Tibiofemoral Relationship 3 Weeks After Anatomic Triple-Bundle Anterior Cruciate Ligament Reconstruction With 10 N of Initial Tension Is Closer to Normal Knee Versus That With 20 N of Initial Tension.

PURPOSE: This study aimed to clarify the effect of initial graft tension on the ensuing tibiofemoral relationship and on 2-year clinical outcomes after anatomic triple-bundle anterior cruciate ligament (ACL) reconstruction. METHODS: A total of 31 patients with primary unilateral ACL rupture (mean age, 25.1 years) were enrolled. Anatomic triple-bundle ACL reconstruction was performed using semitendinosus tendon autografts, and patients were grouped according to the total initial tension at graft fixation: 20 N for 16 patients between January 2012 and December 2012 and 10 N for 15 patients between January 2013 and December 2013. Three-dimensional computed tomography scans were performed preoperatively and at 3 weeks and 6 months postoperatively. The side-to-side difference of the 3-dimensional tibial position relative to the femur was compared at each time point. The side-to-side difference in anterior laxity was sequentially compared preoperatively, immediately after surgery, and at 6 months and 2 years postoperatively. Clinical outcomes at 2 years were likewise compared. RESULTS: One patient in each group was excluded because of secondary ACL injury. At 3 weeks postoperatively, 2.5 ± 1.3 and 1.0 ± 1.3 mm of posterior tibial displacement and 3.8° ± 2.4° and 2.0° ± 1.7° of external rotation were observed in the 20- and 10-N initial tension groups, respectively, with significant differences (P = .006 and .033). At 6 months postoperatively, anterior displacement was 0.1/0.1 mm and external rotation was 0.8°/0.4° in both groups, without any significant differences. The 2-year clinical outcomes were satisfactory, including mean side-to-side difference in anterior knee laxity of 0.5 mm in both groups. CONCLUSION: The tibiofemoral relationship 3 weeks after anatomic triple-bundle ACL reconstruction with 10 N of initial tension is less constrained than that with 20 N. Six-month tibiofemoral relationship and 2-year clinical outcomes are satisfactory in both groups. LEVEL OF EVIDENCE: III, retrospective comparative trial.

Posterior Ankle Impingement Caused by Hyaline-Like Cartilage Generation in Ballet Dancers-A Report of 2 Cases.

Posterior ankle impingement syndrome is mainly seen in ballet dancers and frequently associated with specific movements in ballet such as pointe and demi pointe in which the whole-body weight is applied to the maximally plantar flexed ankle. We performed arthroscopic debridement for 2 dedicated ballet dancers on the intervening soft tissue causing posterior ankle impingement syndrome (PAIS). In both cases, T2-weighted magnetic resonance imaging (MRI) revealed low-signal intensity of meniscus-like soft tissue without abnormal osseous findings, connecting from the posterior side of the talus to Kager's fat pad. To examine the intervening soft tissue in detail, we performed histological evaluation by hematoxylin and eosin staining, Safranin O fast green staining, and immunohistochemistry for type I collagen and type II collagen. Hematoxylin and eosin staining showed that there was cartilage-like tissue including chondrocyte-like cells in contact with fibrous tissue. The extracellular matrix in the cartilage zone was consistently stained by Safranin O staining and type II collagen without any staining with type I collagen. These findings suggested that the meniscus-like soft tissue appearing as low-signal intensity on MRI at the posterior side of talus included hyaline-like cartilage. To the extent of our knowledge, these were rare cases of hyaline-like cartilage generation causing PAIS in ballet dancers, which might be associated with ballet specific movements resulting in chondrogenesis.

Anatomical Triple Bundle Anterior Cruciate Ligament Reconstructions With Hamstring Tendon Autografts: Tunnel Locations and 2-Year Clinical Outcomes.

PURPOSE: To anatomically clarify the location of the tunnel apertures created using the bony landmark strategy and to elucidate clinical outcomes after anatomic triple-bundle (ATB) anterior cruciate ligament (ACL) reconstruction. METHODS: Thirty-two patients with unilateral ACL injury who had consented to undergo computed tomography (CT) at 3 weeks, as well as 2-year follow-up evaluation, were enrolled. At the time of surgery, remnant tissues were thoroughly cleared to create 2 femoral and 3 tibial tunnels inside the ACL attachment areas bordered by the bony landmarks. Two double-looped semitendinosus tendon autografts were prepared and fixed on the femur with two EndoButton-CLs and secured to the tibia with pullout sutures and plates with 10-20N of tension. The location of the tunnel aperture areas was assessed using 3-dimensional CT images, and 2-year postoperative clinical outcomes were evaluated. RESULTS: The CT evaluation showed 100% of the femoral tunnel aperture area and at least 79% of the tibial tunnel aperture area were located inside the anatomic attachment areas. Thirty patients were available for clinical evaluation. The International Knee Documentation Committee subjective assessment showed all of the patients were classified as "normal" or "nearly normal." Lachman and pivot-shift tests were negative in 100% and 93%, respectively. The mean side-to-side difference of anterior laxity at the maximum manual force with a KT-1000 Knee Arthrometer was 0.7 ± 0.7 mm, ranging from 0 to 2 mm. CONCLUSION: In ATB ACL reconstructions with hamstring tendon grafts, the tunnels can be created in proper locations using the arthroscopically-identifiable bony landmarks. Moreover, ATB ACL reconstruction with hamstring tendon grafts via the proper tunnels result in consistently satisfactory clinical outcomes. LEVEL OF EVIDENCE: Level IV, case series.

Different effects of the lateral meniscus complete radial tear on the load distribution and transmission functions depending on the tear site.

PURPOSE: To compare the effect of the lateral meniscus (LM) complete radial tear at different tear sites on the load distribution and transmission functions. METHODS: A compressive load of 300 N was applied to the intact porcine knees (n = 30) at 15°, 30°, 60°, 90°, and 120° of flexion. The LM complete radial tears were created at the middle portion (group M), the posterior portion (group P), or the posterior root (group R) (n = 10, each group), and the same loading procedure was followed. Finally, the recorded three-dimensional paths were reproduced on the LM-removed knees. The peak contact pressure (contact area) in the lateral compartment and the calculated in situ force of the LM under the principle of superposition were compared among the four groups (intact, group M, group P, and group R). RESULTS: At all the flexion angles, the peak contact pressure (contact area) was significantly higher (lower) after creating the LM complete radial tear as compared to that in the intact state (p < 0.01). At 120° of flexion, group R represented the highest peak contact pressure (lowest contact area), followed by group P and group M (p < 0.05). The results of the in situ force carried by the LM were similar to those of the tibiofemoral contact mechanics. CONCLUSION: The detrimental effect of the LM complete radial tear on the load distribution and transmission functions was greatest in the posterior root tear, followed by the posterior portion tear and the middle portion tear in the deep-flexed position. Complete radial tars of the meniscus, especially at the posterior root, should be repaired to restore the biomechanical function.

Chronological changes in cross-sectional area of the bone-patellar tendon-bone autograft after anatomic rectangular tunnel ACL reconstruction.

PURPOSE: The purpose of this study was to evaluate the change in cross-sectional area (CSA) of bone-patellar tendon-bone (BTB) autografts up to 5 years after the anatomic rectangular tunnel (ART) anterior cruciate ligament reconstruction (ACLR). The changing pattern in CSA might be a potential indicator of the graft remodeling process. METHODS: Ninety-six (62 males, 34 females, mean age 27.0 years) patients were enrolled in this study with a total of 220 MRI scans after ART BTB ACLR to evaluate the CSA of the ACL autografts. The patients with first time unilateral ACLR that consented to undergo MRI evaluations at postoperative periods were included in this study. Intraoperatively, the CSA of the graft was measured directly using a custom-made area micrometer at the midpoint of the graft. Postoperatively, using an oblique axial slice MRI that was perpendicular to the long axis of the graft, the CSA of the graft was measured with digital radiology viewing program "SYNAPSE" at the midpoint of the graft. The postoperative MRI scans were classified into seven groups according to the period from ACLR to MRI evaluation: Group 0-2 months (m.), Group 3-6 m., Group 7-12 m., Group 1-2 years (y.), Group 2-3 y., Group 3-4 y., and Group 4 y.-. The percent increase of the CSA was calculated by dividing the postoperative CSA by the intraoperative CSA. RESULTS: The postoperative CSA was significantly larger than the intraoperative CSA in each group, with the exception of Group 0-2 m. The mean percent increase of the CSA in Group 0-2 m., 3-6 m., 7-12 m., 1-2 y., 2-3 y., 3-4 y., 4 y.- was 101.8 ± 18.2, 188.9 ± 27.4, 190.9 ± 43.7, 183.3 ± 28.9, 175.2 ± 27.9, 163.9 ± 19.8, 164.5 ± 25.4% respectively. The percent increase in Group 3-6 m., 7-12 m., 1-2 y., 2-3 y., 3-4 y., and 4 y.- was significantly greater than that in Group 0-2 m. CONCLUSIONS: The CSA of the BTB autografts after the ART BTB ACLR increases rapidly by 3-6 months after ACLR, reached a maximum value of 190% at around 1 year, decreases gradually after that, and reaches a plateau at around 3 years. The current study might help clinicians to estimate an individual BTB autograft's remodeling stages when considering returning patients to sports. LEVEL OF EVIDENCE: IV.

A longitudinal tear in the medial meniscal body decreased the in situ meniscus force under an axial load.

PURPOSE: To clarify the effect of longitudinal tears of the medial meniscus on the in situ meniscus force and the tibiofemoral relationship under axial load. METHODS: Twenty-one intact porcine knees were mounted on a 6-degrees of freedom robotic system, and the force and three-dimensional path of the knee joints were recorded during three cycles under a 250-N axial load at 30°, 60°, 90° and 120° of knee flexion. They were divided into three groups of seven knees with longitudinal tears in the middle to the posterior segment of the medial meniscus based on the tear site: rim, outer one-third and inner one-third of the meniscal body. After creating tears, the same tests were performed. Finally, all paths were reproduced after total medial meniscectomy, and the in situ force of the medial meniscus was calculated based on the principle of superposition. RESULTS: With a longitudinal tear, the in situ force of the medial meniscus was significantly decreased at 60°, 90° and 120° of knee flexion, regardless of the tear site. The decrement was greater with a tear in the meniscal body than a tear in the rim. A longitudinal tear in the meniscal body caused a significantly greater tibial varus rotation than a tear in the rim at all flexion angles. CONCLUSION: Longitudinal tears significantly decreased the in situ force of the medial meniscus. Tears in the meniscal body caused a larger decrease of the in situ meniscus force and greater varus tibial rotation than tears in the rim.

Minimal tibial tunnel enlargement after anatomic rectangular tunnel anterior cruciate ligament reconstruction with bone-patellar tendon-bone graft.

BACKGROUND: The purpose of this study was to evaluate the tibial tunnel enlargement after the anatomical rectangular tunnel (ART) anterior cruciate ligament reconstruction (ACLR) with a bone-patellar tendon-bone (BTB) graft and to elucidate the correlation between the enlargement and length of the tendinous portion inside the tibial tunnel. In addition, we aimed to analyze the correlation between patient characteristics and tibial tunnel enlargement. METHODS: This study included 50 patients who underwent ART ACLR. Lateral radiographs at the time of surgery and at 2 years were compared to evaluate the tibial tunnel enlargement. Subsequently, correlations between the tunnel enlargement and (1) length of tendinous portion inside the tibial tunnel or (2) characteristics of the patients, including anterior knee laxity measured by KT-1000 arthrometer, age, sex, height, body weight, and Tegner activity level scale, were analyzed. RESULTS: The tibial tunnel was enlarged by 2.6 ± 4.2% 2 years postoperatively. The length of the tendinous portion inside the tibial tunnel was 7.8 ± 4.9 mm. There was no significant correlation between tunnel enlargement and length of tendinous portion inside the tunnel. None of the patient characteristics were detected as a risk factor for tibial tunnel enlargement. CONCLUSIONS: (1) The postoperative tibial tunnel enlargement was minimum after ART ACLR with a BTB graft. (2) There was no correlation between tibial tunnel enlargement and length of tendinous portion of BTB graft inside the tunnel. (3) None of the patient characteristics were detected as a risk factor of the tibial tunnel enlargement.

Tibial tunnel enlargement after anatomic anterior cruciate ligament reconstruction with a bone-patellar tendon-bone graft. Part 2: Factors related to the tibial tunnel enlargement.

BACKGROUND: Factors related to tunnel enlargement after anterior cruciate ligament (ACL) reconstruction should be evaluated by multivariate analysis, because the phenomenon has multifactorial characteristics. The purpose of this study was to elucidate the factors related to the tibial tunnel enlargement rate after anatomic ACL reconstruction with a bone-patellar tendon-bone (BTB) graft using multivariate analysis. METHODS: Eighteen patients with unilateral ACL rupture were included. The anatomic rectangular-tunnel (ART) ACL reconstruction with a BTB autograft was performed. 3D CT models of the tibia, the tibial tunnel, and the bone plug at 3 weeks and 1 year after surgery were reconstructed and superimposed using a surface registration technique. The cross-sectional area (CSA) of the tibial tunnel perpendicular to the tunnel axis was evaluated at the aperture. The CSA was measured at 3 weeks and 1 year after surgery, and the tunnel enlargement rate at the aperture was calculated. Multiple linear regression analysis was performed to detect the significantly related factors to the tibial tunnel enlargement rate at the aperture among potential factors consisting of preoperative demographic factors and predisposing factors with the tibial tunnel. RESULTS: The tibial tunnel enlargement rate at the aperture was 21.9 ± 14.1% (mean ± standard deviation). Multiple linear regression analysis detected the tendon length inside the tunnel as a significantly independent factor related to the tibial tunnel enlargement rate at the aperture (standardized ß = 0.726, P = 0.008). There was no significant relationship between the tibial tunnel enlargement rate at the aperture and postoperative side-to-side difference (SSD) of the anterior knee laxity or Tegner activity level scale under single linear regression analysis. CONCLUSION: The greater tendon length inside the tunnel was independently related to the higher tibial tunnel enlargement rate at the aperture 1-year after anatomic ACL reconstruction with a BTB graft under multiple linear regression analysis.

Residual graft tension after graft fixation in anterior cruciate ligament reconstruction: Manual vs tensioning boot techniques.

BACKGROUND: Graft fixation at quantitative tension using a manual tensioner was advocated in ACL reconstruction, while the measured tension that is based on the surgeon's hand with the tensioner decreases after graft fixation. Therefore, our purpose is to elucidate how effectively the pre-determined graft tension maintained after final fixation of the graft to the tibia using a tensioning boot system fixed to the calf with a bandage, while monitoring the graft tension based on tibia. METHODS: Eight cadaveric legs (mean age: 83; 3 males and 5 females) underwent an anatomic double-bundle anterior cruciate ligament (ACL) reconstruction with hamstring tendon grafts. Two tension-adjustable force gauges were installed on the lateral femoral cortex beside the femoral tunnel. Then #5 strong suture wires through the loop end of grafts were tied to the force gauges using Endo-Buttons. After manual maximum load was repeatedly applied to each graft for 3 min, the grafts were fixed to the tibia with 10 N or 20 N at 20 degree of flexion with the following tensioning techniques using double spike plate system: (1) Manually tensioning technique (MT); (2) Tensioning boot technique with flexion-extension motion (TB-FE); and (3) Tensioning boot technique with repetitive pull (TB-RP). The residual tension at 20 was measured 3 min after grafts fixation, and also after 10 and 50 times of repeated flexion-extension motion. One-way repeated measures ANOVA was used for statistical analysis among the three techniques. RESULTS: There were significant differences among three techniques fixing grafts with 10/20 N of initial tension in the residual tension 3 min after graft fixation and after 10 and 50 times of repeated flexion-extension motion. Among them, the residual tension in TB-RP was the greatest in most conditions. CONCLUSION: TB-RP is the most secure procedure to maintain the graft tension closer to the intended initial tension in ACL reconstruction.

Functional Adaptation of the Fibrocartilage and Bony Trabeculae at the Attachment Sites of the Anterior Cruciate Ligament.

The direct insertion of an enthesis is composed of uncalcified fibrocartilage (FC) and calcified FC, believed to function as buffers for multidirectional forces applied to the ligament. This study was performed to investigate the relationship between the FC thickness and bony trabecular orientation of the anterior cruciate ligament (ACL) on both the femoral and tibial sides. Six cadavers were examined (age at death: 73-92 years). Both femoral and tibial insertions of the ACL were harvested and used to make 0.5 mm interval semi-serial sections. Microdigital images were taken and used to measure the maximum thickness of both the uncalcified FC and Calcified FC. Two-dimensional discrete Fourier analysis was also performed to determine the orientation angle and orientation intensity of bony trabeculae directly under the FC. The mean thicknesses of the uncalcified FC at the femoral and tibial insertions were 0.98 mm and 0.49 mm, respectively. The mean thicknesses of the calcified FC were 0.47 mm and 0.38 mm, respectively. There was a significant difference in the uncalcified FC thickness, but not in the calcified FC thickness. The bony trabeculae showed a prominent orientation parallel to the ACL fiber on both sides, but it was more intense on the tibial side than on the femoral side. The trabecular orientation was prominent in the proximal-posterior part of the femoral side and in the anteromedial part of the tibial side, suggesting that mechanical stress is greater in these parts. The dominant bony trabecular angle was 69.0° on the femoral side and 59.8° on the tibial side when the tidemark was set at 0°. These findings suggest that the femoral side receives multidirectional stresses, while relatively unidirectional stress is loaded on the tibial side. Furthermore, stress is considered to be greater in the proximal-posterior part of the femoral insertion and in the anteromedial part of the tibial insertion. At the time of ACL reconstruction, attention should be paid to assign a robust portion of the graft to the posterior part of the femoral insertion and anteromedial part of the tibial insertion. Clin. Anat., 33:988-996, 2020. © 2019 Wiley Periodicals, Inc.

A Biomechanical Comparison of Single-, Double-, and Triple-Bundle Anterior Cruciate Ligament Reconstructions Using a Hamstring Tendon Graft.

PURPOSE: The first objective of our cadaveric study was to perform a biomechanical comparison of single-bundle (SB), double-bundle (DB), and triple-bundle (TB) anterior cruciate ligament (ACL) reconstructions using a hamstring tendon graft to determine the laxity match pre-tension (LMP) value, which is the tension within the graft required to re-create the same anterior laxity as the ACL-intact knee. The second objective was to determine the anterior laxity and force distribution during the application of both an anterior force and a simulated pivot-shift test. METHODS: Eleven fresh-frozen cadaveric knees were tested using a robotic/universal force-moment sensor system in the intact state, TB-reconstructed knee, DB-reconstructed knee, and SB-reconstructed knee. The LMP in each reconstruction was recorded. Each reconstructed knee was tested with an external load of 100-N anterior drawer and combined rotatory loads of 10-Nm valgus moment and 5-Nm internal rotation. The anterior tibial translation and tensile forces of each graft bundle were measured. RESULTS: The LMP values for the TB reconstruction were 1.7 N for the anteromedial-medial graft, 1.7 N for the anteromedial-lateral graft, and 3.4 N for the posterolateral graft (PLG). The LMP value was 5.6 N for the anteromedial graft and PLG in the DB reconstruction. The LMP value was 26.3 N for the whole graft in the SB reconstruction. No statistically significant difference in stability was found between TB and DB reconstructions during the anterior load and the combined rotatory load test. For force distribution, the PLG tension in the TB reconstruction was statistically lower than that in the DB reconstruction. CONCLUSIONS: Anatomic TB ACL reconstruction with the lowest initial tension on the graft stabilized the knee equally to DB or SB reconstruction, which required greater initial tension. CLINICAL RELEVANCE: Although SB, DB, and TB ACL reconstructions through the anatomic tunnel position could equally restore stability, the initial tension on the graft required to restore stability was less in the latter 2 multi-tunnel reconstructions.

Anatomical rectangular tunnels identified with the arthroscopic landmarks result in excellent outcomes in ACL reconstruction with a BTB graft.

PURPOSE: To elucidate tunnel locations and clinical outcomes after anatomic rectangular tunnel (ART) anterior cruciate ligament reconstruction (ACLR) using a bone-patellar tendon-bone (BTB) graft. METHODS: Sixty-one patients with a primary unilateral ACL injury were included. Tunnels were created inside the ACL attachment areas after carefully removing the ACL remnant and clearly identifying the bony landmarks. Using 3-dimensional computed tomography (3-D CT) images, the proportion of the tunnel apertures to the anatomical attachment areas was evaluated at 3 weeks. The clinical outcomes were evaluated at 2 years postoperatively. RESULTS: Geographically, the 3-D CT evaluation showed the entire femoral tunnel aperture; at least 75% of the entire tibial tunnel aperture area was consistently located inside the anatomical attachment areas surrounded by the bony landmarks. In the International Knee Documentation Committee (IKDC) subjective assessment, all patients were classified as 'normal' or 'nearly normal'. The Lachman test and pivot-shift test were negative in 98.4% and 95.1% of patients, respectively. The mean side-to-side difference of the anterior laxity at the maximum manual force with a KT- 1000 Knee Arthrometer was 0.2 ± 0.9 mm, with 95.1% of patients ranging from - 1 to + 2 mm. CONCLUSION: By identifying arthroscopic landmarks, the entire femoral tunnel aperture and at least 75% of the entire tibial tunnel aperture area were consistently located inside the anatomical attachment areas. With properly created tunnels inside the anatomical attachment areas, the ART ACLR using a BTB graft could provide satisfactory outcomes both subjectively and objectively in more than 95% of patients. LEVEL OF EVIDENCE: Case series, Level IV.

Tibial tunnel enlargement after anatomic anterior cruciate ligament reconstruction with a bone-patellar tendon-bone graft. Part 1: Morphological change in the tibial tunnel.

BACKGROUND: Three-dimensional (3D) computed tomography (CT) is reliable and accurate imaging modality for evaluating tunnel enlargement after anterior cruciate ligament (ACL) reconstruction. The purpose of this study was to evaluate the tibial tunnel enlargement including the morphological change after anatomic ACL reconstruction with a bone-patellar tendon-bone (BTB) graft using 3D CT models. METHODS: Eighteen patients with unilateral ACL rupture were included. The anatomic rectangular-tunnel (ART) ACL reconstruction with a BTB autograft was performed. 3D CT models of the tibia, the tibial tunnel, and the bone plug at 3 weeks and 1 year after surgery were reconstructed and superimposed using a surface registration technique. The cross-sectional area (CSA) of the tibial tunnel perpendicular to the tunnel axis was evaluated at the aperture and 5, 10, and 15-mm distal from the aperture. The CSA was measured at 3 weeks and 1 year after surgery and compared between the two time points. The locations of the center and the anterior, posterior, medial, and lateral edges of the tunnel footprint were also evaluated based on the coordinate system for the tibial plateau and compared between the two time points. RESULTS: At the aperture, the CSA of the tibial tunnel at 1 year after surgery was significantly larger by 21.9% than that at 3 weeks (P < 0.001). In contrast, the CSA at 1 year was significantly smaller than that at 3 weeks at 10 and 15-mm distal from the aperture (P = 0.041 and < 0.001, respectively). The center of the tunnel footprint significantly shifted postero-laterally with significant posterior shift of the anterior/posterior edges and lateral shift of the lateral edge (P < 0.001). CONCLUSION: The tibial tunnel enlarged at the aperture by 22% 1-year after anatomic ACL reconstruction with a BTB graft, and the tunnel morphology changed in a postero-lateral direction at the aperture and into conical shape inside the tunnel.

Second-look arthroscopy after anatomic anterior cruciate ligament reconstruction: Bone-patellar tendon-bone versus hamstring tendon graft.

PURPOSE: The purpose of this study was to compare the morphological and clinical outcomes between anatomic rectangular tunnel (ART) ACL reconstruction with a BTB graft and anatomic triple-bundle (ATB) ACL reconstruction with hamstring tendon (HST) grafts. METHODS: The anatomic ACL reconstructions were performed on 467 patients; 233 patients with ART technique and 234 with ATB procedure. ART procedure was predominantly indicated for athletes with higher motivation to return to sports and aggressiveness for muscle training. A total of 113 patients, with a mean age of 20.7 years, had consented to undergo second-look arthroscopy. The average time from ACL reconstruction to the second-look was 10.0 months. This study included 56 ART techniques and 57 ATB procedures. The grafts underwent meticulous probing, and were evaluated based on tension, graft damage, and synovial coverage. Moreover, the femoral tunnel aperture was also observed in detail to assess the space between the femoral tunnel and the graft. As clinical evaluation, knee effusion, range of motion, Lachman test, pivot shift test, KT side-to-side difference, and Lysholm score were assessed. RESULTS: There was no significant difference in graft tension between two procedures, while HST graft in ATB procedure had more cases with graft damage (p = 0.05). Good synovial coverage was found in 98% in ART procedure and 70% in ATB procedure, showing a significant difference (P < 0.001). At femoral tunnel aperture, there were no cases with the space around BTB graft, while 33% showed the space around HST graft, again showing a significant difference (P < 0.001). There were no significant differences in clinical outcomes. CONCLUSION: BTB graft with the ART procedure was superior to HST graft with the ATB procedure in morphology at second-look arthroscopy, while there was no significant difference in clinical outcomes between two procedures.

Sex Differences in the Residual Patellar Tendon After Harvesting Its Central Third for Anterior Cruciate Ligament Reconstruction.

OBJECTIVES: Some studies have found that sex can affect the clinical results after anterior cruciate ligament reconstruction. We hypothesized that sex would significantly affect the healing of the postoperative patellar tendon. This study evaluated the patellar tendon after bone-patellar tendon-bone autograft harvest, specifically with regard to sex-dependent differences. METHODS: At 6 months postoperatively, an ultrasonographic evaluation was performed. We measured the residual donor site gap width between tendon tissues and the thickness of newly formed nontendinous tissue in the gap. In addition, the cross-sectional area of tendon tissue was measured. The ratios between the operated and contralateral sides were calculated, and the sexes were compared. A paired Student t test was performed, with P < .05 considered statistically significant. RESULTS: The population of 52 patients (32 male and 20 female) had a mean age ± SD of 23 ± 8 years. We observed no significant sex-dependent differences in the residual donor site gap and the thickness of newly formed nontendinous tissue when calculating ratios to the contralateral tendon. The mean cross-sectional area of tendon tissue was 101 ± 26 mm2 (male, 114 ± 26 mm2 ; female, 80 ± 16 mm2 ). When the ratios to the contralateral tendon were calculated, male patients had significantly higher cross-sectional area ratios than female patients (male, 124% ± 20%; female, 100% ± 19%, P = .024). CONCLUSIONS: We have reported a dramatic increase in the cross-sectional area of patellar tendon tissue during the first 6 months after anterior cruciate ligament reconstruction with a bone-patellar tendon-bone autograft, which was more prominent in male patients than in female patients. This difference might have contributed to the sex-dependent variation in clinical outcomes.

Anterior laxity of the knee assessed with gravity stress radiograph.

OBJECTIVE: To clarify the advantage of prone position over supine position in radiographically-demonstrating anterior knee laxity measurement for anterior cruciate ligament (ACL) injury, and to optimize the radiographic technique for the ACL-deficient knees in a clinical setting. MATERIALS AND METHODS: Thirty-nine patients with unilateral ACL injury had consented to participate in this study. They were divided into two groups and subjected to the different radiographic evaluations: study 1 (20 patients); supine versus prone position with knee full-extended, and study 2 (19 patients); comparison of (1) prone position with knee full-extended (FPV), (2) prone position with knee flexed at 15° (AGV), and (3) supine position with calf put on a board at 15° of knee flexion (SGV). Lateral radiographs for both knees were taken and were measured the side-to-side difference of tibial position related to femur. RESULTS: In study 1, the side-to-side difference was 2.8 ± 1.0 mm in supine position and 4.3 ± 2.1 mm in prone position, showing a statistically significant difference. In study 2, the side-to-side difference was 3.7 ± 2.4 mm in FPV, 4.6 ± 2.0 mm in AGV, and 4.2 ± 2.8 mm in SGV, while the difference in the latter two positions was larger than that in FPV. CONCLUSIONS: The anterior laxity in prone position is larger than that in supine position for ACL injury. Moreover, the gravity-assisted lateral radiograph in prone position with knee flexed at 15° could be one of the preferable radiographic techniques and could provide more information than the simple radiograph.

Early Structural Results After Anatomic Triple Bundle Anterior Cruciate Ligament Reconstruction Validated by Tunnel Location, Graft Orientation, and Static Anteroposterior Tibia-Femur Relationship.

PURPOSE: To elucidate how closely the structural characteristics of the anterior cruciate ligament (ACL) grafts after anatomic triple bundle (ATB) reconstruction resembled those of the normal ACL. METHODS: From 2012 to 2016, patients who underwent primary ATB ACL reconstruction using hamstring tendon autografts and the same number of healthy control subjects were included. Using magnetic resonance imaging (MRI) taken at 6 months postoperatively, ACL graft orientation was evaluated by the angles against the tibial plateau measured in the sagittal and oblique coronal planes at the anteromedial and posterolateral portions (ACL-tibial plateau angle [ATA]). For factors affecting the graft orientation, the static tibiofemoral relationship was evaluated by anteroposterior tibial translocation (APTT) in the identical MRI using a previously established method, and tunnel locations were evaluated using the quadrant method. To test equivalence, the widely used two one-sided test procedure was performed, with the equivalence margins of 5° and 3 mm for ATA and APTT, respectively. RESULTS: Thirty-five patients were enrolled for each group. ATAs were not significantly different, and the 95% confidence interval (CI) of these differences was within 5° (sagittal: P = .211 [95% CI, -2.9 to 0.6]; oblique coronal ATA for the anteromedial and posterolateral portions: P = .269 [95% CI, -1.9 to 0.5] and P = .456 [95% CI,-2.1 to 0.9], respectively). The difference in APTT was neither statistically nor clinically significant (P = .114; 95% CI, -2.0 to 0.2). CONCLUSIONS: These data suggest that ACL grafts using the ATB technique achieved a graft orientation equivalent to that of the normal ACL, with an equivalent postoperative anteroposterior tibiofemoral relationship in the static MRI. Thus, the ATB ACL reconstruction technique with the presented tunnel locations produced grafts that were similar to the native ACL in orientation. LEVEL OF EVIDENCE: Level III, case-control study.

Contact area between femoral tunnel and interference screw in anatomic rectangular tunnel ACL reconstruction: a comparison of outside-in and trans-portal inside-out techniques.

PURPOSE: The purpose of this study was to compare the femoral tunnel length, the femoral graft bending angle at the femoral tunnel aperture, and the contact area between the femoral tunnel wall and an interference screw used for fixation in anatomic rectangular tunnel anterior cruciate ligament (ACL) reconstruction (ART ACLR). METHODS: The study included 149 patients with primary ACL injury who underwent ART ACLR. Preoperatively, flexion angle of the index knee was checked under general anaesthesia. Those of less than 130° of passive flexion were assigned to the outside-in (OI) technique (78 patients), while the others to the trans-portal inside-out (TP) technique (71 patients). The patients underwent computed tomography with multiplanar reconstruction at 3-5 weeks post-operatively. Femoral tunnel length, graft bending angle, and contact ratio between the IFS and femoral tunnel were assessed. P < 0.05 was considered statistically significant. RESULTS: The femoral tunnel length in the OI technique was significantly longer than that in the TP technique (P < 0.001). The femoral graft bending angle in the OI technique was significantly more acute than that in the TP technique (P < 0.001). The contact ratio in the OI technique was significantly larger than that in the TP technique at every point in the femoral tunnel (P < 0.001). CONCLUSIONS: The OI technique resulted in a more acute femoral graft bending angle, longer mean femoral tunnel length, and larger contact ratio than the TP technique after ART ACLR. LEVEL OF EVIDENCE: Retrospective comparative study, Level III.

Femoral tunnel enlargement after anatomic anterior cruciate ligament reconstruction: Bone-patellar tendon-bone /single rectangular tunnel versus hamstring tendon / double tunnels.

PURPOSE: This study aimed to prospectively compare the femoral tunnel enlargement at the aperture as well as inside the tunnel after anatomic anterior cruciate ligament (ACL) reconstruction with bone-patellar tendon-bone (BTB) graft to that with hamstring tendon (HST) graft. METHODS: This study included 24 patients with unilateral ACL rupture. Twelve patients underwent anatomic rectangular tunnel (ART) ACL reconstruction with BTB graft and the remaining 12 underwent anatomic triple-bundle (ATB) ACL reconstruction with HST graft. Three-dimensional computer models of femur and bone tunnels were reconstructed from computed tomography images obtained at 3 weeks and 1 year postoperatively. The femoral tunnel enlargement from 3 weeks to 1 year was evaluated by comparing the cross-sectional area (CSA), and compared between the two groups. RESULTS: The CSA in the ART group at 1 year decreased at the aperture as well as inside the tunnel comparing that at 3 weeks. The CSAs of both tunnels in the ATB group at 1 year significantly increased at the aperture in comparison to those at 3 weeks, and gradually decreased toward the inside of the tunnel. The enlargement rate at the aperture in the ART group was -12.9%, which was significantly smaller than that of anteromedial graft (27.9%; P = 0.006) and posterolateral graft (31.3%; P = 0.003) in the ATB group. The tunnel enlargement rate at 5 mm from the aperture in the ART group was also significantly smaller than that in the ATB group. At 10 mm from the aperture, there was no significant difference between the tunnel enlargement rate in the ART group and that of anteromedial tunnel. CONCLUSIONS: The tunnel enlargement rate around the aperture was significantly smaller after the ART procedure than that after the ATB procedure. Thus, BTB graft might be preferable as a graft material to HST graft in the femoral tunnel enlargement.

Cross-sectional area of hamstring tendon autograft after anatomic triple-bundle ACL reconstruction.

PURPOSE: The purpose was to evaluate the cross-sectional area changes in hamstring tendon autografts up to 5 years after the anatomic triple-bundle anterior cruciate ligament (ACL) reconstruction. METHODS: A total of 178 MRI scans from 139 patients (35 males, 104 females, mean age 30.4 years) with the anatomic triple-bundle ACL reconstructions were obtained to evaluate the cross-sectional area of the ACL grafts. They were classified into seven groups according to the period from reconstruction to MRI evaluation: Group -2 months (m.), Group 3-6 m., Group 7-12 m, Group 1-2 years (y.), Group 2-3 y., Group 3-4 y., and Group 4 y.-. Intra-operatively, the cross-sectional area of the graft was measured directly using a custom-made area micrometre. Post-operatively, the cross-sectional area of the grafts' mid-substance was measured with oblique axial MRI slices perpendicular to the long axis of the grafts using a digital radiology viewing program. The percent increase in the cross-sectional area was calculated by dividing the post-operative cross-sectional area by the intra-operative cross-sectional area. RESULTS: The mean percent increase in the cross-sectional area in Groups -2 m., 3-6 m., 7-12 m., 1-2 y., 2-3 y., 3-4 y., and 4 y.- was 105.7 ± 14.0, 134.9 ± 20.0, 137.3 ± 27.8, 129.4 ± 22.2, 124.1 ± 20.4, 117.8 ± 16.9, and 117.1 ± 17.2 %, respectively. The percent increase in Groups 3-6 m., 7-12 m., and 1-2 y. was significantly greater than in Group -2 m., while that in Group 4 y.- was significantly less than in Group 7-12 m. CONCLUSIONS: The cross-sectional area of the hamstring tendon autografts after the anatomic triple-bundle ACL reconstruction increases over time up to 1 year post-operatively, decreases gradually thereafter, and reaches plateau at around 3 years. LEVEL OF EVIDENCE: Retrospective case series, Level IV.