RESUMO
In tissue engineering, the composition and the structural arrangement of molecular components within the extracellular matrix (ECM) determine the physical and biochemical features of a scaffold, which consequently modulate cell behavior and function. The microenvironment of the ECM plays a fundamental role in regulating angiogenesis. Numerous strategies in tissue engineering have attempted to control the spatial cues mimicking in vivo angiogenesis by using simplified systems. The aim of this study was to develop 3D porous crosslinked hydrogels with different spatial presentation of pro-angiogenic molecules to guide endothelial cell (EC) behavior. Hydrogels with pores and preformed microchannels were made with pharmaceutical-grade pullulan and dextran and functionalized with novel pro-angiogenic protein polymers (Caf1-YIGSR and Caf1-VEGF). Hydrogel functionalization was achieved by electrostatic interactions via incorporation of diethylaminoethyl (DEAE)-dextran. Spatial-controlled coating of hydrogels was realized through a combination of freeze-drying and physical absorption with Caf1 molecules. Cells in functionalized scaffolds survived, adhered, and proliferated over seven days. When incorporated alone, Caf1-YIGSR mainly induced cell adhesion and proliferation, whereas Caf1-VEGF promoted cell migration and sprouting. Most importantly, directed cell migration required the presence of both proteins in the microchannel and in the pores, highlighting the need for an adhesive substrate provided by Caf1-YIGSR for Caf1-VEGF to be effective. This study demonstrates the ability to guide EC behavior through spatial control of pro-angiogenic cues for the study of pro-angiogenic signals in 3D and to develop pro-angiogenic implantable materials.
Assuntos
Proteínas Angiogênicas , Fator A de Crescimento do Endotélio Vascular , Fator A de Crescimento do Endotélio Vascular/metabolismo , Proteínas Angiogênicas/metabolismo , Dextranos/farmacologia , Dextranos/metabolismo , Materiais Biocompatíveis/farmacologia , Hidrogéis/química , Células Endoteliais/metabolismoRESUMO
Fistulizing anoperineal lesions are severe complications of Crohn's disease (CD) that affect quality of life with a long-term risk of anal sphincter destruction, incontinence, permanent stoma, and anal cancer. Despite several surgical procedures, they relapse in about two-thirds of patients, mandating innovative treatments. Ultrasmall particles of iron oxide (USPIO) have been described to achieve in vivo rapid healing of deep wounds in the skin and liver of rats thanks to their nanobridging capability that could be adapted to fistula treatment. Our main purpose was to highlight preclinical data with USPIO for the treatment of perianal fistulizing CD. Twenty male Sprague Dawley rats with severe 2,4,6-trinitrobenzenesulfonic acid solution (TNBS)-induced proctitis were operated to generate two perianal fistulas per rat. At day 35, two inflammatory fistulas were obtained per rat and perineal magnetic resonance imaging (MRI) was performed. After a baseline MRI, a fistula tract was randomly drawn and topically treated either with saline or with USPIO for 1 min (n = 17 for each). The rats underwent a perineal MRI on postoperative days (POD) 1, 4, and 7 and were sacrificed for pathological examination. The primary outcome was the filling or closure of the fistula tract, including the external or internal openings. USPIO treatment allowed the closure and/or filling of all the treated fistulas from its application until POD 7 in comparison with the control fistulas (23%). The treatment with USPIO was safe, permanently closed the fistula along its entire length, including internal and external orifices, and paved new avenues for the treatment of perianal fistulizing Crohn's disease.
Assuntos
Doença de Crohn , Fístula Retal , Animais , Masculino , Ratos , Doença de Crohn/complicações , Doença de Crohn/tratamento farmacológico , Doença de Crohn/patologia , Nanopartículas Magnéticas de Óxido de Ferro , Recidiva Local de Neoplasia , Qualidade de Vida , Ratos Sprague-Dawley , Fístula Retal/tratamento farmacológico , Fístula Retal/etiologia , Resultado do TratamentoRESUMO
Central nervous system (CNS) lesions are a leading cause of death and disability worldwide. Three-dimensional neural cultures in biomaterials offer more physiologically relevant models for disease studies, toxicity screenings or in vivo transplantations. Herein, we describe the development and use of pullulan/dextran polysaccharide-based scaffolds for 3D neuronal culture. We first assessed scaffolding properties upon variation of the concentration (1%, 1.5%, 3% w/w) of the cross-linking agent, sodium trimetaphosphate (STMP). The lower STMP concentration (1%) allowed us to generate scaffolds with higher porosity (59.9 ± 4.6%), faster degradation rate (5.11 ± 0.14 mg/min) and lower elastic modulus (384 ± 26 Pa) compared with 3% STMP scaffolds (47 ± 2.1%, 1.39 ± 0.03 mg/min, 916 ± 44 Pa, respectively). Using primary cultures of embryonic neurons from PGKCre, Rosa26tdTomato embryos, we observed that in 3D culture, embryonic neurons remained in aggregates within the scaffolds and did not attach, spread or differentiate. To enhance neuronal adhesion and neurite outgrowth, we then functionalized the 1% STMP scaffolds with laminin. We found that treatment of the scaffold with a 100 µg/mL solution of laminin, combined with a subsequent freeze-drying step, created a laminin mesh network that significantly enhanced embryonic neuron adhesion, neurite outgrowth and survival. Such scaffold therefore constitutes a promising neuron-compatible and biodegradable biomaterial.
Assuntos
Materiais Biocompatíveis/química , Técnicas de Cultura de Células em Três Dimensões/métodos , Embrião de Mamíferos/citologia , Neurônios/citologia , Polissacarídeos/química , Alicerces Teciduais/química , Animais , Adesão Celular , Sobrevivência Celular , Camundongos , Camundongos Endogâmicos C57BL , Camundongos Endogâmicos DBA , Porosidade , Engenharia TecidualRESUMO
Organoids production is a key tool for in vitro studies of physiopathological conditions, drug-induced toxicity assays, and for a potential use in regenerative medicine. Hence, it prompted studies on hepatic organoids and liver regeneration. Numerous attempts to produce hepatic constructs had often limited success due to a lack of viability or functionality. Moreover, most products could not be translated for clinical studies. The aim of this study was to develop functional and viable hepatic constructs using a 3D porous scaffold with an adjustable structure, devoid of any animal component, that could also be used as an in vivo implantable system. We used a combination of pharmaceutical grade pullulan and dextran with different porogen formulations to form crosslinked scaffolds with macroporosity ranging from 30 µm to several hundreds of microns. Polysaccharide scaffolds were easy to prepare and to handle, and allowed confocal observations thanks to their transparency. A simple seeding method allowed a rapid impregnation of the scaffolds with HepG2 cells and a homogeneous cell distribution within the scaffolds. Cells were viable over seven days and form spheroids of various geometries and sizes. Cells in 3D express hepatic markers albumin, HNF4α and CYP3A4, start to polarize and were sensitive to acetaminophen in a concentration-dependant manner. Therefore, this study depicts a proof of concept for organoid production in 3D scaffolds that could be prepared under GMP conditions for reliable drug-induced toxicity studies and for liver tissue engineering.
Assuntos
Dextranos/química , Glucanos/química , Fígado/citologia , Polímeros Responsivos a Estímulos/química , Engenharia Tecidual/métodos , Alicerces Teciduais/química , Citocromo P-450 CYP3A/metabolismo , Células Hep G2 , Fator 4 Nuclear de Hepatócito/metabolismo , Humanos , Organoides/crescimento & desenvolvimento , Organoides/metabolismo , PorosidadeRESUMO
A polyol method was used to obtain ultrasmall ZnO nanoparticles (NPs) doped with iron ions and coated with a low molecular weight fucoidan in order to perform in vivo MR and ex vivo fluorescence imaging of athrothrombosis. During the synthesis, the early elimination of water by azeotropic distillation with toluene allowed us to produce NPs which size, determined by XRD and TEM, decreased from 7 nm to 4 nm with the increase of iron/zinc ratios from 0.05 to 0.50 respectively. For the highest iron content (NP-0.50) NPs were evidenced as a mixture of nanocrystals made of wurtzite and cubic phase with a molar ratio of 2.57:1, although it was not possible to distinguish one from the other by TEM. NP-0.50 were superparamagnetic and exhibited a large emission spectrum at 470 nm when excited at 370 nm. After surface functionalization of NP-0.50 with fucoidan (fuco-0.50), the hydrodynamic size in the physiological medium was 162.0 ± 0.4 nm, with a corresponding negative zeta potential of -48.7 ± 0.4 mV, respectively. The coating was evidenced by FT-IR spectra and thermogravimetric analysis. Aqueous suspensions of fuco-0.50 revealed high transverse proton relaxivities (T2) with an r2 value of 173.5 mM-1 s-1 (300 K, 7.0 T) and remained stable for more than 3 months in water or in phosphate buffer saline without evolution of the hydrodynamic size and size distribution. No cytotoxic effect was observed on human endothelial cells up to 48 h with these NPs at a dose of 0.1 mg/mL. After injection into a rat model of atherothrombosis, MR imaging allowed the localization of diseased areas and the subsequent fluorescence imaging of thrombus on tissue slices.
Assuntos
Meios de Contraste/química , Compostos Férricos/química , Nanopartículas/química , Óxido de Zinco/química , Imageamento por Ressonância Magnética , Polissacarídeos/químicaRESUMO
Controlling the outer surface of nanometric metal-organic frameworks (nanoMOFs) and further understanding the in vivo effect of the coated material are crucial for the convenient biomedical applications of MOFs. However, in most studies, the surface modification protocol is often associated with significant toxicity and/or lack of selectivity. As an alternative, how the highly selective and general grafting GraftFast method leads, through a green and simple process, to the successful attachment of multifunctional biopolymers (polyethylene glycol (PEG) and hyaluronic acid) on the external surface of nanoMOFs is reported. In particular, effectively PEGylated iron trimesate MIL-100(Fe) nanoparticles (NPs) exhibit suitable grafting stability and superior chemical and colloidal stability in different biofluids, while conserving full porosity and allowing the adsorption of bioactive molecules (cosmetic and antitumor agents). Furthermore, the nature of the MOF-PEG interaction is deeply investigated using high-resolution soft X-ray spectroscopy. Finally, a cell penetration study using the radio-labeled antitumor agent gemcitabine monophosphate (3 H-GMP)-loaded MIL-100(Fe)@PEG NPs shows reduced macrophage phagocytosis, confirming a significant in vitro PEG furtiveness.
RESUMO
Sequence-defined oligourethanes were tested as inâ vivo taggants for implant identification. The oligomers were prepared in an orthogonal solid-phase iterative approach and thus contained a coded monomer sequence that can be unequivocally identified by tandem mass spectrometry (MS/MS). The oligomers were then included in small amounts (1â wt %) in square-centimeter-sized crosslinked poly(vinyl alcohol) (PVA) model films, which were intramuscularly and subcutaneously implanted in the abdomen of rats. After one week, one month, or three months of implantation, the PVA films were explanted. The rat tissues exposed to the implants did not exhibit any adverse reactions, which suggested that the taggants are not harmful and probably not leaching out from the films. Furthermore, the explanted films were immersed in methanol, as a solvent for oligourethanes, and the liquid extract was analyzed by mass spectrometry. In all cases, the oligourethane taggant was detected, and its sequence was identified by MS/MS.
Assuntos
Poliuretanos/química , Álcool de Polivinil/química , Próteses e Implantes , Abdome/patologia , Animais , Linhagem Celular , Sobrevivência Celular/efeitos dos fármacos , Humanos , Metanol/química , Camundongos , Poliuretanos/toxicidade , Álcool de Polivinil/análise , Ratos , Espectrometria de Massas por Ionização por ElectrosprayRESUMO
Despite high morbidity and mortality associated with lung diseases, addressing drugs towards lung tissue remains a pending task. Particle lung filtration has been proposed for passive lung targeting and drug delivery. However, toxicity issues derived from the long-term presence of the particles must be overcome. By exploiting some of the ignored properties of nanosized metal-organic frameworks it is possible to achieve impressive antitumoral effects on experimental lung tumors, even without the need to engineer the surface of the material. In fact, it was discovered that, based on unique pH-responsiveness and reversible aggregation behaviors, nanoMOF was capable of targeting lung tissue. At the neutral pH of the blood, the nanoMOFs form aggregates with the adequate size to be retained in lung capillaries. Within 24â h they then disaggregate and release their drug payload. This phenomenon was compatible with lung tissue physiology.
Assuntos
Antineoplásicos/farmacologia , Neoplasias Pulmonares/tratamento farmacológico , Estruturas Metalorgânicas/farmacologia , Nanoestruturas/química , Antineoplásicos/química , Proliferação de Células/efeitos dos fármacos , Sistemas de Liberação de Medicamentos , Ensaios de Seleção de Medicamentos Antitumorais , Humanos , Neoplasias Pulmonares/patologia , Estruturas Metalorgânicas/química , Tamanho da Partícula , Propriedades de SuperfícieRESUMO
As the conversion rate of preclinical studies for cancer treatment is low, user-friendly models that mimic the pathological microenvironment and drug intake with high throughput are scarce. Animal models are key, but an alternative to reduce their use would be valuable. Vascularized tumor-on-chip models combine great versatility with scalable throughput and are easy to use. Several strategies to integrate both tumor and vascular compartments have been developed, but few have been used to assess drug delivery. Permeability, intra/extravasation, and free drug circulation are often evaluated, but imperfectly recapitulate the processes at stake. Indeed, tumor targeting and chemoresistance bypass must be investigated to design promising cancer therapeutics. In vitro models that would help the development of drug delivery systems (DDS) are thus needed. They would allow selecting good candidates before animal studies based on rational criteria such as drug accumulation, diffusion in the tumor, and potency, as well as absence of side damage. In this review, we focus on vascularized tumor models. First, we detail their fabrication, and especially the materials, cell types, and coculture used. Then, the different strategies of vascularization are described along with their classical applications in intra/extravasation or free drug assessment. Finally, current trends in DDS for cancer are discussed with an overview of the current efforts in the domain.
Assuntos
Sistemas de Liberação de Medicamentos , Neoplasias , Humanos , Animais , Neoplasias/tratamento farmacológico , Antineoplásicos/administração & dosagem , Antineoplásicos/farmacocinética , Neovascularização Patológica/tratamento farmacológico , Microambiente Tumoral/efeitos dos fármacosRESUMO
Cardiovascular diseases (CVDs) stand as the leading cause of death worldwide, posing a significant global health challenge. Consequently, the development of innovative therapeutic strategies to enhance CVDs treatment is imperative. RNA-based therapies, encompassing non-coding RNAs, mRNA, aptamers, and CRISPR/Cas9 technology, have emerged as promising tools for addressing CVDs. However, inherent challenges associated with RNA, such as poor cellular uptake, susceptibility to RNase degradation, and capture by the reticuloendothelial system, underscore the necessity of combining these therapies with effective drug delivery systems. Various non-viral delivery systems, including extracellular vesicles, lipid-based carriers, polymeric and inorganic nanoparticles, as well as hydrogels, have shown promise in enhancing the efficacy of RNA therapeutics. In this review, we offer an overview of the most relevant RNA-based therapeutic strategies explored for addressing CVDs and emphasize the pivotal role of delivery systems in augmenting their effectiveness. Additionally, we discuss the current status of these therapies and the challenges that hinder their clinical translation.
Assuntos
Doenças Cardiovasculares , Nanopartículas , Humanos , RNA , Doenças Cardiovasculares/tratamento farmacológico , Sistemas de Liberação de Medicamentos , RNA Mensageiro/genéticaRESUMO
Liver tissue engineering approaches aim to support drug testing, assistance devices, or transplantation. However, their suitability for clinical application remains unsatisfactory. Herein, we demonstrate the beneficial and biocompatible use of porous pullulan-dextran hydrogel for the self-assembly of hepatocytes and biliary-like cells into functional 3D microtissues. Using HepaRG cells, we obtained 21 days maintenance of engineered liver polarity, functional detoxification and excretion systems, as well as glycogen storage in hydrogel. Implantation on two liver lobes in mice of hydrogels containing 3800 HepaRG 3D structures of 100 âµm in diameter, indicated successful engraftment and no signs of liver toxicity after one month. Finally, after acetaminophen-induced liver failure, when mice were transplanted with engineered livers on left lobe and peritoneal cavity, the survival rate at 7 days significantly increased by 31.8% compared with mice without cell therapy. These findings support the clinical potential of pullulan-dextran hydrogel for liver failure management.
RESUMO
Three-dimensional stroma engineered models would enable fundamental and applicative studies of human tissues interaction and remodeling in both physiological and pathological conditions. In this work, we propose a 3D vascularized stroma model to be used as in vitro platform for drug testing. A pullulan/dextran-based porous scaffold containing pre-patterned microchannels of 100 µm diameter is used for co-culturing of fibroblasts within the matrix pores and endothelial cells to form the lumen. Optical clearing of the constructs by hyperhydration allows for in-depth imaging of the model up to 1 mm by lightsheet and confocal microscopy. Our 3D vascularized stroma model allows for higher viability, metabolism and cytokines expression compared to a monocultured vascular model. Stroma-endothelium cross-talk is then investigated by exposing the system to pro and anti-angiogenic molecules. The results highlight the protective role played by fibroblasts on the vasculature, as demonstrated by decreased cytotoxicity, restoration of nitric oxide levels upon challenge, and sustained expression of endothelial markers CD31, vWF and VEGF. Our tissue model provides a 3D engineered platform for in vitro studies of stroma remodeling in angiogenesis-driven events, known to be a leading mechanism in diseased conditions, such as metastatic cancers, retinopathies and ischemia, and to investigate related potential therapies.
Assuntos
Sinais (Psicologia) , Células Endoteliais , Humanos , Fibroblastos , Neovascularização Fisiológica , EndotélioRESUMO
Vascularization of 3D models represents a major challenge of tissue engineering and a key prerequisite for their clinical and industrial application. The use of prevascularized models built from dedicated materials could solve some of the actual limitations, such as suboptimal integration of the bioconstructs within the host tissue, and would provide more in vivo-like perfusable tissue and organ-specific platforms. In the last decade, the fabrication of vascularized physiologically relevant 3D constructs has been attempted by numerous tissue engineering strategies, which are classified here in microfluidic technology, 3D coculture models, namely, spheroids and organoids, and biofabrication. In this review, the recent advancements in prevascularization techniques and the increasing use of natural and synthetic materials to build physiological organ-specific models are discussed. Current drawbacks of each technology, future perspectives, and translation of vascularized tissue constructs toward clinics, pharmaceutical field, and industry are also presented. By combining complementary strategies, these models are envisioned to be successfully used for regenerative medicine and drug development in a near future.
Assuntos
Bioimpressão/métodos , Modelos Biológicos , Neovascularização Fisiológica/fisiologia , Impressão Tridimensional , Engenharia Tecidual/métodos , Técnicas In VitroRESUMO
Within the biomaterials proposed for tissue regeneration, synthetic 3D hydrogels that mimic soft tissues possess great potential for regenerative medicine but their poor vascularization rate is usually incompatible with long-term cell survival. Fabrication of biomaterials that promote and/or accelerate vascularization remains nowadays a challenge. In the present work, hydrogels with tubular geometries ranging from 28 to 680 µm in diameter, that correspond to those of human small artery/veins and arterioles and venules, were prepared. The surface of this tubes was coated with proteins of the extracellular matrix assuring the adhesion of endothelial cells in a monolayer. Interestingly, in the case of small diameter channels, polysaccharide-based hydrogels made of neutral pullulan and dextran that do not allow endothelial cell adhesion, were transformed into active materials guiding endothelial cell behavior solely by modification of the internal microarchitecture, without addition of proteins. Under static conditions, endothelial cell adhesion, migration, proliferation and polarization on the hydrogel was induced, without the addition of any extracellular matrix protein or adhesion peptide; this property was found to be directly dependent on the curvature of the internal channels. In the last years, the impact of the geometry of biomaterials to regulate cell behavior has been highlighted paving the way to use non-flat geometries as cues to develop biomaterials to guide tissue regeneration. Here, we report a functional material based on geometrical cues to assure endothelial cell arrangement in tubular vessel-like structures and providing with new pro-vascularizing properties.
Assuntos
Células Endoteliais , Hidrogéis , Materiais Biocompatíveis/farmacologia , Humanos , Polissacarídeos , Engenharia TecidualRESUMO
Bone resorption can negatively influence the osseointegration of dental implants. Barrier membranes for guided bone regeneration (GBR) are used to exclude nonosteogenic tissues from influencing the bone healing process. In addition to the existing barrier membranes available on the market, a growing variety of membranes for GBR with tailorable physicochemical properties are under preclinical evaluation. Hence, the aim of this review is to provide a comprehensive description of materials used for GBR and to report the main industrial and regulatory aspects allowing the commercialization of these medical devices (MDs). In particular, a summary of the main attributes defining a GBR membrane is reported along with a description of commercially available and under development membranes. Finally, strategies for the scaling-up of the manufacturing process and the regulatory framework of the main MD producers (USA, EU, Japan, China, and India) are presented. The description of the regulatory approval process of GBR membranes is representative of the typical path that medium- to high-risk MDs have to follow for an effective medical translation, which is of fundamental importance to increase the impact of biomedical research on public health.
Assuntos
Implantes Dentários , Regeneração Tecidual Guiada Periodontal , Implantes Absorvíveis , Regeneração Óssea , China , Membranas ArtificiaisRESUMO
Although nanoscaled metal-organic frameworks (nanoMOFs) are promising drug carriers, their appropriate formulation remains almost unexplored and basically restricted to intravenous routes. Lungs, beneficiating from a large absorption surface and low enzymatic presence, are a very attractive target for both local and systemic delivery. However, pulmonary nanoMOF formulation is a pending and defying task. Thus, we propose a pioneer nanoMOF-based microsphere system as a potential platform for pulmonary administration. A biocompatible nanoMOF was successfully encapsulated in mannitol by a simple and continuous spray-drying technique. Upon intratracheal administration to rats, the resulting formulation, exhibiting optimal properties (i.e., homogeneity, size, density, and spray-drying process yield), was able to release the intact nanoMOF carrier uniformly along the lungs, reaching the bronchioles and alveoli.
Assuntos
Sistemas de Liberação de Medicamentos/métodos , Excipientes/química , Estruturas Metalorgânicas/química , Microesferas , Administração por Inalação , Animais , Dextranos/química , Manitol/química , Estruturas Metalorgânicas/administração & dosagem , Estudo de Prova de Conceito , Ratos Wistar , alfa-Ciclodextrinas/químicaRESUMO
In the past few years, numerous studies have demonstrated the great potential of nano particles of metal-organic frameworks (nanoMOFs) at the preclinical level for biomedical applications. Many of them were reported very recently based on their bioactive composition, anticancer application, or from a general drug delivery/theranostic perspective. In this review, the authors aim at providing a global view of the studies that evaluated MOFs' biomedical applications at the preclinical stage, when in vivo tests are described either for pharmacological applications or for toxicity evaluation. The authors first describe the current surface engineering approaches that are crucial to understand the in vivo behavior of the nanoMOFs. Finally, after a detailed and comprehensive analysis of the in vivo studies reported with MOFs so far, and considering the general evolution of the drug delivery science, the authors suggest new directions for future research in the use of nanoMOFs for biomedical applications.
Assuntos
Nanopartículas , Portadores de Fármacos , Sistemas de Liberação de Medicamentos , Estruturas MetalorgânicasRESUMO
Despite the introduction of new drugs and innovative devices contributing in the last years to improve patients' quality of life, morbidity and mortality from cardiovascular diseases remain high. There is an urgent need for addressing the underlying problem of the loss of cardiac or vascular tissues and therefore developing new therapies. Autologous vascular transplants are often limited by poor quality of donor sites and heart organ transplantation by donor shortage. Vascular and cardiac tissue engineering, whose aim is to repair or replace cardiovascular tissues by the use of cells, engineering and materials, as well as biochemical and physicochemical factors, appears in this scenario as a promising tool to repair the damaged hearts and vessels. We will present a general overview on the fundamentals in the area of cardiac and vascular tissue engineering as well as on the latest progresses and challenges.
Assuntos
Bioprótese , Procedimentos Cirúrgicos Cardíacos/instrumentação , Doenças Cardiovasculares/cirurgia , Miócitos Cardíacos/transplante , Medicina Regenerativa , Transplante de Células-Tronco/métodos , Engenharia Tecidual , Alicerces Teciduais , Animais , Procedimentos Cirúrgicos Cardíacos/métodos , Doenças Cardiovasculares/patologia , Doenças Cardiovasculares/fisiopatologia , Humanos , Miocárdio/patologia , Miócitos Cardíacos/patologia , Desenho de Prótese , Recuperação de Função Fisiológica , Regeneração , Medicina Regenerativa/instrumentação , Medicina Regenerativa/métodos , Engenharia Tecidual/instrumentação , Engenharia Tecidual/métodosRESUMO
Neuregulin (NRG1) and fibroblast growth factor (FGF1) are well known growth factors implicated in cardiomyocyte proliferation and survival, as well as in angiogenesis, the development of adult heart and the maintenance of cardiac function. NRG1 and FGF1 have become promising therapeutic agents to treat myocardial infarction (MI) disorder. Unfortunately, clinical trials performed so far reported negative efficacy results, because growth factors are rapidly degraded and eliminated from the biological tissues once administered. In order to increase their bioavailability and favour their therapeutic effects, they have been combined with poly(lactic-co-glycolic acid) and polyethylene glycol microparticles (PLGA MPs and PEG-PLGA MPs). Here we compare both types of microparticles loaded with NRG1 or FGF1 in terms of efficacy in a rat MI model. Our results showed that intramyocardial injection of NRG1 or FGF1-loaded PLGA and PEG-PLGA MPs brought about similar improvements in the ejection fraction, angiogenesis and arteriogenesis after administration into the infarcted hearts. PEG coating did not add any effect regarding MP efficacy. Both PLGA and PEG-PLGA MPs were equally phagocyted in the heart. To our knowledge, this is the first study analysing the opsonisation process in heart tissue. The results allow us to conclude that the opsonisation process is different in heart tissue compared to blood.
Assuntos
Fator 1 de Crescimento de Fibroblastos/administração & dosagem , Ácido Láctico/química , Infarto do Miocárdio/terapia , Miocárdio/patologia , Neuregulina-1/administração & dosagem , Poliésteres/química , Polietilenoglicóis/química , Ácido Poliglicólico/química , Animais , Citocinas , Coração/fisiopatologia , Copolímero de Ácido Poliláctico e Ácido Poliglicólico , Ratos , Ratos Sprague-Dawley , RegeneraçãoRESUMO
Tissue engineering is a promising strategy to promote heart regeneration after a myocardial infarction (MI). In this study, we investigated the reparative potential of a system that combines adipose-derived stem cells (ADSCs) with microparticles (MPs) loaded with neuregulin (NRG), named ADSC-NRG-MPs, on a rat MI model. First, cells were attached to the surface of MPs encapsulating NRG and coated with a 1:1 mixture of collagen and poly-d-lysine. One week after in vivo administration, the system favored the shift of macrophage expression from a pro-inflammatory to a regenerative phenotype. At long-term, the adhesion of ADSCs to MPs resulted in an increased cell engraftment, with cells being detectable in the tissue up to three months. In consonance, better tissue repair was observed in the animals treated with cells attached to MPs, which presented thicker left ventricles than the animals treated with ADSCs alone. Moreover, the presence of NRG in the system promoted a more complete regeneration, reducing the infarct size and stimulating cardiomyocyte proliferation. Regarding vasculogenesis, the presence of ADSCs and NRG-MPs alone stimulated vessel formation when compared to the control group, but the combination of both induced the largest vasculogenic effect, promoting the formation of both arterioles and capillaries. Importantly, only when ADSCs were administered adhered to MPs, they were incorporated into newly formed vessels. Collectively, these findings demonstrate that the combination of ADSCs, MPs and NRG favored a synergy for inducing a greater and more complete improvement in heart regeneration and provided strong evidence to move forward with preclinical studies with this strategy.