A-LLTO Nanoparticles Embedded Composite Solid Polymer Electrolyte for Room Temperature Operational Li-metal Batteries.

Solid-state batteries (SSBs) have the potential to revolutionize the current energy storage sector. A significant portion of the current development of electric vehicles and the electrification of various appliances relies on Lithium (Li)-ion batteries. However, future energy demands will require the development of stronger and more reliable batteries. This report presents a novel solid state electrolyte (SSE) composed of a self-healing composite solid polymer electrolyte (CSPE) matrix and aluminum-doped (Li0.33La0.56)1.005Ti0.99Al0.01O3 (A-LLTO) nanofillers. The CSPE contains Jeffamine ED-2003 monomer, Benzene-1,3,5-tricarbaldehyde (BTC) crosslinker dissolved in a 1:1 ratio of Dimethylformamide (DMF) to LiPF6, and a certain amount (x) of A-LLTO nanofillers (x = 5, 7.5, 10, 12.5%). A CSPE containing x-amount of A-LLTO fillers (referred to as CAL-x%) demonstrates excellent ion-conducting properties and stable battery performance. The CAL-10% demonstrates 1.1 × 10-3 S cm-1 of ionic conductivity at room temperature (RT). A-LLTO nanofillers dispersed uniformly within the polymer matrix form a percolation network, which is believed to improve ionic conductivity and the diffusion of Li+ ions. The CR-2032 cell, consisting of LiFePO4 (LFP)║CAL-10%║Li, at RT offers an initial discharge capacity of ≈165 mAh g-1 at 0.1C rate for 120 cycles with 98.85% coulombic efficiency (C.E.).

Interfacial Layer Materials with a Truxene Core for Dopant-Free NiOx -Based Inverted Perovskite Solar Cells.

Nickel oxide (NiOx ) is commonly used as a holetransporting material (HTM) in p-i-n perovskite solar cells. However, the weak chemical interaction between the NiOx and CH3 NH3 PbI3 (MAPbI3 ) interface results in poor crystallinity, ineffective hole extraction, and enhanced carrier recombination, which are the leading causes for the limited stability and power conversion efficiency (PCE). Herein, two HTMs, TRUX-D1 (N2 ,N7 ,N12 -tris(9,9-dimethyl-9H-fluoren-2-yl)-5,5,10,10,15,15-hexaheptyl-N2 ,N7 ,N12 -tris(4-methoxyphenyl)-10,15-dihydro-5H-diindeno[1,2-a:1',2'-c]fluorene-2,7,12-triamine) and TRUX-D2 (5,5,10,10,15,15-hexaheptyl-N2 ,N7 ,N12 -tris(4-methoxyphenyl)-N2 ,N7 ,N12 -tris(10-methyl-10H-phenothiazin-3-yl)-10,15-dihydro-5H-diindeno[1,2-a:1',2'-c]fluorene-2,7,12-triamine), are designed with a rigid planar C3 symmetry truxene core integrated with electron-donating amino groups at peripheral positions. The TRUX-D molecules are employed as effective interfacial layer (IFL) materials between the NiOx and MAPbI3 interface. The incorporation of truxene-based IFLs improves the quality of perovskite crystallinity, minimizes nonradiative recombination, and accelerates charge extraction which has been confirmed by various characterization techniques. As a result, the TRUX-D1 exhibits a maximum PCE of up to 20.8% with an impressive long-term stability. The unencapsulated device retains 98% of their initial performance following 210 days of aging in a glove box and 75.5% for the device after 80 days under ambient air condition with humidity over 40% at 25 °C.

Recent Progress of Helicene Type Hole-Transporting Materials for Perovskite Solar Cells.

Perovskite solar cells have emerged as one of the most promising photovoltaic technologies for future clean energy sources to replace fossil fuels. Among the various components in a perovskite solar cell, the hole-transporting materials play significant roles in boosting device performance and stability. Recently, hole-transporting materials with helicene cores have received much attention due to their unique properties and ability to improve the performance and stability of the perovskite solar cells. The focus of this review is on the emerging special class of HTMs based on helicenes for perovskite solar cells. The optical, electrochemical, thermal and photovoltaic properties of helicene-based small molecules as HTMs or interfacial layer materials in n-i-p or p-i-n type perovskite solar cells are summarized. Finally, perspectives for the future development of helicene type hole-transporting materials are provided.

Solvatochromic Fluorescence of a GFP Chromophore-Containing Organogelator in Solutions and Organogels.

Solvatofluorochromism, a solvation effect on the fluorescence color of an organic dye, is a property generally limited to fluid solutions. We demonstrate herein the concept of solid-state solvatofluorochromism by using an organogelator (1-SG), which consists of a solvatofluorochromic green fluorescence protein (GFP) chromophore (1) and a sugar gelator (SG). While 1-SG could be located in the liquid phase or in the fibrous solid matrix of the SG gel, our results show that the one in the solid matrix but near the liquid interface has superior fluorescence stability and quantum efficiency as well as solvatofluorochromicity than the one in the liquid phase. In addition, the phenomenon of fluorescence turn-on occurs when the gel is formed in protic solvents. These features have been applied to perform multicolor fluorescence patterning, chemical vapor sensing, data encryption and decryption, and real-time fluorescence cell imaging.

Heptacene: Synthesis and Its Hole-Transfer Property in Stable Thin Films.

Heptacene (1) has been produced via a monoketone precursor, 2, which was prepared from 1,2,4,5-tetrabromobenzene in nine steps in a total yield of 10 %. Compound 2 was converted to 1 quantitatively by heating at 202 °C. Heptacene exhibited high thermal stability in the solid state without any observable change over two months. To investigate the potential value of 1 as a material for p-type organic field-effect transistors (OFETs), top-contact OFET devices were fabricated by vacuum deposition of 1 onto a hexamethyldisilazane (HMDS)/SiO2 /Si substrate. The best hole mobility performance was 2.2 cm2  V-1 s-1 . This is the first report of stable heptacene being used in an effective device and examined for its charge carrier properties.

Hydrogen Bonding-Induced H-Aggregation for Fluorescence Turn-On of the GFP Chromophore: Supramolecular Structural Rigidity.

To turn on the fluorescence of the native green fluorescence protein (GFP) chromophore, 4-hydroxybenzylidene-dimethylimidazolinone (HBDI), in an artificial supramolecular system has been a challenging task, because it requires high local environmental rigidity. This work shows that the formation of H-aggregates of an HBDI-containing organogelator results in two orders of magnitude fluorescence enhancement (Φf =2.9 vs. 0.02 %), in which the inter-HBDI OH⋅⋅⋅OH H-bonds play a crucial role. The aggregation-induced fluorescence enhancement of HBDI has important implications on the origin of the high fluorescence quantum efficiency of HBDI in the GFP ß-barrel and on the supramolecular strategy for a full fluorescence recovery of HBDI. These results reveal a new approach to designing rigid chromophore aggregates for high-performance optoelectronic properties.

Synthesis, Luminescence, and Structure of a Polymorphic Polyfluorinated Diiodoplatinum(II) Diimine Complex.

PtI2(5,5'-bis(HCF2CH2OCH2)-2,2'-bpy)], 55-2FH-PtI2, is the first example of a substituted fluorinated diiodoplatinum diimine complex that exhibits polymorphism. The complex, upon recrystallization, forms two different polymorphs, denoted as α and ß forms. The luminescence of the α and ß forms are the same in glassy solution at 77 K; however, in the solid state, they differ significantly. The major difference between them lies in the solid-state packing of the crystalline structure. The α form is a square planar polyfluorinated PtI2-containing complex. Its extended herringbone structure consists of two neighboring stacked bipyridyl planes that do not overlap. The α form emits stronger than its parent molecule, [PtI2bpy], and much stronger than the ß polymorph. The ß form has a slight tetrahedral distortion about the metal center that ultimately changes the geometry of the complex and decreases the d-orbital splitting from square planar. Furthermore, overlapping bipyridine rings in the extended structure of the ß form quench the emission thus resulting in a lower energy emission. Additionally, the ß form shows only one type of C-H···O intermolecular stacking interaction that can cause the moderate distortion of the metal core.

Structural Tuning of Anion-Templated Motifs with External Stimuli through Crystal-to-Crystal Transformation.

Protonation of trans-1,2-bis(4-pyridyl)ethylene (4,4'-bpe) with dilute sulfuric acid (33 %) afforded a protonated adduct [{4,4'-bpe⋅2 H+ }2 {HSO4 }-2 {SO4 }-2 {H2 O}2 ] (1). The neighboring olefinic bond in 1 is in a suitable range (3.931-4.064 Å) to undergo a photochemical [2+2] cycloaddition reaction. Upon irradiation with UV light (365 nm), 1 undergoes a molecular sliding involving the 4,4'-bpe⋅2 H+ units, affording 2, stabilized through OSO4 ⋅⋅⋅π interactions. Heating 1 to 50° C leads to a 3D hydrogen-bonded organic framework (HOF) (3). This process occurs through thermal dissociation of the bisulfate anion. Diffusion of iodine through the crystal lattice of 1 and 3 enables the reduction of sulfate to bisulfate, affording a 1D hydrogen-bonded chain (4). Solid-state 13 C CPMAS NMR, IR, DSC, and powder XRD studies further support stimuli-responsive structural tuning through crystal-to-crystal transformation. All these conversions occur with significant translational and rotational movements along with a series of bond-breaking and bond-forming processes.

Fluorescence Enhancement of Unconstrained GFP Chromophore Analogues Based on the Push-Pull Substituent Effect.

Unlike the high fluorescence quantum yield of the naturally occurring green fluorescence protein (GFP, Φf ∼ 0.8), the GFP chromophore, a benzylidenedimethylimidazolinone (BDI) dye, is nearly nonfluorescent (Φf < 0.001) in common solutions at room temperature. While many efforts have been devoted into the BDI chromophore engineering for fluorescence recovery, limited success has been achieved for structurally unconstrained GFP chromophore analogues (uGFPc). Herein we report a rational design of uGFPc toward an unprecedentedly high fluorescence quantum efficiency of 0.60 in hexane. This is achieved by a combined ortho-CN and meta-dimethylamino substituent electronic effect that largely suppresses the Z → E photoisomerization (the τ torsion) reaction, which is the major nonradiative decay channel of uGFPc. The structural design relied on the assumptions that the τ torsion of the meta-amino-substituted BDI systems leads to a zwitterionic twisted intermediate state (1p*) and that destabilizing the 1p* state by an electron-withdrawing CN substituent at the ortho or para position could slow down the τ torsion. The observed CN position effect conforms to the design concept. The push-pull substitution of BDI also leads to sensitive fluorescence-quenching responses to electron donors such as trimethylamine and to H-bond donors such as methanol.

Structurally Flexible C3-Symmetric Receptors for Molecular Recognition and Their Self-Assembly Properties.

The bioinspired design and synthesis of building blocks and their assemblies by the supramolecular approach has ever fascinated scientists to utilize such artificial systems for numerous purposes. Flexibility is a basic feature of natural systems. However, in artificial systems this is difficult to control, especially if there is no preorganization of the component(s) of a system. We have designed and synthesized a series of C3 -symmetric N-bridged flexible receptors and successfully utilized them to selectively entrap the notorious and toxic nitrate anion in aqueous medium. This was the first report of highest binding affinity for the nitrate anion in aqueous medium. An impressive self-sorting phenomenon of reversibly formed hydrogen-bonded capsules, which self-assembled from flexible tripodal receptors having branches of similar size and bearing the same amide functionality, has been disclosed. Encapsulated nitrate anion has been further utilized for the photochemical [2+2] cycloaddition reaction for the synthesis of strained four-membered ring structures through dynamic self-assembly. In this Personal Account, we summarize these results showing the utility of naturally inspired flexibility in artificial systems.

Structure-performance correlations of organic dyes with an electron-deficient diphenylquinoxaline moiety for dye-sensitized solar cells.

The high performances of dye-sensitized solar cells (DSSCs) based on seven new dyes are disclosed. Herein, the synthesis and electrochemical and photophysical properties of a series of intentionally designed dipolar organic dyes and their application in DSSCs are reported. The molecular structures of the seven organic dyes are composed of a triphenylamine group as an electron donor, a cyanoacrylic acid as an electron acceptor, and an electron-deficient diphenylquinoxaline moiety integrated in the π-conjugated spacer between the electron donor and acceptor moieties. The DSSCs based on the dye DJ104 gave the best overall cell performance of 8.06 %; the efficiency of the DSSC based on the standard N719 dye under the same experimental conditions was 8.82 %. The spectral coverage of incident photon-to-electron conversion efficiencies extends to the onset at the near-infrared region due to strong internal charge-transfer transition as well as the effect of electron-deficient diphenylquinoxaline to lower the energy gap in these organic dyes. A combined tetraphenyl segment as a hydrophobic barrier in these organic dyes effectively slows down the charge recombination from TiO2 to the electrolyte and boosts the photovoltage, comparable to their Ru(II) counterparts. Detailed spectroscopic studies have revealed the dye structure-cell performance correlations, to allow future design of efficient light-harvesting organic dyes.

Steric Effects on the Photovoltaic Performance of Panchromatic Ruthenium Sensitizers for Dye-Sensitized Solar Cells.

Three new heteroleptic Ru complexes, CYC-B22, CYC-B23C, and CYC-B23T, were prepared as sensitizers for coadsorbent-free, panchromatic, and efficient dye-sensitized solar cells. They are simultaneously functionalized with highly conjugated anchoring and ancillary ligands to explore the electronic and steric effects on their photovoltaic characteristics. The coadsorbent-free device based on CYC-B22 achieved the best power conversion efficiency (PCE) of 8.63% and a panchromatic response extending to 850 nm. The two stereoisomers, CYC-B23C and CYC-B23T coordinated with an unsymmetrical anchoring ligand, display similar absorption properties and the same driving forces for electron injection as well as dye regeneration. Nevertheless, the devices show not only the remarkably distinct PCE (6.64% vs 8.38%) but also discernible stability. The molecular simulation for the two stereoisomers adsorbed on TiO2 clarifies the distinguishable distances (16.9 Å vs 19.0 Å) between the sulfur atoms in the NCS ligands and the surface of the TiO2, dominating the charge recombination dynamics and iodine binding and therefore the PCE and stability of the devices. This study on the steric effects caused by the highly conjugated and unsymmetrical anchoring ligand on the adsorption geometry and photovoltaic performance of the dyes paves a new way for advancing the molecular design of polypyridyl metal complex sensitizers.

Supramolecular assemblies of amide-derived organogels featuring rigid π-conjugated phenylethynyl frameworks.

Organogels, being an important class of soft materials, have evolved to be one of the most attractive subjects bridging supramolecular chemistry and material sciences due to their structural diversity and associated physical properties. Myriad applications in fields such as optoelectronics, light harvesting, environmental science, and regenerative medicine are being envisaged. Supramolecular gels usually are formed through self-aggregation of small-molecule gelators to form entangled self-assembled fibrillar networks through a combination of non covalent interactions such as hydrogen bonding, π-π stacking, electrostatic forces, donor-acceptor interactions, metal coordination, solvophobic forces, and van der Waals interactions. This feature article discusses recent and current state of research on amide derived organogelators bearing rigid conjugated phenylethynyl building blocks. Selective examples from our works along with some closely related examples from literature have been highlighted to showcase the structural diversity and their potential applications in supramolecular chemistry and materials science.

High-performance dipolar organic dyes with an electron-deficient diphenylquinoxaline moiety in the π-conjugation framework for dye-sensitized solar cells.

We report here the synthesis and electrochemical and photophysical properties of a series of easily prepared dipolar organic dyes and their application in dye-sensitized solar cells (DSSCs). For the six organic dyes, the molecular structures comprised a triphenylamine group as an electron donor, a cyanoacrylic acid as an electron acceptor, and an electron-deficient diphenylquinoxaline moiety integrated in the π-conjugated spacer between the electron donor and acceptor moieties. The incorporation of the electron-deficient diphenylquinoxaline moiety effectively reduces the energy gap of the dyes and broadly extends the spectral coverage. DSSCs based on dye 6 produced the best overall cell performance of 7.35 %, which translates to approximately 79 % of the intrinsic efficiency of the DSSCs based on the standard N719 dye under identical experimental conditions. The high performance of DSSCs based on dye 6 among the six dyes explored is attributed to the combined effects of high dye loading on a TiO(2) surface, rapid dye regeneration, and effective retardation of charge recombination.

Synthesis and photophysical properties of self-assembled metallogels of platinum(II) acetylide complexes with elaborate long-chain pyridine-2,6-dicarboxamides.

A series of platinum(II) acetylide complexes with elaborate long-chain pyridine-2,6-dicarboxamides was synthesized. These metal complexes are capable of immobilizing organic solvents to form luminescent metallogels through a combination of intermolecular hydrogen bonding, aromatic π-π, and van der Waals interactions. Fibrillar morphologies were identified by TEM for these metallogels. Unique photophysical properties associated with the sol-to-gel transition have been disclosed with luminescence enhancement at elevated temperatures, which is in sharp contrast to typical thermotropic organogels or metallogels reported in the literature. Such unusual luminescence enhancement is attributed to the increased degree of freedom at higher temperatures that results in the formation of favorable molecular aggregates in the excited state through enhanced aromatic π-π and metallophilic Pt(II)···Pt(II) interactions. Structurally similar Pt-bp3 is not able to gel any common organic solvents. The inability of Pt-bp3 to form gels illustrates the importance of gelation to the macroscopic photophysical properties; Pt-bp3 does not show emission enhancement at elevated temperatures due to its low tendency to form strong aggregates in the ground state.

Recognition, encapsulation, and selective fluorescence sensing of nitrate anion by neutral C3-symmetric tripodal podands bearing amide functionality.

A series of neutral C(3)-symmetric acyclic artificial receptors incorporating amide functionality has been designed, synthesized, and fully characterized. Upon protonation, these conformationally flexible N-bridged tripodal podands 1-5 form in situ cone shape conformation through hydrogen bonding and C-H···π interactions. The protonation-induced interior preorganized cavity is capable of entrapping nitrate anions through the amide N-H bonds to form discrete nitrate complexes (1a-5a), which were fully characterized by NMR, HRESI mass spectra, and single crystal structures. By incorporating suitable fluorophores at each branch of the tripod receptor, the resulting fluorescent receptor 5 selectively recognized nitrate anions by fluorescent quenching in a DMSO solution and displayed one of the highest binding affinities for nitrate anions reported so far in polar media. Receptor 5 represents a unique example of a neutral receptor for the recognition of nitrate anions in polar solvent media by its zwitterionic form. The possible mechanism of proton-induced preorganization of these flexible, acyclic receptors in a convergent cone conformation followed by nitrate complexation has been proposed to rationalize the effective nitrate recognition.

Chiral amplification in one-dimensional helical nanostructures self-organized from phenylethynyl thiophene with elaborated long-chain dicarboxamides.

A bis-phenylethynyl thiophene derivative functionalized with long-chain pyridyl biscarboxamides displayed unique helical morphology in the xerogel form via nicely complementary intermolecular interactions. The helical nanostructures visualized by TEM and AFM remarkably matched well with the computational results. Supramolecular chirality can be amplified by coassembly of a chiral conductor to bias the helical arrangement.

A selective colorimetric Hg2+ probe featuring a styryl dithiaazacrown containing platinum (II) terpyridine complex through modulation of the relative strength of ICT and MLCT transitions.

A series of platinum(II) terpyridine complexes featuring an aminostilbene donor-acceptor framework was synthesized. The complex with a dithiaazacrown moiety exhibits a highly sensitive and selective colorimetric response to a Hg(2+) cation through modulation of the relative strength of ICT and MLCT transitions. The results from (1)H NMR titration suggest the existence of a weak Pt(II)···Hg(II) metallophilic interaction at low Hg(2+) concentration.

Synthesis of electron deficient acene derivatives via a bidirectional iterative elongation reaction.

Previously, we developed an iterative elongation methodology to synthesize acene esters, nitriles, and imides. The strategy uses the concept of bidirectional synthesis, and we can now make a series of electron deficient anthracene, tetracene, and pentacene derivatives via the bidirectional iterative elongation protocol. Central units, used to initiate the bidirectional elongation, were synthesized by employing a double anionic Fries rearrangement as the key step. The photophysical and electrochemical properties of these novel electron acceptors are investigated and interpreted based on the electron withdrawing power of the substitutions. An excited state charge transfer was proposed for one compound to account for its peculiar fluorescent behavior.

Tailoring Photophysical Properties of Diketopyrrolopyrrole Small Molecules with Electron-Withdrawing Moieties for Efficient Solar Steam Generation.

The development of photothermal materials (PTMs) for solar steam generation (SSG) has gained tremendous attention in response to the global clean water scarcity issue. However, the investigation in employing organic small-molecule PTMs for SSG applications is rarely found due to their narrow optical absorption range to harvest solar energy and insufficient photostability for long-term use. Herein, we employ a diketopyrrolopyrrole (DPP) core unit together with electron-withdrawing (EW) endcaps and siloxane side chains to introduce stronger intramolecular charge transfer (ICT) characteristics as well as the hydrophobic character. The enhanced ICT characteristics of DPP derivatives render a broad optical absorption range, less emission, and a high nonradiative decay rate for efficient solar energy harvesting and photothermal effects. Meanwhile, the hydrophobic nature of these DPP derivatives allows the facile fabrication of novel Janus photothermal membranes for effective water vaporization and solar-to-vapor conversion efficiency. By embedding DPP derivatives to the SSG device, we showed that the solar-to-vapor efficiency can reach up to 71.8% under relatively low visible light power (∼700 W m-2), which is, on average, 2.66 times higher than that of bulk water of similar dimension. Moreover, this report demonstrates the great potential of conjugated small molecules for photothermal applications, owing to their versatility and flexibility in structural engineering and its diminishing radiative decay properties. This may inspire more innovation and advancement in SSG applications.