Flexible and Stretchable Light-Emitting Diodes and Photodetectors for Human-Centric Optoelectronics.

Optoelectronic devices with unconventional form factors, such as flexible and stretchable light-emitting or photoresponsive devices, are core elements for the next-generation human-centric optoelectronics. For instance, these deformable devices can be utilized as closely fitted wearable sensors to acquire precise biosignals that are subsequently uploaded to the cloud for immediate examination and diagnosis, and also can be used for vision systems for human-interactive robotics. Their inception was propelled by breakthroughs in novel optoelectronic material technologies and device blueprinting methodologies, endowing flexibility and mechanical resilience to conventional rigid optoelectronic devices. This paper reviews the advancements in such soft optoelectronic device technologies, honing in on various materials, manufacturing techniques, and device design strategies. We will first highlight the general approaches for flexible and stretchable device fabrication, including the appropriate material selection for the substrate, electrodes, and insulation layers. We will then focus on the materials for flexible and stretchable light-emitting diodes, their device integration strategies, and representative application examples. Next, we will move on to the materials for flexible and stretchable photodetectors, highlighting the state-of-the-art materials and device fabrication methods, followed by their representative application examples. At the end, a brief summary will be given, and the potential challenges for further development of functional devices will be discussed as a conclusion.

A Wide Field-of-View Light-Field Camera with Adjustable Multiplicity for Practical Applications.

The long-fascinated idea of creating 3D images that depict depth information along with color and brightness has been realized with the advent of a light-field camera (LFC). Recently advanced LFCs mainly utilize micro-lens arrays (MLAs) as a key component to acquire rich 3D information, including depth, encoded color, reflectivity, refraction, occlusion, and transparency. The wide field-of-view (FOV) capability of LFCs, which is expected to be of great benefit for extended applications, is obstructed by the fundamental limitations of LFCs. Here, we present a practical strategy for the wide FOV-LFC by adjusting the spacing factor. Multiplicity (M) is the inverse magnification of the MLA located between the image plane and the sensor, which was introduced as the overlap ratio between the micro-images. M was adopted as a design parameter in several factors of the LFC, and a commercial lens with adjustable FOV was used as the main lens for practicality. The light-field (LF) information was evaluated by considering the pixel resolution and overlapping area in narrow and wide FOV. The M was optimized for narrow and wide FOV, respectively, by the trade-off relationship between pixel resolution and geometric resolution. Customized wide FOV-LFCs with different M were compared by spatial resolution test and depth information test, and the wide FOV-LFC with optimized M provides LF images with high accuracy.

Ultra-thin and near-unity selective emitter for efficient cooling.

For the efficient radiative cooling of objects, coolers should emit heat within atmospheric transparent window and block heat absorption from the surrounding environments. Thus, selective emitters enable highly efficient cooling via engineered photonic structures such as metamaterials and multi-stacking structures. However, these structures require sophisticated fabrication processes and large quantities of materials, which can restrict mass-production. This study introduces an ultra-thin (∼1 µm) and near-unity selective emitter (UNSE) within the atmospheric window, which can be fabricated using simple and affordable process. The combination of infrared (IR) lossy layers and high index lossless layer enhances the resonance in the structure thus, the emissivity in long wavelength IR region increases to near-unity within a thickness of ∼1 µm.

NFC-Based Wearable Optoelectronics Working with Smartphone Application for Untact Healthcare.

With growing interest in healthcare, wearable healthcare devices have been developed and researched. In particular, near-field communication (NFC) based wearable devices have been actively studied for device miniaturization. Herein, this article proposes a low-cost and convenient healthcare system, which can monitor heart rate and temperature using a wireless/battery-free sensor and the customized smartphone application. The authors designed and fabricated a customized healthcare device based on the NFC system, and developed a smartphone application for real-time data acquisition and processing. In order to achieve compact size without performance degradation, a dual-layered layout is applied to the device. The authors demonstrate that the device can operate as attached on various body sites such as wrist, fingertip, temple, and neck due to outstanding flexibility of device and adhesive strength between the device and the skin. In addition, the data processing flow and processing result are presented for offering heart rate and skin temperature. Therefore, this work provides an affordable and practical pathway for the popularization of wireless wearable healthcare system. Moreover, the proposed platform can easily delivery the measured health information to experts for contactless/personal health consultation.

Vitamin D Enhanced the Osteogenic Differentiation of Cell Spheroids Composed of Bone Marrow Stem Cells.

Background and Objectives: Vitamin D is a bone modulator widely used in regenerative medicine. This study aimed to analyze the effects of vitamin D on the osteogenic differentiation and mineralization of human mesenchymal stem cells. Materials and Methods: Spheroids were fabricated using human bone marrow-derived stem cells, and were cultured in the presence of vitamin D at concentrations of 0, 0.1, 1, 10, and 100 nM. Stem cell spheroids were fabricated and the morphological evaluation was conducted on days 1, 3, 7 and 14. Determination of qualitative cellular viability was performed with Live/Dead Kit assay on days 1 and 7. Quantitative cellular viability was evaluated with Cell Counting Kit-8 on days 1, 3, 7, and 14. To analyze the osteogenic differentiation of cell spheroids, alkaline phosphatase activity assays were performed with commercially available kit on days 7 and 14. Real-time polymerase chain reaction was used to determine the expression levels of RUNX2, BSP, OCN, and COL1A1 on days 7 and 14. Results: The stem cells produced well-formed spheroids, and addition of vitamin D did not result in any noticeable changes in the shape. The addition of vitamin D did not significantly change the diameter of the spheroids at 0, 0.1, 1, 10, or 100 nM concentrations. Quantitative cell viability results from days 1, 3, 7 and 14 showed no significant difference between groups (p > 0.05). There was significantly higher alkaline phosphatase activity in the 0.1 nM group when compared with the control group on day 14 (p < 0.05). Real-time polymerase chain reaction results demonstrated that the mRNA expression levels of RUNX2, OCN, and COL1A1 were significantly increased when vitamin D was added to the culture. Conclusions: Based on these findings, we concluded that vitamin D could be applied to the increased osteogenicity of stem cell spheroids.

NELL-1 Increased the Osteogenic Differentiation and mRNA Expression of Spheroids Composed of Stem Cells.

Background and objectives: NELL-1 is a competent growth factor and it reported to target cells committed to the osteochondral lineage. The secreted, osteoinductive glycoproteins are reported to rheostatically control skeletal ossification. This study was performed to determine the effects of NELL-1 on spheroid morphology and cell viability and the promotion of osteogenic differentiation of stem cell spheroids. Materials and Methods: Cultures of stem cell spheroids of gingiva-derived stem cells were grown in the presence of NELL-1 at concentrations of 1, 10, 100, and 500 ng/mL. Evaluations of cell morphology were performed using a microscope, and cell viability was assessed using a two-color assay and Cell Counting Kit-8. Evaluation of the activity of alkaline phosphatase and calcium deposition assays involved anthraquinone dye assay to determine the level of osteogenic differentiation of cell spheroids treated with NELL-1. Real-time quantitative polymerase chain reaction (qPCR) was used to evaluate the expressions of RUNX2, BSP, OCN, COL1A1, and ß-actin mRNAs. Results: The applied stem cells produced well-formed spheroids, and the addition of NELL-1 at tested concentrations did not show any apparent changes in spheroid shape. There were no significant changes in diameter with addition of NELL-1 at 0, 1, 10, 100, and 500 ng/mL concentrations. The quantitative cell viability results derived on Days 1, 3, and 7 did not show significant disparities among groups (p > 0.05). There was statistically higher alkaline phosphatase activity in the 10 ng/mL group compared with the unloaded control on Day 7 (p < 0.05). A significant increase in anthraquinone dye staining was observed with the addition of NELL-1, and the highest value was noted at 10 ng/mL (p < 0.05). qPCR results demonstrated that the mRNA expression levels of RUNX2 and BSP were significantly increased when NELL-1 was added to the culture. Conclusions: Based on these findings, we conclude that NELL-1 can be applied for increased osteogenic differentiation of stem cell spheroids.

Miniaturized 3D Depth Sensing-Based Smartphone Light Field Camera.

The miniaturization of 3D depth camera systems to reduce cost and power consumption is essential for their application in electrical devices that are trending toward smaller sizes (such as smartphones and unmanned aerial systems) and in other applications that cannot be realized via conventional approaches. Currently, equipment exists for a wide range of depth-sensing devices, including stereo vision, structured light, and time-of-flight. This paper reports on a miniaturized 3D depth camera based on a light field camera (LFC) configured with a single aperture and a micro-lens array (MLA). The single aperture and each micro-lens of the MLA serve as multi-camera systems for 3D surface imaging. To overcome the optical alignment challenge in the miniaturized LFC system, the MLA was designed to focus by attaching it to an image sensor. Theoretical analysis of the optical parameters was performed using optical simulation based on Monte Carlo ray tracing to find the valid optical parameters for miniaturized 3D camera systems. Moreover, we demonstrated multi-viewpoint image acquisition via a miniaturized 3D camera module integrated into a smartphone.

Large area fabrication of engineered microlens array with low sag height for light-field imaging.

Recently, intensive research on microlens array (MLA) was undertaken, which involved intertwining with the light-field imaging in order to obtain four-dimensional information. Although several fabrication approaches for MLA attempted to achieve high density and precision geometry, further progress is necessary. In this study, we present a cost-effective fabrication strategy for geometrically tunable polymer MLA with extremely low sag height (~3 µm) through improved MEMS wet etching process. Additionally, we assemble a hand-crafted light-field camera by integrating the elaborately customized MLA with a commercial digital camera. Finally, we demonstrate representative light-field imaging features including refocusing and all-in focusing image from a single exposure.

Digital cameras with designs inspired by the arthropod eye.

In arthropods, evolution has created a remarkably sophisticated class of imaging systems, with a wide-angle field of view, low aberrations, high acuity to motion and an infinite depth of field. A challenge in building digital cameras with the hemispherical, compound apposition layouts of arthropod eyes is that essential design requirements cannot be met with existing planar sensor technologies or conventional optics. Here we present materials, mechanics and integration schemes that afford scalable pathways to working, arthropod-inspired cameras with nearly full hemispherical shapes (about 160 degrees). Their surfaces are densely populated by imaging elements (artificial ommatidia), which are comparable in number (180) to those of the eyes of fire ants (Solenopsis fugax) and bark beetles (Hylastes nigrinus). The devices combine elastomeric compound optical elements with deformable arrays of thin silicon photodetectors into integrated sheets that can be elastically transformed from the planar geometries in which they are fabricated to hemispherical shapes for integration into apposition cameras. Our imaging results and quantitative ray-tracing-based simulations illustrate key features of operation. These general strategies seem to be applicable to other compound eye devices, such as those inspired by moths and lacewings (refracting superposition eyes), lobster and shrimp (reflecting superposition eyes), and houseflies (neural superposition eyes).

Design of Microdisk-Shaped Ge on Si Photodetector with Recess Structure for Refractive-Index Sensing.

In this paper, we introduce a disk-shaped Ge-on-Si photodetector for refractive-index difference sensing at an operating wavelength of 1550 nm. For the implementation of a small-scale sensor, a Ge layer was formed on top of a Si layer to increase the absorption coefficient at the expense of the light-detection area. Additionally, the sensor had a ring waveguide structure along the edge of the disk formed by a recess into the inner part of the disk. This increased the interaction between the dominant optical mode traveling along the edge waveguide and the refractive index of the cladding material to be sensed, and conclusively increased detection sensitivity. The simulation results show that the proposed sensor exhibited a detection sensitivity of >50 nm/RIU (Refractive Index Unit), a quality factor of approximately 3000, and a minimum detectable refractive index change of 0.95 × 10-2 RIU with a small disk radius of 3 µm. This corresponds to 1.67 times the sensitivity without a recess (>30 nm/RIU).

Effects of dietary supplementation of lipid-coated zinc oxide on intestinal mucosal morphology and expression of the genes associated with growth and immune function in weanling pigs.

OBJECTIVE: The present study was conducted to investigate the effects of a lipid-coated zinc oxide (ZnO) supplement Shield Zn (SZ) at the sub-pharmacological concentration on intestinal morphology and gene expression in weanling pigs, with an aim to gain insights into the mechanism of actions for SZ. METHODS: Forty 22-day-old weanling pigs were fed a nursery diet supplemented with 100 or 2,500 mg Zn/kg with uncoated ZnO (negative control [NC] or positive control [PC], respectively), 100, 200, or 400 mg Zn/kg with SZ for 14 days and their intestinal tissues were taken for histological and molecular biological examinations. The villus height (VH) and crypt depth (CD) of the intestinal mucosa were measured microscopically following preparation of the tissue specimen; expression of the genes associated with growth and immune function was determined using the real-time quantitative polymerase chain reaction. RESULTS: There was no difference in daily gain, gain:feed, and diarrhea score between the SZ group and either of NC and PC. The VH and VH:CD ratio were less for the SZ group vs NC in the jejunum and duodenum, respectively (p<0.05). The jejunal mucosal mRNA levels of insulin-like growth factor (IGF-I) and interleukin (IL)-10 regressed and tended to regress (p = 0.053) on the SZ concentration with a positive coefficient, respectively, whereas the IL-6 mRNA level regressed on the SZ concentration with a negative coefficient. The mRNA levels of IGF-I, zonula occludens protein-1, tumor necrosis factor-α, IL-6, and IL-10 did not differ between the SZ group and either of NC and PC; the occludin and transforming growth factor-ß1 mRNA levels were lower for the SZ group than for PC. CONCLUSION: The present results are interpreted to suggest that dietary ZnO provided by SZ may play a role in intestinal mucosal growth and immune function by modulating the expression of IGF-I, IL-6, and IL-10 genes.

Parametric Optimization of Lateral NIPIN Phototransistors for Flexible Image Sensors.

Curved image sensors, which are a key component in bio-inspired imaging systems, have been widely studied because they can improve an imaging system in various aspects such as low optical aberrations, small-form, and simple optics configuration. Many methods and materials to realize a curvilinear imager have been proposed to address the drawbacks of conventional imaging/optical systems. However, there have been few theoretical studies in terms of electronics on the use of a lateral photodetector as a flexible image sensor. In this paper, we demonstrate the applicability of a Si-based lateral phototransistor as the pixel of a high-efficiency curved photodetector by conducting various electrical simulations with technology computer aided design (TCAD). The single phototransistor is analyzed with different device parameters: the thickness of the active cell, doping concentration, and structure geometry. This work presents a method to improve the external quantum efficiency (EQE), linear dynamic range (LDR), and mechanical stability of the phototransistor. We also evaluated the dark current in a matrix form of phototransistors to estimate the feasibility of the device as a flexible image sensor. Moreover, we fabricated and demonstrated an array of phototransistors based on our study. The theoretical study and design guidelines of a lateral phototransistor create new opportunities in flexible image sensors.

Ferromagnetic, folded electrode composite as a soft interface to the skin for long-term electrophysiological recording.

This paper introduces a class of ferromagnetic, folded, soft composite material for skin-interfaced electrodes with releasable interfaces to stretchable, wireless electronic measurement systems. These electrodes establish intimate, adhesive contacts to the skin, in dimensionally stable formats compatible with multiple days of continuous operation, with several key advantages over conventional hydrogel based alternatives. The reported studies focus on aspects ranging from ferromagnetic and mechanical behavior of the materials systems, to electrical properties associated with their skin interface, to system-level integration for advanced electrophysiological monitoring applications. The work combines experimental measurement and theoretical modeling to establish the key design considerations. These concepts have potential uses across a diverse set of skin-integrated electronic technologies.

COMPU-EYE: a high resolution computational compound eye.

In nature, the compound eyes of arthropods have evolved towards a wide field of view (FOV), infinite depth of field and fast motion detection. However, compound eyes have inferior resolution when compared with the camera-type eyes of vertebrates, owing to inherent structural constraints such as the optical performance and the number of ommatidia. For resolution improvements, in this paper, we propose COMPUtational compound EYE (COMPU-EYE), a new design that increases acceptance angles and uses a modern digital signal processing (DSP) technique. We demonstrate that the proposed COMPU-EYE provides at least a four-fold improvement in resolution.

4 channel × 10 Gb/s bidirectional optical subassembly using silicon optical bench with precise passive optical alignment.

We demonstrate an advanced structure for optical interconnect consisting of 4 channel × 10 Gb/s bidirectional optical subassembly (BOSA) formed using silicon optical bench (SiOB) with tapered fiber guiding holes (TFGHs) for precise and passive optical alignment of vertical-cavity surface-emitting laser (VCSEL)-to-multi mode fiber (MMF) and MMF-to-photodiode (PD). The co-planar waveguide (CPW) transmission line (Tline) was formed on the backside of silicon substrate to reduce the insertion loss of electrical data signal. The 4 channel VCSEL and PD array are attached at the end of CPW Tline using a flip-chip bonder and solder pad. The 12-channel ribbon fiber is simply inserted into the TFGHs of SiOB and is passively aligned to the VCSEL and PD in which no additional coupling optics are required. The fabricated BOSA shows high coupling efficiency and good performance with the clearly open eye patterns and a very low bit error rate of less than 10-12 order at a data rate of 10 Gb/s with a PRBS pattern of 231-1.

Shape-controllable, bottom-up fabrication of microlens using oblique angle deposition.

This Letter reports a novel method for the simple fabrication of microlens arrays with a controlled shape and diameter on glass substrates. Multilayer stacks of silicon dioxide deposited by oblique angle deposition with hole mask patterns enable microlens formation. Precise control of mask height and distance, as well as oblique angle steps between deposited layers, supports the controllability of microlens geometry. The fabricated microlens arrays with designed geometry exhibit uniform optical properties.

Sub-1-Volt Electrically Programmable Optical Modulator Based on Active Tamm Plasmon.

Reconfigurable optical devices hold great promise for advancing high-density optical interconnects, photonic switching, and memory applications. While many optical modulators based on active materials have been demonstrated, it is challenging to achieve a high modulation depth with a low operation voltage in the near-infrared (NIR) range, which is a highly sought-after wavelength window for free-space communication and imaging applications. Here, electrically switchable Tamm plasmon coupled with poly(3,4-ethylenedioxythiophene):polystyrene sulfonate (PEDOT:PSS) is introduced. The device allows for a high modulation depth across the entire NIR range by fully absorbing incident light even under epsilon near zero conditions. Optical modulation exceeding 88% is achieved using a CMOS-compatible voltage of ±1 V. This modulation is facilitated by precise electrical control of the charge carrier density through an electrochemical doping/dedoping process. Additionally, the potential applications of the device are extended for a non-volatile multi-memory state optical device, capable of rewritable optical memory storage and exhibiting long-term potentiation/depression properties with neuromorphic behavior.

Inspiration from Visual Ecology for Advancing Multifunctional Robotic Vision Systems: Bio-inspired Electronic Eyes and Neuromorphic Image Sensors.

In robotics, particularly for autonomous navigation and human-robot collaboration, the significance of unconventional imaging techniques and efficient data processing capabilities is paramount. The unstructured environments encountered by robots, coupled with complex missions assigned to them, present numerous challenges necessitating diverse visual functionalities, and consequently, the development of multifunctional robotic vision systems has become indispensable. Meanwhile, rich diversity inherent in animal vision systems, honed over evolutionary epochs to meet their survival demands across varied habitats, serves as a profound source of inspirations. Here, recent advancements in multifunctional robotic vision systems drawing inspiration from natural ocular structures and their visual perception mechanisms are delineated. First, unique imaging functionalities of natural eyes across terrestrial, aerial, and aquatic habitats and visual signal processing mechanism of humans are explored. Then, designs and functionalities of bio-inspired electronic eyes are explored, engineered to mimic key components and underlying optical principles of natural eyes. Furthermore, neuromorphic image sensors are discussed, emulating functional properties of synapses, neurons, and retinas and thereby enhancing accuracy and efficiency of robotic vision tasks. Next, integration examples of electronic eyes with mobile robotic/biological systems are introduced. Finally, a forward-looking outlook on the development of bio-inspired electronic eyes and neuromorphic image sensors is provided.

Nanomaterial-Based Artificial Vision Systems: From Bioinspired Electronic Eyes to In-Sensor Processing Devices.

High-performance robotic vision empowers mobile and humanoid robots to detect and identify their surrounding objects efficiently, which enables them to cooperate with humans and assist human activities. For error-free execution of these robots' tasks, efficient imaging and data processing capabilities are essential, even under diverse and complex environments. However, conventional technologies fall short of meeting the high-standard requirements of robotic vision under such circumstances. Here, we discuss recent progress in artificial vision systems with high-performance imaging and data processing capabilities enabled by distinctive electrical, optical, and mechanical characteristics of nanomaterials surpassing the limitations of traditional silicon technologies. In particular, we focus on nanomaterial-based electronic eyes and in-sensor processing devices inspired by biological eyes and animal visual recognition systems, respectively. We provide perspectives on key nanomaterials, device components, and their functionalities, as well as explain the remaining challenges and future prospects of the artificial vision systems.

Switchable and conspicuous retroreflective sensors inspired by the wing scale of an emerald swallowtail.

Butterfly wings possess distinct micro/nanostructures that contribute to their vibrant coloration, light-trapping capabilities, and sensitivity to various stimuli. These complex features have inspired the creation of diverse devices and systems, such as sensors, photovoltaics, photocatalysis, and robotics. Specifically, the wing scales of the Emerald Swallowtail (Papilio palinurus) display iridescent, polarization-sensitive, and retroreflective colors due to their hierarchical structures. However, current technologies fail to mimic these natural designs fully, limiting their practical application in everyday life. In this study, we introduce a groundbreaking method for fabricating artificial wing scales that emulate the biological structure's functionality with a much simpler geometry. By integrating self-graded lossy media into metallic micro-concavity arrays, we achieve pronounced iridescent effects in both coaxial and non-coaxial arrangements, while preserving retroreflective properties. In particular, the simplified design allows for switchable color patterns based on the viewing angle. Demonstrating the concept, we successfully employ these conspicuous retroreflectors in hydrogen gas detection and the bi-directional/switchable recognition of patterned signals.