Grafting of bacterial polyhydroxybutyrate (PHB) onto cellulose via in situ reactive extrusion with dicumyl peroxide.

Polyhydroxybutyrate (PHB) was grafted onto cellulose fiber by dicumyl peroxide (DCP) radical initiation via in situ reactive extrusion. The yield of the grafted (cellulose-g-PHB) copolymer was recorded and grafting efficiency was found to be dependent on the reaction time and DCP concentration. The grafting mechanism was investigated by electron spin resonance (ESR) analysis and showed the presence of radicals produced by DCP radical initiation. The grafted copolymer structure was determined by nuclear magnetic resonance (NMR) spectroscopy. Scanning electronic microscopy (SEM) showed that the cellulose-g-PHB copolymer formed a continuous phase between the surfaces of cellulose and PHB as compared to cellulose-PHB blends. The relative crystallinity of cellulose and PHB were quantified from Fourier transform infrared (FTIR) spectra and X-ray diffraction (XRD) results, while the absolute degree of crystallinity was evaluated by differential scanning calorimetry (DSC). The reduction of crystallinity indicated the grafting reaction occurred not just in the amorphous region but also slightly in crystalline regions of both cellulose and PHB. The smaller crystal sizes suggested the brittleness of PHB was decreased. Thermogravimetric analysis (TGA) showed that the grafted copolymer was stabilized relative to PHB. By varying the reaction parameters the compositions (%PHB and %cellulose) of resultant cellulose-g-PHB copolymer are expected to be manipulated to obtain tunable properties.

Evaluation of the prevalence and prospective clinical impact of the JAK2 V617F mutation in coronary patients.

The JAK2 V617F mutation is not only found in the majority of patients with myeloproliferative neoplasms (MPN), including essential thrombocythemia (ET), but also has been reported in individuals without overt MPN. A close relation of the JAK2 V617F mutation to atherothrombotic events has been described, at least in patients with MPN. The prevalence of the JAK2 V617F mutation and its clinical impact in coronary patients is unknown. To address this issue, DNA samples from 1,589 subjects undergoing coronary angiography with up to 11 years of follow up were genotyped using allele-specific real-time PCR assays. Prevalence of the JAK2 V617F mutation was 1.32% (n = 21) in coronary patients. Two JAK2 V617F positive patients showed baseline platelet counts indicative for ET and a third patient developed ET during follow up, finally resulting in a percentage of 0.188% of ET cases. This corresponds to an up to fivefold accumulation of ET cases in coronary patients compared with the general population. Our study showed no impact of the JAK2 V617F mutation on future atherothrombotic events or overall survival (HR = 1.04 [0.33-3.27]; P = 0.949 and HR = 0.35 [0.05-2.46]; P = 0.288, respectively). Therefore, our data suggest that JAK2 V617F positive coronary patients are not at increased risk for future atherothrombotic complications. Routine mutation screening in coronary patients is, therefore, not warranted. However, number of ET cases appears to be accumulated in coronary patients. For this reason, we recommend JAK2 V617F testing only in coronary patients showing abnormal blood cell counts for further clarification.

The Influence of Headform Friction and Inertial Properties on Oblique Impact Helmet Testing.

Helmet-testing headforms replicate the human head impact response, allowing the assessment of helmet protection and injury risk. However, the industry uses three different headforms with varying inertial and friction properties making study comparisons difficult because these headforms have different inertial and friction properties that may affect their impact response. This study aimed to quantify the influence of headform coefficient of friction (COF) and inertial properties on oblique impact response. The static COF of each headform condition (EN960, Hybrid III, NOCSAE, Hybrid III with a skull cap, NOCSAE with a skull cap) was measured against the helmet lining material used in a KASK prototype helmet. Each headform condition was tested with the same helmet model at two speeds (4.8 & 7.3 m/s) and two primary orientations (y-axis and x-axis rotation) with 5 repetitions, totaling 100 tests. The influence of impact location, inertial properties, and friction on linear and rotational impact kinematics was investigated using a MANOVA, and type II sums of squares were used to determine how much variance in dependent variables friction and inertia accounted for. Our results show significant differences in impact response between headforms, with rotational head kinematics being more sensitive to differences in inertial rather than frictional properties. However, at high-speed impacts, linear head kinematics are more affected by changes in frictional properties rather than inertial properties. Helmet testing protocols should consider differences between headforms' inertial and frictional properties during interpretation. These results provide a framework for cross-comparative analysis between studies that use different headforms and headform modifiers.

Aqueous exfoliation and dispersion of monolayer and bilayer graphene from graphite using sulfated cellulose nanofibrils.

Amphiphilic sulfated cellulose nanofibrils were synthesized with yields in excess of 99% by sulfation of dissolving pulp cellulose using chlorosulfonic acid in anhydrous N,N-dimethyl formamide followed by high-speed blending. The sulfation level was stoichiometrically tunable to between 1.48 and 2.23 mmol g-1. The optimized SCNF demonstrated the ability to act as an effective dispersant for graphene produced via exfoliation in aqueous media, allowing for the production of aqueous stabilized graphene with 3.9 ± 0.3 wt% graphite to graphene conversion and suspended solids comprised of 19.5 ± 1.5 wt% graphene. Graphene exfoliated with SCNF was observed to consist exclusively of mono- and bilayers, with 42% of sheets being monolayer. Furthermore, it was demonstrated that SCNF defibrillation and graphene exfoliation could be combined into a single one-pot process.

Regioselectively Carboxylated Cellulose Nanofibril Models from Dissolving Pulp: C6 via TEMPO Oxidation and C2,C3 via Periodate-Chlorite Oxidation.

Regioselective C6 and C2,C3 carboxylated cellulose nanofibrils (CNFs) have been robustly generated from dissolving pulp, a readily available source of unmodified cellulose, via stoichiometrically optimized 2,2,6,6-tetramethylpyperidine-1-oxyl (TEMPO)-mediated and sequential sodium periodate-sodium chlorite (PC) oxidation coupled with high-speed blending. Both regioselectively optimized carboxylated CNF series possess the widest ranges of comparable charges (0.72-1.48 mmol/g for T-CNFs vs. 0.72-1.10 mmol/g for PC-CNFs), but similar ranges of thickness (1.3-2.4 nm for T-CNF, 1.8-2.7 nm PC-CNF), widths (4.6-6.6 nm T-CNF, 5.5-5.9 nm PC-CNF), and lengths (254-481 nm T-CNF, 247-442 nm PC-CNF). TEMPO-mediated oxidation is milder and one-pot, thus more time and process efficient, whereas the sequential periodate-chlorite oxidation produces C2,C3 dialdehyde intermediates that are amenable to further chemical functionalization or post-reactions. These two well-characterized regioselectively carboxylated CNF series represent coherent cellulose nanomaterial models from a single woody source and have served as references for their safety study toward the development of a safer-by-design substance evaluation tool.

The impact of surface functionalization of cellulose following simulated digestion and gastrointestinal cell-based model exposure.

Surface-functionalized cellulose materials are developed for various purposes, including food additives and food contact materials. A new biologically relevant testing strategy has been developed based on guidance from the European Food Safety Authority to demonstrate the safety of several next-generation surface-functionalized cellulose materials. This strategy involves a complex three-stage simulated digestion to compare the health effects of thirteen novel different types of cellulose. The physical and chemical properties of surface-functionalized fibrillated celluloses differed depending on the type, amount, and location of functional groups such as sulfonate, TEMPO-oxidized carboxy, and periodate-chlorite oxidized dicarboxylic acid celluloses. Despite exposure to gastrointestinal fluids, the celluloses maintained their physicochemical properties, such as negative surface charges and high length-to-width/thickness aspect ratios. An established intestinal co-culture model was used to measure cytotoxicity, barrier integrity, oxidative stress, and pro-inflammatory response to create a toxicological profile for these unique materials. We conclude that the C6 carboxylated cellulose nanofibrils by TEMPO-oxidation induced the most toxicity in the biological model used in this study and that the observed effects were most prominent at the 4-hour post-exposure time point.

Human Head and Helmet Interface Friction Coefficients with Biological Sex and Hair Property Comparisons.

Dummy headforms used for impact testing have changed little over the years, and frictional characteristics are thought not to represent the human head accurately. The frictional interface between the helmet and head is an essential factor affecting impact response. However, few studies have evaluated the coefficient of friction (COF) between the human head and helmet surface. This study's objectives were to quantify the human head's static and dynamic COF and evaluate the effect of biological sex and hair properties. Seventy-four participants slid their heads along a piece of helmet foam backed by a fixed load cell at varying normal force levels. As normal force increased, static and dynamic human head COF decreased following power-law curves. At 80 N, the static COF is 0.32 (95% CI 0.30-0.34), and the dynamic friction coefficient is 0.27 (95% CI 0.26-0.28). Biological sex and hair properties were determined not to affect human head COF. The COFs between the head and helmet surface should be used to develop more biofidelic head impact testing methods, define boundary conditions for computer simulations, and aid decision-making for helmet designs.

Patients with unilateral ankle arthritis have decreased discrete and time-series limb symmetry compared to healthy controls.

Patients with ankle arthritis (AA) have side-to-side limb differences at the ankle and in spatiotemporal measures; however, the degree of symmetry between limbs has not been compared to a healthy population. The purpose of this study was to determine differences in limb symmetry during walking for discrete and time-series measures when comparing patients with unilateral AA to healthy participants. Thirty-seven AA and 37 healthy participants were age, gender, and body mass index matched. Three-dimensional gait mechanics and ground reaction force (GRF) were captured during four to seven walking trails. GRF and hip and ankle mechanics were extracted bilaterally for each trial. The Normalized Symmetry Index and Statistical Parameter Mapping were used to assess discrete and time-series symmetry, respectively. Discrete symmetry was analyzed using linear mixed-effect models to determine significant differences between groups (α = 0.05). Compared to healthy participants, patients with AA had decreased weight acceptance (p = 0.017) and propulsive (p < 0.001) GRF, ankle plantarflexion (p = 0.021), ankle dorsiflexion (p = 0.010), and ankle plantarflexion moment (p < 0.001) symmetry. Significant regions of difference were found between limbs and groups throughout the stance phase for the vertical GRF force (p < 0.001), the ankle angle during push-off (p = 0.047), the plantarflexion moment (p < 0.001), and the hip extension angle (p = 0.034) and moment (p = 0.010). Patients with AA have decreased symmetry in the vertical GRF and at the ankle and hip during the weight acceptance and propulsive portions of the stance phase. Therefore, clinicians should try a non improving symmetry focusing on changing hip and ankle mechanics during the weight acceptance and propulsive phases of gait.

Nano Boron Oxide and Zinc Oxide Doped Lignin Containing Cellulose Nanocrystals Improve the Thermal, Mechanical and Flammability Properties of High-Density Poly(ethylene).

The widely used high-density polyethylene (HDPE) polymer has inadequate mechanical and thermal properties for structural applications. To overcome this challenge, nano zinc oxide (ZnO) and nano boron oxide (B2O3) doped lignin-containing cellulose nanocrystals (L-CNC) were blended in the polymer matrix. The working hypothesis is that lignin will prevent CNC aggregation, and metal oxides will reduce the flammability of polymers by modifying their degradation pathways. This research prepared and incorporated safe, effective, and eco-friendly hybrid systems of nano ZnO/L-CNC and nano B2O3/L-CNC into the HDPE matrix to improve their physio-mechanical and fire-retardant properties. The composites were characterized using Fourier transform infrared spectroscopy, scanning electron microscopy, energy dispersive X-ray analysis, thermo-gravimetric analysis, differential scanning calorimetry, dynamic mechanical analysis, horizontal burning test, and microcalorimetry test. The results demonstrated a substantial increase in mechanical properties and a reduction in flammability. The scanning electron microscope (SEM) images showed some agglomeration and irregular distribution of the inorganic oxides.

Wolbachia is a nutritional symbiont in Drosophila melanogaster.

The intracellular bacterium Wolbachia is a common symbiont of many arthropods and nematodes, well studied for its impacts on host reproductive biology. However, its broad success as a vertically transmitted infection cannot be attributed to manipulations of host reproduction alone. Using the Drosophila melanogaster model and their natively associated Wolbachia strain "wMel", we show that Wolbachia infection supports fly development and buffers against nutritional stress. Wolbachia infection across several fly genotypes and a range of nutrient conditions resulted in reduced pupal mortality, increased adult emergence, and larger size. We determined that the exogenous supplementation of pyrimidines rescued these phenotypes in the Wolbachia-free, flies suggesting that Wolbachia plays a role in providing this metabolite that is normally limiting for fly growth. Additionally, Wolbachia was sensitive to host pyrimidine metabolism: Wolbachia titers increased upon transgenic knockdown of the Drosophila de novo pyrimidine synthesis pathway but not knockdown of the de novo purine synthesis pathway. We propose that Wolbachia acts as a nutritional symbiont to supplement fly development and enhance host fitness.

A common variant of the MACC1 gene is significantly associated with overall survival in colorectal cancer patients.

BACKGROUND: The newly discovered metastasis-associated in colon cancer-1 (MACC1) gene is a key regulator of the HGF/MET pathway. Deregulation of HGF/MET signaling is reported as a prognostic marker for tumorigenesis, early stage invasion, and metastasis. High expression levels of MACC1 have been associated with colon cancer metastasis and reduced survival. Potential links between the genetic diversity of the MACC1 locus and overall survival are unknown. We therefore investigated the association between MACC1 tagging single nucleotide polymorphisms (SNPs) and overall survival in a large cohort of colorectal cancer patients. METHODS: The study included 318 subjects with histopathologically proven colorectal cancer at the Academic Teaching Hospital Feldkirch, Austria. Survival data were provided by the federal agency for statistics in Austria. Genomic DNA was isolated from formalin-fixed paraffin-embedded specimens; six tagging SNPs (rs1990172, rs3114446, rs10275612, rs3095007, rs3095009, and rs7780032), capturing most of the common variants of the MACC1 locus, were genotyped by SNaPshot assays. RESULTS: Over a mean follow up period of 5.3 (± 1.0) years, 94 deaths were recorded. Carriers of the G-allele of SNP rs1990172 showed a significantly decreased overall survival (additive HR = 1.38 [1.05-1.82]; p = 0.023). Multivariate analysis adjusted for age and UICC tumor stage confirmed this result (HR = 1.49 [1.12-1.98]; p = 0.007). Other investigated genetic variants of the MACC1 gene were not significantly associated with overall survival (p-values > 0.05). CONCLUSIONS: For the first time, our study investigated the influence of MACC1 tagging polymorphisms on overall survival suggesting SNP rs1990172 as a predictor for reduced overall survival in colorectal cancer patients. Further studies will be required to validate our findings.

Two dimensional computational model coupling myoarchitecture-based lingual tissue mechanics with liquid bolus flow during oropharyngeal swallowing.

Biomechanical relationships involving lingual myoanatomy, contractility, and bolus movement are fundamental properties of human swallowing. To portray the relationship between lingual deformation and bolus flow during swallowing, a weakly one-way solid-fluid finite element model (FEM) was derived employing an elemental mesh aligned to magnetic resonance diffusional tractography (Q-space MRI, QSI) of the human tongue, an arbitrary Lagrangian-Eulerian (ALE) formulation with remeshing to account for the effects of lingual surface (boundary) deformation, an implementation of patterned fiber shortening, and a computational visualization of liquid bolus flow. Representing lingual tissue deformation in terms of its 2D principal Lagrangian strain in the mid-sagittal plane, we demonstrated that the swallow sequence was characterized by initial superior-anterior expansion directed towards the hard palate, followed by sequential, radially directed, contractions of the genioglossus and verticalis to promote lingual rotation (lateral perspective) and propulsive displacement. We specifically assessed local bolus velocity as a function of viscosity (perfect slip conditions) and observed that a low viscosity bolus (5 cP) exhibited maximal displacement, surface spreading and local velocity compared to medium (110 cP, 300 cP) and high (525 cP) viscosity boluses. Analysis of local nodal velocity revealed that all bolus viscosities exhibited a bi-phasic progression, with the low viscosity bolus being the most heterogeneous and fragmented and the high viscosity bolus being the most homogenous and cohesive. Intraoral bolus cohesion was depicted in terms of the distributed velocity gradient, with higher gradients being associated with increased shear rate and bolus fragmentation. Lastly, we made a sensitivity analysis on tongue stiffness and contractility by varying the degree of extracellular matrix (ECM) stiffness through effects on the Mooney-Rivlin derived passive matrix and by varying maximum tetanized isometric stress, and observed that a graded increase of ECM stiffness was associated with reduced bolus spreading, posterior displacement, and surface velocity gradients, whereas a reduction of global contractility resulted in a graded reduction of obtainable accommodation volume, absent bolus spreading, and loss of posterior displacement. We portray a unidirectionally coupled solid-liquid FEM which associates myoarchitecture-based lingual deformation with intra-oral bolus flow, and deduce that local elevation of the velocity gradient correlates with bolus fragmentation, a precondition believed to be associated with aspiration vulnerability during oropharyngeal swallowing.

Ventral striatal resting-state functional connectivity in adolescents is associated with earlier onset of binge drinking.

BACKGROUND: Earlier engagement in heavy drinking during adolescence is a risk factor for the development of alcohol use disorders later in life. Longitudinal studies in adolescents have linked brain structure and task-evoked function to future alcohol use; however, less is known about how intrinsic network-level interactions relate to future substance use during this developmental period. METHODS: In this prospective longitudinal study, resting-state functional connectivity of the ventral striatum, risky decision making, and sensation seeking were measured in 73 adolescents at baseline. Participants were between the ages of 14 and 15 and had no substantial history of substance use upon study entry. Follow-up interviews were conducted approximately every 3 months to assess the initiation of binge drinking (≥ 5 or ≥ 4 drinks per occasion for males or females, respectively). RESULTS: Adolescents who began binge drinking sooner exhibited greater connectivity of the ventral striatum to the left precuneus, left angular gyrus, and the left superior frontal gyrus. Greater connectivity of the ventral striatum to the right insula/putamen was associated with longer duration to the onset of binge drinking. Resting-state functional connectivity in these regions was not associated with baseline assessments of risky decision making or sensation seeking. CONCLUSIONS: Findings provide novel information about potential risk factors for early initiation of heavy alcohol use. Interventions that target relevant resting-state networks may enhance prevention efforts to decrease adolescent substance use by prolonging onset to heavier levels of alcohol consumption.

Influence of Lactic Acid Surface Modification of Cellulose Nanofibrils on the Properties of Cellulose Nanofibril Films and Cellulose Nanofibril-Poly(lactic acid) Composites.

In this study, cellulose nanofibrils (CNFs) were modified by catalyzed lactic acid esterification in an aqueous medium with SnCl2 as a catalyst. Films were made from unmodified and lactic acid-modified CNF without a polymer matrix to evaluate the effectiveness of the modification. Ungrafted and lactic acid-grafted CNF was also compounded with poly(lactic acid) (PLA) to produce composites. Mechanical, water absorption, and barrier properties were evaluated for ungrafted CNF, lactic acid-grafted CNF films, and PLA/CNF composites to ascertain the effect of lactic acid modification on the properties of the films and nanocomposites. FTIR spectra of the modified CNF revealed the presence of carbonyl peaks at 1720 cm-1, suggesting that the esterification reaction was successful. Modification of CNF with LA improved the tensile modulus of the produced films but the tensile strength and elongation decreased. Additionally, films made from modified CNF had lower water absorption, as well as water vapor and oxygen permeability, relative to their counterparts with unmodified CNFs. The mechanical properties of PLA/CNF composites made from lactic acid-grafted CNFs did not significantly change with respect to the ungrafted CNF. However, the addition of lactic acid-grafted CNF to PLA improved the water vapor permeability relative to composites containing ungrafted CNF. Therefore, the esterification of CNFs in an aqueous medium may provide an environmentally benign way of modifying the surface chemistry of CNFs to improve the barrier properties of CNF films and PLA/CNF composites.

Pro- and anticarcinogenic mechanisms of piceatannol are activated dose dependently in MCF-7 breast cancer cells.

Estrogenic procarcinogenic effects of piceatannol (PIC) contrast reports about anticarcinogenic activities of PIC. To explain this contradiction, we investigated PIC in estrogen-dependent MCF-7 breast cancer cells and elucidated those cellular mechanisms that correlated with the observed cell effects induced by PIC. Low PIC concentrations (50 nM) induced c-Myc that depended on progesterone receptor (PR) and estrogen receptor (ER). PR-mediated c-Myc induction by PIC was independent of nuclear PR activity but depended on mitogen-activated protein kinase (MAPK) signaling and was associated with an acceleration of cancer cell proliferation. In contrast, 25 µM PIC inhibited deoxynucleotide triphosphate synthesis, activated Chk2 and p38-MAPK and this was accompanied by an attenuation of cancer cell growth. Apoptosis was most probably inhibited due to activation of Akt; however, high PIC concentrations (>100 µM) permitted apoptosis-like cell death in consequence to disruption of orchestrated mitotic signaling. The presented results show for the first time that nanomolar PIC concentrations signal through PR and Erk1/2 and provide a mechanistic explanation why moderate wine consumption-but not other alcoholic beverages-increases the breast cancer risk in women. In contrast, higher PIC concentrations in the micromolar range are considered for adjuvant anticancer therapeutic concepts.

Mimicking prophage induction in the body: induction in the lab with pH gradients.

The majority of bacteria within the human body are lysogens, often harboring multiple bacteriophage sequences (prophages) within their genomes. While several different types of environmental stresses can trigger or induce prophages to enter into the lytic cycle, they have yet to be fully explored and understood in the human microbiota. In the laboratory, the most common induction method is the DNA damaging chemical Mitomycin C. Although pH has been listed in the literature as an induction method, it is not widely used. Here, we detail a protocol for prophage induction by culture under different pH conditions. We explored the effects of pH on prophage induction in bacterial isolates from the bladder, where the pH is well documented to vary significantly between individuals as well as between healthy individuals and individuals with urinary tract symptoms or disease. Using this protocol, we successfully induced phages from seven bladder E. coli strains. Testing conditions and stressors appropriate to the environment from which a lysogen is isolated may provide insight into community dynamics of the human microbiota.

Genomic Survey of E. coli From the Bladders of Women With and Without Lower Urinary Tract Symptoms.

Urinary tract infections (UTIs) are one of the most common human bacterial infections. While UTIs are commonly associated with colonization by Escherichia coli, members of this species also have been found within the bladder of individuals with no lower urinary tract symptoms (no LUTS), also known as asymptomatic bacteriuria. Prior studies have found that both uropathogenic E. coli (UPEC) strains and E. coli isolates that are not associated with UTIs encode for virulence factors. Thus, the reason(s) why E. coli sometimes causes UTI-like symptoms remain(s) elusive. In this study, the genomes of 66 E. coli isolates from adult female bladders were sequenced. These isolates were collected from four cohorts, including women: (1) without lower urinary tract symptoms, (2) overactive bladder symptoms, (3) urgency urinary incontinence, and (4) a clinical diagnosis of UTI. Comparative genomic analyses were conducted, including core and accessory genome analyses, virulence and motility gene analyses, and antibiotic resistance prediction and testing. We found that the genomic content of these 66 E. coli isolates does not correspond with the participant's symptom status. We thus looked beyond the E. coli genomes to the composition of the entire urobiome and found that the presence of E. coli alone was not sufficient to distinguish between the urobiomes of individuals with UTI and those with no LUTS. Because E. coli presence, abundance, and genomic content appear to be weak predictors of UTI status, we hypothesize that UTI symptoms associated with detection of E. coli are more likely the result of urobiome composition.

In vitro anti-cancer activity of two ethno-pharmacological healing plants from Guatemala Pluchea odorata and Phlebodium decumanum.

Many traditional healing plants successfully passed several hundred years of empirical testing against specific diseases and thereby demonstrating that they are well tolerated in humans. Although quite a few ethno-pharmacological plants are applied against a variety of conditions there are still numerous plants that have not been cross-tested in diseases apart from the traditional applications. Herein we demonstrate the anti-neoplastic potential of two healing plants used by the Maya of the Guatemala/Belize area against severe inflammatory conditions such as neuritis, rheumatism, arthritis, coughs, bruises and tumours. Phlebodium decumanum and Pluchea odorata were collected, dried and freeze dried, and extracted with five solvents of increasing polarity. We tested HL-60 and MCF-7 cells, the inhibition of proliferation and the induction of cell death were investigated as hallmark endpoints to measure the efficiency of anti-cancer drugs. Western blot and FACS analyses elucidated the underlying mechanisms. While extracts of P. decumanum showed only moderate anti-cancer activity and were therefore not further analysed, particularly the dichloromethane extract of P. odorata inhibited the cell cycle in G2-M which correlated with the activation of checkpoint kinase 2, and down-regulation of Cdc25A and cyclin D1 as well as inactivation of Erk1/2. In HL-60 and MCF-7 cells this extract was a very strong inducer of cell death activating caspase-3 followed by PARP signature type cleavage. The initiating death trigger was likely the stabilization of microtubules monitored by the rapid acetylation of alpha-tubulin, which was even more pronounced than that triggered by taxol. The dichloromethane extract of P. odorata contains apolar constituents which inhibit inflammatory responses and exhibit anti-cancer activity. The strong proapoptotic potential warrants further bioassay-guided fractionation to discover and test the active principle(s).