Epoxy-Coated Side-Polished Fiber-Optic Temperature Sensor for Cryogenic Conditions.

We propose coating side-polished optical fiber (SPF) with epoxy polymer to form a fiber-optic sensor for cryogenic temperature measuring applications. The thermo-optic effect of the epoxy polymer coating layer enhances the interaction between the SPF evanescent field and surrounding medium, considerably improving the temperature sensitivity and robustness of the sensor head in a very low-temperature environment. In tests, due to the evanescent field-polymer coating interlinkage, transmitted optical intensity variation of 5 dB and an average sensitivity of -0.024 dB/K were obtained in the 90-298 K range.

Effect of glucose, soya oil and glutamine on protein expression and mammalian target of rapamycin complex 1 pathway of jejunal crypt enterocytes in weaned piglets.

The present study was conducted to evaluate the effects of glucose, soya oil or glutamine on jejunal morphology, protein metabolism and protein expression of the mammalian target of rapamycin complex 1 (mTORC1) signalling pathway in jejunal villus or crypt compartment of piglets. Forty-two 21 d-weaned piglets were randomly allotted to one of the three isoenergetic diets formulated with glucose, soya oil or glutamine for 28 d. On day 14 or 28, the proteins in crypt enterocytes were analysed with isobaric tags for relative and absolute quantification and proteins involved in mTORC1 signalling pathway in villus or crypt compartment cells were determined by Western blotting. Our results showed no significant differences (P > 0·05) in jejunal morphology among the three treatments on day 14 or 28. The differentially expressed proteins mainly took part in a few network pathways, including antimicrobial or inflammatory response, cell death and survival, digestive system development and function and carbohydrate metabolism. On day 14 or 28, there were higher protein expression of eukaryotic initiation factor-4E binding protein-1 in jejunal crypt compartment of piglets supplemented with glucose or glutamine compared with soya oil. On day 28, higher protein expression of phosphor-mTOR in crypt compartment was observed in piglets supplemented with glucose compared with the soya oil. In conclusion, the isoenergetic glucose, soya oil or glutamine did not affect the jejunal morphology of piglets; however, they had different effects on the protein metabolism in crypt compartment. Compared with soya oil, glucose or glutamine may be better energy supplies for enterocytes in jejunal crypt compartment.

Reducing lesion incidence in pork carcasses by heating foot-and-mouth disease vaccine before injection.

OBJECTIVE: This study was conducted to investigate the effect of heating of foot-and-mouth disease (FMD) vaccine before injection, on the incidence of lesions at the injection site (pork butt), amount of discarded meat, and economical benefit. METHODS: In total, 101,086 piglets raised in 30 farms, were vaccinated in the neck with 2 mL of FMD vaccine at 56 d and 84 d of age using a commercial syringe. The heat treatment group (48,511 pigs) was injected with the FMD vaccine after it had been heated in a water bath at 40°C for 20 min. After slaughter, the incidence of lesions on the pork butt was inspected, and the subsequent amount of discarded meat was recorded. RESULTS: Heat treatment of FMD vaccine reduced the incident rate of lesions on the pork butt (p<0.01). Overall, 17.81% of the pigs in the heat treatment group had lesions, while the incident rate in the control group was 21.70%. The amount of discarded meat per head of total pigs and per head of pigs with lesions were significantly lower in the heat treatment group than the control group (p<0.01). Thus, the proportion of discarded meat to dressed carcass was lower in the heat treatment group (0.249%) compared with the control group (0.338%) (p<0.01). Farms that rear 1,000 sows can gain 1,863,289 KRW (1,600 USD) in one year when they adopt heat treatment of FMD vaccine before injection. CONCLUSION: Heat treatment of FMD vaccine using simple heat equipment (water bath) can be effective in reducing lesions caused by FMD vaccination and increase the economic benefits in pig farms.

The co-injection of antioxidants with foot-and-mouth disease vaccination altered growth performance and blood parameters of finishing Holstein steers.

OBJECTIVE: This study was conducted to evaluate whether the co-injection of antioxidants together with foot-and-mouth disease (FMD) vaccination has the potential to attenuate the negative effects caused by vaccination in Holstein finishing steers. METHODS: A total of 36 finishing Holstein steers (body weight [BW]: 608±45.6 kg, 17 months old) were randomly allocated to one of three treatments: i) control (CON, only FMD vaccination without any co-injection), ii) co-injection of commercial non-steroidal anti-inflammatory drugs (NSAID) with FMD vaccination at a ratio of 10:1 (NSAID vol/FMD vaccine vol) as a positive control (PCON), iii) co-injection of commercial mixture of vitamin E and selenium with FMD vaccination (VITESEL) (1 mL of FMD vaccine+1 mL of antioxidants per 90 kg of BW). Changes in growth performance and blood parameters because of treatments were determined. RESULTS: No significant difference in BW, average daily gain, and dry matter intake of the steers was observed among the treatments. The FMD vaccination significantly increased white blood cells (WBC), neutrophils, platelets, and mean platelet volume (p<0.01) in blood analysis. The count of lymphocyte tended to increase after vaccination (p = 0.08). In blood analysis, steers in VITESEL tended to have higher numbers of WBC, neutrophils, and platelets compared to that of other treatments (p = 0.09, 0.06, and 0.09, respectively). Eosinophils in VITESEL were higher than those in PCON (p<0.01). Among blood metabolites, blood urea nitrogen and aspartate transaminase were significantly increased, but cholesterol, alanine transferase, inorganic phosphorus, Mg, and albumin were decreased after FMD vaccination (p<0.01). CONCLUSION: The use of antioxidants in FMD vaccination did not attenuate growth disturbance because of FMD vaccination. The metabolic changes induced by vaccination were not controlled by the administration of antioxidants. The protective function of antioxidants was effective mainly on the cell counts of leukocytes.

Polymer-coated FBG sensor for simultaneous temperature and strain monitoring in composite materials under cryogenic conditions.

A polymer-coated fiber Bragg grating (PCFBG) is examined for real-time temperature and strain monitoring in composite materials at cryogenic temperatures. The proposed sensor enables the simultaneous measurement of temperature and strain at extremely low temperatures by tracking the changes in the reflected center wavelengths from a pair of PCFBGs embedded in a composite material. The cryogenic temperature sensing was realized by introducing polymer coatings onto bare FBGs, which resulted in high temperature sensitivity under cryogenic conditions. A comparison of wavelength responses of the Bragg grating with and without a polymer coating toward temperatures ranging from 25°C to -180°C was performed. The polymer-coated FBG exhibited a sensitivity of 48 pm/°C, which is 10 times greater than that of the bare FBGs. In addition, the encapsulation of the FBG in a capillary tube made it possible to evaluate the strain accumulated within the composite during operation under cryogenic conditions.

Effects of oral administration of different dosages of carvacrol essential oils on intestinal barrier function in broilers.

Essential oils are widely used in the pharmaceutical, food and cosmetic industries, and many plant essential oils have shown that they have positive effects on broilers nutrition. This experiment was conducted to study the effects of orally administered different dosages of carvacrol essential oils on intestinal barrier function in broiler chickens. A total of eighty 28-day-old (1.28 ± 0.15 kg) ROSS 308 broilers were randomly allocated to four groups of 20 replicates each, with one chicken per replicate per cage, and all were fed with the same diet. Four experimental groups were orally administered 0, 200, 300 or 400 µl carvacrol essential oils at 18:00 hr every day during the 2-week experimental period. As a result of which, the gene expression of the occludin, claudin-1, claudin-5, ZO-1 and ZO-2 in intestinal mucosa of small intestine (p < 0.05) and the goblet cell content in small intestine epithelium (p < 0.05) were significantly increased; test subjects with 300 or 400 µl carvacrol essential oils reduced the microbial counts of Salmonella spp. and Escherichia coli in the intestines (p < 0.05); Essential oils administration also significantly increased activity of the sucrase (p < 0.05) and lactase (p < 0.05) in intestinal mucosa. In conclusion, the carvacrol essential oils have positive effects on growth performance and intestinal barriers function of broilers; those effects may be related to the dosage, as administration of 300 or 400 µl was more effective than that of 200 µl.

A reliable and controllable graphene doping method compatible with current CMOS technology and the demonstration of its device applications.

The modulation of charge carrier concentration allows us to tune the Fermi level (E F) of graphene thanks to the low electronic density of states near the E F. The introduced metal oxide thin films as well as the modified transfer process can elaborately maneuver the amounts of charge carrier concentration in graphene. The self-encapsulation provides a solution to overcome the stability issues of metal oxide hole dopants. We have manipulated systematic graphene p-n junction structures for electronic or photonic application-compatible doping methods with current semiconducting process technology. We have demonstrated the anticipated transport properties on the designed heterojunction devices with non-destructive doping methods. This mitigates the device architecture limitation imposed in previously known doping methods. Furthermore, we employed E F-modulated graphene source/drain (S/D) electrodes in a low dimensional transition metal dichalcogenide field effect transistor (TMDFET). We have succeeded in fulfilling n-type, ambipolar, or p-type field effect transistors (FETs) by moving around only the graphene work function. Besides, the graphene/transition metal dichalcogenide (TMD) junction in either both p- and n-type transistor reveals linear voltage dependence with the enhanced contact resistance. We accomplished the complete conversion of p-/n-channel transistors with S/D tunable electrodes. The E F modulation using metal oxide facilitates graphene to access state-of-the-art complimentary-metal-oxide-semiconductor (CMOS) technology.

Integral imaging system using an adaptive lens array.

We produced an adaptive lens array composed of multiple flat lens arrays arranged in a curved shape with an adjustable radius of curvature, in order to overcome the hardware problem of the conventional flat or curved lens array-based systems. The manufactured adaptive lens array is applied to an integral imaging system. The gap mismatch that occurs when using a curved lens array is resolved by computing the exact display mapping position of element images through each lens. The results of the experiment demonstrate that the adaptive lens array-based integral imaging system successfully generated elemental images according to the curvature transformation of the adaptive lens array, and they were reconstructed as 3D images.

Multi-Stress Monitoring System with Fiber-Optic Mandrels and Fiber Bragg Grating Sensors in a Sagnac Loop.

Fiber Bragg grating sensors are placed in a fiber-optic Sagnac loop to combine the grating temperature sensors and the fiber-optic mandrel acoustic emission sensors in single optical circuit. A wavelength-scanning fiber-optic laser is used as a common light source for both sensors. A fiber-optic attenuator is placed at a specific position in the Sagnac loop in order to separate buried Bragg wavelengths from the Sagnac interferometer output. The Bragg wavelength shifts are measured with scanning band-pass filter demodulation and the mandrel output is analyzed by applying a fast Fourier transform to the interference signal. This hybrid-scheme could greatly reduce the size and the complexity of optical circuitry and signal processing unit, making it suitable for low cost multi-stress monitoring of large scale power systems.

In-Situ Cure Monitoring of Wind Turbine Blades by Using Fiber Bragg Grating Sensors and Fresnel Reflection Measurement.

A fiber-optic cure monitoring system is proposed to measure curing status of composite structure such as a large scale wind turbine blade. The monitoring is based on the measurement of Fresnel reflectivity at the optical fiber/epoxy resin interface. The refractive index of epoxy resin varies throughout curing stages, changing the Fresnel reflectivity. The curing status is decided by monitoring the reflected intensity variation. The usage of fiber Bragg grating (FBG) sensor helps to separate the temperature-induced cross effects. A Gaussian curve fitting algorithm was applied to FBG spectra which were distorted in curing procedure. The substantial measurement errors could be minimized by locating the centroids of the Gaussian curve-fitted spectra. From the experiments performed in various isothermal conditions, the proposed system successfully identified the onset of gelation and the completion of curing of epoxy resins.

A learning curve in aortic dissection surgery with the use of cumulative sum analysis.

This study demonstrates the risk adjusted cumulative sum analysis of an individual surgical learning curve for acute type A aortic dissection surgery. Thirty consecutive patients were operated by a single surgeon for acute type A aortic dissection from April 2001 to March 2008. Operative variables, mortality, and major morbidities were analyzed. The learning curve was calculated by cumulative sum analysis. The anticipated 30-day operative mortality rate was 20.2 +/- 12.7% (range, 3.3-56.7%) and the expected 30-day mortality and morbidity rate was 47.0 +/- 13.3% (range, 21.7-70.6%) according to the Japan SCORE calculator. The observed operative and in-hospital mortality rate was 6.67% (two patients), and the observed major postoperative morbidity rate was 10.0% (three patients). Risk-adjusted cumulative sum analysis revealed that no excess deaths occurred beginning at the seventh case and thereafter. The surgeries for acute type A aortic dissection could be performed at the professionally permissive level from the beginning. Risk-adjusted cumulative sum analysis was a useful tool to monitor the performance of the surgical procedure.

Risk-adjusted mortality rate cumulative sum analysis based on the Japan SCORE represents a learning curve in mitral valve reparative surgery.

PURPOSE: We calculated the cumulative sum analysis of an individual surgical learning curve for mitral valve reconstructive surgery to monitor quality control. METHODS: Between April 2003 and March 2009, 25 consecutive patients underwent mitral valve reconstructive surgery for mitral regurgitation (MR). All operations were performed by a single surgeon. We analyzed the operative variables, mortality, and major morbidities and calculated the learning curve, using descriptive statistics and cumulative sum analysis based on the Japan SCORE calculator. RESULTS: In this series, the Japan SCORE calculator predicted a 30-day operative mortality rate of 3.07 ± 3.48 % and a 30-day operative mortality and morbidity rate of 14.9 ± 9.58 %s. In reality, there was no operative or in-hospital death and the major postoperative morbidity rate was 6.0 % (two patients). The risk-adjusted cumulative sum analysis revealed that the learning curve for mortality and morbidity shifted downward below the lower confident interval for all the patients, on completion of mitral valve repair. Coefficient analysis revealed a significant negative correlation between the aortic cross-clamp time and the cardiopulmonary time and case load. There was no correlation between the operation time and the case load. CONCLUSIONS: Routine reconstructive mitral valve surgery for MR can be performed at the professionally permissive level from the beginning, even in low-volume case loads.

A self-referencing intensity-based fiber optic sensor with multipoint sensing characteristics.

A self-referencing, intensity-based fiber optic sensor (FOS) is proposed and demonstrated. The theoretical analysis for the proposed design is given, and the validity of the theoretical analysis is confirmed via experiments. We define the measurement parameter, X, and the calibration factor, ß, to find the transfer function, , of the intensity-based FOS head. The self-referencing and multipoint sensing characteristics of the proposed system are validated by showing the measured and relative error versus the optical power attenuation of the sensor head for four cases: optical source fluctuation, various remote sensing point distances, fiber Bragg gratings (FBGs) with different characteristics, and multiple sensor heads with cascade and/or parallel forms. The power-budget analysis and limitations of the measurement rates are discussed, and the measurement results of fiber-reinforced plastic (FRP) coupon strain using the proposed FOS are given as an actual measurement. The proposed FOS has several benefits, including a self-referencing characteristic, the flexibility to determine FBGs, and a simple structure in terms of the number of devices and measuring procedure.

Dynamic Mode Decomposition for Transient Cavitation Bubbles Imaging in Pulsed High-Intensity Focused Ultrasound Therapy.

Pulsed high-intensity focused ultrasound (pHIFU) can induce sparse de novo inertial cavitation without the introduction of exogenous contrast agents, promoting mild mechanical disruption in targeted tissue. Because the bubbles are small and rapidly dissolve after each HIFU pulse, mapping transient bubbles and obtaining real-time quantitative metrics correlated with tissue damage are challenging. Prior work introduced Bubble Doppler, an ultrafast power Doppler imaging method as a sensitive means to map cavitation bubbles. The main limitation of that method was its reliance on conventional wall filters used in Doppler imaging and its optimization for imaging blood flow rather than transient scatterers. This study explores Bubble Doppler enhancement using dynamic mode decomposition (DMD) of a matrix created from a Doppler ensemble for mapping and extracting the characteristics of transient cavitation bubbles. DMD was first tested in silico with a numerical dataset mimicking the spatiotemporal characteristics of backscattered signal from tissue and bubbles. The performance of DMD filter was compared to other widely used Doppler wall filter-singular value decomposition (SVD) and infinite impulse response (IIR) high-pass filter. DMD was then applied to an ex vivo tissue dataset where each HIFU pulse was immediately followed by a plane wave Doppler ensemble. In silico DMD outperformed SVD and IIR high-pass filter and ex vivo provided physically interpretable images of the modes associated with bubbles and their corresponding temporal decay rates. These DMD modes can be trackable over the duration of pHIFU treatment using k-means clustering method, resulting in quantitative indicators of treatment progression.

Dynamic Mode Decomposition for Transient Cavitation Bubbles Imaging in Pulsed High Intensity Focused Ultrasound Therapy.

Pulsed high-intensity focused ultrasound (pHIFU) can induce sparse de novo inertial cavitation without the introduction of exogenous contrast agents, promoting mild mechanical disruption in targeted tissue. Because the bubbles are small and rapidly dissolve after each HIFU pulse, mapping transient bubbles and obtaining real-time quantitative metrics correlated to tissue damage are challenging. Prior work introduced Bubble Doppler, an ultrafast power Doppler imaging method as a sensitive means to map cavitation bubbles. The main limitation of that method was its reliance on conventional wall filters used in Doppler imaging and optimized for imaging blood flow rather than transient scatterers. This study explores Bubble Doppler enhancement using dynamic mode decomposition (DMD) of a matrix created from a Doppler ensemble for mapping and extracting the characteristics of transient cavitation bubbles. DMD was first tested in silico with a numerical dataset mimicking the spatiotemporal characteristics of backscattered signal from tissue and bubbles. The performance of DMD filter was compared to other widely used Doppler wall filters - singular value decomposition (SVD) and infinite impulse response (IIR) highpass filter. DMD was then applied to an ex vivo tissue dataset where each HIFU pulse was immediately followed by a plane wave Doppler ensemble. In silico DMD outperformed SVD and IIR high pass filter and ex vivo provided physically interpretable images of the modes associated with bubbles and their corresponding temporal decay rates. These DMD modes can be trackable over the duration of pHIFU treatment using k-means clustering method, resulting in quantitative indicators of treatment progression.

Histology-based quantification of boiling histotripsy outcomes via ResNet-18 network: Towards mechanical dose metrics.

This work was focused on the newly developed ultrasonic approach for non-invasive surgery - boiling histotripsy (BH) - recently proposed for mechanical ablation of tissues using pulsed high intensity focused ultrasound (HIFU). The BH lesion is known to depend in size and shape on exposure parameters and mechanical properties, structure and composition of tissue being treated. The aim of this work was to advance the concept of BH dose by investigating quantitative relationships between the parameters of the lesion, pulsing protocols, and targeted tissue properties. A HIFU focus of a 1.5 MHz 256-element array driven by power-enhanced Verasonics system was electronically steered along the grid within 12 × 4 × 12 mm volume to produce volumetric lesions in porcine liver (soft, with abundant collagenous structures) and bovine myocardium (stiff, homogenous cellular) ex vivo tissues with various pulsing protocols (1-10 ms pulses, 1-15 pulses per point). Quantification of the lesion size and completeness was performed through serial histological sectioning, and a computer vision approach using a combination of manual and automated detection of fully fractionated and residual tissue based on neural network ResNet-18 was developed. Histological sample fixation led to underestimation of BH ablation rate compared to the ultrasound-based estimations, and provided similar qualitative feedback as did gross inspection. This suggests that gross observation may be sufficient for qualitatively evaluating the BH treatment completeness. BH efficiency in liver tissue was shown to be insensitive to the changes in pulsing protocol within the tested parameter range, whereas in bovine myocardium the efficiency increased with either increasing pulse length or number of pulses per point or both. The results imply that one universal mechanical dose metric applicable to an arbitrary tissue type is unlikely to be established. The dose metric as a product of the BH pulse duration and the number of pulses per sonication point (BHD1) was shown to be more relevant for initial planning of fractionation of collagenous tissues. The dose metric as a number of pulses per point (BHD2) is more suitable for the treatment planning of softer targets primarily containing cellular tissue, allowing for significant acceleration of treatment using shorter pulses.

Determination of optimal energy system and level for growing pigs.

This study mainly evaluated the responses in growth performance of growing pigs to different energy systems and energy levels in diets. Subsequently, we compared the nutrient digestibility and digestible nutrient concentrations of each energy level diet. In experiment 1, a total of 144 growing pigs with an average initial body weight (BW) of 26.69 ± 7.39 kg were randomly allotted to six dietary treatments (four pigs/pen; six replicates/treatment) according to a 2 × 3 factorial arrangement resulting from two energy systems (metabolizable energy [ME] and net energy [NE]) and three energy levels (low [LE], recommended [C], and high energy [HE]). Pigs were fed the experimental diets for 6 weeks and were allowed free access to feed and water during the experimental period. In experiment 2, 12 growing pigs with an average initial BW of 27.0 ± 1.8 kg were randomly allotted to individual metabolism crates and fed the six diets in a replicated 6 × 6 Latin square design. The six dietary treatments were identical to those used in the growth trial. Pigs were fed their respective diets at 2.5 times the estimated energy requirement for maintenance per day, and this was divided into two equal meals provided twice per day during the experimental period. Differences in energy systems and energy levels had no significant effect on the growth performance or nutrient digestibility (except acid-hydrolyzed ether extract [AEE]) of growing pigs in the current study. However, the digestible concentrations of ether extract, AEE, and acid detergent fiber (g/kg dry matter [DM]) in diets significantly increased (p < 0.05) with increasing energy levels. Additionally, there was a tendency (p = 0.09) for an increase in the digestible crude protein content (g/kg DM) as the energy content of the diet increased. Consequently, differences in energy systems and levels did not affect the BW, average daily gain, and average daily feed intake of growing pigs. This implies that a higher variation in dietary energy levels may be required to significantly affect growth performance and nutrient digestibility when considering digestible nutrient concentrations.

Change in the Gut Microbiota of Lactating Sows and Their Piglets by Inclusion of Dietary Spray-Dried Plasma in Sow Diets.

This study aimed to investigate the effects of dietary spray-dried plasma (SDP) on the gut microbiota of lactating sows and their piglets. A total of 12 sows were randomly assigned to one of two dietary treatment groups in a completely randomized design. The treatments were a sow diet based on corn and soybean meal (CON), and a CON diet with an added 1% SDP. The sows were fed the dietary treatments from d 30 before farrowing to weaning (d 28). The fecal samples of three sows from each treatment and two of their randomly selected piglets were collected to verify their fecal microbiota. There were no differences in the alpha diversity and distinct clustering of the microbial communities in the sows and their piglets when SDP was added to the sow diets from late gestation to weaning. The fecal microbiota of the lactating sows and their piglets showed a higher relative abundance of the phylum Bacteroidota and genus Lactobacillus and Ruminococcus and showed a lower relative abundance of the phylum Bacillota and genus Bacteroides, Escherichia/Shigella, and Clostridium in the sows fed the SDP diet than those fed the CON diet. Overall, these results show that the addition of SDP to the sow diet during lactation altered the gut environment with positive microbial composition changes. These results were similar in the nursing piglets, suggesting that the control of the sow diets during lactation may contribute to the intestinal health and growth in piglets after weaning.

Dietary L-Methionine modulates the gut microbiota and improves the expression of tight junctions in an in vitro model of the chicken gastrointestinal tract.

BACKGROUND: The poultry industry encounters a number of factors that affect growth performance and productivity; nutrition is essential for sustaining physiological status and protecting against stressors such as heat, density, and disease. The addition of vitamins, minerals, and amino acids to the diet can help restore productivity and support the body's defense mechanisms against stress. Methionine (Met) is indispensable for poultry's energy metabolism, physiology, performance, and feed utilization capacity. Through this study, we aimed to examine the physiological effects of methionine supplementation on poultry as well as alterations of intestinal microbiome. METHODS: We utilized the DL- and L- form of methionine on Caenorhabditis elegans and the FIMM (Fermentor for intestine microbiota model) in-vitro digesting system. A genomic-analysis of the transcriptome confirmed that methionine supplementation can modulate growth-related physiological metabolic pathways and immune responses in the host poultry. The C. elegans model was used to assess the general health benefits of a methionine supplement for the host. RESULTS: Regardless of the type or concentration of methionine, supplementation with methionine significantly increased the lifespan of C. elegans. Feed grade L-Methionine 95%, exhibited the highest lifespan performance in C. elegans. Methionine supplementation increased the expression of tight junction genes in the primary intestinal cells of both broiler and laying hens, which is directly related to immunity. Feed grade L-Methionine 95% performed similarly or even better than DL-Methionine or L-Methionine treatments with upper doses in terms of enhancing intestinal integrity. In vitro microbial cultures of healthy broilers and laying hens fed methionine revealed changes in intestinal microflora, including increased Clostridium, Bacteroides, and Oscillospira compositions. When laying hens were given feed grade L-Methionine 95% and 100%, pathogenic Campylobacter at the genus level was decreased, while commensal bacteria were increased. CONCLUSIONS: Supplementation of feed grade L-Methionine, particularly L-Methionine 95%, was more beneficial to the host poultry than supplementing other source of methionine for maintaining intestinal integrity and healthy microbiome.

Urinary Metabolomic Differentiation of Infants Fed on Human Breastmilk and Formulated Milk.

Human breastmilk is an invaluable nutritional and pharmacological resource with a highly diverse metabolite profile, which can directly affect the metabolism of infants. Application of metabolomics can discriminate the complex relationship between such nutrients and infant health. As the most common biological fluid in metabolomic study, infant urinary metabolomics may provide the physiological impacts of different nutritional resources, namely human breastmilk and formulated milk. In this study, we aimed to identify possible differences in the urine metabolome of 30 infants (1-14 days after birth) fed with breast milk (n = 15) or formulated milk (n = 15). From metabolomic analysis with gas chromatography-mass spectrometry, 163 metabolites from single mass spectrometry (GC-MS), and 383 metabolites from tandem mass spectrometry (GC-MS/MS) were confirmed in urinary samples. Various multivariate statistical analysis were performed to discriminate the differences originating from physiological/nutritional variables, including human breastmilk/formulate milk feeding, sex, and duration of feeding. Both unsupervised and supervised discriminant analyses indicated that feeding resources (human breastmilk/formulated milk) gave marginal but significant differences in urinary metabolomes, while other factors (sex, duration of feeding) did not show notable discrimination between groups. According to the biomarker analyses, several organic acid and amino acids showed statistically significant differences between different feeding resources, such as 2-hydroxyhippurate.