Metastable hexagonal close-packed palladium hydride in liquid cell TEM.

Metastable phases-kinetically favoured structures-are ubiquitous in nature1,2. Rather than forming thermodynamically stable ground-state structures, crystals grown from high-energy precursors often initially adopt metastable structures depending on the initial conditions, such as temperature, pressure or crystal size1,3,4. As the crystals grow further, they typically undergo a series of transformations from metastable phases to lower-energy and ultimately energetically stable phases1,3,4. Metastable phases sometimes exhibit superior physicochemical properties and, hence, the discovery and synthesis of new metastable phases are promising avenues for innovations in materials science1,5. However, the search for metastable materials has mainly been heuristic, performed on the basis of experiences, intuition or even speculative predictions, namely 'rules of thumb'. This limitation necessitates the advent of a new paradigm to discover new metastable phases based on rational design. Such a design rule is embodied in the discovery of a metastable hexagonal close-packed (hcp) palladium hydride (PdHx) synthesized in a liquid cell transmission electron microscope. The metastable hcp structure is stabilized through a unique interplay between the precursor concentrations in the solution: a sufficient supply of hydrogen (H) favours the hcp structure on the subnanometre scale, and an insufficient supply of Pd inhibits further growth and subsequent transition towards the thermodynamically stable face-centred cubic structure. These findings provide thermodynamic insights into metastability engineering strategies that can be deployed to discover new metastable phases.

Image-charge effects on ion adsorption near aqueous interfaces.

Electrostatic interactions near surfaces and interfaces are ubiquitous in many fields of science. Continuum electrostatics predicts that ions will be attracted to conducting electrodes but repelled by surfaces with lower dielectric constant than the solvent. However, several recent studies found that certain "chaotropic" ions have similar adsorption behavior at air/water and graphene/water interfaces. Here we systematically study the effect of polarization of the surface, the solvent, and solutes on the adsorption of ions onto the electrode surfaces using molecular dynamics simulation. An efficient method is developed to treat an electrolyte system between two parallel conducting surfaces by exploiting the mirror-expanded symmetry of the exact image-charge solution. With neutral surfaces, the image interactions induced by the solvent dipoles and ions largely cancel each other, resulting in no significant net differences in the ion adsorption profile regardless of the surface polarity. Under an external electric field, the adsorption of ions is strongly affected by the surface polarization, such that the charge separation across the electrolyte and the capacitance of the cell is greatly enhanced with a conducting surface over a low-dielectric-constant surface. While the extent of ion adsorption is highly dependent on the electrolyte model (the polarizability of solvent and solutes, as well as the van der Waals radii), we find the effect of surface polarization on ion adsorption is consistent throughout different electrolyte models.

Enhancing ion transport in charged block copolymers by stabilizing low symmetry morphology: Electrostatic control of interfaces.

Recently, the interest in charged polymers has been rapidly growing due to their uses in energy storage and transfer devices. Yet, polymer electrolyte-based devices are not on the immediate horizon because of the low ionic conductivity. In the present study, we developed a methodology to enhance the ionic conductivity of charged block copolymers comprising ionic liquids through the electrostatic control of the interfacial layers. Unprecedented reentrant phase transitions between lamellar and A15 structures were seen, which cannot be explained by well-established thermodynamic factors. X-ray scattering experiments and molecular dynamics simulations revealed the formation of fascinating, thin ionic shell layers composed of ionic complexes. The ionic liquid cations of these complexes predominantly presented near the micellar interfaces if they had strong binding affinity with the charged polymer chains. Therefore, the interfacial properties and concentration fluctuations of the A15 structures were crucially dependent on the type of tethered acid groups in the polymers. Overall, the stabilization energies of the A15 structures were greater when enriched, attractive electrostatic interactions were present at the micellar interfaces. Contrary to the conventional wisdom that block copolymer interfaces act as "dead zone" to significantly deteriorate ion transport, this study establishes a prospective avenue for advanced polymer electrolyte having tailor-made interfaces.

Sculpting In-plane Fractal Porous Patterns in Two-Dimensional MOF Nanocrystals for Photoelectrocatalytic CO2 Reduction.

Herein, by choosing few-nm-thin two-dimensional (2D) nanocrystals of MOF-5 containing in-planner square lattices as a modular platform, a crystal lattice-guided wet-chemical etching has been rationally accomplished. As a result, two attractive pore patterns carrying Euclidean curvatures; precisely, plus(+)-shaped and fractal-patterned pores via ⟨100⟩ and ⟨110⟩ directional etching, respectively, are regulated in contrast to habitually formed spherical-shaped random etches on MOF surface. In agreement with the theoretical calculations, a diffusion-limited etching process has been optimized to devise high-yield of size-tunable fractal-pores on the MOF surface that tenders for a compatibly high payload of catalytic ReI -complexes using the existing large edge area once modified into a free amine-group-exposed inner pore surface. Finally, on benefiting from the long-range fractal opening in 2D MOF support structure, while loaded on an electrode surface, a facilitated cross-interface charge-transportation and well-exposure of immobilized ReI -catalysts are anticipated, thus realizing enhanced activity and stability of the supported catalyst in photoelectrochemical CO2 -to-CO reduction.

Au/Pt-Egg-in-Nest Nanomotor for Glucose-Powered Catalytic Motion and Enhanced Molecular Transport to Living Cells.

Nanostructures converting chemical energy to mechanical work by using benign metabolic fuels, have huge implications in biomedical science. Here, we introduce Au/Pt-based Janus nanostructures, resembling to "egg-in-nest" morphology (Au/Pt-ENs), showing enhanced motion as a result of dual enzyme-relay-like catalytic cascade in physiological biomedia, and in turn showing molecular-laden transport to living cells. We developed dynamic-casting approach using silica yolk-shell nanoreactors: first, to install a large Au-seed fixing the silica-yolk aside while providing the anisotropically confined concave hollow nanospace to grow curved Pt-dendritic networks. Owing to the intimately interfaced Au and Pt catalytic sites integrated in a unique anisotropic nest-like morphology, Au/Pt-ENs exhibited high diffusion rates and displacements as the result of glucose-converted oxygen concentration gradient. High diffusiophoresis in cell culture media increased the nanomotor-membrane interaction events, in turn facilitated the cell internalization. In addition, the porous network of Au/Pt-ENs facilitated the drug-molecule cargo loading and delivery to the living cells.

Protonation-Driven Aqueous Lyotropic Self-Assembly of Synthetic Six-Tail Lipidoids.

We report the aqueous lyotropic mesophase behaviors of protonated amine-based "lipidoids," a class of synthetic lipid-like molecules that mirrors essential structural features of the multitail bacterial amphiphile lipid A. Small-angle X-ray scattering (SAXS) studies demonstrate that the protonation of the tetra(amine) headgroups of six-tail lipidoids in aqueous HCl, HNO3, H2SO4, and H3PO4 solutions variably drives their self-assembly into lamellar (Lα) and inverse micellar (III) lyotropic liquid crystals (LLCs), depending on acid identity and concentration, amphiphile tail length, and temperature. Lipidoid assemblies formed in H2SO4(aq) exhibit rare inverse body-centered cubic (BCC) and inverse face-centered cubic (FCC) micellar morphologies, the latter of which unexpectedly coexists with zero mean curvature Lα phases. Complementary atomistic molecular dynamics (MD) simulations furnish detailed insights into this unusual self-assembly behavior. The unique aqueous lyotropic mesophase behaviors of ammonium lipidoids originate in their dichotomous ability to adopt both inverse conical and chain-extended molecular conformations depending on the number of counterions and their identity, which lead to coexisting supramolecular assemblies with remarkably different mean interfacial curvatures.

Ion transport in small-molecule and polymer electrolytes.

Solid-state polymer electrolytes and high-concentration liquid electrolytes, such as water-in-salt electrolytes and ionic liquids, are emerging materials to replace the flammable organic electrolytes widely used in industrial lithium-ion batteries. Extensive efforts have been made to understand the ion transport mechanisms and optimize the ion transport properties. This perspective reviews the current understanding of the ion transport and polymer dynamics in liquid and polymer electrolytes, comparing the similarities and differences in the two types of electrolytes. Combining recent experimental and theoretical findings, we attempt to connect and explain ion transport mechanisms in different types of small-molecule and polymer electrolytes from a theoretical perspective, linking the macroscopic transport coefficients to the microscopic, molecular properties such as the solvation environment of the ions, salt concentration, solvent/polymer molecular weight, ion pairing, and correlated ion motion. We emphasize universal features in the ion transport and polymer dynamics by highlighting the relevant time and length scales. Several outstanding questions and anticipated developments for electrolyte design are discussed, including the negative transference number, control of ion transport through precision synthesis, and development of predictive multiscale modeling approaches.

Cavity hydration dynamics in cytochrome c oxidase and functional implications.

Cytochrome c oxidase (CcO) is a transmembrane protein that uses the free energy of O2 reduction to generate the proton concentration gradient across the membrane. The regulation of competitive proton transfer pathways has been established to be essential to the vectorial transport efficiency of CcO, yet the underlying mechanism at the molecular level remains lacking. Recent studies have highlighted the potential importance of hydration-level change in an internal cavity that connects the proton entrance channel, the site of O2 reduction, and the putative proton exit route. In this work, we use atomistic molecular dynamics simulations to investigate the energetics and timescales associated with the volume fluctuation and hydration-level change in this central cavity. Extensive unrestrained molecular dynamics simulations (accumulatively [Formula: see text]4 [Formula: see text]s) and free energy computations for different chemical states of CcO support a model in which the volume and hydration level of the cavity are regulated by the protonation state of a propionate group of heme a3 and, to a lesser degree, the redox state of heme a and protonation state of Glu286. Markov-state model analysis of [Formula: see text]2-[Formula: see text]s trajectories suggests that hydration-level change occurs on the timescale of 100-200 ns before the proton-loading site is protonated. The computed energetic and kinetic features for the cavity wetting transition suggest that reversible hydration-level change of the cavity can indeed be a key factor that regulates the branching of proton transfer events and therefore contributes to the vectorial efficiency of proton transport.

Molecular Engineering of Coordination Ligand for Multifunctional Sol-Gel Oxides.

Here a ligand exchange strategy for synthesizing sol-gel oxides is demonstrated to achieve multifunctionality including direct photolithography, high dielectric strength, and high charge carrier mobility, which is challenging to obtain in such oxides. For this purpose, a series of bidentate ligands with azide termini and ethylene-glycol bridges is synthesized, and these ligands are universally applicable to the synthesis of a variety of dielectric and semiconductor oxides. Optimized photolithography conditions yield a high-quality ZrO2 dielectric film with a high dielectric constant and strength of ≈18 and ≈7 MV cm-1, respectively. Additionally, this strategy is applied to semiconductor oxides such as In2O3 and ZnO, and the all-oxide-patterned solution-processed thin-film transistor (TFT) demonstrates a high charge carrier mobility of ≈40 cm2 V-1 s-1. An oxide TFT array is fully photopatterned on a 4-inch Si wafer; uniform performances are observed across these devices. This study suggests the possibility of realizing multifunctional oxides for application in advanced electronics using simple ligand exchange chemistry.

Hydrophilic Photocrosslinkers as a Universal Solution to Endow Water Affinity to a Polymer Photocatalyst for an Enhanced Hydrogen Evolution Rate.

A universal approach for enhancing water affinity in polymer photocatalysts by covalently attaching hydrophilic photocrosslinkers to polymer chains is presented. A series of bisdiazirine photocrosslinkers, each comprising bisdiazirine photophores linked by various aliphatic (CL-R) or ethylene glycol-based bridge chains (CL-TEG), is designed to prevent crosslinked polymer photocatalysts from degradation through a safe and efficient photocrosslinking reaction at a wavelength of 365 nm. When employing the hydrophilic CL-TEG as a photocrosslinker with polymer photocatalysts (F8BT), the hydrogen evolution reaction (HER) rate is considerably enhanced by 2.5-fold compared to that obtained using non-crosslinked F8BT photocatalysts, whereas CL-R-based photocatalysts yield HER rates comparable to those of non-crosslinked counterparts. Photophysical analyses including time-resolved photoluminescence and transient absorption measurements reveal that adding CL-TEG accelerates exciton separation, forming long-lived charge carriers. Additionally, the in-depth study using molecular dynamics simulations elucidates the dual role of CL-TEG: it enhances water penetration into the polymer matrix and stabilizes charge carriers after exciton generation against undesirable recombination. Therefore, the strategy highlights endowing a high-permittivity environment within polymer photocatalyst in a controlled manner is crucial for enhancing photocatalytic redox reactivity. Furthermore, this study shows that this hydrophilic crosslinker approach has a broad applicability in general polymer semiconductors and their nanoparticulate photocatalysts.

An accurate expression for the rates of diffusion-influenced bimolecular reactions with long-range reactivity.

By using the recently developed method for solving the Fredholm integral equations of the second kind, we derive a very accurate expression for the steady-state rate constant of diffusion-influenced bimolecular reactions involving long-range reactivity. We consider the general case in which the reactants interact via an arbitrary central potential and hydrodynamic interaction. The rate expression becomes exact in the two opposite limits of small and large reactivity, and also performs very well in the intermediate regime.

Predictive Molecular Models for Charged Materials Systems: From Energy Materials to Biomacromolecules.

Electrostatic interactions play a dominant role in charged materials systems. Understanding the complex correlation between macroscopic properties with microscopic structures is of critical importance to develop rational design strategies for advanced materials. But the complexity of this challenging task is augmented by interfaces present in the charged materials systems, such as electrode-electrolyte interfaces or biological membranes. Over the last decades, predictive molecular simulations that are founded in fundamental physics and optimized for charged interfacial systems have proven their value in providing molecular understanding of physicochemical properties and functional mechanisms for diverse materials. Novel design strategies utilizing predictive models have been suggested as promising route for the rational design of materials with tailored properties. Here, an overview of recent advances in the understanding of charged interfacial systems aided by predictive molecular simulations is presented. Focusing on three types of charged interfaces found in energy materials and biomacromolecules, how the molecular models characterize ion structure, charge transport, morphology relation to the environment, and the thermodynamics/kinetics of molecular binding at the interfaces is discussed. The critical analysis brings two prominent field of energy materials and biological science under common perspective, to stimulate crossover in both research field that have been largely separated.

Superionic Bifunctional Polymer Electrolytes for Solid-State Energy Storage and Conversion.

Achieving superionic conductivity from solid-state polymer electrolytes is an important task in the development of future energy storage and conversion technologies. Herein, a platform for innovative electrolyte technologies based on a bifunctional polymer, poly(3-hydroxy-4-sulfonated styrene) (PS-3H4S), is presented. By incorporating OH and SO3 H functional groups at adjacent positions in the styrene repeating unit, "intra-monomer" hydrogen bonds are formed to effectively weaken the electrostatic interactions of the SO3 - moieties in the polymer matrix with embedded ions, promoting rich structural and dynamic heterogeneity in the PS-3H4S electrolyte. Upon the incorporation of an ionic liquid, interconnected rod-like ion channels, which allow the decoupling of ion relaxation from polymer relaxation, are formed in the stiff motif of the polymeric domains passivated by interfacial ionic layers. This results in accelerated proton hopping through the glassy polymer matrix, and proton hopping becomes more pronounced at cryogenic temperatures down to -35 °C. The PS-3H4S/ionic liquid composite electrolytes exhibit a high ionic conductivity of 10-3 S cm-1 and high storage modulus of ≈100 MPa at 25 °C, and can be successfully applied in soft actuators and lithium-metal batteries.

G-Quadruplex-Filtered Selective Ion-to-Ion Current Amplification for Non-Invasive Ion Monitoring in Real Time.

Living cells efflux intracellular ions for maintaining cellular life, so intravital measurements of specific ion signals are of significant importance for studying cellular functions and pharmacokinetics. In this work, de novo synthesis of artificial K+ -selective membrane and its integration with polyelectrolyte hydrogel-based open-junction ionic diode (OJID) is demonstrated, achieving a real-time K+ -selective ion-to-ion current amplification in complex bioenvironments. By mimicking biological K+ channels and nerve impulse transmitters, in-line K+ -binding G-quartets are introduced across freestanding lipid bilayers by G-specific hexylation of monolithic G-quadruplex, and the pre-filtered K+ flow is directly converted to amplified ionic currents by the OJID with a fast response time at 100 ms intervals. By the synergistic combination of charge repulsion, sieving, and ion recognition, the synthetic membrane allows K+ transport exclusively without water leakage; it is 250× and 17× more permeable toward K+ than monovalent anion, Cl- , and polyatomic cation, N-methyl-d-glucamine+ , respectively. The molecular recognition-mediated ion channeling provides a 500% larger signal for K+ as compared to Li+ (0.6× smaller than K+ ) despite the same valence. Using the miniaturized device, non-invasive, direct, and real-time K+ efflux monitoring from living cell spheroids is achieved with minimal crosstalk, specifically in identifying osmotic shock-induced necrosis and drug-antidote dynamics.

Chain flexibility of medicinal lipids determines their selective partitioning into lipid droplets.

In guiding lipid droplets (LDs) to serve as storage vessels that insulate high-value lipophilic compounds in cells, we demonstrate that chain flexibility of lipids determines their selective migration in intracellular LDs. Focusing on commercially important medicinal lipids with biogenetic similarity but structural dissimilarity, we computationally and experimentally validate that LD remodeling should be differentiated between overproduction of structurally flexible squalene and that of rigid zeaxanthin and ß-carotene. In molecular dynamics simulations, worm-like flexible squalene is readily deformed to move through intertwined chains of triacylglycerols in the LD core, whereas rod-like rigid zeaxanthin is trapped on the LD surface due to a high free energy barrier in diffusion. By designing yeast cells with either much larger LDs or with a greater number of LDs, we observe that intracellular storage of squalene significantly increases with LD volume expansion, but that of zeaxanthin and ß-carotene is enhanced through LD surface broadening; as visually evidenced, the outcomes represent internal penetration of squalene and surface localization of zeaxanthin and ß-carotene. Our study shows the computational and experimental validation of selective lipid migration into a phase-separated organelle and reveals LD dynamics and functionalization.

De novo selected hACE2 mimics that integrate hotspot peptides with aptameric scaffolds for binding tolerance of SARS-CoV-2 variants.

The frequent occurrence of viral variants is a critical problem in developing antiviral prophylaxis and therapy; along with stronger recognition of host cell receptors, the variants evade the immune system-based vaccines and neutralizing agents more easily. In this work, we focus on enhanced receptor binding of viral variants and demonstrate generation of receptor-mimicking synthetic reagents, capable of strongly interacting with viruses and their variants. The hotspot interaction of viruses with receptor-derived short peptides is maximized by aptamer-like scaffolds, the compact and stable architectures of which can be in vitro selected from a myriad of the hotspot peptide-coupled random nucleic acids. We successfully created the human angiotensin-converting enzyme 2 (hACE2) receptor-mimicking hybrid ligand that recruits the hACE2-derived receptor binding domain-interacting peptide to directly interact with a binding hotspot of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2). Experiencing affinity boosting by ~500% to Omicron, the de novo selected hACE2 mimic exhibited a great binding tolerance to all SARS-CoV-2 variants of concern.

Effects of the interaction potential and hydrodynamic interaction on the diffusion-influenced reaction rates.

Recently, we proposed an accurate analytic expression for the diffusive propagator of a pair of particles under a central interaction potential and hydrodynamic interaction, and derived the rate expressions for fully diffusion-controlled geminate and bimolecular reactions. In this work, we present a still more accurate propagator expression, and extend the theory to the partially diffusion-controlled cases with various types of interaction potentials, including the screened Coulomb potential and the potential of mean force due to solvation. We evaluate the accuracies of our theory and other competing theories against exact numerical results. It is shown that the improved rate expressions provide near exact results for most types of interaction potentials.

Communication: Propagator for diffusive dynamics of an interacting molecular pair.

We introduce a new method of solution for the Fredholm integral equations of the second kind. The method would be useful when the direct iterative approach leads to a divergent perturbation series solution. By using the method, we obtain an accurate expression of the propagator for diffusive dynamics of a pair of particles interacting via an arbitrary central potential and hydrodynamic interaction. We test the accuracy of the propagator expression by calculating the diffusion-controlled geminate and bimolecular reaction rates. It is shown that our propagator expression provides very accurate results for the whole time region.

Identifying the proton loading site cluster in the ba3 cytochrome c oxidase that loads and traps protons.

Cytochrome c Oxidase (CcO) is the terminal electron acceptor in aerobic respiratory chain, reducing O2 to water. The released free energy is stored by pumping protons through the protein, maintaining the transmembrane electrochemical gradient. Protons are held transiently in a proton loading site (PLS) that binds and releases protons driven by the electron transfer reaction cycle. Multi-Conformation Continuum Electrostatics (MCCE) was applied to crystal structures and Molecular Dynamics snapshots of the B-type Thermus thermophilus CcO. Six residues are identified as the PLS, binding and releasing protons as the charges on heme b and the binuclear center are changed: the heme a3 propionic acids, Asp287, Asp372, His376 and Glu126B. The unloaded state has one proton and the loaded state two protons on these six residues. Different input structures, modifying the PLS conformation, show different proton distributions and result in different proton pumping behaviors. One loaded and one unloaded protonation states have the loaded/unloaded states close in energy so the PLS binds and releases a proton through the reaction cycle. The alternative proton distributions have state energies too far apart to be shifted by the electron transfers so are locked in loaded or unloaded states. Here the protein can use active states to load and unload protons, but has nearby trapped states, which stabilize PLS protonation state, providing new ideas about the CcO proton pumping mechanism. The distance between the PLS residues Asp287 and His376 correlates with the energy difference between loaded and unloaded states.

Proper Thermal Equilibration of Simulations with Drude Polarizable Models: Temperature-Grouped Dual-Nosé-Hoover Thermostat.

An explicit treatment of electronic polarization is critically important to accurate simulations of highly charged or interfacial systems. Compared to the iterative self-consistent field (SCF) scheme, extended Lagrangian approaches are computationally more efficient for simulations that employ a polarizable force field. However, an appropriate thermostat must be chosen to minimize heat flow and ensure an equipartition of kinetic energy among all unconstrained system degrees of freedom. Here we investigate the effects of different thermostats on the simulation of condensed phase systems with the Drude polarizable force field using several examples that include water, NaCl/water, acetone, and an ionic liquid (IL) BMIM+/BF4-. We show that conventional dual-temperature thermostat schemes often suffer from violations of equipartitioning and adiabatic electronic state, leading to considerable errors in both static and dynamic properties. Heat flow from the real degrees of freedom to the Drude degrees of freedom leads to a steady temperature gradient and puts the system at an incorrect effective temperature. Systems with high-frequency internal degrees of freedom such as planar improper dihedrals or C-H bond stretches are most vulnerable; this issue has been largely overlooked in the literature because of the primary focus on simulations of rigid water molecules. We present a new temperature-grouped dual-Nosé-Hoover thermostat, where the molecular center of mass translations are assigned to a temperature group separated from the rest degrees of freedom. We demonstrate that this scheme predicts correct static and dynamic properties for all the systems tested here, regardless of the thermostat coupling strength. This new thermostat has been implemented into the GPU-accelerated OpenMM simulation package and maintains a significant speedup relative to the SCF scheme.