An aptamer-mediated base editing platform for simultaneous knockin and multiple gene knockout for allogeneic CAR-T cells generation.

Gene editing technologies hold promise for enabling the next generation of adoptive cellular therapies. In conventional gene editing platforms that rely on nuclease activity, such as clustered regularly interspaced short palindromic repeats CRISPR-associated protein 9 (CRISPR-Cas9), allow efficient introduction of genetic modifications; however, these modifications occur via the generation of DNA double-strand breaks (DSBs) and can lead to unwanted genomic alterations and genotoxicity. Here, we apply a novel modular RNA aptamer-mediated Pin-point base editing platform to simultaneously introduce multiple gene knockouts and site-specific integration of a transgene in human primary T cells. We demonstrate high editing efficiency and purity at all target sites and significantly reduced frequency of chromosomal translocations compared with the conventional CRISPR-Cas9 system. Site-specific knockin of a chimeric antigen receptor and multiplex gene knockout are achieved within a single intervention and without the requirement for additional sequence-targeting components. The ability to perform complex genome editing efficiently and precisely highlights the potential of the Pin-point platform for application in a range of advanced cell therapies.

A Novel CRISPR Interference Effector Enabling Functional Gene Characterization with Synthetic Guide RNAs.

While CRISPR interference (CRISPRi) systems have been widely implemented in pooled lentiviral screening, there has been limited use with synthetic guide RNAs for the complex phenotypic readouts enabled by experiments in arrayed format. Here we describe a novel deactivated Cas9 fusion protein, dCas9-SALL1-SDS3, which produces greater target gene repression than first or second generation CRISPRi systems when used with chemically modified synthetic single guide RNAs (sgRNAs), while exhibiting high target specificity. We show that dCas9-SALL1-SDS3 interacts with key members of the histone deacetylase and Swi-independent three complexes, which are the endogenous functional effectors of SALL1 and SDS3. Synthetic sgRNAs can also be used with in vitro-transcribed dCas9-SALL1-SDS3 mRNA for short-term delivery into primary cells, including human induced pluripotent stem cells and primary T cells. Finally, we used dCas9-SALL1-SDS3 for functional gene characterization of DNA damage host factors, orthogonally to small interfering RNA, demonstrating the ability of the system to be used in arrayed-format screening.

ErCas12a CRISPR-MAD7 for Model Generation in Human Cells, Mice, and Rats.

MAD7 is an engineered class 2 type V-A CRISPR-Cas (Cas12a/Cpf1) system isolated from Eubacterium rectale. Analogous to Cas9, it is an RNA-guided nuclease with demonstrated gene editing activity in Escherichia coli and yeast cells. Here, we report that MAD7 is capable of generating indels and fluorescent gene tagging of endogenous genes in human HCT116 and U2OS cancer cell lines, respectively. In addition, MAD7 is highly proficient in generating indels, small DNA insertions (23 bases), and larger integrations ranging from 1 to 14 kb in size in mouse and rat embryos, resulting in live-born transgenic animals. Due to the different protospacer adjacent motif requirement, small-guide RNA, and highly efficient targeted gene disruption and insertions, MAD7 can expand the CRISPR toolbox for genome enginnering across different systems and model organisms.

CRISPR-mediated transcriptional activation with synthetic guide RNA.

The CRISPR-Cas9 system has been adapted for transcriptional activation (CRISPRa) and several second-generation CRISPRa systems (including VPR, SunTag, and SAM) have been developed to recruit different transcriptional activators to a deactivated Cas9, which is guided to a transcriptional start site via base complementarity with a target guide RNA. Multiple studies have shown the benefit of CRISPRa using plasmid or lentiviral expressed guide RNA, but the use of synthetic guide RNA has not been reported. Here we demonstrate the effective use of synthetic guide RNA for gene activation via CRISPRa. CRISPRa crRNA may be used with a canonical tracrRNA using the VPR or SunTag activation systems or with an extended tracrRNA containing an aptamer sequence for the SAM system. Transcriptional activation with synthetic crRNA:tracrRNA is comparable to activation achieved with expression vectors and combining several crRNA sequences targeting the same gene can enhance transcriptional activation. The use of synthetic crRNA is also ideal for simultaneous activation of multiple genes or use with dCas9-VPR mRNA when viral transduction is not feasible. Here, we perform a proof-of-principle arrayed screen using a CRISPRa crRNA library consisting of 153 cytokine receptor targets to identify regulators of IL-6 cytokine secretion. Together, these results demonstrate the suitability of synthetic CRISPRa guide RNA for high throughput, arrayed screening applications which allow for more complex phenotypic readouts to complement viability and drug resistance assays typically used in a pooled screening format.

Lactobacillus gasseri CRISPR-Cas9 characterization In Vitro reveals a flexible mode of protospacer-adjacent motif recognition.

While the CRISPR-Cas9 system from S. pyogenes is a powerful genome engineering tool, additional programmed nucleases would enable added flexibility in targeting space and multiplexing. Here, we characterized a CRISPR-Cas9 system from L. gasseri and found that it has modest activity in a cell-free lysate assay but no activity in mammalian cells even when altering promoter, position of tag sequences and NLS, and length of crRNA:tracrRNA. In the lysate assay we tested over 400 sequential crRNA target sequences and found that the Lga Cas9 PAM is NNGA/NDRA, different than NTAA predicted from the native bacterial host. In addition, we found multiple instances of consecutive crRNA target sites, indicating flexibility in either PAM sequence or distance from the crRNA target site. This work highlights the need for characterization of new CRISPR systems and highlights the non-triviality of porting them into eukaryotes as gene editing tools.

High-content analysis screening for cell cycle regulators using arrayed synthetic crRNA libraries.

The CRISPR-Cas9 system has been utilized for large-scale, loss-of-function screens mainly using lentiviral pooled formats and cell-survival phenotypic assays. Screening in an arrayed format expands the types of phenotypic readouts that can be used to now include high-content, morphology-based assays, and with the recent availability of synthetic crRNA libraries, new studies are emerging. Here, we use a cell cycle reporter cell line to perform an arrayed, synthetic crRNA:tracrRNA screen targeting 169 genes (>600 crRNAs) and used high content analysis (HCA) to identify genes that regulate the cell cycle. Seven parameters were used to classify cells into cell cycle categories and multiple parameters were combined using a new analysis technique to identify hits. Comprehensive hit follow-up experiments included target gene expression analysis, confirmation of DNA insertions/deletions, and validation with orthogonal reagents. Our results show that most hits had three or more independent crRNAs per gene that demonstrated a phenotype with consistent individual parameters, indicating that our screen produced high-confidence hits with low off-target effects and allowed us to identify hits with more subtle phenotypes. The results of our screen demonstrate the power of using arrayed, synthetic crRNAs for functional phenotypic screening using multiparameter HCA assays.

Versatility of chemically synthesized guide RNAs for CRISPR-Cas9 genome editing.

The CRISPR-Cas9 system has become the most popular and efficient method for genome engineering in mammalian cells. The Streptococcus pyogenes Cas9 nuclease can function with two types of guide RNAs: the native dual crRNA and tracrRNA (crRNA:tracrRNA) or a chimeric single guide RNA (sgRNA). Although sgRNAs expressed from a DNA vector are predominant in the literature, guide RNAs can be rapidly generated by chemical synthesis and provide equivalent functionality in gene editing experiments. This review highlights the attributes and advantages of chemically synthesized guide RNAs including the incorporation of chemical modifications to enhance gene editing efficiencies in certain applications. The use of synthetic guide RNAs is also uniquely suited to genome-scale high throughput arrayed screening, particularly when using complex phenotypic assays for functional genomics studies. Finally, the use of synthetic guide RNAs along with DNA-free sources of Cas9 (mRNA or protein) allows for transient CRISPR-Cas9 presence in the cell, thereby resulting in a decreased probability of off-target events.

The Power Decoder Simulator for the Evaluation of Pooled shRNA Screen Performance.

RNA interference screening using pooled, short hairpin RNA (shRNA) is a powerful, high-throughput tool for determining the biological relevance of genes for a phenotype. Assessing an shRNA pooled screen's performance is difficult in practice; one can estimate the performance only by using reproducibility as a proxy for power or by employing a large number of validated positive and negative controls. Here, we develop an open-source software tool, the Power Decoder simulator, for generating shRNA pooled screening experiments in silico that can be used to estimate a screen's statistical power. Using the negative binomial distribution, it models both the relative abundance of multiple shRNAs within a single screening replicate and the biological noise between replicates for each individual shRNA. We demonstrate that this simulator can successfully model the data from an actual laboratory experiment. We then use it to evaluate the effects of biological replicates and sequencing counts on the performance of a pooled screen, without the necessity of gathering additional data. The Power Decoder simulator is written in R and Python and is available for download under the GNU General Public License v3.0.

Systematic analysis of CRISPR-Cas9 mismatch tolerance reveals low levels of off-target activity.

The discovery that the bacterial clustered regularly interspaced short palindromic repeats (CRISPR)-CRISPR-associated protein 9 (Cas9) acquired immune system can be utilized to create double-strand breaks (DSBs) in eukaryotic genomes has resulted in the ability to create genomic changes more easily than with other genome engineering techniques. While there is significant potential for the CRISPR-Cas9 system to advance basic and applied research, several unknowns remain, including the specificity of the RNA-directed DNA cleavage by the small targeting RNA, the CRISPR RNA (crRNA). Here we describe a novel synthetic RNA approach that allows for high-throughput gene editing experiments. This was used with a functional assay for protein disruption to perform high-throughput analysis of crRNA activity and specificity. We performed a comprehensive test of target cleavage using crRNAs that contain one and two nucleotide mismatches to the DNA target in the 20mer targeting region of the crRNA, allowing for the evaluation of hundreds of potential mismatched target sites without the requirement for the off-target sequences and their adjacent PAMs to be present in the genome. Our results demonstrate that while many crRNAs are functional, less than 5% of crRNAs with two mismatches to their target are effective in gene editing; this suggests an overall high level of functionality but low level of off-targeting.

Optimized PCR conditions and increased shRNA fold representation improve reproducibility of pooled shRNA screens.

RNAi screening using pooled shRNA libraries is a valuable tool for identifying genetic regulators of biological processes. However, for a successful pooled shRNA screen, it is imperative to thoroughly optimize experimental conditions to obtain reproducible data. Here we performed viability screens with a library of ∼10,000 shRNAs at two different fold representations (100- and 500-fold at transduction) and report the reproducibility of shRNA abundance changes between screening replicates determined by microarray and next generation sequencing analyses. We show that the technical reproducibility between PCR replicates from a pooled screen can be drastically improved by ensuring that PCR amplification steps are kept within the exponential phase and by using an amount of genomic DNA input in the reaction that maintains the average template copies per shRNA used during library transduction. Using these optimized PCR conditions, we then show that higher reproducibility of biological replicates is obtained by both microarray and next generation sequencing when screening with higher average shRNA fold representation. shRNAs that change abundance reproducibly in biological replicates (primary hits) are identified from screens performed with both 100- and 500-fold shRNA representation, however a higher percentage of primary hit overlap between screening replicates is obtained from 500-fold shRNA representation screens. While strong hits with larger changes in relative abundance were generally identified in both screens, hits with smaller changes were identified only in the screens performed with the higher shRNA fold representation at transduction.

Functional inactivation of the mouse nucleolar protein Bop1 inhibits multiple steps in pre-rRNA processing and blocks cell cycle progression.

Bop1 is a conserved nucleolar protein involved in rRNA processing and ribosome assembly in eukaryotes. Expression of its dominant-negative mutant Bop1 Delta in mouse cells blocks rRNA maturation and synthesis of large ribosomal subunits and induces a reversible, p53-dependent cell cycle arrest. In this study, we have conducted a deletion analysis of Bop1 and identified a new mutant, Bop1N2, that also acts as a potent inhibitor of cell cycle progression. Bop1N2 and Bop1 Delta are C-terminal and N-terminal deletion mutants, respectively, and share only 72 amino acid residues. Both mutant proteins are localized to the nucleolus and strongly inhibit rRNA processing, suggesting that activation of a cell cycle checkpoint by Bop1 mutants is linked to their inhibitory effects on rRNA and ribosome synthesis. By using these dominant-negative mutants as well as antisense oligonucleotides to interfere with endogenous Bop1, we identified specific rRNA processing steps that require Bop1 function in mammalian cells. Our data demonstrate that Bop1 is required for proper processing at four distinct sites located within the internal transcribed spacers ITS1 and ITS2 and the 3' external spacer. We propose a model in which Bop1 serves as an essential factor in ribosome formation that coordinates processing of the spacer regions in pre-rRNA.

Initiation of DNA replication in multicellular eukaryotes.

Three questions central to understanding the initiation of DNA replication in eukaryotes are: (1) Does DNA synthesis begin at a defined place? (2) What determines replication initiation sites? (3) What regulates an origin to fire only once per cell cycle? A key player in this is the origin recognition complex (ORC), required for assembly of the pre-replication complex (pre-RC), that is converted later to the initiation complex (IC). In both yeast ARS1 and DNA puff II/9A of the metazoan fly Sciara, there is a defined start site of replication adjacent to an ORC-binding site. Although ORC has some inherent preference for certain DNA sequences, other factors may also modulate its binding to DNA. The preferred site where DNA synthesis starts at Sciara II/9A and the boundaries of the initiation zone change during development, when DNA puff amplification occurs. The position of the initiation zone may be influenced by the transcriptional machinery and/or chromatin structure. With regard to the third question, rereplication of the whole genome in yeast occurs when components of the pre-RC are stabilized by mutation. In contrast, a locus-specific amplification factor probably exists to account for site-specific DNA amplification in flies.