Negative mixing enthalpy solid solutions deliver high strength and ductility.

Body-centred cubic refractory multi-principal element alloys (MPEAs), with several refractory metal elements as constituents and featuring a yield strength greater than one gigapascal, are promising materials to meet the demands of aggressive structural applications1-6. Their low-to-no tensile ductility at room temperature, however, limits their processability and scaled-up application7-10. Here we present a HfNbTiVAl10 alloy that shows remarkable tensile ductility (roughly 20%) and ultrahigh yield strength (roughly 1,390 megapascals). Notably, these are among the best synergies compared with other related alloys. Such superb synergies derive from the addition of aluminium to the HfNbTiV alloy, resulting in a negative mixing enthalpy solid solution, which promotes strength and favours the formation of hierarchical chemical fluctuations (HCFs). The HCFs span many length scales, ranging from submicrometre to atomic scale, and create a high density of diffusive boundaries that act as effective barriers for dislocation motion. Consequently, versatile dislocation configurations are sequentially stimulated, enabling the alloy to accommodate plastic deformation while fostering substantial interactions that give rise to two unusual strain-hardening rate upturns. Thus, plastic instability is significantly delayed, which expands the plastic regime as ultralarge tensile ductility. This study provides valuable insights into achieving a synergistic combination of ultrahigh strength and large tensile ductility in MPEAs.

In Situ Pt Migration Enabled Resurrection of Electrocatalyst and Fuel Cell Device.

In direct methanol fuel cells (DMFCs), the poisoning of noble metals is considered to be a major impediment to their commercial development. Here, it is found that the loss of surface Pt is one main reason for the attenuation of catalyst performance during long-time methanol oxidation reaction (MOR). A strategy to realize in situ resurrection of the deactivated catalyst by migrating Pt atoms inside to the surface is innovatively proposed. A high-activity Pt-SnO2 is designed, whose MOR activity is resurrected to 97.4% of the initial value. Based on this, the multiple resurrection of a DMFC device is also achieved for the first time. This work provides a new approach for the solution of catalyst deactivation and the development of sustainable catalysts as well as fuel cells.

BEX1 supports the stemness of hepatoblastoma by facilitating Warburg effect in a PPARγ/PDK1 dependent manner.

BACKGROUND: Hepatoblastoma (HB) is a highly aggressive paediatric malignancy that exhibits a high presence of cancer stem cells (CSCs), which related to tumour recurrence and chemotherapy resistance. Brain expressed X-linked protein 1 (BEX1) plays a pivotal role in ciliogenesis, axon regeneration and differentiation of neural stem cells. However, the role of BEX1 in metabolic and stemness programs in HB remains unclear. METHODS: BEX1 expression in human and mouse HB was analyzed using gene expression profile data from NCBI GEO and immunohistochemical validation. Seahorse extracellular flux analyzer, ultra-high-performance liquid-chromatography mass spectrometry (LC-MS), flow cytometry, qRT-PCR, Western Blot, sphere formation assay, and diluted xenograft tumour formation assay were used to analyze metabolic and stemness features. RESULTS: Our results indicated that overexpression of BEX1 significantly enhanced the Warburg effect in HB cells. Furthermore, glycolysis inhibition largely attenuated the effects of BEX1 on HB cell growth and self-renewal, suggesting that BEX1 promotes stemness maintenance of HB cells by regulating the Warburg effect. Mechanistically, BEX1 enhances Warburg effect through the downregulation of peroxisome proliferator-activated receptor-gamma (PPARγ). Furthermore, pyruvate dehydrogenase kinase isozyme 1 (PDK1) is required for PPARγ-induced inhibition of Warburg effect in HB. In addition, BEX1 supports the stemness of HB by enhancing Warburg effect in a PPARγ/PDK1 dependent manner. CONCLUSIONS: HB patients with high BEX1 and PDK1 expression had a poor prognosis. BEX1 promotes the stemness maintenance of HB cells via modulating the Warburg effect, which depends on PPARγ/PDK1 axis. Pioglitazone could be used to target BEX1-mediated stemness properties in HB by upregulating PPARγ.

Dual-phase nanostructuring as a route to high-strength magnesium alloys.

It is not easy to fabricate materials that exhibit their theoretical 'ideal' strength. Most methods of producing stronger materials are based on controlling defects to impede the motion of dislocations, but such methods have their limitations. For example, industrial single-phase nanocrystalline alloys and single-phase metallic glasses can be very strong, but they typically soften at relatively low strains (less than two per cent) because of, respectively, the reverse Hall-Petch effect and shear-band formation. Here we describe an approach that combines the strengthening benefits of nanocrystallinity with those of amorphization to produce a dual-phase material that exhibits near-ideal strength at room temperature and without sample size effects. Our magnesium-alloy system consists of nanocrystalline cores embedded in amorphous glassy shells, and the strength of the resulting dual-phase material is a near-ideal 3.3 gigapascals-making this the strongest magnesium-alloy thin film yet achieved. We propose a mechanism, supported by constitutive modelling, in which the crystalline phase (consisting of almost-dislocation-free grains of around six nanometres in diameter) blocks the propagation of localized shear bands when under strain; moreover, within any shear bands that do appear, embedded crystalline grains divide and rotate, contributing to hardening and countering the softening effect of the shear band.

Attractive Electron Delocalization Behavior of FeCoMoPB Amorphous Nanoplates for Highly Efficient Alkaline Water Oxidation.

The rational design of high-performance and cost-effective electrocatalysts to overcome the kinetically sluggish water oxidation reaction is a grand challenge in water electrolysis. Transitional metals with incompletely filled d orbitals are expected to have intrinsic electronic interaction to promote the reaction kinetics, however, the construction of multiple active sites is still a bottleneck problem. Here, inspired by an amorphous alloy design strategy with chemical tunability, a noble-metal-free FeCoMoPB amorphous nanoplate for superior alkaline water oxidation is developed. The achieved overpotentials at current densities of 10, 100, and 500 mA cm-2 are 239, 281, and 331 mV, respectively, while retaining a reliable stability of 48 h, outperforming most currently available electrocatalysts. Experimental and theoretical results reveal that the chemical complexity of the amorphous nanoplate leads to the formation of multiple active sites that is able to greatly lower the free energy of the rate-determining step during the water oxidation reaction. Moreover, the Mo element would result in an electron delocalization behavior to promote electron redistribution at its surrounding regions for readily donating and taking electrons. This amorphous alloy design strategy is expected to stimulate the development of more efficient electrocatalysts that is applicable in energy devices, such as metal-air batteries, fuel cells, and water electrolysis.

DNMT1-mediated methylation of BEX1 regulates stemness and tumorigenicity in liver cancer.

BACKGROUND & AIMS: Hepatoblastoma (HB) and hepatocellular carcinoma (HCC) both exhibit notable cancer stem cell (CSC) features. Moreover, the development of both diseases is closely associated with the presence of CSCs. We investigated the role of brain-expressed X-linked protein 1 (BEX1) in regulating the CSC properties of HB and a subtype of HCC with high CSC features (CSC-HCC). METHODS: Stemness scores were analyzed in 5 murine HCC models. A subpopulation of BEX1-positive cells and BEX1-negative cells were sorted from HCC cell lines, and subjected to transcriptome analysis. The expression and function of BEX1 was examined via western blotting, sphere formation assays, and xenograft tumor models. RESULTS: We identified BEX1 as a novel CSC marker that was required for the self-renewal of liver CSCs. Furthermore, zebularine, a potent DNMT1 inhibitor, can induce the reactivation of BEX1 by removing epigenetic inhibition. Notably, BEX1 was highly expressed in patients with HB and CSC-HCC, but not in patients with non-CSC HCC. Moreover, DNMT1-mediated methylation of the BEX1 promoter resulted in differential BEX1 expression patterns in patients with HB, CSC-HCC, and non-CSC-HCC. Mechanistically, BEX1 interacted with RUNX3 to block its inhibition of ß-catenin transcription, which led to the activation of Wnt/ß-catenin signaling, and stemness maintenance in both HB and CSC-HCC. In contrast, downregulated BEX1 expression released RUNX3 and inhibited the activation of Wnt/ß-catenin signaling in non-CSC-HCC. CONCLUSION: BEX1, under the regulation of DNMT1, is necessary for the self-renewal and maintenance of liver CSCs through activation of Wnt/ß-catenin signaling, rendering BEX1 a potentially valuable therapeutic target in both HB and CSC-HCC. LAY SUMMARY: Cancer stem cells (CSCs) contribute to a high rate of cancer recurrence, as well as resistance to conventional therapies. However, the regulatory mechanisms underlying their self-renewal remains elusive. Herein, we have reported that BEX1 plays a key role in regulating CSC properties in different types of liver cancer. Targeting BEX1-mediated Wnt/ß-catenin signaling may help to address the high rate of recurrence, and heterogeneity of liver cancer.

Integrity and Collaboration in Dynamic Sensor Networks.

Global Navigation Satellite Systems (GNSS) deliver absolute position and velocity, as well as time information (P, V, T). However, in urban areas, the GNSS navigation performance is restricted due to signal obstructions and multipath. This is especially true for applications dealing with highly automatic or even autonomous driving. Subsequently, multi-sensor platforms including laser scanners and cameras, as well as map data are used to enhance the navigation performance, namely in accuracy, integrity, continuity and availability. Although well-established procedures for integrity monitoring exist for aircraft navigation, for sensors and fusion algorithms used in automotive navigation, these concepts are still lacking. The research training group i.c.sens, integrity and collaboration in dynamic sensor networks, aims to fill this gap and to contribute to relevant topics. This includes the definition of alternative integrity concepts for space and time based on set theory and interval mathematics, establishing new types of maps that report on the trustworthiness of the represented information, as well as taking advantage of collaboration by improved filters incorporating person and object tracking. In this paper, we describe our approach and summarize the preliminary results.

Effects of a Tai Chi rehabilitation program implemented using a hybrid online and offline mode on oxidative stress and inflammatory responses in patients with coronary heart disease: a randomized controlled trial.

Background: Coronary heart disease (CHD) is the leading cause of death in both developed and many developing countries. Exercise training is a fundamental component of cardiac rehabilitation programs for patients with CHD. This study aims to investigate the effects of a Tai Chi rehabilitation program, which is provided through a hybrid online and offline mode, on oxidative stress and inflammatory responses in patients with CHD. Methods: A total of 34 patients with coronary heart disease were randomly assigned to two groups: an experiment group (n = 14, age 62.07 ± 9.076 years) and a control group (n = 20, age 61.90 ± 9.700 years). The experiment group underwent a 12-week Tai Chi cardiac rehabilitation program (TCCRP), while the control group followed a conventional exercise rehabilitation program (CERP) consisting of 1-h sessions, 3 times per week, for a total of 36 sessions. Participants were studied at baseline and post-intervention. The main assessments include the levels of Malondialdehyde (MDA), Superoxide dismutase (SOD), Tumor necrosis factor (TNF-α) and Interleukin-10 (IL - 10) in blood samples. Pearson correlation analysis was used, and the differences between the two groups were subsequently tested using two-way repeated ANOVA. Statistical significance was defined as a two-sided p-value of <0.05. Results: The key finding of the study reveals that MDA was significantly reduced by 1.027 nmoL/mL. Additionally, the TCCRP showed significant improvements in SOD and IL-10, with values of 10.110 U/mL and 2.441 pg./mL, respectively. Notably, a significant positive correlation was found between SOD and IL-10 (r = 0.689, p = 0.006), while MDA showed a significant positive correlation with TNF-a (r = 0.542, p = 0.045). In contrast, the ECRP group only showed a significant improvement in SOD. Conclusion: The study conducted a 12-week program on TCCRP, which utilized a hybrid online and offline model for individuals with coronary heart disease. The program showed promising results in alleviating oxidative stress and inflammation, possibly by regulating the balance between oxidative and antioxidative factors, as well as pro-inflammatory and anti-inflammatory factors.

A Molecular Dynamics Study on the Dislocation-Precipitate Interaction in a Nickel Based Superalloy during the Tensile Deformation.

In the present paper, the dislocation-precipitate interaction in the Inconel 718 superalloy is studied by means of molecular dynamics simulation. The atomistic model composed of the ellipsoidal Ni3Nb precipitate (γ″ phase) and the Ni matrix is constructed, and tensile tests on the composite Ni3Nb@Ni system along different loading directions are simulated. The dislocation propagation behaviors in the precipitate interior and at the surface of the precipitate are characterized. The results indicate that the dislocation shearing and bypassing simultaneously occur during plastic deformation. The contact position of the dislocation on the surface of the precipitate could affect the penetration depth of the dislocation. The maximum obstacle size, allowing for the dislocation shearing on the slip planes, is found to be close to 20 nm. The investigation of anisotropic plastic deformation behavior shows that the composite system under the loading direction along the major axis of the precipitate experiences stronger shear strain localizations than that with the loading direction along the minor axis of the precipitate. The precipitate size effect is quantified, indicating that the larger the precipitate, the lower the elastic limit of the flow stress of the composite system. The dislocation accumulations in the precipitate are also examined with the dislocation densities given on specific slip systems. These findings provide atomistic insights into the mechanical behavior of nickel-based superalloys with nano-precipitates.

Defect Engineering of a High-Entropy Metallic Glass Surface for High-Performance Overall Water Splitting at Ampere-Level Current Densities.

Platinum-based electrocatalysts possess high water electrolysis activity and are essential components for hydrogen evolution reaction (HER). A major challenge, however, is how to break the cost-efficiency trade-off. Here, a novel defect engineering strategy is presented to construct a nanoporous (FeCoNiB0.75 )97 Pt3 (atomic %) high-entropy metallic glass (HEMG) with a nanocrystalline surface structure that contains large amounts of lattice distortion and stacking faults to achieve excellent electrocatalytic performance using only 3 at% of Pt. The defect-rich HEMG achieves ultralow overpotentials at ampere-level current density of 1000 mA cm-2 for HER (104 mV) and oxygen evolution reaction (301 mV) under alkaline conditions, while retains a long-term durability exceeding 200 h at 100 mA cm-2 . Moreover, it only requires 81 and 122 mV to drive the current densities of 1000 and 100 mA cm-2 for HER under acidic and neutral conditions, respectively. Modelling results reveal that lattice distortion and stacking fault defects help to optimize atomic configuration and modulate electronic interaction, while the surface nanoporous architecture provides abundant active sites, thus synergistically contributing to the reduced energy barrier for water electrolysis. This defect engineering approach combined with a HEMG design strategy is expected to be widely applicable for development of high-performance alloy catalysts.

Influence of Defect Number, Distribution Continuity and Orientation on Tensile Strengths of the CNT-Based Networks: A Molecular Dynamics Study.

Networks based on carbon nanotube (CNT) have been widely utilized to fabricate flexible electronic devices, but defects inevitably exist in these structures. In this study, we investigate the influence of the CNT-unit defects on the mechanical properties of a honeycomb CNT-based network, super carbon nanotube (SCNT), through molecular dynamics simulations. Results show that tensile strengths of the defective SCNTs are affected by the defect number, distribution continuity and orientation. Single-defect brings 0 ~ 25% reduction of the tensile strength with the dependency on defect position and the reduction is over 50% when the defect number increases to three. The distribution continuity induces up to 20% differences of tensile strengths for SCNTs with the same defect number. A smaller arranging angle of defects to the tensile direction leads to a higher tensile strength. Defective SCNTs possess various modes of stress concentration with different concentration degrees under the combined effect of defect number, arranging direction and continuity, for which the underlying mechanism can be explained by the effective crack length of the fracture mechanics. Fundamentally, the force transmission mode of the SCNT controls the influence of defects and the cases that breaking more force transmission paths cause larger decreases of tensile strengths. Defects are non-negligible factors of the mechanical properties of CNT-based networks and understanding the influence of defects on CNT-based networks is valuable to achieve the proper design of CNT-based electronic devices with better performances.

Nanoscale Heterogeneities of Non-Noble Iron-Based Metallic Glasses toward Efficient Water Oxidation at Industrial-Level Current Densities.

Scaling up the production of cost-effective electrocatalysts for efficient water splitting at the industrial level is critically important to achieve carbon neutrality in our society. While noble-metal-based materials represent a high-performance benchmark with superb activities for hydrogen and oxygen evolution reactions, their high cost, poor scalability, and scarcity are major impediments to achieve widespread commercialization. Herein, a flexible freestanding Fe-based metallic glass (MG) with an atomic composition of Fe50Ni30P13C7 was prepared by a large-scale metallurgical technique that can be employed directly as a bifunctional electrode for water splitting. The surface hydroxylation process created unique structural and chemical heterogeneities in the presence of amorphous FeOOH and Ni2P as well as nanocrystalline Ni2P that offered various active sites to optimize each rate-determining step for water oxidation. The achieved overpotentials for the oxygen evolution reaction were 327 and 382 mV at high current densities of 100 and 500 mA cm-2 in alkaline media, respectively, and a cell voltage of 1.59 V was obtained when using the MG as both the anode and the cathode for overall water splitting at a current density of 10 mA cm-2. Theoretical calculations unveiled that amorphous FeOOH makes a significant contribution to water molecule adsorption and oxygen evolution processes, while the amorphous and nanocrystalline Ni2P stabilize the free energy of hydrogen protons (ΔGH*) in the hydrogen evolution process. This MG alloy design concept is expected to stimulate the discovery of many more high-performance catalytic materials that can be produced at an industrial scale with customized properties in the near future.

Two-dimensional mineral hydrogel-derived single atoms-anchored heterostructures for ultrastable hydrogen evolution.

Hydrogen energy is critical for achieving carbon neutrality. Heterostructured materials with single metal-atom dispersion are desirable for hydrogen production. However, it remains a great challenge to achieve large-scale fabrication of single atom-anchored heterostructured catalysts with high stability, low cost, and convenience. Here, we report single iron (Fe) atom-dispersed heterostructured Mo-based nanosheets developed from a mineral hydrogel. These rationally designed nanosheets exhibit excellent hydrogen evolution reaction (HER) activity and reliability in alkaline condition, manifesting an overpotential of 38.5 mV at 10 mA cm-2, and superior stability without performance deterioration over 600 h at current density up to 200 mA cm-2, superior to most previously reported non-noble-metal electrocatalysts. The experimental and density functional theory results reveal that the O-coordinated single Fe atom-dispersed heterostructures greatly facilitated H2O adsorption and enabled effective adsorbed hydrogen (H*) adsorption/desorption. The green, scalable production of single-atom-dispersed heterostructured HER electrocatalysts reported here is of great significance in promoting their large-scale implementation.

Role of Boron in Enhancing Electron Delocalization to Improve Catalytic Activity of Fe-Based Metallic Glasses for Persulfate-Based Advanced Oxidation.

Metallic glasses (MGs) with superior catalytic performance have recently been recognized as attractive candidates for wastewater treatment. However, further improving their performance will require knowledge of how to precisely regulate their electronic structures via compositional control. Here, two Fe-based MGs (Fe78Si9B13 and Fe80Si9B11) were prepared to compare how slightly altering boron content affected their electronic structure and catalytic performance. Density functional theory revealed that the Fe78Si9B13 MG with 2 atom % higher boron exhibits an attractive electron delocalization, a high persulfate adsorption energy, and a superb work function due to precise regulation of the electronic structure, leading to exceptional degradation performance for seven organic pollutants. Furthermore, it can be reused 23 times without significant deterioration of catalytic performance, amorphous structure, and surface morphology. This work provides a new paradigm for the fundamental theory explaining how electronic structure is controlled by composition, creating a solid foundation to explore novel catalysts for water treatment.

A Novel Multinary Intermetallic as an Active Electrocatalyst for Hydrogen Evolution.

Electrochemical water splitting offers an attractive approach for hydrogen production. However, the lack of high-performance cost-effective electrocatalyst severely hinders its applications. Here, a multinary high-entropy intermetallic (HEI) that possesses an unusual periodically ordered structure containing multiple non-noble elements is reported, which can serve as a highly efficient electrocatalyst for hydrogen evolution. This HEI exhibits excellent activities in alkalinity with an overpotential of 88.2 mV at a current density of 10 mA cm-2 and a Tafel slope of 40.1 mV dec-1 , which are comparable to those of noble catalysts. Theoretical calculations reveal that the chemical complexity and surprising atomic configurations provide a strong synergistic function to alter the electronic structure. Furthermore, the unique L12 -type ordered structure enables a specific site-isolation effect to further stabilize the H2 O/H* adsorption/desorption, which dramatically optimizes the energy barrier of hydrogen evolution. Such an HEI strategy uncovers a new paradigm to develop novel electrocatalyst with superior reaction activities.

Hierarchical nanostructured aluminum alloy with ultrahigh strength and large plasticity.

High strength and high ductility are often mutually exclusive properties for structural metallic materials. This is particularly important for aluminum (Al)-based alloys which are widely commercially employed. Here, we introduce a hierarchical nanostructured Al alloy with a structure of Al nanograins surrounded by nano-sized metallic glass (MG) shells. It achieves an ultrahigh yield strength of 1.2 GPa in tension (1.7 GPa in compression) along with 15% plasticity in tension (over 70% in compression). The nano-sized MG phase facilitates such ultrahigh strength by impeding dislocation gliding from one nanograin to another, while continuous generation-movement-annihilation of dislocations in the Al nanograins and the flow behavior of the nano-sized MG phase result in increased plasticity. This plastic deformation mechanism is also an efficient way to decrease grain size to sub-10 nm size for low melting temperature metals like Al, making this structural design one solution to the strength-plasticity trade-off.

An ordinary state-based peridynamic model for the fracture of zigzag graphene sheets.

This study develops an ordinary state-based peridynamic coarse-graining (OSPD-CG) model for the investigation of fracture in single-layer graphene sheets (SLGS), in which the peridynamic (PD) parameters are derived through combining the PD model and molecular dynamics (MD) simulations from the fully atomistic system via energy conservation. The fracture failure of pre-cracked SLGS under uniaxial tension is studied using the proposed PD model. And the PD simulation results agree well with those from MD simulations, including the stress-strain relations, the crack propagation patterns and the average crack propagation velocities. The interaction effect between cracks located at the centre and the edge on the crack propagation of the pre-cracked SLGS is discussed in detail. This work shows that the proposed PD model is much more efficient than the MD simulations and, thus, indicates that the PD-based method is applicable to study larger nanoscale systems.

[Role of SIRT1 in the protection of intestinal epithelial barrier under hypoxia and its mechanism].

OBJECTIVE: To observe the effect of SIRT1 on intestinal barrier function of epithelial Caco-2 cells under hypoxia and investigate its mechanism. METHODS: Caco-2 cells were randomly divided into three groups: normoxia group (Nx), hypoxia group (Hx,1%O2 for 6 h) and hypoxia plus 40 µmol/L Resveratrol (agonist of SIRT1) group (Hx+Res). Transepithelial electrical resistance (TER) was determined. mRNA and protein expressions of SIRT1 and tight junctions (ZO-1, Occludin, Claudin-1) were examined by reverse transcription-polymerase chain reaction (RT-PCR) and Western blotting. RESULTS: Both mRNA and protein expressions of SIRT1 were significantly reduced in Hx group as compared with Nx group (0.40±0.02 vs. 0.70±0.07, P=0.001; 0.37±0.03 vs. 0.76±0.03, P=0.001). The mRNA and protein expressions of SIRT1 were significantly increased in Hx+Res group as compared with Hx group(0.50±0.02 vs. 0.40±0.02, P=0.026; 0.54±0.02 vs. 0.37±0.03, P=0.011). The expression levels of ZO-1, Occludin and Claudin-1 in Hx group were lower than those in Nx group (P<0.05), however, pretreatment with Resveratrol could attenuate the decreased expression of above 3 molecules under hypoxia(P<0.05). TERs of Nx group, Hx group and Hx+Res group were (142±7) Ohm/cm(2), (94±3) Ohm/cm(2) and (119±7) Ohm/cm(2) respectively. Compare with the Nx group, the TER of Hx group was significantly decreased(P<0.05). TER of Hx+Res group was significantly increased compare with Hx group, but it was still significantly lower than that in Nx group(P<0.05). CONCLUSIONS: Expression of SIRT1 is significantly reduced under hypoxia. Activation of SIRT1 can maintain the epithelial barrier function through regulating the expression of tight junctions under hypoxia.

Interferon-γ-induced intestinal epithelial barrier dysfunction by NF-κB/HIF-1α pathway.

Interferon-γ (IFN-γ) plays an important role in intestinal barrier dysfunction. However, the mechanisms are not fully understood. As hypoxia-inducible factor-1 (HIF-1) is a critical determinant response to hypoxia and inflammation, which has been shown to be deleterious to intestinal barrier function, we hypothesized that IFN-γ induces loss of barrier function through the regulation of HIF-1α activation and function. In this study, we detected the expressions of HIF-1α and tight junction proteins in IFN-γ-treated T84 intestinal epithelial cell line. IFN-γ led to an increase of HIF-1α expression in time- and dose-dependent manners but did not change the expression of HIF-1ß. The IFN-γ-induced increase in HIF-1α was associated with an activation of NF-κB. Treatment with the NF-κB inhibitor, pyrolidinedithiocarbamate (PDTC), significantly suppressed the activation of NF-κB and the expression of HIF-1α. In addition, IFN-γ also increased intestinal epithelial permeability and depletion of tight junction proteins; inhibition of NF-κB or HIF-1α prevented the increase in intestinal permeability and alteration in tight junction protein expressions. Interestingly, we demonstrated that a significant portion of IFN-γ activation NF-kB and modulation tight junction expression is mediated through HIF-1α. Taken together, this study suggested that IFN-γ induced the loss of epithelial barrier function and disruption of tight junction proteins, by upregulation of HIF-1α expression through NF-κB pathway.