Concentration gradients in evaporating binary droplets probed by spatially resolved Raman and NMR spectroscopy.

Understanding the evaporation process of binary sessile droplets is essential for optimizing various technical processes, such as inkjet printing or heat transfer. Liquid mixtures whose evaporation and wetting properties may differ significantly from those of pure liquids are particularly interesting. Concentration gradients may occur in these binary droplets. The challenge is to measure concentration gradients without affecting the evaporation process. Here, spectroscopic methods with spatial resolution can discriminate between the components of a liquid mixture. We show that confocal Raman microscopy and spatially resolved NMR spectroscopy can be used as complementary methods to measure concentration gradients in evaporating 1-butanol/1-hexanol droplets on a hydrophobic surface. Deuterating one of the liquids allows analysis of the local composition through the comparison of the intensities of the C­H and C­D stretching bands in Raman spectra. Thus, a concentration gradient in the evaporating droplet was established. Spatially resolved NMR spectroscopy revealed the composition at different positions of a droplet evaporating in the NMR tube, an environment in which air exchange is less pronounced. While not being perfectly comparable, both methods­confocal Raman and spatially resolved NMR experiments­show the presence of a vertical concentration gradient as 1-butanol/1-hexanol droplets evaporate.

Conceptualizing flexible papers using cellulose model surfaces and polymer particles.

Cellulose, as a naturally abundant and biocompatible material, is still gaining interest due to its high potential for functionalization. This makes cellulose a promising candidate for replacing plastics. Understanding how cellulose interacts with various additives is crucial for creating composite materials with diverse properties, as it is the case for plastics. In addition, the mechanical properties of the composite materials are assumed to be related to the mobility of the additives against the cellulose. Using a well-defined cellulose model surface (CMS), we aim to understand the adsorption and desorption of two polymeric particles (core-shell particles and microgels) to/from the cellulose surface. The nanomechanics of particles and CMS are quantified by indentation measurements with an atomic force microscope (AFM). AFM topography measurements quantified particle adsorption and desorption on the CMS, while peak force AFM measurements determined the force needed to move individual particles. Both particles and the CMS exhibited pH-dependent charge behavior, allowing a tunable interaction between them. Particle adsorption was irreversible and driven by electrostatic forces. In contrast, desorption and particle mobility forces are dominated by structural morphology. In addition, we found that an annealing procedure consisting of swelling/drying cycles significantly increased the adhesion strength of both particles. Using the data, we achieve a deeper understanding of the interaction of cellulose with polymeric particles, with the potential to advance the development of functional materials and contribute to various fields, including smart packaging, sensors, and biomedical applications.

Systematic study of precursor effects on structure and oxygen reduction reaction activity of FeNC catalysts.

In this work, the effect of porphyrin loading and template size is varied systematically to study its impact on the oxygen reduction reaction (ORR) activity and selectivity as followed by rotating ring disc electrode experiments in both acidic and alkaline electrolytes. The structural composition and morphology are investigated by 57Fe Mössbauer spectroscopy, transmission electron microscopy, Raman spectroscopy and Brunauer-Emmett-Teller analysis. It is shown that with decreasing template size, specifically the ORR performance towards fuel cell application gets improved, while at constant area loading of the iron precursor (here expressed in number of porphyrin layers), the iron signature does not change much. Moreover, it is well illustrated that too large area loadings result in the formation of undesired side phases that also cause a decrease in the performance, specifically in acidic electrolyte. Thus, if the impact of morphology is the focus of research it is important to consider the area loading rather than its weight loading. At constant weight loading, beside morphology the structural composition can also change and impact the catalytic performance. This article is part of the theme issue 'Bio-derived and bioinspired sustainable advanced materials for emerging technologies (part 2)'.

Direct Observation of Huge Flexoelectric Polarization around Crack Tips.

Flexoelectricity is especially relevant for nanoscale structures, and it is expected to be largest at the tip of cracks. We demonstrate the presence of a huge flexoelectric polarization at crack tips in SrTiO3 by direct observation with scanning transmission electron microscopy. We observe an averaged polarization of 62 ± 16 µC cm-2 in the three unit cells adjacent to the crack tip, which is one of the largest flexoelectric polarizations ever reported. The polarization is screened by an electron density of 0.7 ± 0.1 e-/uc localized within one unit cell. These findings reveal the relevance of flexoelectricity for the science of crack formation and propagation.

Structural Properties and Magnetic Ordering in 2D Polymer Nanocomposites: Existence of Long Magnetic Dipolar Chains in Zero Field.

The existence of magnetic dipolar nanoparticle chains at zero field has been predicted theoretically for decades, but these structures are rarely observed experimentally. A prerequisite is a permanent magnetic moment on the particles forming the chain. Here we report on the observation of magnetic dipolar chains of spherical iron oxide nanoparticles with a diameter of 12.8 nm. The nanoparticles are embedded in an ultrathin polymer film. Due to the high viscosity of the polymer matrix, the dominating aggregation mechanism is driven by dipolar interactions. Smaller iron oxide nanoparticles (8 nm) show no permanent magnetic moment and do not form chains but compact aggregates. Mixed monolayers of iron oxide nanoparticles and polymer at the air-water interface are characterized by Langmuir isotherms and in situ X-ray reflectometry (XRR). The combination of the particles with a polymer leads to a stable polymer nanocomposite film at the air-water interface. XRR experiments show that nanoparticles are immersed in a thin polymer matrix of 2 nm. Using atomic force microscopy (AFM) on Langmuir-Blodgett films, we measure the lateral distribution of particles in the film. An analysis of single structures within transferred films results in fractal dimensions that are in excellent agreement with 2D simulations.

Exploring Active Sites in Multi-Heteroatom-Doped Co-Based Catalysts for Hydrogen Evolution Reactions.

Today, metal-N- as well as metal-S-doped carbon materials are known to catalyze the hydrogen evolution reaction (HER). However, especially N- and S-co-doped catalysts reach highest activity, but it remains unclear if the activity is related to MNx or MSy (M=metal) sites. In this work we apply a simple method for multi-heteroatom doping and investigate the effect of cobalt content on the HER in acidic medium. The CoNx and CoSy sites were evidenced on the basis of structural characterization by Raman, X-ray induced photoelectron spectroscopy, and TEM. The presence of sulfur enables the formation of a larger number of CoNx sites. Structure-performance relationship proves that the HER activity is dominated by CoNx rather than CoSy sites. The most active catalysts also exhibit an excellent stability under galvanostatic conditions making them of interest for electrolyser application.

Cross-Linking Cellulosic Fibers with Photoreactive Polymers: Visualization with Confocal Raman and Fluorescence Microscopy.

The properties of paper sheets can be tuned by adjusting the surface or bulk chemistry using functional polymers that are applied during (online) or after (offline) papermaking processes. In particular, polymers are widely used to enhance the mechanical strength of the wet state of paper sheets. However, the mechanical strength depends not only on the chemical nature of the polymeric additives but also on the distribution of the polymer on and in the lignocellulosic paper. Here, we analyze the photochemical attachment and distribution of hydrophilic polydimethylacrylamide-co-methacrylate-benzophenone P(DMAA-co-MABP) copolymers with defined amounts of photoreactive benzophenone moieties in model paper sheets. Raman microscopy was used for the unambiguous identification of P(DMAA-co-MABP) and cellulose specific bands and thus the copolymer distribution within the cellulose matrix. Two-dimensional Raman spectral maps at the intersections of overlapping cellulose fibers document that the macromolecules only partially surround the cellulose fibers, favor to attach to the fiber surface, and connect the cellulose fibers at crossings. Moreover, the copolymer appears to accumulate preferentially in holes, vacancies, and dips on the cellulose fiber surface. Correlative brightfield, Raman, and confocal laser scanning microscopy finally reveal a reticular three-dimensional distribution of the polymer and show that the polymer is predominately deposited in regions of high capillarity (i.e., in proximity to fine cellulose fibrils). These data provide deeper insights into the effects of paper functionalization with a copolymer and aid in understanding how these agents ultimately influence the local and overall properties of paper.

Selection of peptides binding to metallic borides by screening M13 phage display libraries.

BACKGROUND: Metal borides are a class of inorganic solids that is much less known and investigated than for example metal oxides or intermetallics. At the same time it is a highly versatile and interesting class of compounds in terms of physical and chemical properties, like semiconductivity, ferromagnetism, or catalytic activity. This makes these substances attractive for the generation of new materials. Very little is known about the interaction between organic materials and borides. To generate nanostructured and composite materials which consist of metal borides and organic modifiers it is necessary to develop new synthetic strategies. Phage peptide display libraries are commonly used to select peptides that bind specifically to metals, metal oxides, and semiconductors. Further, these binding peptides can serve as templates to control the nucleation and growth of inorganic nanoparticles. Additionally, the combination of two different binding motifs into a single bifunctional phage could be useful for the generation of new composite materials. RESULTS: In this study, we have identified a unique set of sequences that bind to amorphous and crystalline nickel boride (Ni3B) nanoparticles, from a random peptide library using the phage display technique. Using this technique, strong binders were identified that are selective for nickel boride. Sequence analysis of the peptides revealed that the sequences exhibit similar, yet subtle different patterns of amino acid usage. Although a predominant binding motif was not observed, certain charged amino acids emerged as essential in specific binding to both substrates. The 7-mer peptide sequence LGFREKE, isolated on amorphous Ni3B emerged as the best binder for both substrates. Fluorescence microscopy and atomic force microscopy confirmed the specific binding affinity of LGFREKE expressing phage to amorphous and crystalline Ni3B nanoparticles. CONCLUSIONS: This study is, to our knowledge, the first to identify peptides that bind specifically to amorphous and to crystalline Ni3B nanoparticles. We think that the identified strong binding sequences described here could potentially serve for the utilisation of M13 phage as a viable alternative to other methods to create tailor-made boride composite materials or new catalytic surfaces by a biologically driven nano-assembly synthesis and structuring.

Controlling polymerization initiator concentration in mesoporous silica thin films.

We present a strategy toward controlled polymer density in mesopores by specifically adjusting the local amount of polymerization initiator at the pore wall. The polymerization initiator concentration as well as the polymer functionalization has a direct impact on mesoporous membrane properties such as ionic permselectivity. Mesoporous silica-based thin films were prepared with specifically adjusted amount of polymerization initiator (4-(3-triethoxysilyl)propoxybenzophenone (BPSilane)) or initiator binding functions ((3-aminopropyl)triethoxysilane (APTES)), directly and homogeneously incorporated into the silica wall pursuing a sol-gel-based co-condensation approach. The amount of polymerization initiator was adjusted by varying its concentration in the sol-gel precursor solution. The surface chemistry, porosity, pore accessibility, and reactivity of the surface functional groups were investigated by using infrared spectroscopy, X-ray photoelectron spectroscopy, X-ray reflectometry, ellipsometry, atomic force microscopy, and transmission electron microscopy. We could gradually modify the amount of reactive polymerization initiators in these mesoporous membranes. Mesopores were maintained for APTES containing films for all tested ratios up to 25 mol % and for BPSilane containing films up to 15 mol %. These films showed accessible and charge-dependent ionic permselectivity and an increasing degree of functionalization with increasing precursor ratio. This approach can directly result in control of polymer grafting density in mesoporous films and thus has a direct impact on applications such as the control of ionic transport through mesoporous silica membranes.

Preparation and characterization of light-switchable polymer networks attached to solid substrates.

Surface-attached polymer networks that carry light-responsive nitrospiropyran groups in a hydrophilic PDMAA matrix were prepared on planar silicon and glass surfaces and were characterized with respect to their switching behavior under the influence of an external light trigger. Functional polymers bearing light-responsive units as well as photo-cross-linkable benzophenone groups were first synthesized using free radical copolymerization. The number of spiropyran groups in the copolymer was controlled by adjusting the concentration of the respective monomer in the copolymerization feed. The polymer films were prepared by spin-coating the functional polymers from solution and by ultraviolet light (UV)-induced cross-linking utilizing benzophenone photochemistry. On substrates with immobilized benzophenone groups, the complete polymer network is linked to the surface. The dry thickness of the films can be controlled over a wide range from a few nanometers up to more than 1 µm. The integration of such light-switchable organic moieties into a surface-attached polymer network allows one to increase the overall number of light-responsive groups per surface area by adjusting the amount of surface-attached polymer networks. The spiropyran's function in dry (solvent-free) and swollen polymer films can be reversibly switched by UV and visible irradiation. In addition, the switching in water is faster than in the dry state. Therefore, implementing light-responsive spiropyran functions in polymer films linked to solid surfaces could allow for switching of the chemical and optical surface properties in a fast and spatially controlled fashion.

Cube-octameric silsesquioxane-mediated cargo peptide delivery into living cancer cells.

Cube octameric silsesquioxanes (COSS) are among the smallest nanoparticles known to date with a diameter of only 0.7 nm. We describe a COSS-based delivery system which allows for the drug targeting in human cells. It comprises a siloxane core with seven pendant aminopropyl groups and a fluorescently labeled peptidic ligand attached to one cage corner via a reversible disulfide bond to ensure its intracellular release. Bimodal amplitude-modulated atomic force microscopy (AFM) experiments revealed the formation of dendritic COSS structures by a self-assembly of single particles on negatively charged surfaces. Nuclear targeting was demonstrated in HeLa cells by selective binding of released p21(Cip1/Waf1)-derived cargo peptide to PCNA, a protein involved in DNA replication and repair.

The cyto-linker and scaffolding protein "plectin" mis-localization leads to softening of cancer cells.

Discovering tools to prevent cancer progression requires understanding the fundamental differences between normal and cancer cells. More than a decade ago, atomic force microscopy (AFM) revealed cancer cells' softer body compared to their healthy counterparts. Here, we investigated the mechanism underlying the softening of cancerous cells in comparison with their healthy counterparts based on AFM high resolution stiffness tomography and 3D confocal microscopy. We showed microtubules (MTs) network in invasive ductal carcinoma cell cytoskeleton is basally located and segmented for around 400 nm from the cell periphery. Additionally, the cytoskeleton scaffolding protein plectin exhibits a mis-localization from the cytoplasm to the surface of cells in the carcinoma which justifies the dissociation of the MT network from the cell's cortex. Furthermore, the assessment of MTs' persistence length using a worm-like-chain (WLC) model in high resolution AFM images showed lower persistence length of the single MTs in ductal carcinoma compared to that in the normal state. Overall, these tuned mechanics support the invasive cells to ascertain more flexibility under compressive forces in small deformations. These data provide new insights into the structural origins of cancer aids in progression.

Self-Assembly of Polymer-Modified FePt Magnetic Nanoparticles and Block Copolymers.

The fabrication of nanocomposites containing magnetic nanoparticles is gaining interest as a model for application in small electronic devices. The self-assembly of block copolymers (BCPs) makes these materials ideal for use as a soft matrix to support the structural ordering of the nanoparticles. In this work, a high-molecular-weight polystyrene-b-poly(methyl methacrylate) block copolymer (PS-b-PMMA) was synthesized through anionic polymerization. The influence of the addition of different ratios of PMMA-coated FePt nanoparticles (NPs) on the self-assembled morphology was investigated using transmission electron microscopy (TEM) and small-angle X-ray scattering (SAXS). The self-assembly of the NPs inside the PMMA phase at low particle concentrations was analyzed statistically, and the negative effect of higher particle ratios on the lamellar BCP morphology became visible. The placement of the NPs inside the PMMA phase was also compared to theoretical descriptions. The magnetic addressability of the FePt nanoparticles inside the nanocomposite films was finally analyzed using bimodal magnetic force microscopy and proved the magnetic nature of the nanoparticles inside the microphase-separated BCP films.

Label-free live-cell imaging with confocal Raman microscopy.

Confocal Raman spectroscopy is a noninvasive alternative to established cell imaging methods because it does not require chemical fixation, the use of fluorescent markers, or genetic engineering. In particular, single live-cell, high-resolution imaging by confocal Raman microscopy is desirable because it allows further experiments concerning the individually investigated cells. However, to derive meaningful images from the spectroscopic data, one must identify cell components within the dataset. Using immunofluorescence images as a reference, we derive Raman spectral signatures by means of information measures to identify cell components such as the nucleus, the endoplasmic reticulum, the Golgi apparatus, and mitochondria. The extracted signatures allow us to generate representations equivalent to conventional (immuno)fluorescence images with more than three cell components at a time, exploiting the Raman spectral information alone.

Investigation and comparison of resin materials in transparent DLP-printing for application in cell culture and organs-on-a-chip.

Organs-on-a-Chip (OOCs) have recently led to major discoveries and a better understanding of 3D cell organization, cell-cell interactions and tissue response to drugs and biological cues. However, their complexity and variability are still limited by the available fabrication technology. Transparent, cytocompatible and high-resolution 3D-printing could overcome these limitations, offering a flexible and low-cost alternative to soft lithography. Many advances have been made in stereolithography printing regarding resin formulation and the general printing process, but a systematic analysis of the printing process steps, employed resins and post-treatment procedures with a strong focus on the requirements in OOCs is missing. To fill this gap, this work provides an in-depth analysis of three different resin systems in comparison to polystyrene (PS) and poly(dimethylsiloxane) (PDMS), which can be considered the gold-standards in cell culture and microfluidics. The resins were characterized with respect to transparency, cytocompatibility and print resolution. These properties are not only governed by the resin composition, but additionally by the post-treatment procedure. The investigation of the mechanical (elastic modulus ∼2.2 GPa) and wetting properties (∼60° native / 20° plasma treated) showed a behavior very similar to PS. In addition, the absorbance of small molecules was two orders of magnitude lower in the applied resins (diffusion constant ∼0.01 µm2 s-1) than for PDMS (2.5 µm2 s-1), demonstrating the intrinsic suitability of these materials for OOCs. Raman spectroscopy and UV/VIS spectrophotometry revealed that post-treatment increased monomer conversion up to 2 times and removed photo initiator residues, leading to an increased transparency of up to 50% and up to 10-times higher cell viability. High magnification fluorescence imaging of HUVECs and L929 cells cultivated on printed dishes shows the high optical qualities of prints fabricated by the Digital Light Processing (DLP) printer. Finally, components of microfluidic chips such as high-aspect ratio pillars and holes with a diameter of 50 µm were printed. Concluding, the suitability of DLP-printing for OOCs was demonstrated by filling a printed chip with a cell-hydrogel mixture using a microvalve bioprinter, followed by the successful cultivation under perfusion. Our results highlight that DLP-printing has matured into a robust fabrication technology ready for application in extensive and versatile OOC research.

Lack of SIGIRR/TIR8 aggravates hydrocarbon oil-induced lupus nephritis.

Multiple genetic factors contribute to the clinical variability of spontaneous systemic lupus erythematosus (SLE) but their role in drug-induced SLE remain largely unknown. Hydrocarbon oil-induced SLE depends on mesothelial cell apoptosis and Toll-like receptor (TLR)-7-mediated induction of type I interferons. Hence, we hypothesized that TIR8/SIGIRR, an endogenous TLR inhibitor, prevents oil-induced SLE. Sigirr-deficient dendritic cells expressed higher TLR7 mRNA levels and TLR7 activation resulted in increased IL-12 production in vitro. In vivo, lack of SIGIRR increased surface CD40 expression on spleen CD11c(+) dendritic cells and MX-1, TNF, IL-12, BAFF and BCL-2 mRNA expression 6 months after pristane injection. Spleen cell counts of CD4(-)/CD8(-) 'autoreactive' T cells and B220(+) B cells were also increased in Sigirr(-/-) mice. Serum autoantibody analysis revealed that Sigirr deficiency specifically enhanced the production of rheumatoid factor (from 4 months of age) and anti-snRNP IgG (from 5 months of age), while anti-Smith IgG or anti-dsDNA IgG were independent of the Sigirr genotype. This effect was sufficient to significantly aggravate lupus nephritis in Sigirr-deficient mice. Structure model prediction identified the BB loop of SIGIRR's intracellular TIR domain to interact with TLR7 and MyD88. BB loop deletion was sufficient to completely abrogate SIGIRR's inhibitory effect on TLR7 signalling. Thus, TIR8/SIGIRR protects from hydrocarbon oil-induced lupus by suppressing the TLR7-mediated activation of dendritic cells, via its intracellular BB loop.

Endothelialization of PDMS-based microfluidic devices under high shear stress conditions.

Microfluidic systems made out of polydimethylsiloxane (PDMS) offer a platform to mimic vascular flow conditions in model systems at well-defined shear stresses. However, extracellular matrix (ECM) proteins that are physisorbed on the PDMS are not reliably attached under high shear stress conditions, which makes long-term experiments difficult. To overcome this limitation, we functionalized PDMS surfaces with 3-aminopropyltriethoxysilane (APTES) by using different surface activation methods to develop a stable linkage between the PDMS surface and collagen, which served as a model ECM protein. The stability of the protein coating inside the microfluidic devices was evaluated in perfusion experiments with phosphate-buffered saline (PBS) at 10-40 dynes/cm2 wall shear stress. To assess the stability of cell adhesion, endothelial cells were grown in a multi-shear device over a shear stress range of 20-150 dynes/cm2. Cells on the APTES-mediated collagen coating were stable over the entire shear stress range in PBS (pH 9) for 48 h. The results suggest that at high pH values, the electrostatic interaction between APTES-coated surfaces and collagen molecules offer a very promising tool to modify PDMS-based microfluidic devices for long-term endothelialization under high shear stress conditions.

Immobilisation of CXCL8 gradients in microfluidic devices for migration experiments.

The release of inflammatory chemokines leads to the formation of chemokine gradients that result in the directed migration of immune cells to the site of injury. In this process, cells respond to soluble gradients (chemotaxis) as well as to immobilised gradients (haptotaxis). Surface-bound chemokine gradients are mostly presented by endothelial cells and supported by glycosaminoglycans (GAGs), such as heparan sulfate, involving the GAG binding site of chemokines. Microfluidic devices have been used to analyse cell migration along soluble chemokine gradients, as these devices allow the generation of stable gradients with resolutions in the range of microns. To immobilise well-controlled soluble gradients of interleukin-8 (CXCL8), an inflammatory chemokine, we developed a simple procedure using a heparin-coated PDMS-microfluidic device. We used these immobilised gradients for migration experiments with CXCL8-responsive THP-1 cells and confirmed directed cell migration. This setup might be useful for the examination of factors that may alter chemotaxis and haptotaxis as well as synergistic and antagonistic effects of other soluble and immobilised chemokines.

Inhibition of Toll-like receptors TLR4 and 7 signaling pathways by SIGIRR: a computational approach.

Toll-like receptors (TLRs) belong to the Toll-like receptor/interleukin-1 receptor (TLR/IL-1R) superfamily which is defined by a common cytoplasmic Toll/interleukin-1 receptor (TIR) domain. TLRs recognize pathogen-associated molecular patterns and initiate an intracellular kinase cascade to trigger an immediate defensive response. SIGIRR (single immunoglobulin interleukin-1 receptor-related molecule), another member of the TLR/IL-1R superfamily, acts as a negative regulator of MyD88-dependent TLR signaling. It attenuates the recruitment of MyD88 adaptors to the receptors with its intracellular TIR domain. Thus, SIGIRR is a highly important molecule for the therapy of autoimmune diseases caused by TLRs. So far, the structural mechanism of interactions between SIGIRR, TLRs and adaptor molecules is unclear. To develop a working hypothesis for this interaction, we constructed three-dimensional models for the TIR domains of TLR4, TLR7, MyD88 and SIGIRR based on computational modeling. Through protein-protein docking analysis, we developed models of essential complexes involved in the TLR4 and 7 signaling and the SIGIRR inhibiting processes. We suggest that SIGIRR may exert its inhibitory effect through blocking the molecular interface of TLR4, TLR7 and the MyD88 adaptor mainly via its BB-loop region.

Nanostructure and mechanics of mummified type I collagen from the 5300-year-old Tyrolean Iceman.

Skin protects the body from pathogens and degradation. Mummified skin in particular is extremely resistant to decomposition. External influences or the action of micro-organisms, however, can degrade the connective tissue and lay the subjacent tissue open. To determine the degree of tissue preservation in mummified human skin and, in particular, the reason for its durability, we investigated the structural integrity of its main protein, type I collagen. We extracted samples from the Neolithic glacier mummy known as 'the Iceman'. Atomic force microscopy (AFM) revealed collagen fibrils that had characteristic banding patterns of 69 +/- 5 nm periodicity. Both the microstructure and the ultrastructure of dermal collagen bundles and fibrils were largely unaltered and extremely well preserved by the natural conservation process. Raman spectra of the ancient collagen indicated that there were no significant modifications in the molecular structure. However, AFM nanoindentation measurements showed slight changes in the mechanical behaviour of the fibrils. Young's modulus of single mummified fibrils was 4.1 +/- 1.1 GPa, whereas the elasticity of recent collagen averages 3.2 +/- 1.0 GPa. The excellent preservation of the collagen indicates that dehydration owing to freeze-drying of the collagen is the main process in mummification and that the influence of the degradation processes can be addressed, even after 5300 years.