Bioaccumulation, contamination and health risks of trace elements in wild fish in Chongqing City, China: a consumer guidance regarding fish size.

Trace elements generally contaminate wild fish, particularly in megacities, necessitating guided consumption practices. This study investigated the bioaccumulation of trace elements in wild fish from Chongqing City in June 2021. We evaluated their contamination and associated health risks to establish consumption guidance based on fish size. Our results indicate that the concentrations of Zn, Pb, Cr, and As were relatively high, with some fish exceeding the maximum residue limits. Herbivorous and pelagic fish generally exhibited lower bioaccumulation of most trace elements, except for Cr and As, which were higher in pelagic species. The contamination indices (Pi) for Cr, Pb and As were consistently above 0.2, indicating widespread contamination. The most contaminated fish typically measured around 19 cm in length and weighed approximately 90 g. Only the maximum target hazard quotients (THQ) for As, Cr, and Hg exceeded 1, with a notably high ratio of THQ(As) > 1, highlighting concerns over arsenic contamination. The THQ(As) remained below 1 for adults across all fish species, whereas for children, species such as Onychostoma sima, Pseudohemiculter dispar, and Parabramis pekinensis exceeded this threshold. Fish safe for adult consumption generally measured 13 cm in length and weighed 20 g, and for children, 16 cm and 25 g. Consequently, selecting larger fish is likely to reduce the consumption of contaminated fish, thereby decreasing health risks to the public. The centralization of contaminated fish with high risk in specific size range confirmed fish size could be used to gauge the contamination and health risk of fish.

Eruption and caries status of first permanent molars in children aged 6-7 years in Shijingshan District, Beijing, China.

BACKGROUND: Dental caries is still a major disease that affect the oral health of people in China. First permanent molars (FPMs) are the most caries-susceptible teeth among school-aged children. The aim of this study was to investigate the eruption and caries status of first permanent molars in children aged 6-7 years in Shijingshan District, Beijing, China, to provide information for oral health promotion. METHODS: The study was a cross-sectional survey conducted in 6-7-year-old first grade children from public elementary schools in Shijingshan District, Beijing. Participants were invited to receive a clinical oral examination. The eruption status and caries experience of FPMs were recorded. Questionnaires assessing children's sociodemographic information and oral health-related behaviors were completed by the children's parents or guardians. RESULTS: A total of 3,176 children, including 1,644 boys (51.8%) and 1,532 girls (48.2%) were included in the oral examination and questionnaire. Eruption status of FPMs was as follows: 37.5% fully erupted, 28.3% partially erupted, 34.2% not erupted. Girls had more erupted FPMs than boys (70.1% VS 61.8%, P < 0.001). The prevalence of dental caries in FPMs was 5.5% (174/3,176) in studied children. The mean decayed missing filled teeth score of FPMs was 0.11 and the mean decayed missing filled surface score of FPMs was 0.19. Binary Logistic regression analysis demonstrated that girls had more tooth decay than boys and father's educational background also associated with the caries experience of the studied children (P < 0.05). CONCLUSIONS: Around two-thirds of FPMs were fully erupted or partially erupted among children aged 6-7 years old in Shijingshan District, Beijing. Approximately 5% of the newly erupted FPM established dental caries. Effective intervention should be applied in this age group for oral health promotion.

Hydrogen Bond-Induced Flexible and Twisted Self-Assembly of Functionalized Carbon Dots with Customized-Color Circularly Polarized Luminescence.

Circularly polarized luminescence (CPL) has numerous applications in optical data storage, quantum computing, bioresponsive imaging, liquid crystal displays, and backlights in three-dimensional (3D) displays. In addition to their competitive optical properties, carbon dots (CDs) benefit from simple and low-cost preparation, facile post-modification, and excellent resistance to photo- and chemical bleaching after carbonization. Combining the superior optical performance with polarization peculiarities through hierarchical structure engineering is imperative for the development of CDs. In this study, hydrophobic interactions of aromatic ligands, which participate in the surface-ligand post-modification process on the ground-state chiral carbon core, are employed to drive the oriented assembly. Furthermore, the residual chiral amides on CDs form multiple hydrogen bonds during gradual aggregation, causing the assembled materials to form an asymmetric bending structure. Superficial ligands interfere with the optical dynamics of the exciton radiation transition and stabilize the excited state of the assembled materials to achieve a circularly polarized signal. The linkage ligands overcome the frequent aggregation-induced quenching phenomenon that present difficulties in conventional CDs, facilitate the assembly of self-supporting films, and improve chiral optical expression. The full-color and white CPL are manipulated by simply adjusting the functional groups of the ligands, which also illustrates the versatility of the post-modification strategy. Finally, large chiral flexible films and multicolor chiral light-emitting diodes based on the stable chiral powder phosphors were constructed, thereby providing feasible materials and technical support for flexible 3D displays.

Surface Modification Functionalized Carbon Dots.

Carbon dots (CDs) smaller than 10 nm constitute a new type of fluorescent carbon-based nanomaterial. They have attracted much attention owing to their unique structures and excellent photoelectric properties. Primitive CDs usually comprise carbon and oxygen and are synthesized in one step from various natural products or synthetic organic compounds, usually via microwave or hydrothermal methods. However, the uniformity of surface functional groups often make CDs lack the diversity of active sites required for specific applications. Therefore, the functionalization of CDs by specific groups is a powerful strategy for improving their photophysical and photochemical properties. This paper reviews surface modification strategies to overcome these shortcomings. Functionalizing CDs using covalent or non-covalent modification can give them unique properties and broaden their applicability.

Solid-state Fluorescence from Carbon Dots Widely Tunable from Blue to Deep Red through Surface Ligand Modulation.

Carbon dots (CDs) find widespread attention due to their remarkable fluorescent and electronic properties. However, aggregation-caused quenching currently limits the application of CDs in colored displays. The construction of CDs with color-tunable solid-state fluorescence (SSF) is rarely reported, since the preparation of SSF CDs is technically challenging. Herein, through surface ligand modulation, SSF CDs with an emission-color span of almost 300 nm (from blue to deep red) were obtained. In-depth structure-property studies reveal that intra- and inter-molecular hydrogen-bonding inside SSF CDs provokes the emission properties in the aggregated state. Photodynamic characterizations demonstrate emission wavelengths can be switched smoothly by deliberately altering conjugation ability between substituent ligands and CDs core. Three-dimensional printing patterning is used to create a range of emissive objects, demonstrating the commercial potential for use in optical lamps.

Long distance high resolution FMCW laser ranging with phase noise compensation and 2D signal processing.

A long distance high resolution frequency-modulated continuous wave (FMCW) laser rangefinder with phase noise compensation and two-dimensional (2D) data processing skills is developed. Range-finding ladar consists of a continuously chirped laser source, an auxiliary reference interferometer, and a monostatic optical transceiver for target illumination and return photon collection. To extend the range unambiguity and lower the electronic processing bandwidth, a two-step laser frequency chirping scheme is adopted, where a long pulse width, small frequency bandwidth laser chirping signal are used in step 1 for coarse distance estimation, and a short pulse width and large frequency bandwidth laser chirping signal are applied afterwards for step 2 high resolution distance realization. An auxiliary reference interferometer is to record the phase noise originated from the laser source to compensate for phase errors induced in the target return photons. The 2D data processing skill helps to coherently sum up all the phase noise removed echo photons to achieve high resolution range peak extraction with high detection sensitivity. Experimental demonstration shows that the proposed FMCW ladar at 1550 nm wavelength with a laser chirping bandwidth of 10 GHz and electronic processing bandwidth of 200 MHz can measure a corner cube test target in an outdoor atmospheric environment, and the measurement results are 12013.905 m with a 2.4 cm range resolution under strong return photon levels and 12013.920 m with a 2.5 cm range resolution under weak return photon levels.

A double jeopardy: COVID-19 impacts on the travel behavior and community living of people with disabilities.

The COVID-19 pandemic response has had a significant impact on the general population's ability to participate in their communities. Individuals with disabilities, an already socially disadvantaged population, are more vulnerable to and have likely been disproportionately impacted by COVID-19 response conditions. Yet, the extent to which the daily community living activities of people with disabilities have been impacted is unknown. Thus, this study assesses their travel behavior and community living during the COVID-19 pandemic conditions compared with those of the general population. A web survey was conducted using Qualtrics's online panel data (respondents included 161 people with any type of disability and 232 people without a disability). Regression models found that people with disabilities reduced their daily travel to a greater extent but at varying degrees, depending on the destination types and travel modes. Reductions in taxi rides (including ride-hailing services) were most significant among people with cognitive and sensory (e.g., vision and hearing) disabilities. By place type, cognitive disability was associated with a trip reduction for multiple destination types-grocery, restaurants, outdoor recreation, indoor recreation, and healthcare providers. Findings from this study could contribute to decision- and policy-making in planning, transportation, and community services during the remainder of the COVID-19 pandemic, in future major public health crises, and post-COVID, because the adjustments in travel behavior and community living might be longer-term.

Direct, Site-Selective and Redox-Neutral α-C-H Bond Functionalization of Tetrahydrofurans via Quantum Dots Photocatalysis.

As one of the most ubiquitous bulk reagents available, the intrinsic chemical inertness of tetrahydrofuran (THF) makes direct and site-selective C(sp3 )-H bond activation difficult, especially under redox neutral condition. Here, we demonstrate that semiconductor quantum dots (QDs) can activate α-C-H bond of THF via forming QDs/THF conjugates. Under visible light irradiation, the resultant alkoxyalkyl radical directly engages in radical cross-coupling with α-amino radical from amino C-H bonds or radical addition with alkene or phenylacetylene, respectively. In contrast to stoichiometric oxidant or hydrogen atom transfer reagents required in previous studies, the scalable benchtop approach can execute α-C-H bond activation of THF only by a QD photocatalyst under redox-neutral condition, thus providing a broad of value added chemicals starting from bulk THFs reagent.

Feature extraction algorithm of precession target based on image length and Doppler broadening.

In space defense, utilizing the micromotion features to distinguish real targets from interfering targets and decoys is effective. Due to the imaging of the high-speed precession target by microwave radar consisting of isolated scattering centers, there are many difficulties in using inverse synthetic aperture radar (ISAR) images for feature extraction. On the other hand, the inverse synthetic aperture ladar (ISAL) image is relatively continuous because of the short wavelength of laser, and the image sequence contains information about the variation in image length and Doppler width caused by target precession, which can be used for inverse motion parameters. By establishing an observation model of the precession target and performing image processing on the obtained ISAL image at different times, the image length sequence and Doppler width sequence can be obtained. Using the ellipse fitting method to process the obtained sequence, the precession parameters of the target can be obtained. The algorithm does not require prior information such as the radius and speed of the target motion, effectively improving the practicability of the algorithm. Finally, the effectiveness of the algorithm is verified by experimental results, and the error is controlled within 2%.

Single-frequency LADAR super-resolution Doppler tomography for extended targets.

Doppler tomography is an important means to obtain two-dimensional (2-D) images of remote targets. It is especially suitable for imaging spinning targets such as space debris, warheads, and aircraft blades. However, related research is mostly focused on the microwave band rather than the laser. Higher resolution can be achieved by implementing Doppler tomography in the laser band compared to the existing Doppler tomography in the microwave. Moreover, existing imaging methods are mostly directed at point targets. When these methods deal with extended target echoes, the image quality is unsatisfactory. These problems severely limit the application of Doppler tomography. Here, a novel laser Doppler tomography method has been proposed. The method is based on a single-frequency laser radar (LADAR) that does not require any form of wideband modulation of the transmitted signal. The imaging process is based on the precise relationship between the scattering coefficient of the target and the statistical characteristics of the Doppler spectrum and finds the maximum a posteriori (MAP) estimate of the scattering coefficient distribution. The imaging resolution depends on the Doppler frequency resolution, which exceeds the diffraction limit and is independent of the imaging distance. A laser Doppler tomography experimental system was established. With this system, high-quality laser Doppler tomograms of extended targets were obtained for the first time. In the experiment, the targets have different rotational speeds from 100 to 1000 r/min. The images of these targets with a resolution of 0.4 mm are obtained at a distance of 5 m indoors. In these images, the target details such as textures on the surfaces can be rendered. The quality of these images is greatly improved compared to existing processing methods. The experimental results confirm the effectiveness of the proposed laser Doppler tomography method.

Feature extraction algorithm of a precession target based on a Doppler frequency profile of dual-aspect observation.

In ballistic missile defense, using precession parameters is an effective way to determine warheads from decoys. Due to the geometric theory of diffraction, the backscattered field from a smooth object for a microwave radar consists of contributions from only isolated scattering centers. Further, thanks to the short wavelength of the laser, the ladar could obtain complete Doppler information of illuminated parts of precessing targets. On the basis of modeling the observation geometry of a rotating target with precession, a novel method for extracting precession parameters using coherent ladar based on a Doppler frequency profile (DFP) of dual-view observation is first proposed, to the best of our knowledge. By analyzing the periodic changes of bandwidth of a cone-shaped precessing object, we indicate that the sequence of DFP bandwidth can be approximate to a sinusoid function, based on which the precession period can be obtained through sinusoidal fitting. The precession angle can be obtained by combining dual-aspect receiving observation. A laboratory experiment verified the effectiveness of the proposed algorithm, and the errors of extracted parameters are about 10%.

Inverse synthetic aperture ladar autofocus imaging algorithm for micro-vibrating satellites based on two prominent points.

As an important imaging method for long-range satellite targets, inverse synthetic aperture ladar (ISAL) has the characteristics of high-resolution imaging and competitive detectability. Since the working wavelength of the ISAL is comparable to the micro-vibrations generated by mechanical moving components of satellites, which will cause image defocusing, motion compensation is of great significance. In this paper, an autofocus algorithm is proposed for estimating and compensating the phase error relating to both translational and rotational micro-vibrations. Comparing with non-parametric algorithms like phase gradient autofocus and parametric algorithms like contrast-based autofocus and entropy-based autofocus, the proposed one, which is based on two prominent points, is especially effective for the rotational phase error oscillating numbers of cycles. Simulations and experiments are conducted to validate the feasibility of the proposed algorithm.

Linear frequency-modulated continuous-wave ladar system for synthetic aperture imaging.

A novel and high-efficiency linear frequency-modulated continuous-wave (FMCW) ladar system for synthetic aperture imaging is proposed and experimentally demonstrated. This novel system generates wide-bandwidth linear FMCW ladar signals by employing an electro-optic LiNbO3- in-phase and quadrature modulator with an effective bias controller. The effectiveness of the proposed system is experimentally validated. Optical synthetic aperture images are obtained by using two 0.41 cm aperture diameter telescopes at the distance of 1 km. The resolution of these images can reach to 4 cm. A resolution improvement by about 10 times is achieved when compared with the conventional real aperture imaging system.

Recent Advances in and Challenges with Fe-Based Metallic Glasses for Catalytic Efficiency: Environment and Energy Fields.

Metallic glass is being gradually recognized for its unique disordered atomic configuration and excellent catalytic activity, so is of great significance in the field of catalysis. Recent reports have demonstrated that Fe-based metallic glass, as a competitive new catalyst, has good catalytic activity for the fields of environment and energy, including high catalytic efficiency and stability. This review introduces the latest developments in metallic glasses with various atomic components and their excellent catalytic properties as catalysts. In this article, the influence of Fe-based metallic glass catalysts on the catalytic activity of dye wastewater treatment and water-splitting is discussed. The catalytic performance in different atomic composition systems and different water environment systems, and the preparation parameters to improve the surface activity of catalysts, are reviewed. This review also describes several prospects in the future development and practical application of Fe-based metallic glass catalysts and provides a new reference for the synthesis of novel catalysts.

Electrospun fibers integrating enzyme-functionalized metal-organic frameworks for postoperative tumor recurrence inhibition and simultaneously wound tissue healing.

The tumor recurrence and infected wound tissue defect are the major clinical challenges after the surgical treatment of primary chest wall cancer. Herein, to address the above issues, blending electrospinning was applied to incorporate glucose oxidase (GOx) loaded Zn/Cu-based bimetallic zeolitic imidazolate frameworks (GOx/BMOFs) into polyurethane (PU) fibers, which were designed for effective cancer therapy with improved wound healing. The release of Cu2+ and GOx could accomplish the conversion from Cu2+ to Cu+ through the glutathione (GSH) depletion and provide additional H2O2 from glucose by GOx catalysis, respectively, which further underwent the Fenton-like reaction to produce toxic hydroxyl radical (OH). The tumor cells (human fibrosarcoma cells) could be effectively killed in vitro and in vivo through the synergistic chemodynamic therapy and starvation therapy. Moreover, the electrospun fiber platform could support the adhesion and proliferation of wound tissue cells, and also show the antibacterial ability owing to the functional agents in the fibers, thereby accelerating the infected wound repair in vivo. This work may offer a reliable and effective fiber biomaterial for localized chest wall tumor therapy and simultaneous tissue regeneration.

Role of Cr Element in Highly Dense Passivation of Fe-Based Amorphous Alloy.

The effect of the Cr element on the corrosion behavior of as-spun Fe72-xCrxB19.2Si4.8Nb4 ribbons with x = 0, 7.2, 21.6, and 36 in 3.5% NaCl solution were investigated in this work. The results show that the glass formability of the alloys can be increased as Cr content (cCr) is added up to 21.6 at.%. When cCr reaches 36 at.%, some nanocrystals appear in the as-spun ribbon. With increasing cCr content, the corrosion resistances of as-spun Fe-based ribbons are continually improved as well as their hardness properties; during the polarization test, their passive film shows an increase first and then a decrease, with the highest pitting potential as cCr = 7.2 at.%, which is confirmed by an XPS test. The dense passivation film, composed of Cr2O3 and [CrOx(OH)3-2x, nH2O], can reduce the number of corrosion pits on the sample surface due to chloride corrosion and possibly be deteriorated by the overdosed CrFeB phase. This work can help us to design and prepare the highly corrosion-resistant Fe-based alloys.

Ligand-Triggered Self-Assembly of Flexible Carbon Dot Nanoribbons for Optoelectronic Memristor Devices and Neuromorphic Computing.

Carbon dots (CDs) are widely utilized in sensing, energy storage, and catalysis due to their excellent optical, electrical and semiconducting properties. However, attempts to optimize their optoelectronic performance through high-order manipulation have met with little success to date. In this study, through efficient packing of individual CDs in two-dimensions, the synthesis of flexible CDs ribbons is demonstrated technically. Electron microscopies and molecular dynamics simulations, show the assembly of CDs into ribbons results from the tripartite balance of π-π attractions, hydrogen bonding, and halogen bonding forces provided by the superficial ligands. The obtained ribbons are flexible and show excellent stability against UV irradiation and heating. CDs ribbons offer outstanding performance as active layer material in transparent flexible memristors, with the developed devices providing excellent data storage, retention capabilities, and fast optoelectronic responses. A memristor device with a thickness of 8 µm shows good data retention capability even after 104 cycles of bending. Furthermore, the device functions effectively as a neuromorphic computing system with integrated storage and computation capabilities, with the response speed of the device being less than 5.5 ns. These properties create an optoelectronic memristor with rapid Chinese character learning capability. This work lays the foundation for wearable artificial intelligence.

Nanoscale Oxygenous Heterogeneity in FePC Glass for Highly Efficient and Reusable Catalytic Performance.

Metallic glass, with its unique disordered atomic structure and high density of low-coordination sites, is regarded as the most competitive new catalyst for environmental catalysis. However, the efficiency and stability of metallic glass catalysts are often affected by their atomic configuration. Thus, the design and regulation of the nanoscale structure of metallic glasses to improve their catalytic efficiency and stability remains a challenge. Herein, a non-noble component, Fe75 P15 C10 amorphous ribbon, is used as a precursor to fabricate a hierarchical gradient catalyst with nanoscale heterogeneous and oxygenous amorphous structure by simple annealing and acid-immersing. The resulting catalyst offers an ultrahigh catalytic ability of kSA• C0 = 3101 mg m-2  min-1 and excellent reusability of 39 times without efficiency decay in dye wastewater degradation. Theoretical calculations indicate that the excellent catalytic performance of the catalyst can be attributed to its unique heterogeneous nanoglass structure, which induces oxygen atoms. Compared to the FePC structure, the FeP/FePCO structure exhibits strong charge transferability, and the energy barrier of the rate-determining steps of the conversion of S2 O8 2- to SO4 -• is reduced from 2.52 to 0.97 eV. This study reveals that a heterogeneous nanoglass structure is a new strategy for obtaining high catalytic performance.

Antioxidant potential and in vitro inhibition of starch digestion of flavonoids from Crataegus pinnatifida.

Hawthorn flavonoids were extracted by enzymolysis associated ultrasonic procedure. Thirteen flavonoids were identified by HPLC/ESI-QTOF/MS, and the major components were procyanidin C1, rutin-rhamnoside, vitexin-rhamnoside, and catechin. Hawthorn flavonoids exhibited strong free radical scavenging activities against DPPH, ABTS, and hydroxyl radicals. Total and intercellular antioxidant experiments revealed that the free hydro-PSC value was 295.32 ± 12.20 µmol of VCE/g DW, and the free cellular antioxidant activity (CAA) values were 168.60 ± 4.87 µmol of QE/g DW in the no PBS wash protocol and 49.53 ± 1.75 µmol of QE/g DW in the PBS wash protocol. In addition, hawthorn flavonoids exhibited higher α-amylase and α-glucosidase inhibitory activities. The wheat starch digestibility was also reduced by hawthorn flavonoids as well. The results indicated that enzymolysis associated ultrasonic extraction was advisable for extracting flavonoids from hawthorn, and hawthorn flavonoids might be recommended as a potential food supplement with hypoglycemic activities.

Pectin oligosaccharides improved lipid metabolism in white adipose tissue of high-fat diet fed mice.

Impacts of pectin oligosaccharide (POS) got from hawthorn fruitage on adiponectin signaling pathway and white adipose metabolism in mice fed with high-fat control. The results showed that POS significantly inhibited the levels of inflammatory cytokines TNF-α and IL-6, and down-regulated expression of CD68. POS dramatically reduced gene expression contents of fatty acid composite concerning enzymes ACC and FAS, as well as TG synthesis-related enzymes SCD-1 and DGAT1 as compared to a high-fat group (HFC). POS dramatically increased expression levels of oxidation-related enzymes of fatty acid ACO, CPT-1, and TG deposition-related enzymes ATGL and HSL as contrast to the high-fat control group. In addition, POS activated adiponectin-mediated AdipoR1/AMPK/PPARα signaling path by upregulating expression levels of AdipoR1, AMPK and PPARα. The results demonstrated that POS can improve lipid metabolism of adipose tissue, and contribute to the creation of functional foods to prevent and treat lipid metabolism disorders. Supplementary Information: The online version contains supplementary material available at 10.1007/s10068-022-01109-9.