RESUMO
Chloroplasts are green plastids in the cytoplasm of eukaryotic algae and plants responsible for photosynthesis. The plastid-encoded RNA polymerase (PEP) plays an essential role during chloroplast biogenesis from proplastids and functions as the predominant RNA polymerase in mature chloroplasts. The PEP-centered transcription apparatus comprises a bacterial-origin PEP core and more than a dozen eukaryotic-origin PEP-associated proteins (PAPs) encoded in the nucleus. Here, we determined the cryo-EM structures of Nicotiana tabacum (tobacco) PEP-PAP apoenzyme and PEP-PAP transcription elongation complexes at near-atomic resolutions. Our data show the PEP core adopts a typical fold as bacterial RNAP. Fifteen PAPs bind at the periphery of the PEP core, facilitate assembling the PEP-PAP supercomplex, protect the complex from oxidation damage, and likely couple gene transcription with RNA processing. Our results report the high-resolution architecture of the chloroplast transcription apparatus and provide the structural basis for the mechanistic and functional study of transcription regulation in chloroplasts.
Assuntos
RNA Polimerases Dirigidas por DNA , Plastídeos , Cloroplastos/metabolismo , Microscopia Crioeletrônica , RNA Polimerases Dirigidas por DNA/genética , Nicotiana/genética , Fotossíntese , Plastídeos/enzimologiaRESUMO
The Klebsiella pneumoniae (K. pneumoniae, Kp) populations carrying both resistance-encoding and virulence-encoding mobile genetic elements (MGEs) significantly threaten global health. In this study, we identified a new anti-CRISPR gene (acrIE10) on a conjugative plasmid with self-target sequence in K. pneumoniae with type I-E* CRISPR-Cas system. AcrIE10 interacts with the Cas7* subunit of K. pneumoniae I-E* CRISPR-Cas system. The crystal structure of the AcrIE10-KpCas7* complex suggests that AcrIE10 suppresses the I-E* CRISPR-Cas by binding directly to Cas7 to prevent its hexamerization, thereby preventing the surveillance complex assembly and crRNA loading. Bioinformatic and functional analyses revealed that AcrIE10 is functionally widespread across diverse species. Our study reports a novel anti-CRISPR and highlights its potential role in spreading resistance and virulence among pathogens.
Assuntos
Proteínas de Bactérias , Sistemas CRISPR-Cas , Klebsiella pneumoniae , Plasmídeos , Klebsiella pneumoniae/genética , Klebsiella pneumoniae/efeitos dos fármacos , Plasmídeos/genética , Proteínas de Bactérias/genética , Proteínas de Bactérias/metabolismo , Farmacorresistência Bacteriana/genética , Repetições Palindrômicas Curtas Agrupadas e Regularmente Espaçadas/genética , Virulência/genética , Proteínas Associadas a CRISPR/metabolismo , Proteínas Associadas a CRISPR/genéticaRESUMO
Nanoparticle surfactants have been widely used to construct structured liquids in oil-water systems. Less attention, though, has been given in non-aqueous systems, for example, oil-oil systems, mainly due to the lack of suitable surfactants. Here, by using newly developed molecular brush surfactants (MBSs) that form at the DMSO-silicone oil interface, the construction of all-oil microfluidic devices is reported with advanced functions. Due to the high interfacial activity of MBSs, Plateau-Rayleigh instabilities of liquid jets can be completely suppressed, leading to the production of liquid threads with jammed MBSs at the interface. Taking advantage of the 3D printing technique, all-oil microfluidic devices with complex structures can be constructed, showing promising applications in mass transmission, chemical separation, and material synthesis.
RESUMO
High internal phase emulsions (HIPEs) have been of great interest for fabricating fluorinated porous polymers having controlled pore structures and excellent physicochemical properties. However, it remains a challenge to prepare stable fluorocarbon HIPEs, due to the lack of suitable surfactants. By randomly grating hydrophilic and fluorophilic side chains to polyphosphazene (PPZ), a comb-like amphiphilic PPZ surfactant with biodegradability is designed and synthesized for stabilizing water/fluorocarbon oil-based emulsions. The hydrophilic-lipophilic balance of PPZs can be controlled by tuning the grating ratio of the two side chains, leading to the preparation of stable water-in-oil HIPEs and oil-in-water emulsions, and the production of fluorinated porous polymers and particles by polymerizing the oil phase. These fluorinated porous polymers show excellent thermal stability and, due to the hydrophobicity and porous structure, applications in the field of oil/water separation can be achieved.
RESUMO
Cation-π and charge-transfer (CT) interactions are pervasive with significant implications in the fields of chemistry, materials science, and biology. However, much less is known about the construction of interfacial assemblies based on the two interactions. Here, by combining cation-π and CT interactions between an acceptor molecule, dicationic naphthalenediimide, and an aromatic donor, pyrene-terminated poly-l-lactic acid, we report the generation of supramolecular complex surfactants (SCSs) in situ at the toluene-water interface. The utilization of SCSs as building blocks enables the fabrication of interfacial assemblies including 2D films, emulsions, and structured liquids. By modification of the redox state of the acceptor molecules under chemical stimulus, the association/assembly and dissociation/disassembly of SCSs can be precisely regulated, imparting intriguing redox-responsive properties to the resulting assemblies.
RESUMO
Vascular mild cognitive impairment (VMCI) is an early and reversible stage of dementia. Volume differences in regional gray matter may reveal the development and prognosis of VMCI. This study selected 2 of the most common types of VMCI, namely, periventricular white matter hyperintensities (PWMH, n = 14) and strategic single infarctions (SSI, n = 10), and used the voxel-based morphometry method to quantify their morphological characteristics. Meanwhile, age- and sex-matched healthy volunteers were included (n = 16). All the participants were neuropsychologically tested to characterize their cognitive function and underwent whole-brain magnetic resonance imaging scanning. Our results showed that the volumes of the bilateral temporal lobes and bilateral frontal gray matter were obviously diminished in the PWMH group. The atrophy volume difference was 4,086 voxels in the left temporal lobe, 4,154 voxels in the right temporal lobe, 1,718 voxels in the left frontal lobe, and 1,141 voxels in the right frontal lobe (P ≤ 0.001). Moreover, the characteristics of the gray matter atrophy associated with the PWMH were more similar to those associated with Alzheimer's disease than SSI, which further revealed the susceptibility for escalation from PWMH to dementia. In conclusion, PWMH patients and SSI patients have different morphological characteristics, which explain the different prognoses of VMCI.
Assuntos
Doença de Alzheimer , Disfunção Cognitiva , Humanos , Testes Neuropsicológicos , Disfunção Cognitiva/patologia , Encéfalo , Substância Cinzenta/patologia , Doença de Alzheimer/patologia , Imageamento por Ressonância Magnética , Atrofia/patologia , Diagnóstico PrecoceRESUMO
Using host-guest interactions between ß-cyclodextrin-modified branched polyethyleneimine and ferrocene-terminated poly-L-lactide, the formation, assembly and jamming of polyethyleneimine surfactants (PEISs) at the liquid-liquid interface is presented. With PEIS, reconfigurable liquids with electrochemical redox responsiveness can be constructed. In conjunction with microfluidic methods, continuous, selective diffusion and purification of ionic species can be achieved in all-liquid constructs.
RESUMO
Nanoparticle surfactants (NPSs) offer a powerful means to stabilize the oil-water interface and construct all-liquid devices with advanced functions. However, as the nanoparticle size decreases to molecular-scale, the binding energy of the NPS to the interface reduces significantly, leading to a dynamic adsorption of NPS and "liquid-like" state of the interfacial assemblies. Here, by using the host-guest recognition between a water-soluble small molecule, cucurbit[7]uril (CB[7]) and an oil-soluble polymer ligand, methyl viologen-terminated polystyrene, a supramolecular NPS model, termed CB[7] surfactant, is described. CB[7] surfactants form and assemble rapidly at the oil-water interface, generating an elastic film with excellent mechanical properties. The binding energy of CB[7] surfactant to the interface is sufficiently high to hold it in a jammed state, transforming the interfacial assemblies from a "liquid-like" to "solid-like" state, enabling the structuring of liquids. With CB[7] surfactants as the emulsifier, O/W, W/O and O/W/O emulsions can be prepared in one step. Owing to the guest-competitive responsiveness of CB[7] surfactants, the assembly/disassembly and jamming/unjamming of CB[7] surfactants can be well controlled, leading to the reconfiguration of all-liquid constructs.
Assuntos
Hidrocarbonetos Aromáticos com Pontes , Tensoativos , Tensoativos/química , Hidrocarbonetos Aromáticos com Pontes/química , Imidazóis/química , Água/químicaRESUMO
Charge transfer (CT) interactions have been widely used to construct supramolecular systems, such as functional nanostructures and gels. However, to date, there is no report on the generation of CT complexes at the liquid-liquid interface. Here, by using an electron-deficient acceptor dissolved in water and an electron-rich donor dissolved in oil, we present the in situ formation and assembly of CT complex surfactants (CTCSs) at the oil-water interface. With time, CTCSs can assemble into higher-order nanofilms with exceptional mechanical properties, allowing the stabilization of liquids and offering the possibility to structure liquids into nonequilibrium shapes. Moreover, due to the redox-responsiveness of the electron-deficient acceptor, the association and dissociation of CTCSs can be reversibly manipulated in a redox process, leading to the switchable assembly and disassembly of the resultant constructs.
RESUMO
Drug detection in biological solutions is essential in studying the pharmacokinetics of the body. Electrochemical detection is an accurate and rapid method, but measuring multiple drugs that react at similar potentials is challenging. Herein, we developed an electrochemical sensor using a boron-doped diamond (BDD) electrode modified with a molecularly imprinted polymer (MIP) to provide specificity in drug sensing. The MIP is a polymer material designed to recognize and capture template molecules, enabling the selective detection of target molecules. In this study, we selected the anticancer drug doxorubicin (DOX) as the template molecule. In the electrochemical measurements using an unmodified BDD, the DOX reduction was observed at approximately -0.5 V (vs Ag/AgCl). Other drugs, i.e., mitomycin C or clonazepam (CZP), also underwent a reduction reaction at a similar potential to that of DOX, when using the unmodified BDD, which rendered the accurate quantification of DOX in a mixture challenging. Similar measurements conducted in PBS using the MIP-BDD only resulted in a DOX reduction current, with no reduction reaction observed in the presence of mitomycin C and CZP. These results suggest that the MIP, whose template molecule is DOX, inhibits the reduction of other drugs on the electrode surface. Selective DOX measurement using the MIP-BDD was also possible in human plasma, and the respective limits of detection of DOX in PBS and human plasma were 32.10 and 16.61 nM. The MIP-BDD was durable for use in six repeated measurements, and MIP-BDD may be applicable as an electrochemical sensor for application in therapeutic drug monitoring.
Assuntos
Técnicas Eletroquímicas , Polímeros Molecularmente Impressos , Humanos , Técnicas Eletroquímicas/métodos , Boro/química , Mitomicina , Limite de Detecção , Eletrodos , DoxorrubicinaRESUMO
Droplet networks stabilized by lipid interfacial bilayers or colloidal particles have been extensively investigated in recent years and are of great interest for compartmentalized reactions and biological functions. However, current design strategies are disadvantaged by complex preparations and limited droplet size. Here, by using the assembly and jamming of cucurbit[8]uril surfactants at the oil-water interface, we show a novel means of preparing droplet networks that are multi-responsive, reconfigurable, and internally connected over macroscopic distances. Openings between the droplets enable the exchange of matter, affording a platform for chemical reactions and material synthesis. Our work requires only a manual compression to construct complex patterns of droplet networks, underscoring the simplicity of this strategy and the range of potential applications.
RESUMO
The massive use and discharge of antibiotics have led to increasing concerns about antimicrobial resistance (AMR) in natural aquatic environments. Since the dose-response mechanisms of pathogens with AMR have not yet been fully understood, and the antibiotic resistance genes and bacteria-related data collection via field sampling and laboratory testing is time-consuming and expensive, designing a rapid approach to quantify the burden of AMR in the natural aquatic environment has become a challenge. To cope with such a challenge, a new approach involving an integrated machine-learning framework was developed by investigating the associations between the relative burden of AMR and easily accessible variables (i.e., relevant environmental variables and adjacent land-use patterns). The results, based on a real-world case analysis, demonstrate that the quantification speed has been reduced from 3-7 days, which is typical for traditional measurement procedures with field sampling and laboratory testing, to approximately 0.5 hours using the new approach. Moreover, all five metrics for AMR relative burden quantification exceed the threshold level of 85%, with F1-score surpassing 0.92. Compared to logistic regression, decision trees, and basic random forest, the adaptive random forest model within the framework significantly improves quantification accuracy without sacrificing model interpretability. Two environmental variables, dissolved oxygen and resistivity, along with the proportion of green areas were identified as three key feature variables for the rapid quantification. This study contributes to the enrichment of burden analyses and management practices for rapid quantification of the relative burden of AMR without dose-response information.
Assuntos
Aprendizado de Máquina , Antibacterianos/farmacologia , Resistência Microbiana a Medicamentos/genética , Monitoramento Ambiental/métodosRESUMO
Constructing all-oil systems with desired geometries and responsiveness would produce a new class of reconfigurable materials that can be used for applications that are not compatible with water or aqueous systems, a fascinating goal to achieve but severely limited by the lack of surfactants. Here, we demonstrate an efficient strategy to stabilize oil-oil interfaces by using the co-assembly between the cellulose nanocrystal and amine-functionalized polyhedral oligomeric silsesquioxane (POSS-NH2). Cellulose nanocrystal surfactants (CNCSs) form and assemble in situ at the interface, showing significantly enhanced binding energy and acid-dependent interfacial activity. When CNCSs jam at the interface, a robust assembly with exceptional mechanical properties can be achieved, allowing the 3D printing of all-oil devices on demand. Using CNCSs as emulsifiers, oil-in-oil high internal phase emulsions can be prepared by one-step homogenization and, when used as templates, porous materials that require water-sensitive monomers can be synthesized. These results open a new platform for stabilizing and structuring all-oil systems, providing numerous applications for microreactors, encapsulation, delivery, and tissue engineering scaffolds.
RESUMO
The development of multicellular lumens involves the interplay of cell proliferation, oscillation, and fluid transport. In this paper, a fluid-solid coupling dynamic model is proposed to investigate the physical mechanisms underlying the oscillatory growth of lumens. On the basis of experimental observations, the periodic oscillation of a lumen is interpreted by the fracturing-healing mechanism of cell-cell contacts, which induces a hydraulic-controlled outward flow switch. This model reproduces the oscillations of lumen sizes, in agreement with the experimental results of Hydra regeneration. It is found that the overall change trend of the lumen volume is determined by the tissue development induced by cell proliferation and the fluid transport induced by the osmotic pressure, while the outward flow due to the fracturing of cell-cell contacts regulates the oscillatory volume and the stress level in an appropriate scope. This work not only deepens our understanding of biomechanical mechanisms under the development of fluid-containing lumens, but also provides a theoretical framework to rationalize the dynamics of lumen-like tissues.
RESUMO
Background: The current diagnosis of Parkinson's disease (PD) is mainly based on the typical clinical manifestations. However, 60% dopaminergic neurons have died when the typical clinical manifestations occur. Predictive neurobiomarkers may help identify those PD patients having non-motor disorders or in different stage and achieving the aim of early diagnosis. Up to date, few if any neuroimaging techniques have been described useful for non-movement disorders diagnosis in PD patients. Here, we investigated the alteration of metabolites in PD patients in different stage of PD and non-motor symptoms including sleep, gastrointestinal and cognitive dysfunction, by using the 1H-MRS. Methods: A total of 48 subjects were included between 2017 and 2019: 37 PD (15 men, age 47-82 years) and 11 healthy people (8 men, age 49-74 years). All participants underwent MRI and multi-voxel 1H-MRS examination within 3 days in admission. Six kinds of metabolites, such as creatine (Cr), N-acetyl aspartate/creatine (NAA/Cr), N-acetyl aspartate/choline (NAA/Cho), choline/creatine (Cho/Cr), lipid/creatine (LL/Cr), and myo-Inositol/creatine ratio (mI/Cr) were tested among the PD group and the control groups. Statistical analyses and correlation analyses were performed by using SPSS. The p < 0.05 was considered statistically significant. Results: Compared late PD group with a control group or early group, higher Cr ratio and lower NAA/Cr ratio were observed in the late PD group (p < 0.05). The mI/Cr in the late PD group was also lower than that in the early PD group (p < 0.05). Regarding the relationship between metabolites and NMS, Cho/Cr was higher in the sleep disorder group, whereas mI/Cr was lower in the gastrointestinal dysfunction group in comparison with the non-symptom groups. Moreover, Cr, Cho/Cr, mI/Cr, and LL/Cr were identified to have higher concentrations in the cognitive group in thalamus. Conclusions: Proton magnetic resonance spectroscopy is an advanced tool to quantify the metabolic changes in PD. Three biomarkers (Cr, NAA/Cr, and mI/Cr) were detected in the late stage of PD, suggesting that these markers might be potential to imply the progression of PD. In addition, subgroups analysis showed that MRS of thalamus is a sensitive region for the detection of cognitive decline in PD, and the alteration of neurochemicals (involving Cr, Cho, mI, and LL) may be promising biomarkers to predict cognitive decline in PD.
RESUMO
Purpose: This study aimed to detect changes in iron deposition and neural microstructure in the substantia nigra (SN), red nucleus (RN), and basal ganglia of Parkinson's disease (PD) patients at different stages using quantitative susceptibility mapping and diffusion kurtosis imaging to identify potential indicators of early-stage PD. Methods: We enrolled 20 early-stage and 15 late-stage PD patients, as well as 20 age- and sex-matched controls. All participants underwent quantitative susceptibility mapping and diffusion kurtosis imaging to determine magnetic susceptibility (MS), fractional anisotropy (FA), mean diffusivity (MD), and mean kurtosis (MK) in several brain regions. Results: Compared with the control group, MS and MK values in the SN were significantly increased in the early- and late-stage PD group, whereas MS values in the red nucleus (RN), globus pallidus (GP), and caudate nucleus (CN), FA value in the CN and GP, and MK value in the CN and putamen (PU) were significantly increased in the late-stage PD group. There were positive correlations between MS and MK values in the CN and MS and FA values in the GP. Furthermore, the combination of MS and MK values in the SN provided high accuracy for distinguishing early-stage PD patients from controls. Conclusions: This study identified MS and MK in the SN as potential indicators of early-stage PD.
Assuntos
Doença de Parkinson , Biomarcadores , Imagem de Tensor de Difusão/métodos , Humanos , Ferro , Imageamento por Ressonância Magnética/métodos , Doença de Parkinson/diagnóstico por imagem , Substância Negra/diagnóstico por imagemRESUMO
Enterohemorrhagic Escherichia coli are a dangerous bacterium known to be harmful to the human body, with some infections even resulting in death. Given this danger, food factories are required to perform a quick bacterial test to confirm the absence of this pathogen prior to shipping. We have developed a novel molecular imprinting polymer (MIP) particle that has encapsulated gold nanoparticles (AuNPs) and which can function as both a receptor and an optical signal transmitter in biological systems. This MIP particle is artificially synthesized and can be engineered to specifically recognize and capture antigens on the bacterial cell membrane. In addition, MIP particles containing AuNPs generate strong scattered light signals, and binding of the MIP particles improves the optical intensity of the target bacterial cells. This enables clear visualization under a dark-field microscope and quantification of the target bacteria using the scattering light intensity. Here we describe the successful quantification of Escherichia coli O157 cells in real meat samples using this technology in conjunction with a simple labelling step.
Assuntos
Escherichia coli Êntero-Hemorrágica , Escherichia coli O157 , Nanopartículas Metálicas , Ouro , Humanos , TemperaturaRESUMO
We explored how tabersonine (Tab) protected against dexamethasone (Dex)-induced osteoporosis. Osteoblasts were treated with Dex (100 µM) with or without Table (5 or 10 µM). We measured cell viability, alkaline phosphatase (ALP) activity, and mitochondrial superoxide and reactive oxygen species levels. We used flow cytometry to explore the effects of Tab on mitochondrial membrane potential and osteoblast apoptosis. We used RT-PCR and western blotting to examine the effect of Tab on protein expression. We evaluated the effects of Tab on bone histopathology and bone mineral density in rats with Dex-induced osteoporosis. Tab increased cell viability and ALP activity, and reduced the mitochondrial superoxide, reactive oxygen species and matrix metalloproteinase levels and osteoblast apoptosis. Tab significantly reduced the levels of nuclear factor erythroid 2-related factor 2 (Nrf2), haem oxygenase-1 and NAD(P)H quinone dehydrogenase 1. Moreover, it increased the levels of mRNAs encoding runt-related transcription factor 2, bone morphogenetic protein-2 and osterix. These data suggest that Tab ameliorates Dex-induced osteoporosis by regulating the Nrf2 signalling pathway.
RESUMO
In this reported work, we achieved high-throughput, highly sensitive fluorescent analysis using an enzyme-linked immunosorbent assay (ELISA) that employed a metallic nanoparticle (NP)-immobilized 96-well plate. The immobilization of metallic NPs on a 96-well plate effectively amplified fluorescent signals of the assay. The silver (Ag) NP-immobilized plate showed the best fluorescent enhancement effect of all plates immobilized by metal NPs. Our results demonstrate the potential of applying Ag NPs to enhance the efficiency of direct and indirect ELISA by the labeling of targets.
Assuntos
Ensaio de Imunoadsorção Enzimática , Fluorescência , Ouro/química , Nanopartículas Metálicas/química , Paládio/química , Prata/químicaRESUMO
Enzyme-linked immunosorbent assay (ELISA) is a widespread analytical biochemistry assay. In this work, a direct ELISA method using a metallic nanoparticle (NP)-immobilized 96-well plate was developed for high-throughput, highly sensitive fluorescence analysis. Immobilization of metallic NPs on a 96-well plate effectively amplified fluorescence signals of the assay. The silver (Ag) NP-immobilized plate showed the best fluorescence enhancement effect of all the metal-immobilized plates tested. We used the Ag NP-immobilized plate to detect biomolecules and bacteria and found that both the fluorescence intensity and the limit of detection (LOD) were strongly enhanced by more than 100 times compared with those of the unmodified 96-well plates. Quantitative and qualitative considerations for target bacteria regarding the impact of autofluorescence on detection were successfully obtained for several strains. Our results demonstrate the potential of applying Ag NPs for enhancing the efficiency of direct and indirect ELISA assays.