Why is it so hard to enact responsible change?: Scientists need to work more closely with other social groups to implement sustainable innovation.

Science is key to developing sustainable products and solutions. But scientists also need to work more with governments, industry and society to help implement those solutions.

Synthetic metabolons for metabolic engineering.

It has been proposed that enzymes can associate into complexes (metabolons) that increase the efficiency of metabolic pathways by channelling substrates between enzymes. Metabolons may increase flux by increasing the local concentration of intermediates, decreasing the concentration of enzymes needed to maintain a given flux, directing the products of a pathway to a specific subcellular location or minimizing the escape of reactive intermediates. Metabolons can be formed by relatively loose non-covalent protein-protein interaction, anchorage to membranes, and (in bacteria) by encapsulation of enzymes in protein-coated microcompartments. Evidence that non-coated metabolons are effective at channelling substrates is scarce and difficult to obtain. In plants there is strong evidence that small proportions of glycolytic enzymes are associated with the outside of mitochondria and are effective in substrate channelling. More recently, synthetic metabolons, in which enzymes are scaffolded to synthetic proteins or nucleic acids, have been expressed in microorganisms and these provide evidence that scaffolded enzymes are more effective than free enzymes for metabolic engineering. This provides experimental evidence that metabolons may have a general advantage and opens the way to improving the outcome of metabolic engineering in plants by including synthetic metabolons in the toolbox.

Heme-responsive DNA binding by the global iron regulator Irr from Rhizobium leguminosarum.

Heme, a physiologically crucial form of iron, is a cofactor for a very wide range of proteins and enzymes. These include DNA regulatory proteins in which heme is a sensor to which an analyte molecule binds, effecting a change in the DNA binding affinity of the regulator. Given that heme, and more generally iron, must be carefully regulated, it is surprising that there are no examples yet in bacteria in which heme itself is sensed directly by a reversibly binding DNA regulatory protein. Here we show that the Rhizobium leguminosarum global iron regulatory protein Irr, which has many homologues within the alpha-proteobacteria and is a member of the Fur superfamily, binds heme, resulting in a dramatic decrease in affinity between the protein and its cognate, regulatory DNA operator sequence. Spectroscopic studies of wild-type and mutant Irr showed that the principal (but not only) heme-binding site is at a conserved HXH motif, whose substitution led to loss of DNA binding in vitro and of regulatory function in vivo. The R. leguminosarum Irr behaves very differently to the Irr of Bradyrhizobium japonicum, which is rapidly degraded in vivo by an unknown mechanism in conditions of elevated iron or heme, but whose DNA binding affinity in vitro does not respond to heme.

Mechanistic insights into Cu(I) cluster transfer between the chaperone CopZ and its cognate Cu(I)-transporting P-type ATPase, CopA.

Multinuclear Cu(I) clusters are common in nature, but little is known about their formation or transfer between proteins. CopZ and CopA from Bacillus subtilis, which are involved in a copper-efflux pathway, both readily accommodate multinuclear Cu(I) clusters. Using the luminescence properties of a multinuclear Cu(I)-bound form of the two N-terminal soluble domains of CopA (CopAab) we have investigated the thermodynamic and kinetic properties of cluster formation and loss. We demonstrate that Cu(I)-bound forms of dimeric CopZ containing more than one Cu(I) per CopZ monomer can transfer Cu(I) to apo-CopAab, leading to the formation of luminescent dimeric CopAab. Kinetic studies demonstrated that transfer is a first-order process and that the rate-determining steps for transfer from CopZ to CopAab and vice versa are different processes. The rate of formation of luminescent CopAab via transfer of Cu(I) from CopZ was more rapid than that observed when Cu(I) was added 'directly' from solution or in complex with a cysteine variant of CopZ, indicating that transfer occurs via a transient protein-protein complex. Such a complex would probably require the interaction of at least one domain of CopAab with the CopZ dimer. Insight into how such a complex might form is provided by the high resolution crystal structure of Cu3(CopZ)3, a thus far unique trimeric form of CopZ containing a trinuclear Cu(I) cluster. Modelling studies showed that one of the CopZ monomers can be substituted for either domain of CopAab, resulting in a heterotrimer, thus providing a model for a 'trapped' copper exchange complex.

A tetranuclear Cu(I) cluster in the metallochaperone protein CopZ.

Copper trafficking proteins and copper-sensitive regulators are often found to be able to bind multiple Cu(I) ions in the form of Cu(I) clusters. We have determined the high-resolution X-ray crystal structure of an Atx1-like copper chaperone protein from Bacillus subtilis containing a novel tetranuclear Cu(I) cluster. The identities and oxidation states of the cluster ions were established unambiguously by refinement of X-ray energy-dependent anomalous scattering factors. The [Cu(4)(S-Cys)(4)(N-His)(2)] cluster geometry provides new structural insights into not only the binding of multiple cuprous ions by metallochaperones but also protein-associated tetranuclear Cu(I) clusters, including those found in eukaryotic copper-responsive transcription factors.

High Cu(I) and low proton affinities of the CXXC motif of Bacillus subtilis CopZ.

CopZ, an Atx1-like copper chaperone from the bacterium Bacillus subtilis, functions as part of a complex cellular machinery for Cu(I) trafficking and detoxification, in which it interacts specifically with the transmembrane Cu(I)-transporter CopA. Here we demonstrate that the cysteine residues of the MXCXXC Cu(I)-binding motif of CopZ have low proton affinities, with both exhibiting pK(a) values of 6 or below. Chelator competition experiments demonstrated that the protein binds Cu(I) with extremely high affinity, with a small but significant pH-dependence over the range pH 6.5-8.0. From these data, a pH-corrected formation constant, beta(2)= approximately 6 x 10(22) M(-2), was determined. Rapid exchange of Cu(I) between CopZ and the Cu(I)-chelator BCS (bathocuproine disulfonate) indicated that the mechanism of exchange does not involve simple dissociation of Cu(I) from CopZ (or BCS), but instead proceeds via the formation of a transient Cu(I)-mediated protein-chelator complex. Such a mechanism has similarities to the Cu(I)-exchange pathway that occurs between components of copper-trafficking pathways.

Structure and Cu(I)-binding properties of the N-terminal soluble domains of Bacillus subtilis CopA.

CopA, a P-type ATPase from Bacillus subtilis, plays a major role in the resistance of the cell to copper by effecting the export of the metal across the cytoplasmic membrane. The N-terminus of the protein features two soluble domains (a and b), that each contain a Cu(I)-binding motif, MTCAAC. We have generated a stable form of the wild-type two-domain protein, CopAab, and determined its solution structure. This was found to be similar to that reported previously for a higher stability S46V variant, with minor differences mostly confined to the Ser(46)-containing beta3-strand of domain a. Chemical-shift analysis demonstrated that the two Cu(I)-binding motifs, located at different ends of the protein molecule, are both able to participate in Cu(I) binding and that Cu(I) is in rapid exchange between protein molecules. Surprisingly, UV-visible and fluorescence spectroscopy indicate very different modes of Cu(I) binding below and above a level of 1 Cu(I) per protein, consistent with a major structural change occurring above 1 Cu(I) per CopAab. Analytical equilibrium centrifugation and gel filtration results show that this is a result of Cu(I)-mediated dimerization of the protein. The resulting species is highly luminescent, indicating the presence of a solvent-shielded Cu(I) cluster.

A design of experiments approach for the rapid formulation of a chemically defined medium for metabolic profiling of industrially important microbes.

Geobacillus thermoglucosidans DSM2542 is an industrially important microbe, however the complex nutritional requirements of Geobacilli confound metabolic engineering efforts. Previous studies have utilised semi-defined media recipes that contain complex, undefined, biologically derived nutrients which have unknown ingredients that cannot be quantified during metabolic profiling. This study used design of experiments to investigate how individual nutrients and interactions between these nutrients contribute to growth. A mathematically derived defined medium has been formulated that has been shown to robustly support growth of G. thermoglucosidans in two different environmental conditions (96-well plate and shake flask) and with a variety of lignocellulose-based carbohydrates. This enabled the catabolism of industrially relevant carbohydrates to be investigated.

Rapid, Heuristic Discovery and Design of Promoter Collections in Non-Model Microbes for Industrial Applications.

Well-characterized promoter collections for synthetic biology applications are not always available in industrially relevant hosts. We developed a broadly applicable method for promoter identification in atypical microbial hosts that requires no a priori understanding of cis-regulatory element structure. This novel approach combines bioinformatic filtering with rapid empirical characterization to expand the promoter toolkit and uses machine learning to improve the understanding of the relationship between DNA sequence and function. Here, we apply the method in Geobacillus thermoglucosidasius, a thermophilic organism with high potential as a synthetic biology chassis for industrial applications. Bioinformatic screening of G. kaustophilus, G. stearothermophilus, G. thermodenitrificans, and G. thermoglucosidasius resulted in the identification of 636 100 bp putative promoters, encompassing the genome-wide design space and lacking known transcription factor binding sites. Eighty of these sequences were characterized in vivo, and activities covered a 2-log range of predictable expression levels. Seven sequences were shown to function consistently regardless of the downstream coding sequence. Partition modeling identified sequence positions upstream of the canonical -35 and -10 consensus motifs that were predicted to strongly influence regulatory activity in Geobacillus, and artificial neural network and partial least squares regression models were derived to assess if there were a simple, forward, quantitative method for in silico prediction of promoter function. However, the models were insufficiently general to predict pre hoc promoter activity in vivo, most probably as a result of the relatively small size of the training data set compared to the size of the modeled design space.

A Hybrid Sequencing Approach Completes the Genome Sequence of Thermoanaerobacter ethanolicus JW 200.

Thermoanaerobacter ethanolicus JW 200 has been identified as a potential sustainable biofuel producer due to its ability to readily ferment carbohydrates to ethanol. A hybrid sequencing approach, combining Oxford Nanopore and Illumina DNA sequence reads, was applied to produce a single contiguous genome sequence of 2,911,280 bp.

Kinetic analysis of copper transfer from a chaperone to its target protein mediated by complex formation.

Chaperone proteins that traffic copper around the cell minimise its toxicity by maintaining it in a tightly bound form. The transfer of copper from chaperones to target proteins is promoted by complex formation, but the kinetic characteristics of transfer have yet to be demonstrated for any chaperone-target protein pair. Here we report studies of copper transfer between the Atx1-type chaperone CopZ from Bacillus subtilis and the soluble domains of its cognate P-type ATPase transporter, CopAab. Transfer of copper from CopZ to CopAab was found to occur rapidly, with a rate constant at 25 °C of ∼267 s-1, many orders of magnitude higher than that for Cu(i) dissociation from CopZ in the absence of CopAab. The data demonstrate that complex formation between CopZ and CopAab, evidence for which is provided by NMR and electrospray ionisation mass spectrometry, dramatically enhances the rate of Cu(i) dissociation from CopZ.

CopAb, the second N-terminal soluble domain of Bacillus subtilis CopA, dominates the Cu(I)-binding properties of CopAab.

The Cu(I)-detoxifying P-type ATPase CopA from Bacillus subtilis contains two N-terminal soluble domains, CopAa and CopAb, connected by a short linker. This arrangement is extremely common in prokaryotic Cu(I) transporters and is also found amongst the multiple soluble domains of eukaryotic homologues. Previous studies of a protein containing only these domains (CopAab) revealed complex Cu(I)-binding properties: both domains are able to bind Cu(I) extremely tightly and, at levels of Cu(I) > 1 per CopAab, the protein undergoes dimerisation, yielding a highly luminescent multi-Cu(I) bound species (Singleton and Le Brun, Dalton Trans., 2009, 688-696). To investigate this complex Cu(I)-binding behaviour and, in particular, to determine the contributions of the two domains to the overall behaviour of the N-terminal part, we generated and purified each domain in isolation. Here, we report studies of the second domain, CopAb. The protein was found to bind Cu(I) with an extremely high affinity (K = ~1 × 10(18) M(-1)) and remained as a monomer up to a level of 1 Cu(I) per protein. Above this level, the protein dimerised, generating a weakly luminescent species. Studies of the acid-base properties of the binding motif Cys residues revealed pK(a) values of < ~5 and ~6.3, adding further support to the proposal that high Cu(I)-affinity is correlated with low proton affinity. Exchange of Cu(I) between the protein and a high affinity chelator was found to occur rapidly via Cu(I)-mediated association, a process that is relevant to in vivo Cu(I) trafficking. Overall, the Cu(I)-binding properties of CopAb are very similar to those of the two-domain protein CopAab, indicating that this domain plays a dominant role in determining the binding properties of CopAab.

Effect of Metals on the Lytic Cycle of the Coccolithovirus, EhV86.

In this study we show that metals, and in particular copper (Cu), can disrupt the lytic cycle in the Emiliania huxleyi - EhV86 host-virus system. E. huxleyi lysis rates were reduced at high total Cu concentrations (> approximately 500 nM) in the presence and absence of EDTA (ethylenediaminetetraacetic acid) in acute short term exposure experiments. Zinc (Zn), cadmium (Cd), and cobalt (Co) were not observed to affect the lysis rate of EhV86 in these experiments. The cellular glutathione (GSH) content increased in virus infected cells, but not as a result of metal exposure. In contrast, the cellular content of phytochelatins (PCs) increased only in response to metal exposure. The increase in glutathione content is consistent with increases in the production of reactive oxygen species (ROS) on viral lysis, while increases in PC content are likely linked to metal homeostasis and indicate that metal toxicity to the host was not affected by viral infection. We propose that Cu prevents lytic production of EhV86 by interfering with virus DNA (deoxyribonucleic acid) synthesis through a transcriptional block, which ultimately suppresses the formation of ROS.

Cu(I)- and proton-binding properties of the first N-terminal soluble domain of Bacillus subtilis CopA.

CopA, a P-type ATPase transporter involved in copper detoxification in Bacillus subtilis, contains two soluble Atx1-like domains separated by a short linker at its N-terminus, an arrangement that occurs widely in copper transporters from both prokaryotes and eukaryotes. Both domains were previously found to bind Cu(I) with very high affinity. Above a level of 1 Cu(I) per CopAab, dimerization occurred, leading to a highly luminescent multinuclear Cu(I) species [Singleton C & Le Brun NE (2009) Dalton Trans, 688-696]. To try to understand the contributions of each domain to the complex Cu(I)-binding behaviour of this and related proteins, we purified a wild-type form of the first domain (CopAa). In isolation, the domain bound Cu(I) with very high affinity (K = ∼ 1 × 10(18) m(-1) ) and underwent Cu(I)-mediated protein association, resulting in a mixture of dimer and tetramer species. Addition of further Cu(I) up to 1 Cu(I) per CopAa monomer led to a weakly luminescent species, whereas further additions [2 Cu(I) per CopAa monomer] resulted in protein unfolding. Analysis of the MTCAAC binding motif Cys residue acid-base properties revealed pK(a) values of 5.7 and 7.3, consistent with the pH dependence of Cu(I) binding, and with the proposal that low proton affinity is associated with high Cu(I) affinity. Finally, Cu(I) exchange between CopAa and the chelator bathocuproine sulfonate revealed rapid exchange in both directions, demonstrating an interaction between the protein and the chelator that catalyses metal ion transfer. Overall, CopAa exhibits similarities to CopAab in terms of affinity and complexity of Cu(I) binding, but the details of Cu(I) binding are distinct.

Heme binding to the second, lower-affinity site of the global iron regulator Irr from Rhizobium leguminosarum promotes oligomerization.

The iron responsive regulator Irr is found in a wide range of α-proteobacteria, where it regulates many genes in response to the essential but toxic metal iron. Unlike Fur, the transcriptional regulator that is used for iron homeostasis by almost all other bacterial lineages, Irr does not sense Fe(2+) directly, but, rather, interacts with a physiologically important form of iron, namely heme. Recent studies of Irr from the N(2)-fixing symbiont Rhizobium leguminosarum (Irr(Rl)) showed that it binds heme with submicromolar affinity at a His-Xxx-His (HxH) motif. This caused the protein to dissociate from its cognate DNA regulatory iron control element box sequences, thus allowing expression of its target genes under iron-replete conditions. In the present study, we report new insights into the mechanisms and consequences of heme binding to Irr. In addition to the HxH motif, Irr binds heme at a second, lower-affinity site. Spectroscopic studies of wild-type Irr and His variants show that His46 and probably His66 are involved in coordinating heme in a low-spin state at this second site. By contrast to the well-studied Irr from Bradyrhizobium japonicum, neither heme site of Irr(Rl) stabilizes ferrous heme. Furthermore, we show that heme-free Irr(Rl) exists as a mixture of dimeric and larger, likely hexameric, forms and that heme binding promotes Irr(Rl) oligomerization. Bioanalytical studies of Irr(Rl) variants showed that this property is not dependent on the HxH motif but is associated with heme binding at the second site. STRUCTURED DIGITAL ABSTRACT: • Irr binds to irr by molecular sieving (View Interaction 1, 2) • Irr binds to irr by cosedimentation in solution (View interaction).

Impact of regional comorbidity on infective endocarditis in a southeastern United States medical center.

INTRODUCTION: Recent reports differ regarding microbiologic and epidemiologic characteristics of infectious endocarditis (IE). The authors studied cases presenting to our institution from 2001 to 2006, hypothesizing regional variation in patient populations and comorbidity (especially end-stage renal disease) significantly impact IE causative factors and presentation, which may account for conflicting reports in the literature. METHODS: Consecutive IE cases were prospectively identified and characterized. Multivariate logistic regression analysis identified factors associated with Staphylococcus aureus IE. Incidence of IE in populations on and not on hemodialysis (HD) was estimated, and relative frequency of IE in the population requiring HD was calculated. RESULTS: Of 160 cases, infection was community acquired in 48.8%, nonnosocomial healthcare-associated in 35.6% and nosocomial in 15%. S aureus caused infection in 47.5%. No contribution of referral bias to the predominance of S aureus infection was detected. Factors significantly associated with S aureus infection included symptom duration <1 month, HD and persistent bacteremia. Transthoracic echocardiography was less sensitive in detecting IE in community-acquired infection in comparison with nosocomial infection (P = 0.0383). Estimation of IE incidence in the population on HD relative to the population not on HD revealed a 129- to 174-fold increased incidence of IE in this population. S aureus caused IE in 76.2% of patients on HD. CONCLUSION: S aureus is the most frequent cause of IE at our Southeastern institution. Healthcare-associated acquisition, particularly HD, influenced this epidemiological trend. In populations with a high prevalence of HD, the epidemiology of IE may reflect the increased incidence of HD-associated IE caused by S aureus.

The N-terminal soluble domains of Bacillus subtilis CopA exhibit a high affinity and capacity for Cu(I) ions.

CopA from Bacillus subtilis is a Cu(I)-transporting P-type ATPase involved in resistance to high levels of environmental copper. At its N-terminus are two soluble domains, a and b, that, when generated in isolation from the membrane part, have previously been shown to exhibit unusual Cu(I)-binding behaviour: at >1 Cu(I) per CopAab the protein dimerises, resulting in the formation of a species with luminescence properties characteristic of a solvent-shielded Cu(I) cluster. Further insight into the Cu(I)-binding properties of CopAab are now reported. We demonstrate that the initial binding of Cu(I) occurs with very high affinity (K = -4 x 10(17) M(-1)) and that CopAab can accommodate up to 4 Cu(I) per protein and remains dimeric at higher Cu(I)-loadings. Fitting of UV-visible, near UV CD, fluorescence and luminescence spectroscopic titration data supports a model in which Cu(I) binds sequentially to CopAab, and also provides estimates of the association constants for Cu(I)-binding and dimerisation steps. Finally, low molecular weight thiols are shown not to affect the initial binding of Cu(I), but significantly influence binding at levels >1 Cu(I) per CopAab such that dimerisation is inhibited, though not abolished.

Distinct characteristics of Ag+ and Cd2+ binding to CopZ from Bacillus subtilis.

The chaperone CopZ together with the P-type ATPase transporter CopA constitute a copper-detoxification system in Bacillus subtilis that is commonly found in bacteria and higher cells. Previous studies of the regulation of the copZA operon showed that expression is significantly upregulated in response to elevated concentrations of environmental silver and cadmium, as well as copper. Here, we have used spectroscopic and bioanalytical methods to investigate in detail the capacity of CopZ to bind these metal ions (as Ag(+) and Cd(2+)). We demonstrate that Ag(+) binding mimics closely that of Cu(+): Ag(+)-mediated dimerisation of the protein occurs, and distinct Ag(+)-bound species are formed at higher Ag(+) loadings. Cd(2+) also binds to CopZ, but exhibits significantly different behaviour. Cd(2+)-mediated dimerisation is only observed at low loadings, such that at 0.5 and one Cd(2+) per CopZ the protein is present mainly in a monomeric form; and multinuclear higher-order forms of Cd(2+)-CopZ are not observed. Competition binding studies reveal that Ag(+) binds with an affinity very similar to that of Cu(+), while Cd(2+) binding is significantly weaker. These data provide support for the proposal that CopZ may be involved in the detoxification of silver and cadmium, in addition to copper.

Atx1-like chaperones and their cognate P-type ATPases: copper-binding and transfer.

Copper is an essential yet toxic metal ion. To satisfy cellular requirements, while, at the same time, minimizing toxicity, complex systems of copper trafficking have evolved in all cell types. The best conserved and most widely distributed of these involve Atx1-like chaperones and P(1B)-type ATPase transporters. Here, we discuss current understanding of how these chaperones bind Cu(I) and transfer it to the Atx1-like N-terminal domains of their cognate transporter.

Effect of phosphate on bacterioferritin-catalysed iron(II) oxidation.

The iron(III) mineral cores of bacterioferritins (BFRs), as isolated, contain a significant component of phosphate, with an iron-to-phosphate ratio approaching 1:1 in some cases. In order to better understand the in vivo core-formation process, the effect of phosphate on in vitro core formation in Escherichia coli BFR was investigated. Iron cores reconstituted in the presence of phosphate were found to have iron-to-phosphate ratios similar to those of native cores, and possessed electron paramagnetic resonance properties characteristic of the phosphate-rich core. Phosphate did not affect the stoichiometry of the initial iron(II) oxidation reaction that takes place at the intrasubunit dinuclear iron-binding sites (phase 2 of core formation), but did increase the rate of oxidation. Phosphate had a more significant effect on subsequent core formation (the phase 3 reaction), increasing the rate up to five-fold at pH 6.5 and 25 degrees C. The dependence of the phase 3 rate on phosphate was complex, being greatest at low phosphate and gradually decreasing until the point of saturation at approximately 2 mM phosphate (for iron(II) concentrations <200 microM). Phosphate caused a significant decrease in the absorption properties of both phase 2 and phase 3 products, and the phosphate dependence of the latter mirrored the observed rate dependence, suggesting that distinct iron(III)-phosphate species are formed at different phosphate concentrations. The effect of phosphate on absorption properties enabled the observation of previously undetected events in the phase 2 to phase 3 transition period.