.

Handling and Mechanical Properties of Low-viscosity Bulk-fill Resin Composites.

This study aimed to evaluate the filler contents (FCs), flexural properties, depth of cure (DOC), wear resistance, and handling properties of different low-viscosity bulk-fill resin composites (LVBRCs) and to determine the correlations between the tested parameters. Six LVBRCs, Beautifil-Bulk (BBF), Bulk Base Hard (BBH), Bulk Base Medium (BBM), Filtek Bulk-Fill Flowable Restorative (FBF), G-ænial Bulk Injectable (GBI), and SDR flow+ Bulk-Fill Flowable (SDR) were used. The DOC and flexural property tests were conducted according to the ISO 4049 specifications. The flexural strength, elastic modulus, and resilience were determined in 12 specimens that were obtained from each of the 6 materials. Sliding-impact-wear testing was conducted by evaluating the wear facets of the specimens using a noncontact profilometer and by confocal laser scanning microscopy. The handling properties of the LVBRC was assessed via extrusion force and thread formation measurements. The DOC for the majority of the LVBRCs was approximately 4 mm. Although the FCs and mechanical properties were material dependent, some LVBRCs exhibited excellent flexural properties and wear resistance. The LVBRCs demonstrated a wide range of extrusion force and thread formation. Regarding the correlations between the tested parameters, extremely strong negative and positive correlations were observed for the DOC versus extrusion force, flexural strength versus elastic modulus, maximum depth versus volume loss, and maximum depth versus thread formation. In addition, strong correlations between FCs and DOC, resilience, wear resistance, and extrusion force were observed.

Thermoelectric properties of LaRh(1-x)Ni(x)O(3).

We report measurements and analyses of resistivity, thermopower and thermal conductivity of polycrystalline samples of perovskite LaRh(1-x)Ni(x)O(3). The thermopower is found to be large at 800 K (185 µV K(-1) for x = 0.3), which is ascribed to the high-temperature stability of the low-spin state of Rh(3+)/Rh(4+) ions. This clearly contrasts with the thermopower of the isostructural oxide LaCoO(3), which rapidly decreases above 500 K owing to the spin-state transition. The spin state of the transition-metal ions is one of the most important parameters in oxide thermoelectrics.

Influence of Different Curing Modes on Polymerization Behavior and Mechanical Properties of Dual-Cured Provisional Resins.

This study determined the influence of curing mode on polymerization behavior and mechanical properties of dual-cured provisional resins. Three dual-cured bisacryl-based provisional resins were used: Tempsmart (TS; GC Corp), Luxatemp Automix Solar (LX; DMG Chemisch Pharmazeutishe Fabrik GmbH), and Integrity Multi·Cure (IG; Dentsply Caulk). A self-cured bisacryl-based provisional resin, Protemp Plus (PP; 3M ESPE) and a conventional poly(methyl methacrylate) (PMMA) provisional resin, Unifast III (UF; GC Corp) were used as controls. The inorganic filler content and coefficients of linear thermal expansion of the test materials were measured. Six specimens of each material were used to determine the flexural strength, elastic modulus, and resilience. The changes in ultrasound velocity during polymerization were measured. The average inorganic filler contents of the provisional resins, apart from UF, ranged from 24.4 to 39.3 wt%. The highest inorganic filler content was determined for LX, whereas TS showed the lowest value among the tested materials. The average coefficients of thermal expansion of the tested provisional resins ranged from 77.3 to 107.7 (×10-6/°C). TS and IG showed significantly lower thermal expansions than the other tested provisional resins. The mean flexural strengths of the provisional resins ranged from 70.4 to 122.6 MPa, the mean elastic moduli ranged from 1.8 to 3.7 GPa, and the mean resilience of the provisional resins ranged from 1.1 to 2.3 MJ/mm3, respectively. Dual-cured provisional resins showed significantly higher flexural strengths than the PMMA resin. However, in all cases, the light-curing mode showed significantly higher flexural strengths than the self-curing mode. In the initial polymerization phase, dual-cured resins in the light-curing mode showed a rapid increase in the speed of sound (V) during light irradiation, followed by a slower increase. Conversely, the dual-cured resins in the self-curing mode showed a slower initial increase, followed by a rapid increase. Although no significant difference in V was observed between 10 and 15 minutes in the light-curing mode of all tested dual-cured resins, a significantly higher V value was obtained at 15 minutes than at 10 minutes in the self-curing modes for LX and IG. Regardless of the curing mode, tested dual-cured provisional resins showed superior mechanical properties than the conventional PMMA provisional resin. However, dual-cured provisional resin flexural properties and polymerization behavior were affected by the curing mode. This study indicated that the light-curing mode might be recommended for all dual-cured provisional resins because of the enhancement of their mechanical properties and reduction of chair time.

Polymerization Behavior and Mechanical Properties of High-Viscosity Bulk Fill and Low Shrinkage Resin Composites.

The present study determined the mechanical properties and volumetric polymerization shrinkage of different categories of resin composite. Three high viscosity bulk fill resin composites were tested: Tetric EvoCeram Bulk Fill (TB, Ivoclar Vivadent), Filtek Bulk Fill posterior restorative (FB, 3M ESPE), and Sonic Fill (SF, Kerr Corp). Two low-shrinkage resin composites, Kalore (KL, GC Corp) and Filtek LS Posterior (LS, 3M ESPE), were used. Three conventional resin composites, Herculite Ultra (HU, Kerr Corp), Estelite ∑ Quick (EQ, Tokuyama Dental), and Filtek Supreme Ultra (SU, 3M ESPE), were used as comparison materials. Following ISO Specification 4049, six specimens for each resin composite were used to determine flexural strength, elastic modulus, and resilience. Volumetric polymerization shrinkage was determined using a water-filled dilatometer. Data were evaluated using analysis of variance followed by Tukey's honestly significant difference test (α=0.05). The flexural strength of the resin composites ranged from 115.4 to 148.1 MPa, the elastic modulus ranged from 5.6 to 13.4 GPa, and the resilience ranged from 0.70 to 1.0 MJ/m3. There were significant differences in flexural properties between the materials but no clear outliers. Volumetric changes as a function of time over a duration of 180 seconds depended on the type of resin composite. However, for all the resin composites, apart from LS, volumetric shrinkage began soon after the start of light irradiation, and a rapid decrease in volume during light irradiation followed by a slower decrease was observed. The low shrinkage resin composites KL and LS showed significantly lower volumetric shrinkage than the other tested materials at the measuring point of 180 seconds. In contrast, the three bulk fill resin composites showed higher volumetric change than the other resin composites. The findings from this study provide clinicians with valuable information regarding the mechanical properties and polymerization kinetics of these categories of current resin composite.

Comparative study of survival of patients with hepatocellular carcinoma predicted by different staging systems using multivariate analysis.

AIMS: In a previous pilot study, we reported the usefulness of the modified the Cancer of the Liver Italian Program (CLIP) score for patients with hepatocellular carcinoma (HCC). To determine the best staging system for predicting the survival of HCC patients, we conducted a comparative analysis of prognosis using multivariate analysis in 210 Japanese HCC patients who underwent hepatic resection. METHODS: We compared the survival as predicted by various staging systems, including tumour node metastasis (TNM) stage of the American Joint Commission on Cancer (AJCC) and the Liver Cancer Study Group of Japan, the Japan Integrated Staging (JIS) score (Japanese TNM and Child-Pugh classification), CLIP score and our modified CLIP score using protein induced by vitamin K absence or antagonist II (PIVKA-II). RESULTS: Univariate analysis showed that discrimination of disease-free survival in the early and advanced stages by the JIS score and modified CLIP score was clearer than by the Japanese or AJCC TNM or the original CLIP score. Discrimination between stages of overall survival by all staging systems was significant. Multivariate analysis showed that the JIS, CLIP and modified CLIP scores were better staging systems for predicting survival than the Japanese and AJCC TNM. The modified CLIP score showed the lowest Akaike information criteria statistical value for disease-free and overall survival, which means the best discrimination ability for patient survival compared with the JIS score and CLIP score. CONCLUSIONS: A staging system that combines tumour factors, sensitive tumour marker(s) and hepatic function is the best predictor of prognosis of HCC patients.

Cytochemical evaluation of localization and secretion of a heterologous enzyme displayed on yeast cell surface.

A starch-utilizing Saccharomyces cerevisiae strain was constructed by cell surface engineering. Distribution of the heterologous glucoamylase-alpha-agglutinin fusion protein on the yeast cell was analyzed by indirect fluorescence microscopy using an anti-glucoamylase antibody. Most of the intense fluorescence was first localized in the small bud, then observed on the entire cell wall of the daughter and mother cells. Fluorescence also accumulated at the neck region. These observations suggest that the display of the heterologous protein on the cell surface is carried with other cell wall components to the areas in which the cell wall is newly synthesized; the distribution is controlled by the cell cycle. Then, the heterologous protein-encoding gene was expressed in a sec1 mutant, in which secretory vesicles accumulate under restrictive temperature, and the produced protein was detected by immunoelectron microscopy. Most of the gold particles that reacted with the fusion protein were not localized in vesicles but in expanding endoplasmic reticulum. This phenomenon may be due to overproduction of the heterologous protein which was designed to be displayed on the cell wall. Artificial production of heterologous protein may have caused a relative shortage of glycosyl phosphatidylinositol anchors.

Modified CLIP using PIVKA-II for evaluating prognosis after hepatectomy for hepatocellular carcinoma.

AIMS: The new staging system proposed by the Cancer of the Liver Italian Program (CLIP) for hepatocellular carcinoma (HCC) accounts for both liver dysfunction and tumour characteristics. The present study was designed to analyze UICC TNM stage, CLIP and modified CLIP in 91 patients who underwent hepatic resection for HCC. METHODS: In the modified CLIP, scoring of AFP was replaced by that of protein induced by vitamin K absence or antagonist II (PIVKA-II; predictive value, > or = 400 mAU/ml). RESULTS: After hepatic resection, 54 patients developed recurrent tumours. High PIVKA-II was a significant determinant of recurrence (p<0.05). However, a high score of the modified CLIP as well as those other staging systems did not correlate with tumour-recurrence rate. Univariate analysis showed that high TNM score, CLIP score and our modified CLIP score were significant predictors of poor prognosis. Multivariate Cox's analysis revealed that high PIVKA-II and high modified CLIP score were associated with higher risk for disease-free and overall survival as well as high TNM stage. CONCLUSIONS: Compared with the original CLIP, our modified CLIP was a better predictor of prognosis of HCC patients who underwent hepatic resection.

The Japanese integrated staging score using liver damage grade for hepatocellular carcinoma in patients after hepatectomy.

AIMS: The new Japanese staging system for hepatocellular carcinoma (HCC), the Japan integrated staging (JIS) score, accounts for both Child-Pugh classification and Japan tumour node metastasis (TNM) staging. However, in HCC patients who undergo hepatectomy, liver function is relatively good and a better prognostic classification of hepatic function is necessary. METHODS: The present study was designed to analyse the modified JIS score using liver damage grade by the Liver Cancer Study Group of Japan instead of the Child-Pugh classification (using the category indocyanine green retention rate at 15 min [ICG(R15)] instead of encephalopathy), and to compare the Japan TNM stage in 101 patients who underwent resection of HCC. RESULTS: The liver damage grade showed significantly better discrimination of disease-free and overall survival than did the Child-Pugh classification. The modified JIS score system showed significant differences of disease-free and overall survivals in each score and this system was superior for discriminating survivals compared with the TNM staging. CONCLUSIONS: The combined staging system of hepatic function, particularly ICG(R15), and tumour stage provides a better prediction of prognosis. The JIS score using the liver damage grade was a useful predictor of prognosis of HCC patients who underwent hepatic resection.

A long-term survival case of thymic squamous cell carcinoma, performed complete extirpation with vascular reconstruction of the superior vena cava.

A 59-year-old woman who complained of anterior chest pain exhibited an abnormal shadow on chest X ray and was admitted to our hospital. The chest X ray showed a demarcated tumor at the anterosuperior mediastinum and she was diagnosed as having a mediastinal tumor. After the midsternotomy was performed, the mediastinal tumor derived from the thymic tissues was discovered to have invaded the right upper lung, pericardium and superior vena cava. After excising the tumor, anastomosis between the right brachiocephalic vein and superior vena cava, followed by that between the left brachiocephalic vein and right cardiac auricle was performed using expanded polytetrafluoroethylene-ringed vascular grafts (phi 10 mm) for reconstruction. The tumor was diagnosed as a thymic carcinoma (squamous cell carcinoma) pathologically. After surgery, she was treated by cobalt irradiation. One month and again 3 months after the operation, venography showed patency. The patient has not demonstrated recurrence for 9 years and 6 months.

[Treatment with 5-FU modulated by low-dose CDDP for advanced cancers and recurrent cases of metastasis].

Advanced gastric, colon and esophageal cancers (n = 21) were treated with 5-FU (250 mg) modulated by CDDP (5 mg). The reductive ratio of tumor was 6/21 (28.6%). Six cases of partial response (PR) were limited with no surgical treatment and exploratory laparotomy of all cases, and the effectiveness rate was 54.5% (6/11). Few side effects, such as dysfunction of bone marrow and kidney, were noted. Even if side effects occurred, they were mild. We concluded that excellent treatment with 5-FU modulated by CDDP has markedly improved the efficacy.

Transport properties of the layered Rh oxide K0.49RhO2.

We report measurements and analyses of resistivity, thermopower and the Hall coefficient of single-crystalline samples of the layered Rh oxide K(0.49)RhO(2). The resistivity is proportional to the square of the temperature up to 300 K, and the thermopower is proportional to the temperature up to 140 K. The Hall coefficient increases linearly with the temperature above 100 K, which is ascribed to the triangular network of Rh in this compound. The different transport properties between Na(x)CoO(2) and K(0.49)RhO(2) are discussed on the basis of the different bandwidth between Co and Rh evaluated from the magnetotransport.

Spread of a large plasmid carrying the cpe gene and the tcp locus amongst Clostridium perfringens isolates from nosocomial outbreaks and sporadic cases of gastroenteritis in a geriatric hospital.

SUMMARYTo investigate two clusters of diarrhoea cases observed in our geriatric hospital wards, the faecal specimens were analysed. Reversed passive latex agglutination assay revealed that 63.2% and 41.7% of the faecal specimens from each cluster were positive for Clostridium perfringens enterotoxin. PCR assay revealed that 71.4% and 68.8% of C. perfringens isolates from each cluster were positive for the enterotoxin gene (cpe). These observations suggested that both the clusters were outbreaks caused by enterotoxigenic C. perfringens. Subsequent pulsed-field gel electrophoresis analysis revealed that the two outbreaks were caused by different C. perfringens isolates. However, these outbreak isolates as well as other sporadic diarrhoea isolates shared a 75-kb plasmid on which the cpe gene and the tcp locus were located. The 75-kb plasmid had horizontally spread to various C. perfringens isolates and had caused outbreaks and sporadic infections. However, the site and time of the plasmid transfer are unclear.

Postoperative changes in protein-induced vitamin K absence or antagonist II levels after hepatectomy in patients with hepatocellular carcinoma: relationship to prognosis.

BACKGROUND: alpha-Fetoprotein (AFP) has been used as a marker for hepatocellular carcinoma (HCC). However, AFP levels are often high in patients with chronic hepatitis or cirrhosis. Protein-induced vitamin K absence or antagonist II (PIVKA-II) is more sensitive for the diagnosis of HCC and prediction of patient survival. Changes in these markers after treatment may reflect treatment curability and patient outcome. METHODS: We conducted a retrospective analysis of prognosis of 63 HCC patients with high preoperative levels of AFP and PIVKA-II who underwent hepatectomy and examined the relationship between postoperative changes in both markers at 1 month and patient survival. Subjects were divided into three groups according to changes in these tumour markers after hepatectomy: normalization (N) group, decreased but still above the normal level (D) group and unchanged (U) group. RESULTS: There were no significant differences in the numbers of patients who developed tumour recurrence between changes in AFP and PIVKA-II. Survival analysis showed no significant differences in tumour-free and overall survivals between groups with respect to AFP level. The PIVKA-II-N group showed significantly better tumour-free and overall survival compared with the D and U groups (p<0.01). Multivariate analysis that included other prognostic factors identified changes in PIVKA-II level as a significant and independent prognostic factor associated with overall survival. DISCUSSION: Although changes in AFP did not correlate with patient prognosis, normalization of PIVKA-II was significantly associated with good patient survival after hepatectomy. Normalization of PIVKA-II after hepatectomy reflected the efficacy of treatment and is a suitable predictor of prognosis in HCC patients.