RESUMO
OBJECTIVES: The present study aims to assess the impact of bilateral and high oblique sagittal split osteotomy (BSSO/HSSO), as well as displacement distances and directions on the expected and achievable bone contact area (BCA) and changes in the intercondylar distance (ICD). The primary question addressed is whether mandibular splitting through BSSO results in a greater BCA and/or ICD when compared to splitting through HSSO. MATERIALS AND METHODS: Totally 80 mandibular displacements were performed on 20 fresh cadavers, for each subject, four splints were produces to facilitate mandibular advancement as well as setbacks of 4 and 8 mm. Pre- and postoperative CBCT scans were performed to plan the surgical procedures and to analyze the expected and achieved BCA and ICD. RESULTS: Regarding the maximum mandibular displacement, the expected BCA for HSSO/BSSO were 352.58 ± 96.55mm2 and 1164.00 ± 295.50mm2, respectively, after advancement and 349.11 ± 98.42mm2 and 1344.70 ± 287.23mm2, respectively, after setback. The achieved BCA for HSSO/BSSO were 229.37 ± 75.90mm2 and 391.38 ± 189.01mm2, respectively, after advancement and 278.03 ± 97.65mm2 and 413.52 ± 169.52 mm2, respectively after setback. The expected ICD for HSSO/BSSO were 4.51 ± 0.73 mm and 3.25 ± 1.17 mm after advancement and - 5.76 ± 1.07 mm and - 4.28 ± 1.58 mm after setback. The achieved ICD for HSSO/BSSO were 2.07 ± 2.9 mm and 1.7 ± 0.60 mm after advancement and - 2.57 ± 2.78 mm and - 1.28 ± 0.84 mm after setback. Significant differences between the BCA after HSSO and BSSO were at each displacement (p < 0.001), except for the achieved BCA after 8-mm setback and advancement (p ≥ 0.266). No significant differences were observed regarding ICD, except for the expected ICD after 8-mm setback and advancement (p ≤ 0.037). CONCLUSIONS: Compared to the virtual planning, the predictability regarding BCA and ICD was limited. ICD showed smaller clinical changes, BCA decreased significantly in the BSSO group. CLINICAL RELEVANCE: BCA and ICD might have been less important in choosing the suitable split technique. in orthognathic surgery.
Assuntos
Má Oclusão , Avanço Mandibular , Cirurgia Ortognática , Sitosteroides , Humanos , Osteotomia Sagital do Ramo Mandibular/métodos , Mandíbula/cirurgiaRESUMO
OBJECTIVES: The aim of this study was to evaluate whether thermal implant removal of osseointegrated implants is possible using a diode laser with an specific temperature-time interval. MATERIALS AND METHODS: First, tooth extraction of the first three premolars was performed in the maxilla and mandible on both sides of 10 pig. After 3 months, implants were inserted into the upper and lower jaws of 10 pigs. After 3 more months, osseointegrated implants were heated with a laser device to a temperature of 50 °C for 1 min. After 14 days, the implant stability quotient (ISQ), torque-out values, and bone-to-implant contact (BIC) ratio were assessed using resonance frequency analysis. RESULTS: ISQ values showed no significant differences within each group or between the control and test groups. Furthermore, torque-out and BIC value measurements presented no significant differences between the groups. CONCLUSIONS: At 50°C, changes in the BIC values were noticeably smaller; however, these differences were not significant. Future studies should evaluate the same procedures at either a higher temperature or longer intervals. CLINICAL RELEVANCE: With only 50 °C for 1 min, a dental implant will not de-integrate predictably.
Assuntos
Implantes Dentários , Remoção de Dispositivo , Animais , Suínos , Estudo de Prova de Conceito , Temperatura Alta , Análise de Frequência de Ressonância , Implantação Dentária Endóssea/métodos , Torque , Osseointegração/fisiologiaRESUMO
BACKGROUND: Assessment of midpalatal suture maturation on cone-beam computed tomography (CBCT) scans is performed by visual inspection and is therefore subjective. The extent to which the assessment of midpalatal suture maturation is affected by rater experience has not been adequately explored in the existing literature, thus limiting the availability of evidence-based findings. This study compared the outcomes of classification by dental students, orthodontic residents, and orthodontists. METHODS: Three different groups of students, orthodontic residents, and orthodontists evaluated 10 randomly chosen CBCT scans regarding midpalatal suture maturation from a pool of 179 patients (98 female and 81 male patients) aged 8 - 40 years which were previously classified by evaluating CBCT scans. The pool was set as benchmark utilizing midpalatal suture maturation classification by one examiner (OsiriX Lite version 11.0; Pixmeo SARL, Bernex, Switzerland). For assessment of intra-rater reliability of the examiners of each group the randomly chosen subjects were reclassified for midpalatal suture maturation after a wash-out period of two weeks by using the same software. Statistical analysis was performed to evaluate intra- and interrater reliability of the three groups with differing experience level. RESULTS: Groupwise intra-rater reliability assessment between the classification and reclassification was weak for examiners with a low level of experience (k = 0.59). Orthodontists had highest degree of agreement with regard to benchmark classification with an inter-rater reliability to be considered as moderate (k = 0.68). CONCLUSIONS: Assessment of midpalatal suture maturation on CBCT scans appears to be a subjective process and is considerably related to the experience level of the examiner. A high level of clinical experience seems to be favorable but does not necessarily ensure accurate results.
Assuntos
Ortodontistas , Estudantes de Odontologia , Feminino , Humanos , Masculino , Tomografia Computadorizada de Feixe Cônico/métodos , Suturas Cranianas , Maxila , Técnica de Expansão Palatina , Reprodutibilidade dos Testes , Suturas , Criança , Adolescente , Adulto Jovem , AdultoRESUMO
OBJECTIVES: The aim of this in vitro study was to evaluate the effect of a 3D-printed drill sleeve (DS) on the precision and duration of coronectomy sections. MATERIALS AND METHODS: Thirty-six trainees and oral surgeons performed 72 coronectomy cuts in a 3D-printed, entirely symmetric mandible model. Coronectomy was performed freehand (FH) on one side and with a DS on the other side. The occurrence of "too superficial" (≥ 4 mm unprepared lingual tooth tissue) and "too deep" (drilling ≥ 1 mm deeper as tooth contour) cuts and sectioning times were registered. RESULTS: In 7 cases, the sections were "too deep" with FH, while none with DS (OR: 18.56; 95%CI: 1.02-338.5; p = 0.048). The deviation between virtually planned and real cut depths was significantly greater in the FH group (1.91 ± 1.62 mm) than in DS group (1.21 ± 0.72 mm) (p < 0.001). A total of 18 "too superficial" buccolingual sections occurred with FH, while 8 cases with DS (OR: 3.50; 95%CI: 1.26-9.72; p = 0.016). Suboptimal sections did not correlate with experience (p = 0.983; p = 0.697). Shortest, suboptimal drillings were most frequently seen distolingually (OR: 6.76; 95% CI: 1.57-29.07; p = 0.01). In the inexperienced group, sectioning time was significantly longer with FH (158.95 ± 125.61 s vs. 106.92 ± 100.79 s; p = 0.038). CONCLUSIONS: The DS effectively reduced tooth sectioning times by less experienced colleagues. Independently from the level of experience, the use of DS obviated the need for any preparation outside the lingual tooth contour and significantly decreased the occurrence of "too superficial" cuts, leaving thinner unprepared residual tooth tissue lingually. CLINICAL RELEVANCE: Coronectomy sections may result in lingual hard and soft tissue injury with the possibility of damaging the lingual nerve. The precision of the buccolingual depth-control can be improved, while surgical time can be reduced when applying a drilling sleeve.
Assuntos
Dente Impactado , Traumatismos do Nervo Trigêmeo , Humanos , Dente Serotino/cirurgia , Coroa do Dente/cirurgia , Dente Impactado/cirurgia , Extração Dentária , Mandíbula , Impressão Tridimensional , Nervo MandibularRESUMO
OBJECTIVES: Long-term studies of modern zirconia implants are still insufficient. This prospective 8-year follow-up study investigated one-piece zirconia implants. MATERIALS AND METHODS: Patients who had received a one-piece zirconia dental implant (PURE ceramic implant, Institut Straumann GmbH, Basel, Switzerland) were included in this study. Next to the implant survival and success rates, the radiographic and clinical implant parameters were assessed. RESULTS: The overall survival rate of 67 zirconia implants in 39 patients was 100%. The overall success rate was 89.6%. Around the immediate zirconia implants, the success rate was 94.7%, and around the delayed implants, 87.5%. The immediate implants showed a significantly higher bone crest compared to the delayed implants (p = 0.0120). According to the pink esthetic score, the immediate implants revealed more favorable esthetic results compared to the delayed implants after an 8-year follow-up (p = 0.0002). CONCLUSIONS: After 8 years, the one-piece zirconia implants presented an 89.6% success rate. Regarding the timing of implantation, in individual cases, immediate implantation can have slight advantages over delayed implantation. CLINICAL RELEVANCE: Immediate implants can also be considered for zirconia implants and should not be excluded on principle.
Assuntos
Implantes Dentários , Humanos , Seguimentos , Estudos Prospectivos , Resultado do Tratamento , Planejamento de Prótese Dentária , Falha de Restauração Dentária , Estética Dentária , ZircônioRESUMO
OBJECTIVES: Due to advancing digitalisation, it is of interest to develop standardised and reproducible fully automated analysis methods of cranial structures in order to reduce the workload in diagnosis and treatment planning and to generate objectifiable data. The aim of this study was to train and evaluate an algorithm based on deep learning methods for fully automated detection of craniofacial landmarks in cone-beam computed tomography (CBCT) in terms of accuracy, speed, and reproducibility. MATERIALS AND METHODS: A total of 931 CBCTs were used to train the algorithm. To test the algorithm, 35 landmarks were located manually by three experts and automatically by the algorithm in 114 CBCTs. The time and distance between the measured values and the ground truth previously determined by an orthodontist were analyzed. Intraindividual variations in manual localization of landmarks were determined using 50 CBCTs analyzed twice. RESULTS: The results showed no statistically significant difference between the two measurement methods. Overall, with a mean error of 2.73 mm, the AI was 2.12% better and 95% faster than the experts. In the area of bilateral cranial structures, the AI was able to achieve better results than the experts on average. CONCLUSION: The achieved accuracy of automatic landmark detection was in a clinically acceptable range, is comparable in precision to manual landmark determination, and requires less time. CLINICAL RELEVANCE: Further enlargement of the database and continued development and optimization of the algorithm may lead to ubiquitous fully automated localization and analysis of CBCT datasets in future routine clinical practice.
Assuntos
Inteligência Artificial , Imageamento Tridimensional , Cefalometria/métodos , Reprodutibilidade dos Testes , Imageamento Tridimensional/métodos , Pontos de Referência Anatômicos , Algoritmos , Tomografia Computadorizada de Feixe Cônico/métodosRESUMO
BACKGROUND: The purpose of the study was to determine the possible relationship between the eruption of primary and permanent teeth and neonatal factors in German children according to gender. METHODS: A cross-sectional survey study was performed in 10 German orthodontic practices. Using a questionnaire information about gender, time of birth (week of pregnancy), birth weight (g) and height (cm), and the age of first primary and first permanent tooth eruption (months/years) of 405 children (230 girls and 175 boys) were collected. A Mann-Whitney U-test was used for group comparisons, and correlations were verified using a Pearson test. RESULTS: No correlation was found between neonatal factors (time of birth, birth weight, and birth height) and primary tooth eruption for male participants. However, for females a low correlation was found between the eruption of the first primary tooth and birth weight (r = -0.18, CI: -0.30 to -0.042, p = 0.011) and birth height (r = -0.19, CI: -0.32 to -0.054, p = 0.006). No correlations between neonatal factors and the eruption of the first permanent tooth were found for either gender. A moderate correlation was found between the first primary and first permanent tooth eruption (females: r = 0.30, CI: 0.16 to 0.43, p < 0.001; males: r = 0.22, CI: 0.059 to 0.35, p = 0.008). CONCLUSIONS: An earlier eruption of the primary teeth can be assumed with greater body weight and height at the time of birth for girls. For boys, the tendency is the opposite. However, there seems to be a catch-up growth effect due to the missing differences between both permanent tooth eruption times. Nevertheless, the first primary and the first permanent tooth eruption correlates in a German children population.
Assuntos
Parto , Erupção Dentária , Criança , Feminino , Recém-Nascido , Gravidez , Humanos , Masculino , Peso ao Nascer , Estudos Transversais , Estatísticas não ParamétricasRESUMO
BACKGROUND: The purpose of this study was to evaluate the osseointegration of zirconia and titanium implants in the rat maxilla in specimens under systemic antiresorptive therapy. MATERIALS AND METHODS: After 4 weeks of systematic medication administration (either zoledronic acid or alendronic acid), 54 rats received one zirconia and one titanium implants that were immediately inserted in the rat maxilla after tooth extraction. Twelve weeks after implant placement, histopathological samples were evaluated for implant osteointegration parameters. RESULTS: The bone-implant-contact (BIC) ratio revealed no significant inter-group or inter-material differences. The distance between the implant shoulder to the bone level was significantly greater around the titanium implants of the zoledronic acid group compared to the zirconia implants of the control group (p = 0.0005). On average, signs of new bone formation could be detected in all groups, although often without statistical differences. Signs of bone necrosis were only detected around the zirconia implants of the control group (p < 0.05). CONCLUSIONS: At the 3-month follow-up, no implant material was demonstrably better than the others in terms of osseointegration metrics under systemic antiresorptive therapy. Further studies are necessary to determine whether there are differences in the osseointegration behavior of the different materials.
Assuntos
Conservadores da Densidade Óssea , Implantes Dentários , Ratos , Animais , Osseointegração , Ácido Zoledrônico , Roedores , Titânio , Planejamento de Prótese Dentária , Maxila , Propriedades de SuperfícieRESUMO
INTRODUCTION: The purpose of this follow-up study was to assess the effects of discovery learning and subsequent standardised teaching on students' advanced dental surgical skills. MATERIALS AND METHODS: A total of 29 dental students who had no theoretical education on the Rehrmann flap were included in the skills training programme. Without prior teaching, the students were initially asked to perform a discovery surgery with a subsequent multiple-choice test (MCT) on the first day. This was followed by a video-assisted teaching lecture. On the same day and after 122 days, the surgery and MCT were repeated. Aside from the practical and theoretical assessment forms, the training was evaluated by the students themselves. RESULTS: Regarding the evaluation of surgery (EOS), significant improvements were measured between the first surgery and the second and third surgeries (p > .001). In addition, the theoretical test scores showed significant improvements after the first test when compared with the second (p = .004) and third tests (p < .001). For both assessments, no significant difference was found between the second and third attempts. The MCT and EOS in the second and third attempts strongly correlated (r = .77 and r = .71 respectively). CONCLUSION: The dental students in this study successfully learned a complex oral surgical procedure, the Rehrmann flap technique, for closing oro-antral communications. The participants indicated their high satisfaction with the teaching approach. After 122 days of follow-up, their practical and theoretical test scores remained high and presented no significant difference, which suggests that the newly learnt individual skills were retained.
Assuntos
Avaliação Educacional , Procedimentos Cirúrgicos Bucais , Humanos , Seguimentos , Avaliação Educacional/métodos , Educação em Odontologia/métodos , Aprendizagem , Ensino , Competência ClínicaRESUMO
OBJECTIVE: The aim of the present study was to investigate the influence of three grafting materials for cleft repair on orthodontic tooth movement in rats. MATERIALS AND METHODS: Artificial alveolar clefts were created in 21 Wistar rats and were repaired 4 weeks later using autografts, human xenografts and synthetic bone substitute (beta-tricalcium phosphate/hydroxyapatite [ß-TCP/HA]). A further 4 weeks later, the first molar was moved into the reconstructed maxilla. Microfocus computed tomography (µCT) was performed six times (T0-T5) to assess the tooth movement and root resorption. After 8 weeks, the affected reconstructed jaw was resected for histopathological investigation. RESULTS: Total distances reached ranged from 0.82 ± 0.72 mm (ß-TCP/HA) to 0.67 ± 0.27 mm (autograft). The resorption was particularly determined at the mesiobuccal root. Descriptive tooth movement slowed and root resorption increased slightly. However, neither the radiological changes during tooth movement (µCT T1 vs. µCT T5: autograft 1.85 ± 0.39 mm3 vs. 2.38 ± 0.35 mm3, p = 0.30; human xenograft 1.75 ± 0.45 mm3 vs. 2.17 ± 0.26 mm3, p = 0.54; ß-TCP/HA: 1.52 ± 0.42 mm3 vs. 1.88 ± 0.41 mm3, p = 0.60) nor the histological differences after tooth movement (human xenograft: 0.078 ± 0.05 mm2; ß-TCP/HA: 0.067 ± 0.049 mm2; autograft: 0.048 ± 0.015 mm2) were statistically significant. CONCLUSION: The autografts, human xenografts or synthetic bone substitute used for cleft repair seem to have a similar effect on the subsequent orthodontic tooth movement and the associated root resorptions. CLINICAL RELEVANCE: Development of root resorptions seems to have a secondary role in choosing a suitable grafting material for cleft repair.
Assuntos
Substitutos Ósseos , Reabsorção da Raiz , Animais , Substitutos Ósseos/farmacologia , Fosfatos de Cálcio , Humanos , Ratos , Ratos Wistar , Reabsorção da Raiz/diagnóstico por imagem , Técnicas de Movimentação Dentária/métodos , Raiz Dentária/patologiaRESUMO
BACKGROUND: Certification of multidisciplinary tumor centers is nowadays seen as the gold standard in modern oncological therapy for optimization and realization of guideline-based therapy and better outcomes. Single cases are reimbursed based on diagnosis-related groups (DRG). We aimed to review efficiency, cost analysis, and profitability following a certification. METHODS: Tumor board certification at the university hospital Aachen was implemented in 2013. We compared 1251 cases of oropharyngeal cancer treated from 2008 to 2017 before and after certification. For this purpose, several patient characteristics, surgery, and stay-related constants, as well as expenses and reimbursement heights were analyzed statistically. RESULTS: Following certification, the total case and patient number, surgery duration, hours of mechanical ventilation, case mix index points, DRG reimbursements as well as the costs increased significantly, whereas days of intensive care unit, amount of blood transfusions, patient clinical complexity level (PCCL) and the overall stay were significantly lowered. No changes were observed for the patient's age and gender distribution. Also, the predetermined stay duration stayed constant. CONCLUSIONS: Certification of head-neck tumor centers causes a concentration of more complex cases requiring higher surgical efforts, which can be processed more efficiently due to a higher level of professionalism. Despite their benefits in cancer care, without compensation, centers may be struggling to cover their expenses in a system, which continuously underestimates them.
RESUMO
OBJECTIVE: Lateral cephalograms (LC) should be usable to evaluate the vertical bone height of the anterior maxilla for planning the placement of orthodontic mini-implants (OMI). The purpose of this study is to determine the usability of LC for examining the real vertical dimension of the anterior palate. SETTING AND SAMPLE POPULATION: Lateral cephalograms and corresponding cone beam computed tomography (CBCT) scans were employed for examining 30 fresh cadaver heads. MATERIALS & METHODS: The minimum (distance A) and maximum (distance B) vertical palatal bone heights on LCs at the level of first premolars were measured, whereas the corresponding measurements were taken via CBCTs on the median, and 2-, 4- and 6-mm paramedian planes. Additionally, the overall minimum vertical palatal height on CBCT was recorded. RESULTS: Distance A and B on LC were about 8.3 ± 2.5 mm and 9.9 ± 2.5 mm, respectively. The median palatal height on CBCT was significantly higher than both measurements on LC (P < .01). Furthermore, the bone supply on the paramedian planes was similar or higher on CBCT compared to Distance A and similar or less compared to Distance B. The strongest correlation at the level of the premolars was found in the comparison of the maximum vertical palatal height via LC with the vertical palatal height on the median plane via CBCT (r = .84, 95% CI: 0.69-0.92, P < .001). CONCLUSIONS: In order to make the best possible use of the vertical bone supply of the anterior palate and to avoid injuries to the nasal floor, Distance A should be taken into account for planning paramedian OMI placements and distance B for median OMI insertion.
Assuntos
Implantes Dentários , Procedimentos de Ancoragem Ortodôntica , Tomografia Computadorizada de Feixe Cônico , Maxila/diagnóstico por imagem , Palato/diagnóstico por imagemRESUMO
BACKGROUND: Local anaesthesia plays a key role in many aspects of a dentist's work. The required skills to perform anaesthesia successfully are acquired at university. To take advantage of the possibilities for new teaching formats, a blended learning concept for the local anaesthesia course was developed. The aim of the study was to compare the effectiveness of face-to-face, blended and e-learning in teaching in local anaesthesia by assessing students' knowledge gain, performance of practical skills and satisfaction with the course. METHODS: All participants (n = 37) were randomly allocated into three groups. After acquiring the theoretical background in the blended learning, e-learning or lecture groups, a test to assess knowledge gain was performed. The performance of the practical skills was assessed in a small-group seminar. Student attitudes were evaluated with a questionnaire. RESULTS: The blended group showed significantly better results (mean = 17, SD =1.5) in theoretical knowledge gain than the other two groups (e-learning group: mean = 14.7, SD = 2.2; lecture group: mean = 14.8, SD =2.3). When comparing the results of the clinical skills assessment, there was no significant difference among all three groups (p > 0.017). The participants confirmed a high overall satisfaction with the course, in particular with the blended learning approach. CONCLUSION: This study indicates that blended learning improves the learning outcome for theoretical knowledge in teaching local anaesthesia more than either face-to-face learning or e-learning alone. Furthermore, the blended learning approach is highly appreciated by the students. For acquiring practical skills, this study shows that blended learning is as effective as other teaching methods.
Assuntos
Anestesia Local , Competência Clínica , Instrução por Computador , Educação em Odontologia/métodos , Estudantes/psicologia , Adulto , Feminino , Humanos , Masculino , Distribuição Aleatória , Adulto JovemRESUMO
OBJECTIVES: The aim of this study was to evaluate the accuracy of fully guided orthodontic mini-implant (OMI) placements supported by tooth- (TBGs) or gingiva-borne silicone guides (GBGs) based on virtually superimposed lateral cephalograms on virtual plaster models. MATERIALS AND METHODS: Lateral cephalograms and corresponding plaster models were virtually superimposed for the planning of OMI positions; fully guided TBGs and GBGs were fabricated (each, n = 10). A total of 40 OMIs were inserted in a paramedian position into the palate of 20 human cadavers. Postoperative cone-beam computer tomographies (CBCTs) were carried out, and an accuracy evaluation was performed by comparing preoperative planning models and postoperative CBCTs. Deviations of the axis, tip, centre of the shoulder and vertical position of each of the implants were evaluated. Furthermore, the transfer accuracy measured by postoperative CBCT scans were compared with the accuracy determined using an intraoral scanner. RESULTS: A significant deviation between TBGs (2.81° SD 2.69) and GBGs (6.22° SD 4.26) regarding implant angulation was evaluated (p = 0.005). Implant tip and implant shoulder deviations revealed no statistical differences between the guides. Accuracy values of oral scans regarding vertical deviations were significantly more inaccurate when compared with CBCTs (p < 0.001). CONCLUSIONS: The accuracy of an OMI position can be significantly increased by using a guide extension over the teeth. Vertical implant positions presented the lowest deviations. Postoperative oral scans and CBCTs represent diverging accuracy measurements when compared with virtual planning. CLINICAL RELEVANCE: Users must keep in mind that despite virtual planning deviations, inaccuracies of a few millimetres may occur.
Assuntos
Implantes Dentários , Procedimentos de Ancoragem Ortodôntica , Cirurgia Assistida por Computador , Cadáver , Desenho Assistido por Computador , Tomografia Computadorizada de Feixe Cônico , Implantação Dentária Endóssea , Humanos , Imageamento Tridimensional , Planejamento de Assistência ao PacienteRESUMO
OBJECTIVES: The aim of this randomized observer-blinded split-mouth-study is to objectively assess the influence of a rubber drain on postoperative swelling using 3D face scans as measurement method and additionally evaluate pain, trismus and complications after the osteotomy of lower third molars. MATERIAL AND METHODS: Seventy-two patients with symmetrically impacted lower wisdom teeth were recruited. Before the operation, patients rated pain using the visual analogue scale, the interincisal distance was measured, and 3D face scans were taken with an optical scanner. Each patient underwent two procedures which were at least 30 days apart. On one side, a rubber drain was inserted randomly before closure, the contralateral control side was closed without drainage. On the third and tenth postoperative day, face scans to quantify the swelling, pain evaluation and trismus measurements were performed. Due to loss of follow-up, 32 patients were excluded which resulted in 40 out of 72 patients remaining in the study. RESULTS: There was no statistical difference in using a drain on swelling and trismus on the third and tenth day (p > 0.05). Pain was slightly worse on the third day on the treatment side, but the difference was not significant (p > 0.05). We observed no differences in the number of wound infections. CONCLUSIONS: The insertion of a rubber drain does not have any influence on swelling, pain or trismus and has no impact on the number of wound infections. CLINICAL RELEVANCE: The use of a rubber drain cannot be recommended as no reduction of postoperative discomfort was detected.
Assuntos
Drenagem/métodos , Dente Serotino , Dente Impactado , Edema/etiologia , Edema/prevenção & controle , Humanos , Mandíbula/cirurgia , Dente Serotino/diagnóstico por imagem , Dente Serotino/cirurgia , Boca , Dor Pós-Operatória/prevenção & controle , Complicações Pós-Operatórias/prevenção & controle , Extração Dentária/efeitos adversos , Dente Impactado/cirurgia , Trismo/etiologia , Trismo/prevenção & controleRESUMO
ABSTRACT: A split thickness skin graft (STSG) or a full thickness skin graft (FTSG) are commonly used for donor site closure after raising a radial forearm flap. The aesthetic outcome of the donor site is frequently not satisfying for the patient. This study evaluated the aesthetic outcome of the donor site of a radial forearm flap covered with an STSG or FTSG using an objective measurement method. The forearms of 30 patients (15 FTSG, 15 STSG) were scanned with an optical three-dimensional scanner. The surface of the forearm at the skin transplant was cut out and filled by an automatic hole-filling algorithm. The mean surface deviation between the original and the filled forearm was acquired. This method was validated with a control group of 15 volunteers. A questionnaire investigating aesthetical and healing satisfaction, postoperative pain and scarring was filled in by the patients. The mean surface difference in the STSG group was 0.9907â±â0.3120 and 0.6177â±â0.2245âmm in the FTSG group. The difference in the surface deviation between STSG and FTSG groups was significant (Pâ=â0.0009). Correlations between the surface deviation and the subjective aesthetical satisfaction of the patient were not significant. In the questionnaires no significant differences between STSG and FTSG group were measured. Both FTSGs and STSGs resulted in good aesthetical outcomes after closure of a radial forearm flap donor site. Scanning the radial forearm flap donor site with an optical three-dimensional scanner supplied an objective, fast, and reliable measuring method of aesthetical outcomes.
Assuntos
Antebraço , Procedimentos de Cirurgia Plástica , Estética Dentária , Antebraço/cirurgia , Humanos , Transplante de Pele , Retalhos CirúrgicosRESUMO
BACKGROUND: The aim of the present study was to assess the development of bacterial deposits and morphological parameters around dental zirconia and titanium implants compared with natural teeth during systemic bisphosphonate medication. MATERIALS AND METHODS: Fifty-four rats were randomly allocated into one control group and two experimental groups (drug application of zoledronic and alendronic acid), with 18 animals in each group. After 4 weeks of drug delivery, either a zirconia or a titanium implant was immediately inserted. Microbiological analysis conducted 1 week, 8 weeks, and 12 weeks after surgery included total bacterial count and composition measurements. Samples were analyzed in a scanning electron microscope (SEM) equipped with energy-dispersive X-ray spectroscopy (EDX). Bone cell morphology was analyzed by transmission electron microscopy (TEM). RESULTS: One week after surgery, titanium and zirconia implants of the alendronic acid and control group showed a significantly higher bacterial count when compared to natural teeth in rats with zoledronic acid administration (p < 0.01). Less significant differences were recorded after 3 months, at which time no inter-material differences were evaluated (p > 0.05). I n the control group, TEM analysis showed that the osteoblasts had a strongly developed endoplasmic reticulum. In contrast, the endoplasmic reticulum of the osteoblasts in drug-treated animals was significantly less developed, indicating less activity. CONCLUSIONS: Within the limits of this study, neither implant material was superior to the other at 3-month follow-up. With regard to the treatment and complications of patients with bisphosphonates, the implant material should not be an influencing factor. Bisphosphonates can be used in the rat model to reduce not only the activity of osteoclasts but also osteoblasts of the peri-implant bone.
Assuntos
Alendronato , Implantes Dentários , Alendronato/farmacologia , Animais , Humanos , Microscopia Eletrônica de Varredura , Ratos , Propriedades de Superfície , Titânio , Ácido ZoledrônicoRESUMO
Background and objectives: In oral and maxillofacial operations, the iliac crest is a commonly used donor site from which to harvest bone for augmentation prior to dental implantation or for reconstruction of jaw defects caused by trauma or pathological lesions. In an aging society, the proportion of elderly patients undergoing iliac crest bone grafting for oral augmentation is growing. Although postoperative morbidity is usually moderate to low, the age and health of the patient should be considered as risk factors for complications and delayed mobilization after the operation. The aim of this retrospective study was to evaluate the postoperative morbidity and complications in elderly patients after the harvesting of iliac crest bone grafts for oral surgery. Material and Methods: Data were collected from a total of 486 patients (aged 7-85) who had a surgical procedure that included the harvesting of iliac crest bone grafts for intraoral transplantation. All patients were operated on between 2005 and 2021 in the Department for Oral and Maxillofacial Surgery of the University Hospital in Aachen, Germany. As parameters for postoperative morbidity and complications, gait disturbances, hypesthesia of cutaneous nerves, incision hernias, iliac crest fractures, delayed wound healing, and unfavorable scar formation at the donor site were all evaluated. Results: The study was performed with 485 patients due to the exclusion of one patient as the only one from whom grafts were taken from both sides. When younger and older patients were compared, neither gait disturbances (p = 0.420), nor hernias (p = 0.239), nor fractures (p = 0.239), nor hypesthesia (p = 0.297), nor wound healing delay (p = 0.294), nor scar problems (p = 0.586) were significantly different. However, the volume of the graft was significantly correlated with the duration of the hospital stay (ρ = 0.30; p < 0.01) but not with gait disturbances (ρ = 0.60; p = 0.597). Additionally, when controlling for age (p = 0.841), sex (p = 0.031), ASA class (p = 0.699), preexisting orthopedic handicaps (p = 0.9828), and the volume of the bone graft (p = 0.770), only male sex was associated with the likelihood of suffering gait disturbances (p = 0.031). Conclusions: In conclusion, harvesting bone grafts from the anterior iliac crest for intraoral augmentation is a safe procedure for both young and elderly patients. Although there is some postoperative morbidity, such as gait disturbances, hypesthesia, scar formation, or delayed wound healing at the donor site, rates for these minor complications are low and mostly of short duration. Major complications, such as fractures or incision hernias, are very rare. However, in our study, the volume of the bone graft was associated with a longer stay in hospital, and this should be considered in the planning of iliac crest bone graft procedures.
Assuntos
Ílio , Coleta de Tecidos e Órgãos , Idoso , Transplante Ósseo , Humanos , Masculino , Morbidade , Dor Pós-Operatória , Complicações Pós-Operatórias/epidemiologia , Complicações Pós-Operatórias/etiologia , Estudos RetrospectivosRESUMO
BACKGROUND: A teaching concept, that takes individual learning and personal belongings into account, is called the "sandwich principle." This didactic method is an educational concept that alternates consecutively between individual and collective learning phases during a course. This study aimed to prove whether the application of the sandwich principle in lectures increases the learning outcome compared with classical lectures. METHODS: All participants (n = 64) were randomly allocated into two groups. One group attended a classical face-to-face lecture and the other attended a lecture that was modified according to the sandwich principle, including activating elements. To compare knowledge gain after the lectures, all the participants had to answer a test comprising40 single-choice questions. In addition, the lectures were evaluated. RESULTS: Students attending the sandwich lecture had significantly better scores in the test than those who attending the classical lecture (p < 0.001). The mean test score of the sandwich group was 63.9% [standard deviation (SD) = 10] points and of the control group 50.2% (SD = 13.7 points). Overall, both the class conditions showed good evaluation results; however, students of the sandwich lecture were more satisfied with the lecture format compared with the other group. CONCLUSION: Our study results confirm the thesis that the application of the sandwich principle in lectures increases the learning outcome compared with classical lectures. Even with a big audience, the sandwich design presents a concept that helps maintain high attention levels and addresses individual learning styles.
Assuntos
Fenda Labial , Estudantes de Medicina , Avaliação Educacional , Humanos , Aprendizagem , Palato , EnsinoRESUMO
OBJECTIVE: The aim of this cadaveric study was to measure the transfer accuracy of orthodontic mini-implant placement at the anterior palate depending on tooth-borne or gingiva-borne guide support. MATERIALS AND METHODS: Forty orthodontic mini-implants were placed paramedian in the anterior palate of 20 cadaver heads using tooth-borne (TBG) or gingiva-borne guides (GBG). Placement was planned after superimposition of lateral cephalograms and corresponding plaster models. After mini-implant placement, digital impressions were taken with scanbodies. For the measurement of both linear and angle deviations, virtual planning models and postoperative oral scans were compared using automatic surface registration based on an iterative closest point algorithm. RESULTS: Statistical differences between TBG and GBG were detected for lateral deviations 0.88 mm (SD 0.46) versus 1.65 mm (SD 1.03) (p = .004) and sagittal angular deviations 3.67° (SD 2.25) versus 6.46° (SD 5.5) (p = .043). No differences were found for vertical deviations 2.34 mm (SD 0.74) versus 2.14 mm (SD 0.73) (p = .40) and transverse angular deviations 3.60° (SD 2.89) versus 4.06° (SD 3.04) (p = .62). CONCLUSIONS: The use of surgical guides based on silicone provides sufficient control of orthodontic mini-implant placement and is comparable to CAD/CAM templates. However, when compared with guided dental implantology, the planned mini-implant position is more inaccurate. However, accuracy can be significantly increased by guide extension involving the teeth. Clinical investigations have to prove if the accuracy is sufficient for receiving an orthodontic appliance. CLINICAL RELEVANCE: The use of lateral cephalograms and plaster models for silicone guide construction leads to lower radiation exposure and provides sufficient accuracy for palatal orthodontic mini-implant placement.