RESUMO
In recent years, metasurfaces have attracted considerable interest for their unprecedented capabilities to manipulate intensity, phase, and polarization of an electromagnetic wave. Although metasurface-based wavefront modulation has achieved numerous successful results, implementation of multifunctional devices in a single metasurface still meet significant challenges. Here, a novel multilayer structure is designed using properties of vanadium dioxide (VO2). Propagation phase and geometric phase are introduced in this structure to achieve multichannel holographic imaging in terahertz band. When the temperature is above 68°C, VO2 becomes a metal and it plays a role in wavefront modulation for terahertz wave. The left-handed channel realizes a hologram letter L and the right-handed channel realizes a hologram letter R. When the temperature is below 68°C, VO2 changes to an insulator, and electromagnetic wave is controlled by gold structures embedded inside a VO2 film. In this case, hologram number 2 is realized in the left-handed channel and hologram number 6 appears in the right-handed channel. Our structure has advantages of low crosstalk, multiple channels, and large bandwidth. This novel design paves a new road for multichannel imaging and information encryption.
RESUMO
Holography is an important topic in optical research. Metasurface holography has attracted increasing attention in recent years. However, it is still challenging to achieve dynamic tuning of holograms in the terahertz band. As an excellent phase change material, vanadium dioxide (VO2) is widely employed to dynamically manipulate electromagnetic waves. Here, VO2 meta-atoms are designed to manipulate phase and amplitude by changing the state of VO2 at 3.0 THz. These meta-atoms are composed of a VO2 block, silica spacer, and gold substrate. As the metallic VO2 is involved, 360° phase coverage is achieved by changing the dimension of VO2. The phase difference between the VO2 meta-atoms is approximately equal to 90°. Holograms are generated by aligning these meta-atoms. By combining convolution operations, holograms are deflected and reproduced. As the insulating VO2 is involved, the phase difference between the VO2 meta-atoms vanishes and the reflection amplitudes of the meta-atoms almost reach 100%. Using the phase transition of VO2, three types of metasurfaces are designed to manipulate holograms and they realize state switching of the hologram generator, state switching of hologram deflection, and state switching of the multi-beam hologram. Our work may find applications in optical holography and information privacy.
RESUMO
Due to the physically unrestricted set of orthogonally helical modes of orbital angular momentum (OAM), it has contributed significantly to wireless communication and information capacity. Meanwhile, focusing has important applications in fields such as super-resolution microscopic imaging and optical integration. Plasmonic metasurfaces have a powerful ability to modulate electromagnetic (EM) waves, and diversified functionalities in them are strongly desired. As of today, few plasmonic metasurfaces are reported which have multi-function in a single flat device. Herein, by fine-tuning the geometric dimensions and orientation angle of the meta-atom, the geometric phase is combined with the propagation phase to produce an independent phase response when left-handed circular polarization (LCP) and right-handed circular polarization (RCP) waves illuminate the metasurface. This paper presents three plasmonic metasurfaces, and each of them implements multiple functions on a single plasmonic metasurface. Firstly, normal reflection of OAM and a focused beam is achieved. Secondly, we realize anomalous reflection of OAM by convolving a gradient sequence and implement computational focusing at any point. Finally, addition theorem is adopted to implement the above two functions, and this design contains normal and inclined output beams. Our work provides novel approaches for the integration of multifunctional EM modulation.
RESUMO
Polarization is an important characteristic of electromagnetic wave. Due to novel optical properties, graphene-based anisotropic structure is widely used to control polarization state of electromagnetic wave. In this work, four graphene-based meta-atoms are designed to regulate polarization state of terahertz wave by changing Fermi energy level of graphene. When Fermi energy level is 0.01 eV, cross-polarized wave is emitted by four meta-atoms with phase difference of 90° at 1.18 THz, and the corresponding polarization conversion ratio reaches â¼90%. When Fermi energy level is adjusted to 0.70 eV, linear phase gradient will disappear, and cross-polarized wave almost disappears. Using four selected elements, three dynamic metasurfaces are designed for controlling wavefront of reflected beam, and they are gradient metasurface, metalens, and vortex beam generator. The designed metasurfaces successfully combine wavefront control and polarization manipulation, and greatly improve the ability to control electromagnetic wave. Our designs may have many potential applications, such as terahertz switching, imaging, and polarization beam splitter.
RESUMO
Based on the phase-transition property of vanadium dioxide (VO2), a terahertz bifunctional absorber is proposed with switchable functionalities of broadband absorption and multiband absorption. When VO2 is metal, the system is regarded as a broadband absorber, which is composed of VO2 patch, topas spacer, and VO2 film with metallic disks inserted. The system obtains a broadband absorption with absorptance >90% from 3.25 THz to 7.08 THz. Moreover, the designed broadband absorber has a stable performance within the incident angle range of 50°. When VO2 is dielectric, multiband absorption with six peaks is realized in the designed system. Graphene and the metallic disk-shaped array play the dominant role in the mechanism of multiband absorption. Through changing the Fermi energy level of graphene, the performance of multiband absorption can be dynamically adjusted. Because of the switchable functionalities, the proposed design may have potential application in the fields of intelligent absorption and terahertz switch.
RESUMO
As an emerging material, graphene has been widely applied in the field of active metasurface. Recently, researchers employed graphene to achieve dynamical control of electromagnetic wavefront. In this work, graphene-based reflective metasurface is presented to realize dynamical wavefront reconfiguration for terahertz wave. Using a hybrid structure of cross-shaped graphene and metal patch, the designed metasurface has 360° phase modulation capability. Its wavefront is reconfigurable and can realize multiple functions. In order to verify this, three examples are designed to demonstrate the phenomenon of wavefront reconstruction. They are gradient metasurface, vortex beam generator, and focusing mirror, respectively. First of all, Fermi level of graphene is used to reconstruct the reflected wavefront of gradient metasurface, and then realize switching between positive and negative reflections. Secondly, a vortex beam generator is implemented, and it can reconstruct the mode number of orbital angular momentum through Fermi level. Finally, a reflective lens is proposed and verified, whose focus can appear or disappear with the tuning of Fermi level. The proposed functions have potential applications in the fields of terahertz switching, communication, and focusing.
RESUMO
A bifunctional metamaterial is proposed based on a hybrid graphene and vanadium dioxide (VO2) configuration, which can realize a dynamic switch between beam steering and broadband absorption. The structure consists of a VO2 square, graphene patch, topas spacer, VO2 film, topas spacer, and metal substrate. When VO2 is in the metallic state, the structure serves as a coding metamaterial. By engineering different sizes of the top VO2 square and adjusting the Fermi energy level of graphene, the incident wave is scattered in different patterns. When VO2 is in the dielectric state, the structure serves as a broadband absorber. By changing the Fermi energy level of graphene from 0.0 eV to 0.9 eV, absorptance can be gradually changed and working bandwidth widens. There is an absorption band with near 100% absorptance from 0.9 THz to 1.35 THz when the Fermi energy level is 0.73 eV. And the designed broadband absorber is polarization-insensitive within the incident angle of 50°. Our work may show great potential in applications such as terahertz switching and modulation.
RESUMO
By introducing vanadium dioxide film into a multilayer structure, the dual functionalities of perfect absorption and high transmission are presented using the insulator-to-metal phase transition of vanadium dioxide. When vanadium dioxide is in the conducting state, the designed system acts as a narrowband absorber. The proposed absorber is composed of the top metallic ring, silica spacer, and the vanadium dioxide film. The absorption peak is originated from localized magnetic resonance between metallic ring and vanadium dioxide film. When vanadium dioxide is in the insulating state, the designed system acts as a transparent conducting metal. The top metallic ring, the middle dielectric spacer, and the subwavelength metallic mesh are combined together to form an antireflection coating. The influences of incident angle and structure parameter on absorption and transmission are also discussed. This work has demonstrated a new route for developing vanadium dioxide-based switchable photonic devices in the fields of filter and modulator at terahertz frequencies.
RESUMO
A terahertz bifunctional absorber is presented with broadband and narrowband absorbing properties in a graphene-spacer-vanadium dioxide-spacer-metal configuration. Carrier relaxation time of graphene τ = 1.0ps (τ = 0.1ps) is chosen for narrowband (broadband) absorption. When vanadium dioxide is in the conducting state, the design behaves as a narrowband absorber, and it is composed of a square-shaped graphene, topas spacer, and metallic vanadium dioxide film. There is an absorption band with 100% absorptance at the frequency of 1.37 THz. Narrowband absorption is caused by the localized magnetic resonance. When vanadium dioxide is in the insulating state, the design behaves as a broadband absorber composed of a square-shaped graphene, topas layer, vanadium dioxide film, and metal film. It has a broadband absorption in the frequency range of 1.05-2.35 THz, and the corresponding absorptance is more than 90%. The merging of two resonances with overlapping region ensures broadband performance of the designed absorber. The working bandwidth and intensity of narrowband absorption and broadband absorption can be dynamically adjusted by changing the Fermi energy level of graphene. The influences of structure parameters are discussed on absorption performance. In addition, the designed absorber is not sensitive to incident angle. Because of the simple structure, our design can be applied to many promising fields in intelligent absorption and terahertz switch.
RESUMO
We present the bifunctional design of a broadband absorber and a broadband polarization converter based on a switchable metasurface through the insulator-to-metal phase transition of vanadium dioxide. When vanadium dioxide is metal, the designed switchable metasurface behaves as a broadband absorber. This absorber is composed of a vanadium dioxide square, silica spacer, and vanadium dioxide film. Calculated results show that in the frequency range of 0.52-1.2 THz, the designed system can absorb more than 90% of the energy, and the bandwidth ratio is 79%. It is insensitive to polarization due to the symmetry, and can still work well even at large incident angles. When vanadium dioxide is an insulator, a terahertz polarizer is realized by a simple anisotropic metasurface. Numerical calculation shows that efficient conversion between two orthogonal linear polarizations can be achieved. Reflectance of a cross-polarized wave can reach 90% from 0.42 THz to 1.04 THz, and the corresponding bandwidth ratio is 85%. This cross-polarized converter has the advantages of wide angle, broad bandwidth, and high efficiency. So our design can realize bifunctionality of broadband absorption and polarization conversion between 0.52 THz and 1.04 THz. This architecture could provide one new way to develop switchable photonic devices and functional components in phase change materials.
RESUMO
A multilayer metamaterial with switchable functionalities is presented based on the phase-transition property of vanadium dioxide. When vanadium dioxide is in the metallic state, a broadband absorber is formed. Calculated results show that the combination of two absorption peaks enables absorptance more than 90% in the wide spectral range from 0.393 THz to 0.897 THz. Absorption performance is insensitive to polarization at the small incident angle and work well even at the larger incident angle. When vanadium dioxide is in the insulating state, the designed system behaves as a narrowband absorber at the frequency of 0.677 THz. This narrowband absorber shows the advantages of wide angle and polarization insensitivity due to the localized magnetic resonance. Furthermore, the influences of geometrical parameters on the performance of absorptance are discussed. The proposed switchable absorber can be used in various applications, such as selective heat emitter and solar photovoltaic field.
RESUMO
A switchable metamaterial with bifunctionality of absorption and electromagnetically induced transparency is proposed based on the phase-transition characteristic of phase change material-vanadium dioxide. When vanadium dioxide is in the metallic state, an isotropic narrow absorber is obtained in the terahertz region, which consists of a top metallic cross, a middle dielectric layer, and a bottom vanadium dioxide film. By adjusting structure parameters, perfect absorption is realized at the frequency of 0.498 THz. This designed narrow absorber is insensitive to polarization and incident angle. Absorptance can still reach 75% for transverse electric polarization and transverse magnetic polarization at the incident angle of 65∘. When vanadium dioxide is in the insulating state, the top metallic cross will interact with the bottom split ring resonator, and the interaction between them will lead to the appearance of electromagnetically induced transparency. The behavior of electromagnetically induced transparency works well for transverse electric polarization and transverse magnetic polarization at the small incident angle. The designed hybrid metamaterial opens possible avenues for achieving switchable functionalities in a single device.
RESUMO
We present a tunable metamodulator to work at terahertz frequencies by employing the dependency of toroidal dipolar resonance on the conductivity of vanadium dioxide. Numerical results show that toroidal dipolar resonance in the proposed planar structure can be observed around 0.288 THz in transmission spectrum. From the distribution of the anti-phase current flowing in the symmetric split ring resonator, the formation of toroidal dipole is validated. Our design may have potential applications in advanced terahertz devices, such as filter, plasmonic sensor, and fast switch.
RESUMO
An active absorption device is proposed based on vanadium dioxide metamaterials. By controlling the conductivity of vanadium dioxide, resonant absorbers are designed to work at wide range of terahertz frequencies. Numerical results show that a broadband terahertz absorber with nearly 100% absorptance can be achieved, and its normalized bandwidth of 90% absorptance is 60% under normal incidence for both transverse-electric and transverse-magnetic polarizations when the conductivity of vanadium dioxide is equal to 2000 Ω-1cm-1. Absorptance at peak frequencies can be continuously tuned from 30% to 100% by changing the conductivity from 10 Ω-1cm-1 to 2000 Ω-1cm-1. Absorptance spectra analysis shows a clear independence of polarization and incident angle. The presented results may have tunable spectral applications in sensor, detector, and thermophotovoltaic device working at terahertz frequency bands.
RESUMO
We proposed a novel planar terahertz (THz) plasmonic waveguide with folded stub arrays to achieve excellent terahertz propagation performance with tight field confinement and compact size based on the concept of spoof surface plasmon polaritons (spoof SPPs). It is found that the waveguide propagation characteristics can be directly manipulated by increasing the length of the folded stubs without increasing its lateral dimension, which exhibits much lower asymptotic frequency of the dispersion relation and even tighter terahertz field confinement than conventional plasmonic waveguides with rectangular stub arrays. Based on this waveguiding scheme, a terahertz concentrator with gradual step-length folded stubs is proposed to achieve high terahertz field enhancement, and an enhancement factor greater than 20 is demonstrated. This work offers a new perspective on very confined terahertz propagation and concentration, which may have promising potential applications in various integrated terahertz plasmonic circuits and devices, terahertz sensing and terahertz nonlinear optics.
RESUMO
We demonstrate that a broadband terahertz absorber with near-unity absorption can be realized using a net-shaped periodically sinusoidally-patterned graphene sheet, placed on a dielectric spacer supported on a metallic reflecting plate. Because of the gradient width modulation of the unit graphene sheet, continuous plasmon resonances can be excited, and therefore broadband terahertz absorption can be achieved. The results show that the absorber's normalized bandwidth of 90% terahertz absorbance is over 65% under normal incidence for both TE and TM polarizations when the graphene chemical potential is set as 0.7 eV. And the broadband absorption is insensitive to the incident angles and the polarizations. The peak absorbance remains more than 70% over a wide range of the incident angles up to 60° for both polarizations. Furthermore, this absorber also has the advantage of flexible tunability via electrostatic doping of graphene sheet, which peak absorbance can be continuously tuned from 14% to 100% by controlling the chemical potential from 0 eV to 0.8 eV. The design scheme is scalable to develop various graphene-based tunable broadband absorbers at other terahertz, infrared, and visible frequencies, which may have promising applications in sensing, detecting, and optoelectronic devices.
RESUMO
The independent excitation and tuning of double plasmonic waves are realized in a free-standing graphene-spacer-grating-spacer-graphene (GSGSG) hybrid slab, which consists of two graphene field effect transistors placed back-to-back to each other. Resulted from the high transparency and the tight confinement of surface plasmonic mode for the graphene, double plasmonic waves can be independently excited by guided-mode resonances (GMRs). Theoretical and numerical investigations are performed in the mid-infrared band. Furthermore, the tuning of individual GMR resonant wavelengths with respect to the system parameters is studied. The results provide opportunities to engineer the proposed hybrid slab for wavelength selective and multiplexing applications.
RESUMO
Here we show that a continuous highly conducting metal film can be made transparent for wide-angle and polarization-insensitive incidence of near-infrared light by depositing periodic metal patches on top of the metal film. Based on the optimized computations, the whole system could suppress the reflection and enhance the transmission. This design of transparent metal film can be useful in applications, such as optoelectronic electrodes, solar cells, and micro-electronic displays, where both high electrical conductivity and high optical transmittance are desirable.
RESUMO
We theoretically demonstrate a subwavelength spoof surface-plasmon-polariton (SPP) microcavity on a planar metallic surface working at the terahertz regime with a high-quality factor and ultra-small mode volume. The microcavity is based on plasmonic and metamaterial notions, and it consists of an easy-to-manufacture circular aperture and a bell-shaped metallic core. It is shown that such a structure can sustain SPP eigenmodes whose fields are tightly trapped within the microcavity. Using the proposed structure, a total Q factor of 1000 (including losses from metals at low temperatures) and subwavelength mode volume of 0.00018(λ/2)³ can be achieved in the THz range for the fundamental surface-plasmonic eigenmode at room temperature. Moreover, the key figures of merit such as resonance frequency can be flexibly tuned by modifying the geometry of the microcavity, making it attractive for broad applications in filters, light sources, energy storage, and on-chip optical communications.
RESUMO
We show that putting an ultra-thin anisotropic metamaterial layer on a plasmonic surface significantly enriches the surface wave (SW) characteristics of the system, which now supports SWs with transverse-magnetic (TM) and transverse-electric (TE) polarizations simultaneously. In addition, the generated SWs exhibit hybridized polarization characteristics in certain cases, and a SW band gap opens within a particular propagation direction range. We designed and fabricated a realistic structure based on the proposed model, and combined microwave experiments with full-wave simulations to verify the fascinating theoretical predictions. Several potential applications of the proposed system are discussed in the end.