RESUMO
BACKGROUND The aim of this study was to assess the influence of maxillofacial prosthodontic rehabilitation on anxiety/depression severity in patients with rhino-orbital cerebral mucormycosis (ROCM) after maxillectomy. MATERIAL AND METHODS Sixty post-mucormycotic patients treated with maxillectomy (33 males, 27 females) were divided into 5 groups based on maxillectomy types (unilateral/bilateral, subtotal/total) and treatment given (psychotherapy/obturator/implant/orbital/ocular prosthesis). Anxiety and depression symptoms were assessed using appearance anxiety inventory (AAI) and patient health questionnaire (PHQ9). Data were collected at 4 time intervals [T0 (before prosthesis), T1 (2 weeks after prosthesis), T2 (6 months) and T3 (1 year). Frequency distribution and mean values were determined for individual group/subgroups/total cohort. Differences between groups were determined using one-way ANOVA (single-factor/Friedman's) followed by post hoc correction (Bonferroni) and t test for unequal variance with probability P value being statistically significant at <0.05. RESULTS The mean scores for appearance anxiety were 29.13±4.72 (diagnostic for existing body dysmorphic disorder) at T0, which decreased to 16.88±3.02 at T3 for the total cohort. The differences for the gender-based cohort, its various groups, and respective subgroups were significant (P<0.05) at various time intervals. The mean scores in the total cohort for depression symptom severity were 16.81±4.89 (moderately severe) at T0, which increased to 18.5±4.94 at T1, followed by reduction at T2 (12.0±4.43; moderate) and T3 (7.38±3.37; mild). Gender differences for both variables were found to be statistically significant (P<0.05). CONCLUSIONS Comprehensive rehabilitation that included a diagnosis of psychological symptoms followed by psychotherapeutic/pharmacotherapeutic/prosthodontic intervention reduced the anxiety/depression symptom levels to normal at 1 year.
Assuntos
COVID-19 , Mucormicose , Masculino , Feminino , Humanos , Depressão/psicologia , Prostodontia , Ansiedade/psicologiaRESUMO
BACKGROUND The ratio between a tooth root and its crown is an essential diagnostic parameter that determines treatment options. This radiographic study used panoramic dental radiographs or orthopantograms to measure the mean root (R)-to-crown (C) ratios (R/C) of the permanent teeth in 81 Saudi adults. MATERIAL AND METHODS A total of 81 panoramic radiographs of Saudi adult patients (40 males and 41 females) previously treated in the College of Dentistry, Saudi Arabia, aged 16-35 years, were selected. The crown height and root length for each tooth were measured on the digital panoramic radiographs. The correlation coefficient (intra-class) was calculated to assess the intra-examiner reproducibility and a good agreement was achieved (ICC=0.79-0.89). RESULTS For both males and females, the highest mean R/C ratio was for maxillary canine (1.91) and for mandibular second premolar (2.0) while the lowest R/C ratio was for maxillary first molar (1.64) and for mandibular central incisor (1.59). Except for the maxillary second premolar, no significant differences in R/C ratios were observed for maxillary arch. In the mandibular arch, the R/C ratio for lateral incisor, both premolars, and molars differed significantly (P<0.05). Among males, statistically significant differences between teeth existed in R/C ratios for central and lateral incisors, second premolar, and both molars (P>0.05). For females, significant differences between teeth in R/C ratios were observed for both premolars and both molars (P>0.05). CONCLUSIONS This study supports the findings from previous studies that orthopantograms can be used to calculate root/crown ratios, which varies between males and females and the dental arch among Saudi adults.
Assuntos
Dentição Permanente , Radiografia Panorâmica/métodos , Coroa do Dente/diagnóstico por imagem , Adolescente , Adulto , Feminino , Seguimentos , Humanos , Masculino , Reprodutibilidade dos Testes , Estudos Retrospectivos , Arábia Saudita , Adulto JovemRESUMO
BACKGROUND: Dental education is considered as a complex, challenging and often stressful educational procedure. Acquisition of psychomotor skills by undergraduate students is an important step in many health professions to become a successful professional. During under graduation, class II cavity preparation exercise is of utmost important in dentistry. OBJECTIVE: To compare class II cavities prepared by students after hands-on live demonstration and pre-recorded video demonstration using well-organised evaluation rubrics. METHOD: Preclinical dental students (n= 50) were divided into two groups. The students in group I (n= 25) attended a hands-on live demonstration performed by one faculty while students in group II (n= 25) watched a 15-minute pre-recorded procedural video on the projector. Both groups were appealed to prepare class II cavity for amalgam involving disto-occlusal surface of mandibular second molar articulated on jaw model (TRU LON study model, Jayna industries, Ghaziabad U.P., India). Following completion of the preparations, all teeth were collected, and labelled grades of prepared cavities were given according to prespecified rubrics. The data of scores were presented as means and standard deviation. Statistical analysis of data was executed using SPSS software. A paired t-test was used to compare scores between groups. RESULTS: The study shows that the video-supported demonstration of a cavity preparation was better than the live hands-on demonstration. A higher mean response for the procedural video group was found compared to the live demonstration group (p= 0.000133). CONCLUSION: Pre-recorded video-supported demonstration along with guidance by a tutor may be a viable alternative to hands-on live demonstration in cavity preparation procedures during undergraduate dental training. Moreover, rubric methods can be implemented in the teaching of various preclinical exercises for conservative dentistry and endodontics.
RESUMO
Background: Minimally invasive dentistry (MID) includes caries detection using caries risk assessment (CRA), early localization of nascent carious sores including necessary and voluntary avoidance, and remineralization of demineralized veneer and dentin when diagnosed early for these reasons. Although the dentistry curriculum prioritizes the benefits of MID in tooth protection, this research is seldom included in classroom instruction. Aim: The purpose of this research was to gauge the level of understanding that dental professionals have about MID ideas. Methods: An online questionnaire measuring MID knowledge and application was used to compile the data. The Chi-square tests were run for statistical analysis in the Statistical Package for the Social Sciences (SPSS). Results: Just 42.2% of the dentists who replied had MID training during their undergraduate or internship years, and the majority of that training came via lectures (45.2%). The majority (almost 81%) of respondents believed that CRA should be performed on all patients. Differences in knowledge and experience with atraumatic restorative therapy and the sandwich approach for treating caries in permanent teeth and high caries risk children were shown to be statistically significant (P 0.05). Conclusion: Dentists know about the benefits of MID, but their patients are not reaping those benefits since so many dentists still use the old methods of treating complete caries.
RESUMO
Reusing of alloy has become a need of time due to the increasing demand, depletion of resources, and substantial increase in their price. The alloys used require a long-term stay in the oral cavity exposed to a wet environment, so they must have good wear resistance, biocompatibility, and mechanically good strength. In this study, the vertical marginal discrepancy, surface roughness, and microhardness of the new and recast nickel-chromium (base metal) alloys were evaluated. 125 wax patterns were fabricated from a customized stainless steel master die with a heavy chamfer cervical margin divided into 5 groups. Each group had 25 samples. Group A: 25 wax patterns were cast using 100% by weight of new alloy, Group B: the casting was done by using 75% new alloy and 25% alloy by weight, Group C: wax patterns were cast using 50% new alloy and 50% alloy, Group D: 25% new alloy and 75% alloy and Group E: 100% recast alloy. The vertical marginal discrepancy was measured by an analytical scanning microscope, microhardness was tested on a universal testing machine, and surface roughness was on a tester of surface roughness. Castings produced using new alloys were better than those obtained with reused alloys. Alloys can be reused till 50% by weight along with the new alloy and accelerated casting technique can be used to save the lab time to fabricate castings with acceptable vertical marginal discrepancy, microhardness, and surface roughness. This indicated that 50% recasting of (Ni-Cr) can be used as a good alternative for the new alloy from an economical point of view.
RESUMO
Maintaining a microbe-free environment in healthcare facilities has become increasingly crucial for minimizing virus transmission, especially in the wake of recent epidemics like COVID-19. To meet the urgent need for ongoing sterilization, autonomous ultraviolet disinfection (UV-D) robots have emerged as vital tools. These robots are gaining popularity due to their automated nature, cost advantages, and ability to instantly disinfect rooms and workspaces without relying on human labor. Integrating disinfection robots into medical facilities reduces infection risk, lowers conventional cleaning costs, and instills greater confidence in patient safety. However, UV-D robots should complement rather than replace routine manual cleaning. To optimize the functionality of UV-D robots in medical settings, additional hospital and device design modifications are necessary to address visibility challenges. Achieving seamless integration requires more technical advancements and clinical investigations across various institutions. This mini-review presents an overview of advanced applications that demand disinfection, highlighting their limitations and challenges. Despite their potential, little comprehensive research has been conducted on the sterilizing impact of disinfection robots in the dental industry. By serving as a starting point for future research, this review aims to bridge the gaps in knowledge and identify unresolved issues. Our objective is to provide an extensive guide to UV-D robots, encompassing design requirements, technological breakthroughs, and in-depth use in healthcare and dentistry facilities. Understanding the capabilities and limitations of UV-D robots will aid in harnessing their potential to revolutionize infection control practices in the medical and dental fields.
RESUMO
Background: Patients health education by healthcare workers has been affected by pandemic guidelines. This study aimed to evaluate the influence of an audio-mediated intervention for patient health education (PHE) on treatment compliance and treatment satisfaction among patients seeking prosthodontic treatment during the Covid pandemic. Methods: A total of 666 patients (aged 40-70 years) who fulfilled the study criteria were treated for denture-associated disease. PHE for 5 different categories was performed using an educational audio (MP3) in the experimental group (Group E), and traditional methods (oral/verbal) in the control group (Group C). Patient/clinician satisfaction with the PHE program was evaluated with a pre-validated questionnaire, whereas treatment compliance and satisfaction were evaluated using a denture hygiene index (DHI) and a visual analog scale (VAS). Differences between qualitative variables were determined using the chi-square test, whereas continuous variables were assessed using an unpaired t-test. Differences were considered to be statistically significant at p ≤ 0.05. Results: Patient satisfaction with PHE was significantly higher and differed in the Group E for two parameters: education method (80%), educational material (94%). For all parameters of procedural education, patient/clinician satisfaction was significantly higher for Group E [method (93%), material (85%), patient preparation (89%), personalized education (84%), program (93%)]. From three different ratings of disease education, 70% in Group E rated education as "effective" as compared to 41% in the Group C. Effectiveness of post treatment, education measured through DHI, revealed a lower hygiene score in Group E (m = 1.18) as compared to Group C (m = 2.92), with differences being significant. For treatment satisfaction, patients in Group E rated higher for speech (m = 8.21), ease of chewing (m = 7.36), and general satisfaction (m = 7.9). Conclusion: This study concluded that using audio as a means of imparting PHE positively influences the treatment compliance and satisfaction among outpatients and overcomes the drawback of wearing mask during the pandemic.
RESUMO
PURPOSE OF THE STUDY: Mineral trioxide aggregate (MTA) is a biocompatible material and has excellent sealing ability. It is proved and claimed that it provides double seal due to its physical sealing ability as well as ability to induce cementogenesis that provides biological seal. AIM AND OBJECTIVES: The aim of the study was to assess the shear bond strength of MTA with three different types of adhesive systems: (1) self-adhering flowable composite, (2) etch and rinse (ER) adhesive system, and (3) self-etch (SE) adhesive system. MATERIALS AND METHODS: Ninety MTA specimens were prepared using cylindrical acrylic blocks, having a central cavity with 2 mm depth and 4 mm diameter. MTA was mixed and placed in the prepared cavity and was covered with moist cotton pellet and temporary filling material (Cavit). They were further divided into three groups which were further divided into two subgroups. After the bonding agents was applied, the composite resin was placed over the MTA surface. The specimens were then tested for shear bond strength; statically analysis was done. RESULT: After 24 h, the mean value of ER group was found to be significantly higher than SE and the self-adhering composite groups. Among the 45 min groups, there was no significant difference observed. CONCLUSION: In single visit, after 45 min, self-adhering flowable can be used successfully as a final restorative material in place of conventional flowable composite without using any alternative adhesive system over MTA.