RESUMO
Although recent years have seen significant advances in the spatial resolution possible in the transmission electron microscope (TEM), the temporal resolution of most microscopes is limited to video rate at best. This lack of temporal resolution means that our understanding of dynamic processes in materials is extremely limited. High temporal resolution in the TEM can be achieved, however, by replacing the normal thermionic or field emission source with a photoemission source. In this case the temporal resolution is limited only by the ability to create a short pulse of photoexcited electrons in the source, and this can be as short as a few femtoseconds. The operation of the photo-emission source and the control of the subsequent pulse of electrons (containing as many as 5 x 10(7) electrons) create significant challenges for a standard microscope column that is designed to operate with a single electron in the column at any one time. In this paper, the generation and control of electron pulses in the TEM to obtain a temporal resolution <10(-6)s will be described and the effect of the pulse duration and current density on the spatial resolution of the instrument will be examined. The potential of these levels of temporal and spatial resolution for the study of dynamic materials processes will also be discussed.
RESUMO
BACKGROUND AND OBJECTIVE: The purpose of this study was to evaluate the ablation of ossicular tissue using a 1,053 nm Ti:Sapphire chirped pulse amplifier laser system configured to deliver ultrashort pulses of 350 femtoseconds (fs) (3.5x10(-13) seconds) in cadaver temporal bone. STUDY DESIGN/MATERIALS AND METHODS: Ablation of the formalin-fixed incus and stapes was performed using an ultrashort pulse laser (USPL) (0.4 mm beam diameter, pulse fluence of 2.0 J/cm2, and pulse repetition rate of 10 Hz). The ablation rate was measured using optical micrometry, and crater surface morphology examined using scanning electron microscopy. RESULTS: The laser produced precise bone ablation at a rate of 1.26 microm/pulse, with almost no evidence of thermal damage, and very little evidence of photomechanical injury. CONCLUSIONS: Ultrashort pulse lasers may provide a useful clinical tool for otologic and skull base surgery, where precise hard tissue ablation is required adjacent to critical structures.