Porous Silica-Coated Gold Nanorods: A Highly Active Catalyst for the Reduction of 4-Nitrophenol.

The successful coating of thin porous silica layers of various thicknesses [(10±1), (12±1), and (14±1) nm] on cetyl trimethylammonium bromide (CTAB) capped gold nanorods was achieved through a modified Stöber procedure. The resulting material was applied as a novel catalyst for the reduction of 4-nitrophenol. The catalytic activities of the gold nanorods increased up to eight times after coating with a layer of porous silica and the reaction followed a zero-order kinetics, having a rate constant as high as 2.92×10(-1) mol L(-1) min(-1). The spectral changes during the reduction reaction of 4-nitrophenol were observed within a very short span of time and a complete conversion to 4-aminophenol occured within 5-6 mins, including the induction period of ≈2 mins. The reusability of the catalyst was studied by running the catalytic reaction during five consecutive cycles with good efficiency without destroying the nanostructure. The methodology can be effectively applied to the development of composite catalysts with highly enhanced catalytic activity.

Effects of Silica Nanostructures in Poly(ethylene oxide)-Based Composite Polymer Electrolytes.

The present work describes the synthesis of some poly(ethylene oxide)-based nanocomposite polymer electrolyte films using various silica nanostructures as the inorganic filler by simple solution mixing technique, in which the nature of the silica nanostructures play a vital role in modulating their electrochemical performances at room temperature. The silica nanostructures are prepared by ammonical hydrolysis of tetraethyl orthosilicate following the modified St6ber method. The resulting films are characterized by X-ray diffraction and differential scanning calorimeter to study their crystallinity. Room temperature AC impedance spectroscopy is utilized to determine the Li+ ion conductivity of the resulting films. The observed conductivity values of various NCPE films depend on the nature of silica filling as well as on their surface characteristics and also on the varying PEO-Li+ ratio, which is observed to be in the order of 10(-7)-10(-6) S cm(-1).

Enhancing optofluidic actuation of micro-objects by tagging with plasmonic nanoparticles.

We report experimentally and theoretically on the significant exaltation of optical forces on microparticles when they are partially coated by metallic nanodots and shined with laser light within the surface plasmon resonance. Optical forces on both pure silica particles and silica-gold raspberries are characterized using an optical chromatography setup to measure the variations of the Stokes drag versus laser beam power. Results are compared to the Mie theory prediction for both pure dielectric particles and core-shell ones with a shell described as a continuous dielectric-metal composite of dielectric constant determined from the Maxwell-Garnett approach. The observed quantitative agreement demonstrates that radiation pressure forces are directly related to the metal concentration on the microparticle surface and that metallic nanodots increase the magnitude of optical forces compared to pure dielectric particles of the same overall size, even at very low metal concentration. Behaving as "micro-sized nanoparticles", the benefit of microparticles coated with metallic nanodots is thus twofold: it significantly enhances optofluidic manipulation and motion at the microscale, and brings nanometric optical, chemical or biological capabilities to the microscale.

A highly specific gold nanoprobe for live-cell single-molecule imaging.

Single molecule tracking in live cells is the ultimate tool to study subcellular protein dynamics, but it is often limited by the probe size and photostability. Because of these issues, long-term tracking of proteins in confined and crowded environments, such as intracellular spaces, remains challenging. We have developed a novel optical probe consisting of 5 nm gold nanoparticles functionalized with a small fragment of camelid antibodies that recognize widely used green fluorescent proteins (GFPs) with a very high affinity, which we call GFP-nanobodies. These small gold nanoparticles can be detected and tracked using photothermal imaging for arbitrarily long periods of time. Surface and intracellular GFP-proteins were effectively labeled even in very crowded environments such as adhesion sites and cytoskeletal structures both in vitro and in live cell cultures. These nanobody-coated gold nanoparticles are probes with unparalleled capabilities; small size, perfect photostability, high specificity, and versatility afforded by combination with the vast existing library of GFP-tagged proteins.

Carbon Dots and Their Polymeric Nanocomposites: Insight into Their Synthesis, Photoluminescence Mechanisms, and Recent Trends in Sensing Applications.

Carbon dots (CDs), a novel class of carbon-based nanoparticles, have received a lot of interest recently due to their exceptional mechanical, chemical, and fluorescent properties, as well as their excellent photostability and biocompatibility. CDs' emission properties have already found a variety of potential applications, in which bioimaging and sensing are major highlights. It is widely acknowledged that CDs' fluorescence and surface conditions are closely linked. However, due to the structural complexity of CDs, the specific underlying process of their fluorescence is uncertain and yet to be explained. Because of their low toxicity, robust and wide optical absorption, high chemical stability, rapid transfer characteristics, and ease of modification, CDs have been recognized as promising carbon nanomaterials for a variety of sensing applications. Thus, following such outstanding properties of CDs, they have been mixed and imprinted onto different polymeric components to achieve a highly efficient nanocomposite with improved functional groups and properties. Here, in this review, various approaches and techniques for the preparation of polymer/CDs nanocomposites have been elaborated along with the individual characteristics of CDs. CDs/polymer nanocomposites recently have been highly demanded for sensor applications. The insights from this review are detailed sensor applications of polymer/CDs nanocomposites especially for detection of different chemical and biological analytes such as metal ions, small organic molecules, and several contaminants.

Effect of Au@SiO2 core shell nanoparticles on HG-induced oxidative stress triggered apoptosis in keratinocytes.

Growing evidences suggest that excess generation of highly reactive free oxygen/nitrogen radicals (ROS/RNS) are largely due to hyperglycemia causes oxidative stress. Further, excess accumulation of ROS/RNS in cellular compartments aggravates the development and progression of diabetes and its associated complications. Impaired wound healing in diabetic condition is a known vital complication all around the world. Thus, an antioxidant agent having the potential for hindering the oxidative/nitrosative stress triggered diabetic skin complication is required. The present investigation was carried out to understand the impact of silica coated gold nanoparticle (Au@SiO2 NPs) on high glucose (HG)-induced keratinocyte complications. We demonstrated that HG environment enhanced the ROS and RNS accumulations and reduced in cellular antioxidant capacities in keratinocte cells, however, Au@SiO2 NPs treatment restored the HG effect. Furthermore, excess production of ROS/RNS was associated with mitochondrial dysfunction, characterized by loss of mitochondrial membrane potential (ΔΨm), and increased in mitochondrial mass, which was restored by Au@SiO2 NPs treatment in keratinocyte cells. In addition, HG-induced excess production of ROS/RNA caused an increased in the biomolecules damage including lipid peroxidation (LPO), and protein carbonylation (PC), 8-oxoguanine DNA glycosylase-1 (OGG1) expression and increased 8-hydroxydeoxyguanosine (8-OHdG) accumulations in DNA, leading to activation of ERK1/2MAPK, AKT and tuberin pathway, inflammatory reaction, and finally apoptotic cell death. In conclusion, our findings showed that Au@SiO2 NPs treatment improved the HG-induced keratinocytes injury by suppressing the oxidative/nitrosative stress, elevating the antioxidant defence system, thereby inhibiting the inflammatory mediators and apoptosis, which may be a therapeutic cure for the diabetic keratinocyte problems.

Short gold nanorod growth revisited: the critical role of the bromide counterion.

A one-step, surfactant-assisted, seed-mediated method has been utilized for the growth of short gold nanorods with reasonable yield by modifying an established synthesis protocol. Among the various parameters that influence nanorod growth, the impact of the bromide counterion has been closely scrutinized. During this study it has been shown that, irrespective of its origin, the bromide counterion [cetyltrimethylammonium bromide (CTAB) or NaBr] plays a crucial role in the formation of nanorods in the sense that there is a critical [Br(-)]/[Au(3+)] ratio (around 200) to achieve nanorods with a maximum aspect ratio. Beyond this value, bromide can be considered as a poisoning agent unless shorter nanorods are required. The use of AgNO(3) helps in symmetry breaking for gold nanorod growth, whereas the bromide counterion controls the growth kinetics by selective adsorption on the facets of the growth direction. Thus, a proper balance between bromide ions and gold cations is also one of the necessary parameters for controlling the size of the gold nanorods; this has been discussed thoroughly. The results have been discussed based on their absorption spectra and finally shape evolution has been confirmed by TEM. Due to their efficient absorption in the near-IR region, these short nanorods were used in photothermal imaging of living COS-7 cells with improved signal-to-background ratios.

Reversible self-assembly of carboxylated peptide-functionalized gold nanoparticles driven by metal-ion coordination.

Carboxylated peptide-functionalized gold nanoparticles (peptide-GNPs) self-assemble into two- and three-dimensional nanostructures in the presence of various heavy metal ions (i.e. Pb(2+), Cd(2+), Cu(2+), and Zn(2+)) in aqueous solution. The assembly process is monitored by following the changes in the surface plasmon resonance (SPR) band of gold nanoparticles in a UV/Vis spectrophotometer, which shows the development of a new SPR band in the higher-wavelength region. The extent of assembly is dependent on the amount of metal ions present in the medium and also the time of assembly. TEM analysis clearly shows formation of two- and three-dimensional nanostructures. The assembly process is completely reversible by addition of alkaline ethylenediaminetetraacetic acid (EDTA) solution. The driving force for the assembly of peptide-GNPs is mainly metal ion/carboxylate coordination. The color and spectral changes due to this assembly can be used for detection of these heavy-metal ions in solution.

In situ synthesis of shape-selective gold nanocrystals using oligopeptide template: effect of various reaction parameters.

An oligopeptide with a free amino group at the N-terminus and a redox active tryptophan residue at the C-terminus was used to synthesize gold nanocrystals of different shapes. The concentration ratio of peptide to HAuCl4 has a significant effect on the shape of the formed nanocrystals and the polyhedral gold nanocrystals are mainly formed at higher such ratio. The effect of medium pH and reaction temperature on the shape of the formed gold nanocrystals has also been investigated. However, an oligopeptide with blocked amino group with tert-butyloxycarbonyl group resulted only spherical gold nanocrystals along with some aggregated structures. A probable mechanism for the formation of polyhedral gold nanocrystals has been described, which indicate the presence of multiple anchoring sites in the peptide molecules is mainly responsible for this type of crystal growth. The formed nanocrystals were well characterized by various experimental techniques like, UV-visible spectroscopy, transmission electron microscopy, and X-ray diffraction.

Gold nanoparticles reduce high glucose-induced oxidative-nitrosative stress regulated inflammation and apoptosis via tuberin-mTOR/NF-κB pathways in macrophages.

Hyperglycemia is a risk factor for cardiovascular mortality and morbidity, and directly responsible for exacerbating macrophage activation and atherosclerosis. We showed that gold nanoparticles (AuNPs) reduce the high glucose (HG)-induced atherosclerosis-related complications in macrophages via oxidative-nitrosative stress-regulated inflammation and apoptosis. The effects of AuNPs on oxidative-nitrosative stress markers such as cellular antioxidants were attenuated by HG exposure, leading to reduction in the accumulation of reactive oxygen/nitrogen species in cellular compartments. Further, these abnormalities of antioxidants level and reactive oxygen/nitrogen species accumulations initiate cellular stress, resulting in the activation of nuclear factor κB (NF-κB) via ERK1/2mitogen-activated protein kinase (MAPK)/Akt/tuberin-mammalian target of rapamycin (mTOR) pathways. The activated NF-κB stimulates inflammatory mediators, which subsequently subdue biomolecules damage, leading to aggravation of the inflammatory infiltration and immune responses. Treatment of AuNPs inhibits the intracellular redox-sensitive signaling pathways, inflammation, and apoptosis in macrophages. Together, our results indicate that AuNPs may modulate HG-induced oxidative-nitrosative stress. These effects may be sealed tight due to the fact that AuNPs treatment reduces the activation of NF-κB by ERK1/2MAPK/Akt/tuberin-mTOR pathways-mediated inflammatory genes expression and cellular stress responses, which may be beneficial for minimizing the atherosclerosis.

Peptide-assisted synthesis of gold nanoparticles and their self-assembly.

A novel gold nanoparticle-tripeptide (GNP-tripeptide) conjugate was prepared by peptide in-situ redox technique at ambient temperatureusing a newly designed tripeptide. This new tripeptide was nso designed that it has a C-terminus tyrosine residue, which reduced Au+3 to Au, and the terminally located free amino group was bound to the gold nanoparticle (GNP) surface resulting in highly stable Au colloids. The average diameter of the tripeptide-stabilized GNP is 8.7 +/- 2.3 nm. Tripeptide bound gold nanoparticles formed three-dimensional assemblies in the presence of an excess of similar or disimilar tripeptides. The aggregation of GNPs results in a red shift in the surface plasmon resonance from lambda max = 527 to 556 nm. The effect of the solvent, concentration, and nature of the tripeptides on the assembly process were investigated by TEM and UV-visible spectroscopy.

Single-molecule imaging in live cell using gold nanoparticles.

Optimal single particle tracking experiments in live cells requires small and photostable probes, which do not modify the behavior of the molecule of interest. Current fluorescence-based microscopy of single molecules and nanoparticles is often limited by bleaching and blinking or by the probe size. As an alternative, we present in this chapter the synthesis of a small and highly specific gold nanoprobe whose detection is based on its absorption properties. We first present a protocol to synthesize 5-nm-diameter gold nanoparticles and functionalize them with a nanobody, a single-domain antibody from camelid, targeting the widespread green fluorescent protein (GFP)-tagged proteins with a high affinity. Then we describe how to detect and track these individual gold nanoparticles in live cell using photothermal imaging microscopy. The combination of a probe with small size, perfect photostability, high specificity, and versatility through the vast existing library of GFP-proteins, with a highly sensitive detection technique enables long-term tracking of proteins with minimal hindrance in confined and crowded environments such as intracellular space.

Novel ascorbic acid based ionic liquids for the in situ synthesis of quasi-spherical and anisotropic gold nanostructures in aqueous medium.

A series of newly designed ascorbic acid based room temperature ionic liquids were successfully used to prepare quasi-spherical and anisotropic gold nanostructures in an aqueous medium at ambient temperature. The synthesis of these room temperature ionic liquids involves, first, the preparation of a 1-alkyl (such as methyl, ethyl, butyl, hexyl, octyl, and decyl) derivative of 3-methylimidazolium hydroxide followed by the neutralization of the derivatised product with ascorbic acid. These ionic liquids show significantly better thermal stability and their glass transition temperature (Tg) decreases with increasing alkyl chain length. The ascorbate counter anion of these ionic liquids acts as a reducing agent for HAuCl4 to produce metallic gold and the alkylated imidazolium counter cation acts as a capping/shape-directing agent. It has been found that the nature of the ionic liquids and the mole ratio of ionic liquid to HAuCl4 has a significant effect on the morphology of the formed gold nanostructures. If an equimolar mixture of ionic liquid and HAuCl4 is used, predominantly anisotropic gold nanostructures are formed and by varying the alkyl chain length attached to imidazolium cation of the ionic liquids, various particle morphologies can formed, such as quasispherical, raspberry-like, flakes or dendritic. A probable formation mechanism for such anisotropic gold nanostructures has been proposed, which is based on the results of some control experiments.

pH-controlled reversible assembly of peptide-functionalized gold nanoparticles.

The assembly/disassembly process of carboxylated peptide-functionalized gold nanoparticles (peptide-GNPs) was studied within the pH interval of 2.5 to 10. The assembly process was not well controlled at pH 2.5, leading to the formation of 3D structures of GNPs, whereas at pH 4 we observed controlled assembly with the formation of only a network of 1D chains. In the pH range of 2.5 to 4, the assembly proceeded with the formation of a combination of two extremes (i.e., having both 1D and 2D nanostructures). The assembly process was reversed on changing the pH of the medium to 10. The assembly/disassembly process was monitored using UV-vis spectroscopy and finally confirmed by TEM analysis. This assembly resulted from the intermolecular H-bonding between two carboxylic acid groups of peptides bound to the two adjacent GNPs and were confirmed by FTIR spectroscopy.

Tryptophan-based peptides to synthesize gold and silver nanoparticles: a mechanistic and kinetic study.

Synthetic oligopeptides with a tryptophan residue at the C-terminus have been used for the synthesis of gold and silver nanoparticles at pH 11. The tryptophan residue in the peptides is responsible for the reduction of metal ions to the respective metals, possibly through electron transfer. A mechanistic pathway has been proposed to explain the reductive properties of the tryptophan moiety of the peptide based on some spectroscopic techniques, such as UV-visible and fluorescence spectroscopy. This study reveals that some of the peptide molecules are converted to its corresponding ditryptophan, kynurenine form and some cross-linked products, all of which are highly fluorescent species. The resultant peptide-functionalized metal nanoparticles have also been characterized by UV-visible spectroscopy, transmission electron microscopy, and Fourier transform IR spectroscopy and thermogravimatric analysis.

In situ synthesis of gold and silver nanoparticles by using redox-active amphiphiles and their phase transfer to organic solvents.

An in situ reduction approach to synthesizing gold and silver nanoparticles by using a series of newly designed, redox-active amphiphiles at basic pH is described. These amphiphiles are the conjugates of a fatty acid (e.g., oleic acid, stearic acid, and lauric acid) and a redox-active amino acid (e.g., tryptophan or tyrosine). The amphiphile-coated nanoparticles are then efficiently transferred from water to different nonpolar organic media (such as benzene, toluene, xylene, cyclohexane, and hexane) simply by acid treatment. The phase-transfer process was monitored by UV/visible spectroscopy and transmission electron microscopy, and the results showed that the average particle size and size distribution remain almost unchanged after transferring to the organic media. The anchoring of the amphiphile to the nanoparticle surface was confirmed by FTIR spectroscopy and thermogravimetric analysis. A mechanism is proposed to describe the stability of colloidal Au and Ag nanoparticles formed in situ and their phase transfer to organic solvents. The presence of the amphiphile increases the thermal stability of the colloidal gold nanoparticle conjugates in organic solvents.

A mechanistic and kinetic study of the formation of metal nanoparticles by using synthetic tyrosine-based oligopeptides.

Synthetic oligopeptides containing redox-active tyrosine residues have been employed to prepare gold and silver nanoparticles. In this reduction process an electron from the tyrosinate ion of the peptide is transferred to the metal ion at basic pH through the formation of a tyrosyl radical, which is eventually converted to its dityrosine form during the reaction. This reaction mechanism was confirmed from UV-visible, fluorescence, and EPR spectroscopy and was found to be pH-dependent. Transmission electron microscopy measurement shows that the average size and the monodispersity of gold nanoparticles increase as the number of tyrosine residues in the peptide increases. The kinetic study, based on spectrophotometric measurements of the surface plasmon resonance optical property, shows that the rate of formation of gold nanoparticles was much faster at higher pH than at lower pH and was also dependent on the number of tyrosine residues present in the peptide. The dityrosine form of the peptide was found to retain reducing properties like those of tyrosine in basic medium.