Microscopic-Level Insights into P-O-Induced Strong Electronic Coupling Over Nickel Phosphide with Efficient Benzyl Alcohol Electrooxidation.

Electrooxidation of biomass into fine chemicals coupled with energy-saving hydrogen production for a zero-carbon economy holds great promise. Advanced anode catalysts determine the cell voltage and electrocatalytic efficiency greatly, further the rational design and optimization of their active site coordination remains a challenge. Herein, a phosphorus-oxygen terminals-rich species (Ni2 P-O-300) via an anion-assisted pyrolysis strategy is reported to induce strong electronic coupling and high valence state of active nickel sites over nickel phosphide. This ultimately facilitates the rapid yet in-situ formation of high-valence nickel with a high reaction activity under electrochemical conditions, and exhibits a low potential of 1.33 V vs. RHE at 10 mA cm-2 , exceeding most of reported transition metal-based catalysts. Advanced spectroscopy, theoretical calculations, and experiments reveal that the functional P-O species can induce the favorable local bonding configurations for electronic coupling, promoting the electron transfer from Ni to P and the adsorption of benzyl alcohol (BA). Finally, the hydrogen production efficiency and kinetic constant of BA electrooxidation by Ni2 P-O-300 are increased by 9- and 2.8- fold compared with the phosphorus-oxygen terminals-deficient catalysts (Ni2 P-O-500). This provides an anion-assisted pyrolysis strategy to modulate the electronic environment of the Ni site, enabling a guideline for Ni-based energy/catalysis systems.

Microscopic-Level Insights into Solvation Chemistry for Nonsolvating Diluents Enabling High-Voltage/Rate Aqueous Supercapacitors.

Localized "water-in-salt" (LWIS) electrolytes are promising candidates for the next generation of high-voltage aqueous electrolytes with low viscosity/salt beyond high-salt electrolytes. An effective yet high-function diluent mainly determines the properties of LWIS electrolytes, being a key issue. Herein, the donor number of solvents is identified to serve as a descriptor of interaction intensity between solvents and salts to screen the organic diluents having few impacts on the solvation microenvironment and intrinsic properties of the original high-salt electrolyte, further leading to the construction of a novel low-viscosity electrolyte with a low dosage of the LiNO3 salt and well-kept intrinsic Li+-NO3--H2O clusters. Nonsolvating diluents, especially acetonitrile (AN) that has never been reported previously, are presented with the capability of constructing a LWIS electrolyte with nonflammability, electrode-philic features, lower viscosity, decreased salt dosage, and a greatly enhanced ion diffusion coefficient by about 280 times. This strongly relies on a huge difference of about 5000 times in coordination and solubility between AN and H2O toward LiNO3 (0.05 vs 25 mol kgsolvent-1) and the moderate interaction between AN and H2O. Multi-spectroscopic techniques and molecular dynamics simulations uncover the solvation chemistry at the microscopic level and the interplay among cations, anions, and H2O without/with AN. The identified unique diluting and nonsolvating effects of AN reveal well-maintained cation-anion-H2O clusters and enhanced intermolecular hydrogen bonding between AN and H2O, further reinforcing the H2O stability and expanding the voltage window up to 3.28 V. This is a breakthrough that is far beyond high-viscosity/salt electrolytes for high-voltage and high-rate aqueous supercapacitors.

Role of excited-state hydrogen bonding in CO2 photoreduction catalyzed by sodium magnesium chlorophyll.

In this paper, we report a joint experimental and computational study to elaborate the mechanism for the photocatalytic CO2 reduction reaction (CO2RR). Experimental results indicate that the catalyst (sodium magnesium chlorophyll, MgChlNa2), which has a well-defined structure for calculation and understanding, can achieve the photoreduction of CO2 to CO only using water as a dispersant, without adding any photosensitizer or sacrificial agent. Subsequently, a series of structural models of the hydrogen-bonded complexes of the catalyst were constructed and outlined via utilizing density functional theory (DFT) calculations, including photophysical and photochemical processes. The results confirm that the rate-limiting step of the whole CO2RR was the intersystem crossing process. The electron and proton transfers involved in photophysical and photochemical processes are induced by hydrogen bonds in the excited states. The combination of experiments and calculations will provide an important reference for the design of high-efficiency photocatalysts in the photocatalytic CO2RR.

A Liquid-Liquid-Solid System to Manipulate the Cascade Reaction for Highly Selective Electrosynthesis of Aldehyde.

Electrocatalytic synthesis of aldehydes from alcohols exhibits unique superiorities as a promising technology, in which cascade reactions are involved. However, the cascade reactions are severely limited by the low selectivity resulting from the peroxidation of aldehydes in a traditional liquid-solid system. Herein, we report a novel liquid-liquid-solid system to regulate the selectivity of benzyl alcohol electrooxidation. The selectivity of benzaldehyde increases 200-fold from 0.4 % to 80.4 % compared with the liquid-solid system at a high current density of 136 mA cm-2 , which is the highest one up to date. In the tri-phase system, the benzaldehyde peroxidation is suppressed efficiently, with the conversion of benzaldehyde being decreased from 87.6 % to 3.8 %. The as-produced benzaldehyde can be in situ extracted to toluene phase and separated from the electrolyte to get purified benzaldehyde. This strategy provides an efficient way to efficiently enhance the selectivity of electrocatalytic cascade reactions.

Recognition of Water-Induced Effects toward Enhanced Interaction between Catalyst and Reactant in Alcohol Oxidation.

Pickering emulsion stabilized by solid nanoparticles provides a diverse solvent microenvironment and enables to promote the phase transfer of reaction substrates/products in catalytic reactions, but the intrinsic role of solvent is still not clear. Herein, using benzyl alcohol (BA) as a model reactant, we demonstrate the nature of the water-promoted activity for alcohol oxidation over the Pd/MgAl-LDO catalyst. Depending on the water in the solvent, we observe different reactivities regarding the proportion of the water in the system. Kinetic isotope effects confirm the participation and positive effects of water for oxidation of BA. The water promotion effects are recognized and identified by the water vapor pulse adsorption coupled with temperature program desorption. Moreover, the adsorption behavior of BA or benzaldehyde at the interface of water and Pd/MgAl-LDO is also investigated by quasi-in-situ Raman spectroscopy. In addition, the mechanism of water-promoted alcohol oxidation is rationally proposed based on the Langmuir-Hinshelwood mechanism. The general applicability of the water promotion effects is further demonstrated over different supports and substrates, which well achieves excellent catalytic activity and selectivity in Pickering emulsion compared to that in the pure toluene system.

An insight into the reaction mechanism of CO2 photoreduction catalyzed by atomically dispersed Fe atoms supported on graphitic carbon nitride.

We report a combination of experimental and computational mechanistic studies for the photoreduction of CO2 to CO with water, catalyzed by single-atom Fe supported on graphitic carbon nitride (g-C3N4). Density functional theory (DFT) and time-dependent DFT (TDDFT) methods were utilized to explore the behavior of single-atom Fe in g-C3N4, which is of vital importance to the understanding of the CO2 reduction reaction (CO2RR) mechanism. The calculation results reveal that the rate-limiting step of the hydrogen-bonded complex in the absence of Fe atoms is the cleavage of C-O bonds in COOH radicals during the whole CO2RR, which includes the photophysical and photochemical processes. The presence of Fe atoms not only activated CO2 in the ground state and increased the rate constant of the limiting step in the photophysical process, but also functioned as the catalytic active center, lowering the reaction barrier of the C-O bond cleavage in COOH˙ in the photochemical process and resulting in improved photocatalytic activity. In addition, DFT calculations further demonstrated that the electron and proton transfer involved in the photophysical and photochemical processes is closely related to and induced by the hydrogen bonds in the excited state.

A C-S-C Linkage-Triggered Ultrahigh Nitrogen-Doped Carbon and the Identification of Active Site in Triiodide Reduction.

An efficient chemical synthesis route, with an aim of reaching an ultrahigh nitrogen (N)-doping level in carbon materials can provide a platform where the type and amount of N dopant can be tuned over a wide range. We propose a C-S-C linkage-triggered confined-pyrolysis strategy for the high-efficiency in situ N-doping into carbon matrix and an ultrahigh doping level up to 13.5 at %, which is close to the theoretical upper limit (15.2 at %) is realized at a high carbonization temperature of 1000 °C. The pyridinic N is dominant with a maximum percent of 48.7 %. By using I3 - reduction as an example, the resultant NCM-5 exhibits the best activity with a power conversion efficiency of 8.77 %. A pyridinic N site-dependent activity is demonstrated in which the amount of active sites increases with the increase of pyridinic N, and the carbon atom adjacent to electron-withdrawing pyridinic N at the armchair edge acts as the most favorable site for the adsorption of I2 .

FeNi Alloy Nanoparticles Encapsulated in Carbon Shells Supported on N-Doped Graphene-Like Carbon as Efficient and Stable Bifunctional Oxygen Electrocatalysts.

The development of cost-effective and durable oxygen electrocatalysts remains highly critical but challenging for energy conversion and storage devices. Herein, a novel FeNi alloy nanoparticle core encapsulated in carbon shells supported on a N-enriched graphene-like carbon matrix (denoted as FeNi@C/NG) was constructed by facile pyrolyzing the mixture of metal salts, glucose, and dicyandiamide. The in situ pyrolysis of dicyandiamide in the presence of glucose plays a significant effect on the fabrication of the porous FeNi@C/NG with a high content of doped N and large specific surface area. The optimized FeNi@C/NG catalyst displays not only a superior catalytic performance for the oxygen reduction reaction (ORR, with an onset potential of 1.0 V and half-wave potential of 0.84 V) and oxygen evolution reaction (OER, the potential at 10 mA cm-2 is 1.66 V) simultaneously in alkaline, but also outstanding long-term cycling durability. The excellent bifunctional ORR/OER electrocatalytic performance is ascribed to the synergism of the carbon shell and FeNi alloy core together with the high-content of nitrogen doped on the large specific surface area graphene-like carbon.

Electrochemically Driven Coordination Tuning of FeOOH Integrated on Carbon Fiber Paper for Enhanced Oxygen Evolution.

Coordination tuning of catalysts is a highly effective strategy for activating and improving the intrinsic activity. Herein, a Co-engineered FeOOH catalyst integrated on carbon fiber paper (Co-FeOOH/CFP) is reported, which realized a great improvement of the oxygen evolution activity by tuning the coordination geometry of the Fe species with an electrochemically driven method. Experiments and theoretical calculation demonstrate that the FeO bonds of FeOOH are partially broken, which is rooted in the Co incorporation, thus resulting in unsaturated FeO6 ligand structures and a relatively narrow bandgap. Consequently, the reorganized Fe sites on the surface show an enhanced capability for adsorbing OH- species and the Co-FeOOH exhibits an improved conductivity. As expected, the Co-FeOOH/CFP hybrids exhibit an extremely low overpotential of ≈250 mV at 10 mA cm-2 and a small Tafel slope, which far outperforms that of electrochemically sluggish FeOOH. The present work emphasizes the importance of local Fe coordination in catalysis and provides an in-depth insight into the mechanism of the enhanced catalytic activity.

Solvothermal Syntheses and Characterizations of Four Quaternary Copper Sulfides BaCu3MS4 (M = In, Ga) and BaCu2MS4 (M = Sn, Ge).

Hydro(solvo)thermal syntheses of quaternary copper sulfides containing alkaline earth metal ions remain a great challenge because of the low solubility of Cu-S compounds. Herein, a new facile solvothermal method was developed, and four quaternary copper sulfides, i.e., BaCu3InS4 (1), BaCu3GaS4 (2), BaCu2SnS4 (3), and BaCu2GeS4 (4), were prepared using excess sulfur as a mineralizer. Compound 1 possesses a novel three-dimensional (3D) anionic [Cu3InS4]2- framework constructed by an 8-membered ring of [Cu4S4] and [Cu2In2S4] alternatively. Compound 2 features a unique 3D anionic [Cu3GaS4]2- framework composed of [Cu3GaS10]n14n- anionic chains and 8-membered rings, in which [Cu4S4] and [Cu2Ga2S4] reside alternatively. Compounds 3 and 4 feature 3D anionic [Cu2MS4]2- (M = Sn, Ge) frameworks composed of CuS4 and MS4 tetrahedra with Ba2+ located in the channels. It is worth noting that different 3D Cu-S frameworks exist in the title crystal structures, in which main group ions are incorporated. This paper provides a new synthetic strategy for new quaternary sulfides.

Phosphate Species up to 70% Mass Ratio for Enhanced Pseudocapacitive Properties.

The emerging phosphate species on the surface or near-surface of electrode materials are versatile and have an intriguing ability for dramatically enhanced electrochemical performance. Unfortunately, the distribution/dispersion of phosphate species still keeps at levels on the exterior not within the interior surface of materials, and the micro-/nanoscale tuning is commonly rarely concerned and its function remains poorly understood. Herein, for the first time, well-dispersed phosphate species up to 70% mass ratio implanted within Ni-doped CoP nanowire matrix are presented via an efficient low-temperature phosphorization strategy. The resultant nanohybrids possess kinetics-favorable open frameworks with abundant mesopores and a high degree covalency in the chemical bonds, thus leading to rapid mass transport/charge transfer and enhanced redox reaction kinetics. Remarkably, the phosphate species feature superwettability toward water and strong affinity for OH- in the electrolyte, evidenced by the shortened distance and reduced adsorption energy between the OH- and the nuclear Co atoms on the nanohybrids as revealed by density functional theory calculations. As such, the nanohybrids exhibit an ultrahigh specific capacity of 250 mAh g-1 even at 50 A g-1 . This work presents a deeper understanding of the dispersion and role of phosphate species for supercapacitors and other energy-related storage/conversion devices.

A 3D Covalent Organic Framework with Exceptionally High Iodine Capture Capability.

Using porous materials to cope with environmental issues is promising but remains a challenge especially for removing the radioactive vapor wastes in fission because of harsh adsorption conditions. Here we report a new, stable covalent organic framework (COF) as a porous platform for removing iodine vapor-a major radioactive fission waste. The three-dimensional COF consists of a diamond topology knotted by adamantane units, creates ordered one-dimensional pores and are highly porous. The COF enables the removal of iodine vapor via charge transfer complex formation with the pore walls to achieve exceptional capacity. Moreover, the 3D COF is "soft" to trigger structural fitting to iodine while retaining connectivity and enables cycle use for many times while retaining high uptake capacity. These results set a new benchmark for fission waste removal and suggest the great potential of COFs as a designable porous material for challenging world-threatening pollution issues.

Pseudohalogen-Based 2D Perovskite: A More Complex Thermal Degradation Mechanism Than 3D Perovskite.

(MA)2Pb(SCN)2I2, a new pseudohalogen-based 2D perovskite material, was reported as a very stable and promising photo-absorber in PSCs previously. However, the later researchers found that MA2Pb(SCN)2I2 was not as stable as claimed. Thus, it is very critical to clarify the controversy and reveal the degradation mechanism of MA2Pb(SCN)2I2. On the other hand, a large number of studies have indicated that adding a small amount of SCN- improves surface topography and crystallinity. However, whether SCN- ions can be incorporated into a 3D perovskite film remains debatable. In this work, the thermal degradation pathway of (MA)2Pb(SCN)2I2 is revealed by thermal gravimetric and differential thermal analysis coupled with quadrupole mass spectrometry and density functional theory calculations. The decomposition of (MA)2Pb(SCN)2I2 has been proved experimentally to be more complex than that of MAPbI3, involving four stages and multi-reactions from room temperature to above 500 °C. By combining the experimental results and theoretical calculations, it is found that 2D (MA)2Pb(SCN)2I2 actually is unstable when serving as photo-absorber in PSCs. Moreover, the role of SCN- in improving the crystallinity of 3D perovskite has also been discussed in detail.

Scrutinizing Defects and Defect Density of Selenium-Doped Graphene for High-Efficiency Triiodide Reduction in Dye-Sensitized Solar Cells.

Understanding the impact of the defects/defect density of electrocatalysts on the activity in the triiodide (I3- ) reduction reaction of dye-sensitized solar cells (DSSCs) is indispensable for the design and construction of high-efficiency counter electrodes (CEs). Active-site-enriched selenium-doped graphene (SeG) was crafted by ball-milling followed by high-temperature annealing to yield abundant edge sites and fully activated basal planes. The density of defects within SeG can be tuned by adjusting the annealing temperature. The sample synthesized at an annealing temperature of 900 °C exhibited a superior response to the I3- reduction with a high conversion efficiency of 8.42 %, outperforming the Pt reference (7.88 %). Improved stability is also observed. DFT calculations showed the high catalytic activity of SeG over pure graphene is a result of the reduced ionization energy owing to incorporation of Se species, facilitating electron transfer at the electrode-electrolyte interface.

Interaction between formaldehyde and luminescent MOF [Zn(NH2bdc)(bix)]n in the electronic excited state.

The hydrogen bond between formaldehyde and the luminescent metal-organic framework (MOF) [Zn(NH2bdc)(bix)]n was investigated using density functional theory and time-dependent density functional theory. The frontier molecular orbitals and electronic configuration demonstrate that the origin of the luminescence can be attributed to ligand-to-ligand charge transfer. Examination of the hydrogen bond behavior in the electronic excited state, with comparison of the electronic transition energies, bond distances, binding energy, (1)H-NMR chemical shifts, and infrared spectra with those of the ground state, demonstrate that the hydrogen bond is stronger when in the electronic excited state. Strengthening of the hydrogen bond weakens the radioactive transition of [Zn(NH2bdc)(bix)]n, which thus leads to a luminescence decrease or quenching phenomenon, meaning that the luminescent MOF [Zn(NH2bdc)(bix)]n may be applied to the detection of formaldehyde.

A Ferricyanide Anion-Philic Interface Induced by Boron Species within Carbon Framework for Efficient Charge Storage in Supercapacitors.

Carbon materials with hierarchical porous structures hold great potential for redox electrolyte-enhanced supercapacitors. However, restricted by the intrinsic inert and nonpolar characteristics of carbon, the energy barrier of anchoring redox electrolytes on the pore walls is relatively high. As such, the redox process at the interface less occurs, and the rate of mass transfer is impaired, further leading to a poor electrochemical performance. Here, a ferricyanide anion-philic interface made of in situ inserted boron species into carbon rings is constructed for enhanced charge storage in supercapacitors. Profiting from the unique component-driven effects, the polar anchoring sites on the pore wall can be built to grasp the charged redox ferricyanide anion from the bulk electrolyte and promote the redox process; the dynamics process is fastened correspondingly. Especially, the boron atoms in BC2O and BCO2 units with higher positive natural bond orbital values in the carbon skeleton are pinpointed as intrinsic active sites to bind the negatively charged nitrogen atoms in the ferricyanide anion via electrostatic interaction, confirmed by density functional theoretical calculations. This will suppress the shuttle and diffusion effects of the ferricyanide anion from the surface of the electrode to the bulk electrolyte. Finally, the well-designed PC-3 with high content of BC2O and BCO2 units can reach 1099 F g-1 at 2 mV s-1, which is a more than 2-fold increase over boron-free units of carbon (428 F g-1). The work offers a novel version for designing high-performance carbon materials with unique yet reaction species-philic effects.

A new proton conductive liquid with no ions: pseudo-protic ionic liquids.

Liquids with no ions! Raman analysis and quantum calculations suggest that electrically neutral molecular species predominantly exist in an N-methylimidazole and acetic acid equimolar mixture, and that ionic species are rather minor. Nevertheless, the mixture has significant ionic conductivity, and shows "good ionic" or "superionic" behavior (see figure). It may be suitable to call such liquids "pseudo-ionic liquids" rather than "ionic liquids".

Mismatching integration-enabled strains and defects engineering in LDH microstructure for high-rate and long-life charge storage.

Layered double hydroxides (LDH) have been extensively investigated for charge storage, however, their development is hampered by the sluggish reaction dynamics. Herein, triggered by mismatching integration of Mn sites, we configured wrinkled Mn/NiCo-LDH with strains and defects, where promoted mass & charge transport behaviors were realized. The well-tailored Mn/NiCo-LDH displays a capacity up to 518 C g-1 (1 A g-1), a remarkable rate performance (78%@100 A g-1) and a long cycle life (without capacity decay after 10,000 cycles). We clarified that the moderate electron transfer between the released Mn species and Co2+ serves as the pre-step, while the compressive strain induces structural deformation with promoted reaction dynamics. Theoretical and operando investigations further demonstrate that the Mn sites boost ion adsorption/transport and electron transfer, and the Mn-induced effect remains active after multiple charge/discharge processes. This contribution provides some insights for controllable structure design and modulation toward high-efficient energy storage.

Recyclable and Magnetically Functionalized Metal-Organic Framework Catalyst: IL/Fe3O4@HKUST-1 for the Cycloaddition Reaction of CO2 with Epoxides.

A recyclable and magnetic nanocomposite catalyst (IL/Fe3O4@HKUST-1) was synthesized via grafting ionic liquid (IL) [AEMIm]BF4 into magnetically functionalized metal-organic framework Fe3O4@HKUST-1 in a water-ethanol media. The properties of IL/Fe3O4@HKUST-1 were fully characterized by powder X-ray diffraction, electron microscopy, Fourier-transform infrared spectroscopy, nitrogen adsorption-desorption, density-functional theory, and a magnetic property measurement system. IL/Fe3O4@HKUST-1 showed high activity in the solvent-free cycloaddition of CO2 with epoxides under mild conditions. Furthermore, the catalyst can be easily separated from the reaction mixture, and the recycled catalyst maintained high performance for several cycles. The synergistic effect of the Lewis acid and base sites in IL/Fe3O4@HKUST-1 contributes to its greater reactivity than individual IL or HKUST-1.

The role of thermodynamically stable configuration in enhancing crystallographic diffraction quality of flexible MOFs.

Single-crystal X-ray diffraction (SCXRD) is a widely used method for structural characterization. Generally, low temperature is of great significance for improving the crystallographic diffraction quality. Herein we observe that this practice is not always effective for flexible metal-organic frameworks (f-MOFs). An abnormal crystallography, that is, more diffraction spots at a high angle and better resolution of diffraction data as the temperature increases in the f-MOF (1-g), is observed. XRD results reveal that 1-g has a reversible anisotropic thermal expansion behavior with a record-high c-axial positive expansion coefficient of 1,401.8 × 10-6 K-1. Calculation results indicate that the framework of 1-g has a more stable thermodynamic configuration as the temperature increases. Such configuration has lower-frequency vibration and may play a key role in promoting higher Bragg diffraction quality at room temperature. This work is of great significance for how to obtain high-quality SCXRD diffraction data.