Impact of the Ceria Particle Oxidation State on the Collecting Properties of Sophorolipids and Benzohydroxamic Acid.

The search for environmentally friendly alternatives to petroleum-based reagents in mineral processing requires fundamental studies of novel chemicals in model mineral systems. In this study, we evaluate the potential of acidic (ASL) and lactonic sophorolipids (LSL) as collectors in the froth flotation of ultrafine ceria, which serves as a model rare earth mineral (REM). We compare these two biosurfactants to a conventional petroleum-based collector, benzohydroxamic acid (BHA), in the flotation of ceria against hematite and quartz particles. Our research shows the effect of the oxidation state of ceria on its interaction with both conventional and sophorolipid collectors, which can serve as a tool for selective separation in the applied chemistry of froth flotation. It was found that the affinity of the metal oxides to the biosurfactants at pH 4 decreases in the order of α-Fe2O3 > CeO2 (red) > CeO2 (ox), where the best collector of ultrafine ceria against hematite is BHA. To support our findings, we study collector-mineral interactions through mini-flotation tests, adsorption density, contact angle, and zeta potential analyses. In addition, we evaluate the stability of the froth during the flotation of the biosurfactants. Our results indicate that modifying the oxidation state of ceria and using sophorolipids hold promise for the sustainable flotation of REM.

Piezoactive Bioorganic Diphenylalanine Films: Mechanism of Phase Formation.

Self-organized peptides are unique materials with various applications in biology, medicine, and nanotechnology. Many of these applications require fabrication of homogeneous thin films having high piezoelectric effect and sufficiently low roughness. Recently, a facile method for the controlled deposition of flat solid films of the most studied peptide, diphenylalanine (FF), has been proposed, which is based on the crystallization of FF in the amorphous phase under the action of water vapor. This method is very advantageous compared with crystallization from a liquid phase reported previously. Here, we thoroughly investigate the mechanism of solid-state transformation from the amorphous to crystalline phase. The study revealed that the process proceeds in two distinct stages, maintaining clamped condition of self-assembling building blocks that preserve the films' morphology and high piezoelectric activity. We emphasize the critical role of water diffusion that governs two-dimensional growth of crystalline domains in FF films, merging in very dense, flat, and homogeneous films. These findings open a wide perspective for using this methodology for the direct fabrication of biofilms from the amorphous phase. We thus expect the application of these films to various nanotechnological applications of self-assembled structures.

Triboelectric Generator Based on Oriented Self-Assembled Peptide Microbelts.

Along with piezoelectric nanogenerators, triboelectric nanogenerators (TENGs) collecting energy from mechanical vibrations proved to be simple, low-cost, and efficient sources of electricity for various applications. In view of possible biomedical applications, the search for TENGs made of biomolecular and biocompatible materials is demanding. Diphenylalanine (FF) microstructures are promising for these applications due to their unique characteristics and ability to form various morphologies (microribbons, spherical vesicles, fibrils, micro- and nanotubes, nanorods, etc.). In this work, we developed a contact-separate mode TENG based on arrays of oriented FF microbelts deposited by dip-coating technique and studied their performance under various temperature treatments. We show that these TENGs outperform piezoelectric nanogenerators based on FF microbelts in terms of short-circuit current (ISC), open-circuit voltage (VOC), and output power. It was found that bound water captured in FF nanochannels mainly affects VOC, whereas mobile water increases ISC. We also found that the cyclization of FF molecules increases the performance of TENG likely due to an increase in surface energy and surface flattening.

Hybrid Triboelectric-Electromagnetic Nanogenerators for Mechanical Energy Harvesting: A Review.

Motion-driven electromagnetic-triboelectric energy generators (E-TENGs) hold a great potential to provide higher voltages, higher currents and wider operating bandwidths than both electromagnetic and triboelectric generators standing alone. Therefore, they are promising solutions to autonomously supply a broad range of highly sophisticated devices. This paper provides a thorough review focused on major recent breakthroughs in the area of electromagnetic-triboelectric vibrational energy harvesting. A detailed analysis was conducted on various architectures including rotational, pendulum, linear, sliding, cantilever, flexible blade, multidimensional and magnetoelectric, and the following hybrid technologies. They enable highly efficient ways to harvest electric energy from many forms of vibrational, rotational, biomechanical, wave, wind and thermal sources, among others. Open-circuit voltages up to 75 V, short-circuit currents up to 60 mA and instantaneous power up to 144 mW were already achieved by these nanogenerators. Their transduction mechanisms, including proposed models to make intelligible the involved physical phenomena, are also overviewed here. A comprehensive analysis was performed to compare their respective construction designs, external excitations and electric outputs. The results highlight the potential of hybrid E-TENGs to convert unused mechanical motion into electric energy for both large- and small-scale applications. Finally, this paper proposes future research directions toward optimization of energy conversion efficiency, power management, durability and stability, packaging, energy storage, operation input, research of transduction mechanisms, quantitative standardization, system integration, miniaturization and multi-energy hybrid cells.

Natural and Eco-Friendly Materials for Triboelectric Energy Harvesting.

Triboelectric nanogenerators (TENGs) are promising electric energy harvesting devices as they can produce renewable clean energy using mechanical excitations from the environment. Several designs of triboelectric energy harvesters relying on biocompatible and eco-friendly natural materials have been introduced in recent years. Their ability to provide customizable self-powering for a wide range of applications, including biomedical devices, pressure and chemical sensors, and battery charging appliances, has been demonstrated. This review summarizes major advances already achieved in the field of triboelectric energy harvesting using biocompatible and eco-friendly natural materials. A rigorous, comparative, and critical analysis of preparation and testing methods is also presented. Electric power up to 14 mW was already achieved for the dry leaf/polyvinylidene fluoride-based TENG devices. These findings highlight the potential of eco-friendly self-powering systems and demonstrate the unique properties of the plants to generate electric energy for multiple applications.

Efficient Water Self-Diffusion in Diphenylalanine Peptide Nanotubes.

Nanotubes of self-assembled dipeptides exemplified by diphenylalanine (FF) demonstrate a wide range of useful functional properties, such as high Young's moduli, strong photoluminescence, remarkable piezoelectricity and pyroelectricity, optical waveguiding, etc., and became the object of intensive research due to their ability to combine electronic and biological functions in the same material. Two types of nanoconfined water molecules (bound water directly interacting with the peptide backbone and free water located inside nanochannels) are known to play a key role in the self-assembly of FF. Bound water provides its structural integrity, whereas movable free water influences its functional response. However, the intrinsic mechanism of water motion in FF nanotubes remained elusive. In this work, we study the sorption properties of FF nanotubes directly considering them as a microporous material and analyze the free water self-diffusion at different temperatures. We found a change in the regime of free water diffusion, which is attributed to water cluster size in the nanochannels. Small clusters of less than five molecules per unit cell exhibit ballistic diffusion, whereas, for larger clusters, Fickian diffusion occurs. External conditions of around 40% relative humidity at 30 °C enable the formation of such large clusters, for which the diffusion coefficient reaches 1.3 × 10-10 m2 s-1 with an activation energy of 20 kJ mol-1, which increases to attain 3 × 10-10 m2 s-1 at 65 °C. The observed peculiarities of water self-diffusion along the narrow FF nanochannels endow this class of materials with a new functionality. Possible applications of FF nanotubes in nanofluidic devices are discussed.

Diphenylalanine-Based Microribbons for Piezoelectric Applications via Inkjet Printing.

Peptide-based nanostructures are very promising for nanotechnological applications because of their excellent self-assembly properties, biological and chemical flexibility, and unique multifunctional performance. However, one of the limiting factors for the integration of peptide assemblies into functional devices is poor control of their alignment and other geometrical parameters required for device fabrication. In this work, we report a novel method for the controlled deposition of one of the representative self-assembled peptides-diphenylalanine (FF)-using a commercial inkjet printer. The initial FF solution, which has been shown to readily self-assemble into different structures such as nano- and microtubes and microrods, was modified to be used as an efficient ink for the printing of aligned FF-based structures. Furthermore, during the development of the suitable ink, we were able to produce a novel type of FF conformation with high piezoelectric response and excellent stability. By using this method, ribbonlike microcrystals based on FF could be formed and precisely patterned on different surfaces. Possible mechanisms of structure formation and piezoelectric effect in printed microribbons are discussed along with the possible applications.