Plasmonic Nanocomposites Based on Silver Nanocube-Polymer Blends Displaying Nearly Perfect Absorption in the UV Region.

Plasmonic nanocomposites based on well-dispersed silver nanocubes in poly(vinylpyrrolidone) are presented that are solution-processed into layers of varying volume fractions of nanocubes. We show that the high-energy modes of the nanocubes are almost insensitive to plasmonic coupling within the nanocube assemblies, leading to a linear increase in light absorption in the UV region with the nanocube densities. Concerning the main dipolar resonance mode at 450 nm, it is strongly affected by the formation of these assemblies, leading to an increased absorption in the UV region as well as a large absorption band in the visible region. Simulations of the optical response of the nanocube assemblies as a function of nanocube spacing and electric field polarization reveal that optical features in the visible region are due to intercube couplings at short intercube distances and parallel electric field orientation. In contrast, the additional plasmonic band in the UV region has its origin in residual dipolar oscillations of the nanocubes in combination with weak dipolar coupling for both parallel and transversal field polarizations. The combination of these effects leads to an enlarged absorption band in the UV region with nearly perfect light absorption of 98.8% at a high silver volume fraction of 8% that is accompanied by a very weak specular reflection of only 0.28%. Although such perfect absorption is usually observed only when nanocubes are assembled on a gold surface, nearly perfect absorption herein is achieved on a large palette of substrates including glass, plastic, and cheap metals such as aluminum, making it a promising approach for solution-processed robust and cheap quasi-perfect absorption coatings.

Optical modeling and optimizations of Cu2ZnSnSe4 solar cells using the modified transfer matrix method.

The fast and computationally inexpensive Modified Transfer Matrix Method (MTM) is employed to simulate the optical response of kesterite Cu2ZnSnSe4 solar cells. This method can partially take into account the scattering effects due to roughness at the interfaces between the layers of the stack. We analyzed the optical behavior of the whole cell structure by varying the thickness of the TCO layer (iZnO + ITO) between 50 and 1200 nm and the buffer CdS layer between 0 and 100 nm. We propose optimal combinations of the TCO/CdS thicknesses that can locally maximize the device photocurrent. We provide experimental data that qualitatively confirm our theoretical predictions.

Flat-top and patterned-topped cone gratings for visible and mid-infrared antireflective properties.

Achieving a broadband antireflection property from material surfaces is one of the highest priorities for those who want to improve the efficiency of solar cells or the sensitivity of photo-detectors. To lower the reflectance of a surface, we are concerned with the study of the optical response of flat-top and patterned-topped cone shaped silicon gratings, based on previous work exploring pyramid gratings. Through rigorous numerical methods such as Finite Different Time Domain, we first designed several flat-top structures that theoretically demonstrate an antireflective character within the middle infrared region. From the opto-geometrical parameters such as period, depth and shape of the pattern determined by numerical analysis, these structures have been fabricated using controlled slope plasma etching processes. In order to extend the antireflective properties up to the visible wavelengths, patterned-topped cones have been fabricated as well. Afterwards, optical characterizations of several samples were carried out. Thus, the performances of the flat-top and patterned-topped cones have been compared in the visible and mid infrared range.

Optical properties of dielectric thin films including quantum dots.

Depending on the minimum size of their micro/nanostructure, thin films can exhibit very different behaviors and optical properties. From optical waveguides down to artificial anisotropy, through diffractive optics and photonic crystals, the application changes when decreasing the minimum feature size. Rigorous electromagnetic theory can be used to model most of the components, but, when the size is a few nanometers, quantum theory also has to be used. The materials, including quantum structures, are of particular interest for many applications, in particular for solar cells because of their luminescent and electronic properties. We show that the properties of electrons in periodic and nonperiodic multiple quantum well structures can be easily modeled with a formalism similar to that used for multilayer waveguides. The effects of different parameters, in particular the coupling between wells and well thickness dispersion, on possible discrete energy levels or the energy band of electrons and on electron wave functions are given. When such quantum confinement appears, the spectral absorption and extinction coefficient dispersion with wavelength are modified. The dispersion of the real part of the refractive index can be deduced from the Kramers-Kronig relations. Associated with homogenization theory, this approach gives a new model of the refractive index for thin films including quantum dots. The bandgap of ZnO quantum dots in solution obtained from the absorption spectrum is in good agreement with our calculation.

Bringing some photonic structures for solar cells to the fore.

A review on the use of photonic structures enabling a better absorption of solar radiation within solar cells is proposed. Specific geometric configurations, such as folded solar cells or fiber-based architectures, are shown to be promising solutions to reach better light absorption. Electromagnetic optimization of thin-film solar cells and the use of angular thin-film filters, proposed by several research groups, also provide solutions to better concentrate solar radiation within the active layers of solar cells. Finally, results on "photonized" solar cells comprising gratings or more advanced photonic components, such as photonic crystals or plasmonic structures, and their effects on light-matter interaction in solar cells are highlighted.

Sand-castle biperiodic pattern for spectral and angular broadening of antireflective properties.

This Letter deals with the antireflective properties of top-patterned pyramids, looking like sand castles, bi-periodically repeated on a silicon surface. It is demonstrated numerically that such an original pattern allows a dramatic spectral and angular broadening of the antireflective efficiency. Design examples are given for wavelengths ranging from 0.5 microm to 5 microm and incidence angles of 30 degrees and 45 degrees. Applications of such antireflective surfaces on photodetectors and solar cells are soon expected.

External jugular vein cross-over as a new technique for percutaneous central venous port access in case of left central venous occlusion.

PURPOSE: To report the cross-over venous catheter technique in case of left-sided central venous (internal jugular, subclavian and innominate veins) occlusion and right-sided central vein patency. METHODS: A 60-year-old right breast cancer patient presented with a local recurrence requiring chemotherapy. He presented with a left-sided catheter-related central venous occlusion and radiodermatitis of the right chest and neck. The nonsymptomatic side of insertion was defined as the patient's left side. Successful percutaneous left-to-right external jugular vein (EJV) cross-over access tips and tricks are reported. They include performing (a) the EJV access at the lower neck, (b) the 0.032 hydrophilic guidewire (GW) catheterization of the venous curves, (c) the GW anchor technique into the inferior vena cava, (d) the GW + Glidecath catheter stiffening technique and (e) the over-the-stiff wire implantable catheter push. RESULTS: The cross-over technique was successful by using real-time ultrasonography/X-ray monitoring and interventional radiology tools (hydrophilic 0.032 in. and stiff 0.0035 in. GW and "J-shaped" Glidecath catheter) and the five-step technique. CONCLUSIONS: In case of left innominate vein occlusion and necessity of left neck venous access, percutaneous EJV access should be attempted under real-time ultrasound/X-ray monitoring when other standard (subclavian venous port and internal jugular vein) routes are no longer available.

Optical modeling of organic solar cells based on CuPc and C60.

We have investigated the influence of the poly(3,4-ethylenedioxythiophene)-blend-poly(styrene-sulfonate) (PEDOT:PSS) layer on the short-circuit current density (J(sc)) of single planar heterojunction organic solar cells based on a copper phthalocyanine (CuPc)-buckminsterfullerene (C(60)) active layer. Complete optical and electrical modeling of the cell has been performed taking into account optical interferences and exciton diffusion. Comparison of experimental and simulated external quantum efficiency has allowed us to estimate the exciton diffusion length to be 37 nm for the CuPc and 19 nm for the C(60). The dependence of short-circuit current densities versus the thickness of the PEDOT:PSS layer is analyzed and compared with experimental data. It is found that the variation in short-circuit current densities could be explained by optical interferences.