Spectroscopic insights into peri-implant mucositis and peri-implantitis: unveiling peri-implant crevicular fluid profiles using surface enhanced Raman scattering.

The precise identification and differentiation of peri-implant diseases, without the need for intrusive procedures, is crucial for the successful clinical treatment and overall durability of dental implants. This work introduces a novel approach that combines surface-enhanced Raman scattering (SERS) spectroscopy with advanced chemometrics to analyse peri-implant crevicular fluid (PICF) samples. The primary purpose is to offer an unbiased evaluation of implant health. A detailed investigation was performed on PICF samples obtained from a cohort of patients exhibiting different levels of peri-implant health, including those with healthy implants, implants impacted by peri-implantitis, and implants with peri-implant mucositis. The obtained SERS spectra were analysed using canonical-powered partial least squares (CPPLS) to identify unique chemical characteristics associated with each inflammatory state. Significantly, our research findings unveil the presence of a common inflammatory SERS spectral pattern in cases of peri-implantitis and peri-implant mucositis. Furthermore, the SERS-based scores obtained from CPPLS were combined with established clinical scores and subjected to a linear discriminant analysis (LDA) classifier. Repeated double cross-validation was used to validate the method's capacity to discriminate different implant conditions. The integrated approach showcased high sensitivity and specificity and an overall balanced accuracy of 92%, demonstrating its potential to serve as a non-invasive diagnostic tool for real-time implant monitoring and early detection of inflammatory conditions.

Inter and intra-operator reliability of Lekholm and Zarb classification and proposal of a novel radiomic data-driven clustering for qualitative assessment of edentulous alveolar ridges.

OBJECTIVES: The present study was conducted to evaluate the reproducibility of Lekholm and Zarb classification system (L&Z) for bone quality assessment of edentulous alveolar ridges and to investigate the potential of a data-driven approach for bone quality classification. MATERIALS AND METHODS: Twenty-six expert clinicians were asked to classify 110 CBCT cross-sections according to L&Z classification (T0). The same evaluation was repeated after one month with the images put in a different order (T1). Intra- and inter-examiner agreement analyses were performed using Cohen's kappa coefficient (CK) and Fleiss' kappa coefficient (FK), respectively. Additionally, radiomic features extraction was performed from 3D edentulous ridge blocks derived from the same 110 CBCTs, and unsupervised clustering using 3 different clustering methods was used to identify patterns in the obtained data. RESULTS: Intra-examiner agreement between T0 and T1 was weak (CK 0.515). Inter-examiner agreement at both time points was minimal (FK at T0: 0.273; FK at T1: 0.243). The three different unsupervised clustering methods based on radiomic features aggregated the 110 CBCTs in three groups in the same way. CONCLUSIONS: The results showed low agreement among clinicians when using L&Z classification, indicating that the system may not be as reliable as previously thought. The present study suggests the possible application of a reproducible data-driven approach based on radiomics for the classification of edentulous alveolar ridges, with potential implications for improving clinical outcomes. Further research is needed to determine the clinical significance of these findings and to develop more standardized and accurate methods for assessing bone quality of edentulous alveolar ridges.

IMPLANT SURVIVAL IN RENAL-TRANSPLANTED PATIENTS: A PROSPECTIVE LONG-TERM STUDY.

The present study aims to assess the feasibility of implant rehabilitation in kidney-transplanted patients. Patients with kidney transplantation included in periodontal supportive care and at least one year of dialysis with mono- or partial edentulism were eligible for this study. Histomorphometric evaluation of the harvested bone was matched with radiological bone assessment. Implant stability was also monitored with RFA and ITV. Fixed cemented prostheses have been delivered after conventional loading protocol. Supportive periodontal therapy has been administered. Eleven patients (9 males and 2 females) were included. The mean age was 58.1 ± 9.9 years. A total of 17 implants were inserted and analyzed. Mean ITV was 39.3 ± 23.8 Ncm. The mean primary stability (ISQ) at T0 was 71.7 ± 10.5, whereas the mean secondary stability at T1 was 73.0 ± 7.3. The minimum follow-up was 62 months, with a maximum of 84 months (7 years) reached by four patients. Fourteen out of 15 implants were in function at a 5-year follow-up (survival rate 93.3%). Two implants showed peri-implantitis. Seventeen bone samples were collected (13 in the mandible and 4 in the maxilla). The mean percentage of marrow spaces and lamellar bone was 41.6% and 58.4%, respectively. Class 3, according to Misch classification, was found as the mean value of radiological bone density. It can be concluded that implant-supported rehabilitation in kidney-transplanted patients is possible. Adequate periodontal maintenance allows implant rehabilitation in kidney transplanted patients with long-term sufficient survival rates.

Can radiomic features extracted from intra-oral radiographs predict physiological bone remodelling around dental implants? A hypothesis-generating study.

AIM: The rate of physiological bone remodelling (PBR) occurring after implant placement has been associated with the later onset of progressive bone loss and peri-implantitis, leading to medium- and long-term implant therapy failure. It is still questionable, however, whether PBR is associated with specific bone characteristics. The aim of this study was to assess whether radiomic analysis could reveal not readily appreciable bone features useful for the prediction of PBR. MATERIALS AND METHODS: Radiomic features were extracted from the radiographs taken at implant placement (T0) using LifeX software. Because of the multi-centre design of the source study, ComBat harmonization was applied to the cohort. Different machine-learning models were trained on selected radiomic features to develop and internally validate algorithms capable of predicting high PBR. In addition, results of the algorithm were included in a multivariate analysis with other clinical variables (tissue thickness and depth of implant position) to test their independent correlation with PBR. RESULTS: Specific radiomic features extracted at T0 are associated with higher PBR around tissue-level implants after 3 months of unsubmerged healing (T1). In addition, taking advantage of machine-learning methods, a naive Bayes model was trained using radiomic features selected by fast correlation-based filter (FCBF), which showed the best performance in the prediction of PBR (AUC = 0.751, sensitivity = 66.0%, specificity = 68.4%, positive predictive value = 73.3%, negative predictive value = 60.5%). In addition, results of the whole model were included in a multivariate analysis with tissue thickness and depth of implant position, which were still found to be independently associated with PBR (p-value < .01). CONCLUSION: The combination of radiomics and machine-learning methods seems to be a promising approach for the early prediction of PBR. Such an innovative approach could be also used for the study of not readily disclosed bone characteristics, thus helping to explain not fully understood clinical phenomena. Although promising, the performance of the radiomic model should be improved in terms of specificity and sensitivity by further studies in this field.

Is L-PRF an effective hemostatic agent in single tooth extractions? A cohort study on VKA and DOAC patients.

OBJECTIVES: The aim of this clinical observational study was to assess the efficacy of L-PRF as a hemostatic agent in patients under treatment with vitamin K antagonists (VKAs) or direct oral anticoagulants (DOACs). MATERIALS AND METHODS: Patients under oral anticoagulant therapy (VKA or DOACs) who needed a single simple tooth extraction were enrolled. L-PRF plug was positioned inside the alveolus and secured with non-absorbable sutures. Surgical time, pain-VAS, paracetamol intake, intra-operative, post-operative biological complications, and bleeding events have been registered. RESULTS: A total of 112 patients (59 patients for DOAC and 53 for VKA group) were enrolled. Post-operative bleeding was recorded in nine patients (17%) for VKA group and nine patients (15.3%) for DOACs group. None of the patients needed a medical support for managing of bleeding. Seven days after surgery, no cases of post-extractive complications occurred. CONCLUSIONS: The use of L-PRF resulted in limited mild late post-operative bleedings without the need of medical intervention. CLINICAL RELEVANCE: The use of L-PRF can be adopted for an uneventful post-operative curse in anticoagulated patients without chasing their therapy for single tooth extraction.

Influence of buccal and palatal bone thickness on post-surgical marginal bone changes around implants placed in posterior maxilla: a multi-centre prospective study.

BACKGROUND: Numerous clinical variables may influence early marginal bone loss (EMBL), including surgical, prosthetic and host-related factors. Among them, bone crest width plays a crucial role: an adequate peri-implant bone envelope has a protective effect against the influence of the aforementioned factors on marginal bone stability. The aim of the present study was to investigate the influence of buccal and palatal bone thickness at the time of implant placement on EMBL during the submerged healing period. METHODS: Patients presenting a single edentulism in the upper premolar area and requiring implant-supported rehabilitation were enrolled following inclusion and exclusion criteria. Internal connection implants (Twinfit, Dentaurum, Ispringen, Germany) were inserted after piezoelectric implant site preparation. Mid-facial and mid-palatal thickness and height of the peri-implant bone were measured immediately after implant placement (T0) with a periodontal probe and recorded to the nearest 0.5 mm. After 3 months of submerged healing (T1), implants were uncovered and measurements were repeated with the same protocol. Kruskal-Wallis test for independent samples was used to compare bone changes from T0 to T1. Multivariate linear regression models were built to assess the influence of different variables on buccal and palatal EMBL. RESULTS: Ninety patients (50 females, 40 males, mean age 42.9 ± 15.1 years), treated with the insertion of 90 implants in maxillary premolar area, were included in the final analysis. Mean buccal and palatal bone thickness at T0 were 2.42 ± 0.64 mm and 1.31 ± 0.38 mm, respectively. Mean buccal and palatal bone thickness at T1 were 1.92 ± 0.71 mm and 0.87 ± 0.49 mm, respectively. Changes in both buccal and palatal thickness from T0 to T1 resulted statistically significant (p = 0.000). Changes in vertical bone levels from T0 to T1 resulted not significant both on buccal (mean vertical resorption 0.04 ± 0.14 mm; p = 0.479) and palatal side (mean vertical resorption 0.03 ± 0.11 mm; p = 0.737). Multivariate linear regression analysis showed a significant negative correlation between vertical bone resorption and bone thickness at T0 on both buccal and palatal side. CONCLUSION: The present findings suggest that a bone envelope > 2 mm on the buccal side and > 1 mm on the palatal side may effectively prevent peri-implant vertical bone resorption following surgical trauma. TRIAL REGISTRATION: The present study was retrospectively recorded in a public register of clinical trials ( www. CLINICALTRIALS: gov - NCT05632172) on 30/11/2022.

Does new bone formation vary in different sites within the same maxillary sinus after lateral augmentation? A prospective histomorphometric study.

OBJECTIVE: The aim of this study was to evaluate histomorphometric outcomes of lateral maxillary sinus augmentation in different areas of the same cavity and to correlate results to bucco-palatal sinus width (SW) and residual bone height (RBH). MATERIAL AND METHODS: Patients needing maxillary sinus floor elevation (RBH <5 mm) to insert two nonadjacent implants were treated with lateral augmentation using a composite graft. Six months later, two bone-core biopsies (mesial/distal) were retrieved in implant insertion sites. SW and RBH were measured on cone beam computed tomography, and correlations between histomorphometric and anatomical parameters were evaluated by multivariate linear regression analysis. RESULTS: Twenty patients underwent sinus augmentation, and eighteen were included in the final analysis (two dropouts for membrane perforation). Mean newly formed mineralized tissue percentage (%NFMT) after 6 months in mesial and distal sites was 17.5 ± 4.7 and 11.6 ± 4.7, respectively (p = .0004). Multivariate linear regression showed a strong negative correlation between SW and %NFMT (ß coefficient=-.774, p < .0001) and no correlation between RBH and %NFMT (ß coefficient =-.038, p = .825). CONCLUSIONS: The present study confirms that %NFMT after lateral sinus augmentation occurs at different rates in different anatomical areas of the same maxillary sinus, showing a strong negative correlation with SW, whereas no influence of RBH was observed. Clinicians should regard SW as a guide for graft selection and to decide duration of the healing period. Researchers should consider SW as a predictor variable, when comparing regenerative outcomes of different biomaterials by using maxillary sinus as an experimental model.

Intraoperative complications and early implant failure after transcrestal sinus floor elevation with residual bone height ≤5 mm: A retrospective multicenter study.

OBJECTIVE: Clinical indications for maxillary sinus floor elevation with transcrestal techniques have increased in recent years even in sites with minimal residual bone height (RBH). Nevertheless, limited information is currently available on incidence of intraoperative complications and early implant failure in these cases. MATERIAL AND METHODS: This retrospective multicenter study was performed on anonymized clinical and radiographic records of patients who underwent transcrestal sinus floor elevation in seven clinical centers. Influence of different factors related to patient, and sinus anatomy and surgical technique on the incidence of intraoperative complications and early implant failure rate after transcrestal sinus lift were investigated. RESULTS: A total of 430 patients treated with transcrestal sinus floor elevation for single-implant insertion in sites with RBH ≤5 mm were included in the final analysis. After 1 year of loading, 418 implants of 430 were satisfactorily in function. Early implant failure was recorded in 12 cases (2.8%); results were significantly associated with the presence of large sinus cavities and with the occurrence of membrane perforation. The following adverse events were recorded: membrane perforation (7.2%), acute sinusitis (0.9%), implant displacement into the sinus cavity (0.7%), oro-antral fistula (0.2%), and benign paroxysmal positional vertigo (0.5% of osteotome cases). A strong direct correlation between sinus membrane perforation and bucco-palatal sinus width (p = .000) was demonstrated. CONCLUSIONS: Early implant failure after transcrestal sinus elevation showed significant direct correlation with bucco-palatal maxillary sinus width and the presence of membrane perforation. Sinus membrane perforation was strongly associated with bucco-palatal sinus width (extremely low perforation rate in narrow and much higher incidence in wide sinuses).

Label-free analysis of gingival crevicular fluid (GCF) by surface enhanced Raman scattering (SERS).

Gingival crevicular fluid (GCF) is an interesting biofluid reflecting the physiological and pathological states of a single dental element. Due to this unique feature, in recent years, metabolomic analysis of GCF has gained attention as a biometric tool for the diagnosis and therapy of periodontal disease. Traditional methods are, however, too slow, cumbersome and expensive for a health-care routine. Surface enhanced Raman scattering (SERS) can offer rapid and label-free detailed molecular fingerprints that can be used for biofluid analysis. Here we report the first SERS characterization of GCF using an easy and quick sample preparation. The dominant features in the SERS spectrum of GCF are ascribed to very few metabolites, in particular to uric acid, hypoxanthine, glutathione and ergothioneine. Additionally, we succeeded in differentiating between the SERS signal of GCF collected from healthy volunteers and the one collected from patients with periodontal disease.

Evaluating the stability of extended-pour alginate impression materials by using an optical scanning and digital method.

STATEMENT OF PROBLEM: The dimensional stability of alginate dental impressions is a key factor for the reliability of delayed gypsum pouring and digital scanning. However, studies of the dimensional stability of alginates with conventional methods that consider the dimensional variations of large impressions are lacking. PURPOSE: The purpose of this in vitro study was to investigate and compare 2 digital methods for the analysis of dimensional stability of large impressions made with 5 different extended-pour alginates and to assess dimensional stability up to 5 days. MATERIAL AND METHODS: Impressions of a simplified master maxillary model were made with Alginoplast, Blueprint, Hydrogum 5, Orthoprint, and Phase Plus and then analyzed at different time points. Digital scans of the alginate impression surfaces were obtained with a desktop scanner and analyzed by evaluating the linear measurements between reference points and by using a novel method that consists of the analysis of the entire scanned surface to evaluate the expansion and contraction of the impressions. RESULTS: The first method revealed that the dimensional changes did not exceed 0.5%, with the exception of Phase Plus at day 3 (-0.6 ±0.7%), and the average dimensional variation was always lower than or equal to 0.2 mm. Blueprint was the most stable material (-0.2 ±0.6%). The second method revealed dimensional variations always lower than 0.03 mm and confirmed Blueprint as the best performing material (0.001 ±0.006 mm) and Phase Plus the worst (-0.019 ±0.006 mm). CONCLUSIONS: Both the methods used to evaluate alginate stability showed that the analyzed materials remain stable over time; the dimensional variations showed a similar trend, with differences in the absolute values depending on the applied method. Linear measurements are affected by the operator and choice of reference points; however, by evaluating the average variations of the entire structure surfaces, local variations should be minimized. The evaluation of the average variations with the second method offers the advantage of a rapid visual representation of these variations.

The impact of graft remodeling on peri-implant bone support at implants placed concomitantly with transcrestal sinus floor elevation: A multicenter, retrospective case series.

OBJECTIVES: To evaluate the impact on peri-implant bone support (as assessed on periapical radiographs) of the remodeling dynamics of varying graft biomaterials used for transcrestal sinus floor elevation (tSFE). METHODS: The study is a multicenter, retrospective series of cases undergone tSFE (performed according to the Smart Lift technique) and concomitant implant placement. At operator's discretion, tSFE was performed with bone core (BC) alone or supplemented by deproteinized bovine or porcine bone mineral (DBBM and DPBM, respectively), synthetic hydroxyapatite in a collagen matrix (S-HA), or ß-tricalcium phosphate (ß-TCP). Immediately after surgery, at 6-12 months post-surgery, and at later (≥24 months) follow-up intervals, the percentage proportion of the implant surface in direct contact with the radiopaque area was calculated for the entire implant surface (totCON%). Also, the height of the graft apical to the implant apex (aGH) was assessed. RESULTS: At 6-12 months following tSFE, median totCON% was 100%, with a median aGH of 1.4 mm. A tendency of aGH to decrease in height was observed at later follow-up intervals for sites treated with all grafting procedures. In all treatment groups, the majority of the implant surface was still surrounded by the radiopaque area at the longest follow-up visits. CONCLUSIONS: Although the height of the peri-implant radiopaque area apical to the implant apex tends to reduce overtime at sites which have received tSFE, the peri-implant bone support seems to be maintained long term irrespective of the graft material used.

Biological width establishment around dental implants is influenced by abutment height irrespective of vertical mucosal thickness: A cluster randomized controlled trial.

OBJECTIVE: Prosthetic abutment height and peri-implant mucosal thickness are considered factors that influence marginal bone remodeling during biological width establishment around dental implants. However, no clinical studies have evaluated their simultaneous effect on marginal bone loss (MBL). This study analyzes the influence of abutment height on MBL around implants surrounded by both thin and thick mucosa up to 12 months after prosthetic loading. MATERIAL AND METHODS: Seventy platform-switched implants with internal hex were placed equicrestally in two groups of patients with different vertical mucosal thickness: thin (≤2.0 mm) and thick mucosa (>2.0 mm). After three months of submerged healing, prosthetic abutments with a height of 1 mm (short) or 3 mm (long) were randomly assigned for single crown screwed restoration in both groups. MBL was evaluated on radiographs taken at implant placement (T0 ), restoration delivery (T1 ), and after 6 months (T2 ) and 12 months (T3 ) of loading. RESULTS: After 12 months of loading, 66 implants were functioning (two dropouts, two failures), resulting in a 97% survival rate. Compared with T0 , mean MBL at T3 ranged between 0.59 and 0.80 mm in short abutment groups and between 0.28 and 0.37 mm in long abutment groups. Differences resulted statistically significant, irrespective of vertical peri-implant mucosal thickness. The MBL pattern over time showed the greatest amount of bone resorption in the first 6 months after loading, particularly around implants with short abutments. CONCLUSIONS: Platform-switched implants restored with short abutments present greater marginal bone loss than identical implants with long abutments, without significant peri-implant mucosal thickness effects.

Should we fear direct oral anticoagulants more than vitamin K antagonists in simple single tooth extraction? A prospective comparative study.

OBJECTIVES: The aim of this prospective comparative clinical study was to evaluate the effect of oral anticoagulants on peri- and post-operative bleeding during simple single tooth extractions, comparing patients in treatment with vitamin K antagonists (VKAs) and patients assuming direct oral anticoagulants (DOACs). MATERIALS AND METHODS: Patients under oral anticoagulant therapy needing dental extraction were eligible for entering the study; patients were enrolled following inclusion and exclusion criteria and divided into VKAs and DOAC group according to the anticoagulation therapy. Included patients underwent a simple single dental extraction with elevators and forceps with a maximum surgical time of 15 minutes, without anticoagulation therapy discontinuation. All participants were assessed pre-operatively, during surgery, 30 min minutes and 7 days after surgery. Biological complications were registered and post-extraction bleeding was clinically defined according to Iwabuchi classification. Parametric and non-parametric tests were used to evaluate the variables between the groups. RESULTS: Sixty-five patients per group were enrolled and 130 teeth were extracted. The two groups were comparable for pre-, peri-, and post-operative variables. Only 1 patient of DOAC group and 2 patients for VKA group needed medical evaluation for post-extractive bleeding. No statistically significant difference resulted in post-operative bleeding events between the groups (p = 0.425). CONCLUSIONS: DOAC and VKA patients showed the same incidence of bleeding complications after simple single tooth extraction. Bleeding events were not statistically significant and not clinically relevant. CLINICAL RELEVANCE: Patients assuming DOACs can be treated similarly to patients in VKAs therapy with INR index between 2 and 3. Non-ceasing of DOAC therapy seems to be appropriate for simple single dental extractions.

Primary Stability of Short Implants Inserted Using Piezoelectric or Drilling Systems: An In Vitro Comparison.

The primary objective of the present in vitro study was to evaluate the influence of implant site preparation technique (drills vs ultrasonic instrumentation) on the primary stability of short dental implants with two different designs inserted in simulated low-quality cancellous bone. Eighty implant sites were prepared in custom-made solid rigid polyurethane blocks with two different low cancellous bone densities (5 or 15 pounds per cubic foot [PCF]), equally distributed between piezoelectric (Surgysonic Moto, Esacrom, Italy) and conventional drilling techniques. Two short implant systems (Prama and Syra, Sweden & Martina) were tested by inserting 40 fixtures of each system (both 6.0 mm length and 5.0 mm diameter), divided in the four subgroups (drills/5 PCF density; drills/15 PCF density; piezo/5 PCF density; piezo/15 PCF density). Insertion torque (Ncm), implant stability quotient values, removal torque (Ncm), and surgical time were recorded. Data were analyzed by 3-way ANOVA and Scheffé's test (α = 0.05). With slight variations among the considered dependent variables, overall high primary implant stability was observed across all subgroups. Piezoelectric instrumentation allowed for comparable or slightly superior primary stability in comparison with the drilling procedures in both implant systems. The Prama implants group showed the highest mean reverse torque and Syra implants the highest implant stability quotient values. Piezoelectric implant site preparation took prolonged operative time compared to conventional preparation with drills; among the drilling procedures, Syra system required fewer surgical steps and shorter operative time.

Primary stability of short implants inserted using piezoelectric or drilling systems: an in vitro comparison.

The primary objective of the present in vitro study was to evaluate the influence of implant site preparation technique (drills vs. ultrasonic instrumentation) on the primary stability of short dental implants with two different designs inserted in simulated low quality cancellous bone. Eighty implant sites were prepared in custom-made solid rigid polyurethane blocks with two different low cancellous bone densities (5 or 15 pounds per cubic foot, PCF), equally distributed between piezoelectric (Surgysonic Moto, Esacrom, Italy) and conventional drilling techniques. Two short implant systems (Prama and Syra, Sweden & Martina) were tested by inserting 40 fixtures of each system (both 6.0 mm length and 5.0 mm diameter), divided in the four subgroups (drills/5 PCF density; drills/15 PCF density; piezo/5 PCF density; piezo/15 PCF density). Insertion torque (Ncm), implant stability quotient values, removal torque (Ncm) and surgical time were recorded. Data were analyzed by three-way ANOVA and Scheffé's test (α=0.05). With slight variations among the considered dependent variables, overall high primary implant stability was observed across all subgroups. Piezoelectric instrumentation allowed for comparable or slightly superior primary stability in comparison with the drilling procedures in both implant systems. Prama implants group showed the highest mean reverse torque, Syra implants the highest implant stability quotient values. Piezoelectric implant site preparation took prolonged operative time compared to conventional preparation with drills; among the drilling procedures, Syra system requires fewer surgical steps and shorter operative time.

New bone formation after transcrestal sinus floor elevation was influenced by sinus cavity dimensions: A prospective histologic and histomorphometric study.

OBJECTIVE: The aim of this multicenter prospective study was to analyze clinically and histologically the influence of sinus cavity dimensions on new bone formation after transcrestal sinus floor elevation (tSFE). MATERIAL AND METHODS: Patients needing maxillary sinus augmentation (residual crest height <5 mm) were treated with tSFE using xenogeneic granules. Six months later, bone-core biopsies were retrieved for histological analysis in implant insertion sites. Bucco-palatal sinus width (SW) and contact between graft and bone walls (WGC) were evaluated on cone beam computed tomography, and correlations between histomorphometric and anatomical parameters were quantified by means of forward multiple linear regression analysis. RESULTS: Fifty consecutive patients were enrolled and underwent tSFE procedures, and forty-four were included in the final analysis. Mean percentage of newly formed bone (NFB) at 6 months was 21.2 ± 16.9%. Multivariate analysis showed a strong negative correlation between SW and NFB (R2  = .793) and a strong positive correlation between WGC and NFB (R2  = .781). Furthermore, when SW was stratified into three groups (<12 mm, 12 to 15 mm, and >15 mm), NFB percentages (36%, 13% and 3%, respectively) resulted significantly different. CONCLUSIONS: This study represented the first confirmation based on histomorphometric data that NFB after tSFE was strongly influenced by sinus width and occurred consistently only in narrow sinus cavities (SW <12 mm, measured between buccal and palatal walls at 10-mm level, comprising the residual alveolar crest).

Bone Scrapers Versus Piezoelectric Surgery in the Lateral Antrostomy for Sinus Floor Elevation.

The purpose of this investigation is to evaluate 2 different methods for reducing cortical wall thickness in sinus floor augmentation surgery. A manual bone scraper was compared in terms of efficacy, speed, and safety to an ultrasonic insert for osteoplasty, in a randomized controlled clinical trial with a split-mouth design. Twenty-five patients with severe posterior maxillary atrophy were treated with bilateral sinus floor elevation with lateral approach. Antrostomies were randomly performed by eroding the cortical wall with a manual bone scraper (test site) or with an ultrasonic insert (control site) until the membrane was visible under a thin layer of bone, before outlining the window with a piezoelectric device. Occurrence of membrane perforation, laceration of vascular branches, and surgical time were recorded. Mean surgical time of the antrostomy in the test sites was 9'18", while in the control sites was 9'47". No significant differences were found in terms of surgical time, incidence of membrane perforation during antrostomy (4.3% in both groups), or other intraoperative complications between the 2 techniques. Both surgical approaches represent effective options for performing lateral antrostomies during sinus floor elevation procedures in a safe and predictable way.

Influence of Maxillary Sinus Width on New Bone Formation After Transcrestal Sinus Floor Elevation: A Proof-of-Concept Prospective Cohort Study.

PURPOSE: Graft maturation in the maxillary sinus requires adequate angiogenesis and osteoprogenitor cells migration from the surrounding bony walls: the aim of this study was to analyze the correlation between sinus cavity dimensions and new bone formation after transcrestal sinus floor elevation (tSFE). METHODS: Patients needing maxillary sinus augmentation (residual crest height ≤ 4 mm) were treated with tSFE using xenogeneic granules. Six months later, bone-core biopsies were retrieved for histological analysis in the implant insertion sites. Buccopalatal sinus width (SW) was evaluated on cone beam computed tomography, and correlations between histomorphometric and anatomical parameters were quantified by means of linear regression analysis. RESULTS: Eight consecutive patients underwent tSFE procedures: at 6 months, average percentage of newly formed bone resulted 24.2% ± 7.9%. Statistical analysis showed a strong inverse correlation between SW and new bone formation (R = 0.88), and a strong direct correlation between the number of exposed bone walls and new bone formation (R = 0.82). CONCLUSION: Within the limitations of this proof-of-concept study, in which a restricted number of patients were analyzed, tSFE showed more predictable results in narrow than in large sinuses, in terms of new bone formation.

Minimally invasive transcrestal sinus floor elevation with deproteinized bovine bone or ß-tricalcium phosphate: a multicenter, double-blind, randomized, controlled clinical trial.

AIMS: To evaluate the outcomes of transcrestal sinus floor elevation (tSFE) performed with a minimally invasive procedure (Smart Lift technique) combined with the additional use of deproteinized bovine bone mineral (DBBM) or ß-tricalcium phosphate (ß-TCP). METHODS: In a multicenter randomized controlled trial, 38 sites in 38 patients were treated with the Smart Lift technique in association with DBBM (n = 19) or ß-TCP (n = 19). The extent of the sinus lift (SL) and the height of the graft apical to the implant apex (aGH) were assessed on periapical radiographs taken immediately after surgery and at 6 months following surgery. RESULTS: (i) Substantial aGH and SL were observed immediately after surgery and at 6 months, with no significant differences between DBBM and ß-TCP groups; (ii) a significant graft remodelling was observed from post-surgery to 6-months in the ß-TCP group and (iii) limited incidence of complications as well as limited post-operative pain and discomfort were associated with the use of both graft materials. CONCLUSIONS: The Smart Lift technique in conjunction with the additional use of either DBBM or ß-TCP may provide a substantial elevation of the maxillary sinus floor along with limited post-surgical complications and post-operative pain/discomfort.