RESUMO
Janus transition metal dichalcogenides (TMDCs), with dissimilar chalcogen atoms on each side of TMDCs, have garnered considerable research attention because of the out-of-plane intrinsic polarization in monolayer TMDCs. Although a plasma process has been proposed for synthesizing Janus TMDCs based on the atomic substitution of surface atoms at room temperature, the formation dynamics and intermediate electronic states have not been completely examined. In this study, we investigated the intermediate state between MoSe2 and Janus MoSeS during plasma processing. Atomic composition analysis and atomic-scale structural observations revealed the intermediate partially substituted Janus (PSJ) structure. Combined with theoretical calculations, we successfully clarified the characteristic Raman modes in the intermediate PSJ structure. The PL exhibited discontinuous transitions that could not be explained by the theoretical calculations. These findings will contribute toward understanding the formation process and electronic-state modulation of Janus TMDCs.
RESUMO
Two-dimensional (2D) hybrid perovskites with novel functionalities and structural diversity are a perfect platform for emerging optoelectronic devices such as photodetectors, light-emitting diodes, and solar cells. Here, we demonstrate that excess concentration of Cesium bromide (CsBr) is key to the formation of easily exfoliated 2D Cs2 Cu(Cl/Br)4 perovskite crystal. Furthermore, by employing this trick to 2D perovskite MA2 Cu(Cl/Br)4 (MA=methylammonium), we achieve a phase-pure easily exfoliated 2D mixed-cation (MA/Cs)2 Cu(Cl/Br)4 perovskite crystal, which exhibits reduced bandgap (1.53â eV) with ferromagnetic behavior and photovoltaic property. The resultant mixed-cation structured device reveals enhanced efficiency compared to all MA and all Cs counterparts. These findings demonstrate the importance of cation-engineering in developing innovative materials with novel properties.
RESUMO
Carbon nanotubes (CNTs) exhibit extremely high nanoscopic thermal/electrical transport and mechanical properties. However, the macroscopic properties of assembled CNTs are significantly lower than those of CNTs because of the boundary structure between the CNTs. Therefore, it is crucial to understand the relationship between the nanoscopic boundary structure in CNTs and the macroscopic properties of the assembled CNTs. Previous studies have shown that the nanoscopic phonon transport and macroscopic thermal transport in CNTs are improved by Joule annealing because of the improved boundary Van-der-Waals interactions between CNTs via the graphitization of amorphous carbon. In this study, we investigate the mechanical strength and thermal/electrical transport properties of CNT yarns with and without Joule annealing at various temperatures, analyzing the phenomena occurring at the boundaries of CNTs. The obtained experimental and theoretical results connect the nanoscopic boundary interaction of CNTs in CNT yarns and the macroscopic mechanical and transport properties of CNT yarns.
RESUMO
Perovskite based on cesium bismuth bromide offers a compelling, non-toxic alternative to lead-containing counterparts in optoelectronic applications. However, its widespread usage is hindered by its wide bandgap. This study investigates a significant bandgap tunability achieved by introducing Fe doping into the inorganic, lead-free, non-toxic, and stable Cs3Bi2Br9 perovskite at varying concentrations. The materials were synthesized using a facile method, with the aim of tuning the optoelectronic properties of the perovskite materials. Characterization through techniques such as X-ray diffraction, Raman spectroscopy, X-ray photoelectron spectroscopy, energy dispersive spectroscopy (EDS), and UV-vis spectroscopy was conducted to elucidate the transformation mechanism of the doping materials. The substitution process results in a significant change in the bandgap energy, transforming from the pristine Cs3Bi2Br9 with a bandgap of 2.54 eV to 1.78 eV upon 70% Fe doping. The addition of 50% Fe in Cs3Bi2Br9 leads to the formation of the orthorhombic structure in Cs2(Bi,Fe)Br5 perovskite, while complete Fe alloying at 100% results in the phase formation of CsFeBr4 perovskite. Our findings on regulation of bandgap energy and crystal structure through B site substitution hold significant promise for applications in optoelectronics.
RESUMO
The application of carbon nanotube (CNT) yarns as thermoelectric materials for harvesting energy from low-grade waste heat including that generated by the human body, is attracting considerable attention. However, the lack of efficient n-type CNT yarns hinders their practical implementation in thermoelectric devices. This study reports efficient n-doping of CNT yarns, employing 4-(1, 3-dimethyl-2, 3-dihydro-1H-benzimidazole-2-yl) phenyl) dimethylamine (N-DMBI) in alternative to conventional n-dopants, with o-dichlorobenzene emerging as the optimal solvent. The small molecular size of N-DMBI enables highly efficient doping within a remarkably short duration (10 s) while ensuring prolonged stability in air and at high temperature (150 °C). Furthermore, Joule annealing of the yarns significantly improves the n-doping efficiency. Consequently, thermoelectric power factors (PFs) of 2800, 2390, and 1534 µW m-1 K-2 are achieved at 200, 150, and 30 °C, respectively. The intercalation of N-DMBI molecules significantly suppresses the thermal conductivity, resulting in the high figure of merit (ZT) of 1.69×10-2 at 100 °C. Additionally, a π-type thermoelectric module is successfully demonstrated incorporating both p- and n-doped CNT yarns. This study offers an efficient doping strategy for achieving CNT yarns with high thermoelectric performance, contributing to the realization of lightweight and mechanically flexible CNT-based thermoelectric devices.
RESUMO
Electron transfer is a fundamental energy conversion process widely present in synthetic, industrial, and natural systems. Understanding the electron transfer process is important to exploit the uniqueness of the low-dimensional van der Waals (vdW) heterostructures because interlayer electron transfer produces the function of this class of material. Here, we show the occurrence of an electron transfer process in one-dimensional layer-stacking of carbon nanotubes (CNTs) and boron nitride nanotubes (BNNTs). This observation makes use of femtosecond broadband optical spectroscopy, ultrafast time-resolved electron diffraction, and first-principles theoretical calculations. These results reveal that near-ultraviolet photoexcitation induces an electron transfer from the conduction bands of CNT to BNNT layers via electronic decay channels. This physical process subsequently generates radial phonons in the one-dimensional vdW heterostructure material. The gathered insights unveil the fundamentals physics of interfacial interactions in low dimensional vdW heterostructures and their photoinduced dynamics, pushing their limits for photoactive multifunctional applications.
RESUMO
In this study, we analyzed golfers' swing movement to extract differences in proficiency and individual characteristics using two-dimensional video data from a single camera. We conducted an experiment with 27 golfers who had a wide range of skill levels, using a 7-iron; we acquired video data with a camera on the sagittal plane. For data extraction, we used pose estimation (using HRNet) and object detection (using DeepLabCut) methods to extract human-joint and club-head data. We examined the relationship between proficiency and individual characteristics vis-à-vis forward tilt angle and club trajectory. The results showed that the stability and reproducibility of the forward tilt angle are characteristics of proficiency. Highly skilled golfers showed low variability and high reproducibility between trials in forward tilt angle. However, we found that club trajectory may not be a characteristic of proficiency but rather an individual characteristic. Club trajectory was divided roughly into clockwise rotation and counterclockwise rotation. Thus, the analysis based on video data from a single markerless camera enabled the extraction of the differences in proficiency and individual characteristics of golf swing. This suggests the usefulness of our system for simply evaluating golf swings and applying it to motor learning and coaching situations.
RESUMO
In this study, we investigated the impact of benzophenone (BP), a small molecule additive, on the performance and stability of inverted perovskite solar cells (PSCs). Specifically, we introduced BP into the perovskite precursor solution of FAPbI3 to fabricate PSCs with an ITO/PEDOT:PSS/BP:FAPbI3/PCBM/C60/PCB/Ag architecture. The incorporation of BP with an optimum concentration of 2 mg mL-1 significantly enhanced the power conversion efficiency (PCE) of the inverted PSC from 13.12 to 18.84% with negligible hysteresis. Notably, the BP-based PSCs retained â¼90% of their initial PCE after being stored in ambient air with 30% relative humidity at 25 °C for 700 h. In contrast, control devices showed rapid degradation, retaining only 30% of their initial value within 300 h under the same conditions. We attributed the superior performance and stability of the BP-based PSCs to the grain boundary passivation of the perovskite film. The improvement was mainly attributed to the intermolecular interaction between the O-donor Lewis base BP material and both Pb2+ and FA+ in FAPbI3. This effectively suppresses trap-assisted recombination and promotes the conversion of the δ-phase to photoactive and stable α-phase FAPbI3. Overall, our findings suggest that BP is a promising additive for improving the performance and stability of inverted PSCs.
RESUMO
Transition metal dichalcogenides (TMDCs) are promising two-dimensional (2D) materials for next-generation optoelectronic devices; they can also provide opportunities for further advances in physics. Structuring 2D TMDC sheets as nanoribbons has tremendous potential for electronic state modification. However, a bottom-up synthesis of long TMDC nanoribbons with high monolayer selectivity on a large scale has not yet been reported yet. In this study, we successfully synthesized long WxOy nanowires and grew monolayer WS2 nanoribbons on their surface. The supply of source atoms from a vapor-solid bilayer and chemical reaction at the atomic-scale interface promoted a self-limiting growth process. The developed method exhibited a high monolayer selection yield on a large scale and enabled the growth of long (â¼100 µm) WS2 nanoribbons with electronic properties characterized by optical spectroscopy and electrical transport measurements. The produced nanoribbons were isolated from WxOy nanowires by mechanical exfoliation and used as channels for field-effect transistors. The findings of this study can be used in future optoelectronic device applications and advanced physics research.
RESUMO
We herein present a rare case of enterovesical fistula caused by ileal non-Hodgkin's lymphoma. A 75-year-old Japanese male presented with macrohematuria at Kosei General Hospital in December 2010. An egg-sized mass was palpable in his right lower abdominal region, and computed tomography (CT) revealed that the ileal tumor had invaded the right posterior wall of the urinary bladder (UB). A histopathological examination of a CT-guided needle biopsy specimen revealed diffuse large B-cell lymphoma involving the ileum and the UB. Thereafter, fecaluria appeared. A transurethral catheter was put in place, and there were no symptoms of cystitis. The patient received chemotherapy for the lymphoma, which produced a partial response. However, the fecaluria continued, and an examination of the small intestine with contrast revealed a thick and irregular wall of the ileum and a fistula between the ileum and UB. A partial resection of the ileum and a partial cystectomy were carried out in April 2011. The surgical specimen demonstrated two tumors 5 cm apart in the ileum, measuring 4.5 × 7 and 4 × 3 cm in size. The proximal tumor had directly invaded the UB and formed an ileovesical fistula. The patient made a good recovery and was doing well 5 months after the surgery without any evidence of recurrence.
Assuntos
Neoplasias do Íleo/complicações , Fístula Intestinal/etiologia , Linfoma Difuso de Grandes Células B/complicações , Fístula da Bexiga Urinária/etiologia , Neoplasias da Bexiga Urinária/complicações , Idoso , Humanos , Neoplasias do Íleo/diagnóstico , Fístula Intestinal/diagnóstico , Linfoma Difuso de Grandes Células B/diagnóstico , Masculino , Fístula da Bexiga Urinária/diagnóstico , Neoplasias da Bexiga Urinária/diagnósticoRESUMO
This study aimed to investigate the visibility of colors in congenitally color vision defect people using general and fluorescent colors in an environment simulating sunset to examine the standards for high-visibility safety clothing for general users. Twenty participants with normal trichromats, seven protanopes, and five deuteranopes were included, with mean ages (± standard deviation) of 21.0±1.0, 46,7±16.1, and 56.6±6.9 years, respectively. Dyed fabrics were used to evaluate visibility. We evaluated brightness and conspicuousness sensitivity by combining red, yellow-red, yellow, green, red-purple, blue, white, black, fluorescent yellow, and fluorescent orange. For brightness sensitivity, the combination of fluorescent yellow and white/yellow stripes was highly visible and significantly different from all other samples (p < 0.05). For conspicuousness sensitivity, the combinations of black/fluorescent yellow, black/yellow, black/white, black/yellow-red, and white/red-purple stripes were highly visible and significantly different from all the other samples (p < 0.05). Yellow light is most visible and even better when fluorescent. They are based on specific spectral sensitivity, and yellow is the most visible, even for congenitally colorblind individuals. Furthermore, with regard to color combinations, it was found that the contrast between two distinct light or dark colors, such as black, yellow, black, and white, is perceived to be equally noticeable by congenital color vision defect individuals. This suggests the possible further applications of safety clothing.
Assuntos
Defeitos da Visão Cromática , Percepção de Cores , HumanosRESUMO
Transition metal dichalcogenides (TMDCs), including MoS2 and WS2, are potential candidates for next-generation semiconducting materials owing to their atomically thin structure and strong optoelectrical responses, which allow for flexible optoelectronic applications. Monolayer TMDCs have been grown utilizing chemical vapor deposition (CVD) techniques. Enhancing the domain size with high crystallinity and forming heterostructures are important topics for practical applications. In this study, the size of monolayer WS2 increased via the vapor-liquid-solid growth-based CVD technique utilizing the confined space of the substrate-stacked microreactor. The use of spin-coated metal salts (Na2WO4 and Na2MoO4) and organosulfur vapor allowed us to precisely control the source supply and investigate the growth in a systematic manner. We obtained a relatively low activation energy for growth (1.02 eV), which is consistent with the surface diffusion-limited growth regime observed in the confined space. Through systematic photoluminescence (PL) analysis, we determined that a growth temperature of â¼820 °C is optimal for producing high-quality WS2 with a narrow PL peak width (â¼35 meV). By controlling the source balance of W and S, we obtained large-sized fully monolayered WS2 (â¼560 µm) and monolayer WS2 with bilayer spots (â¼1100 µm). Combining two distinct sources of transition metals, WS2/MoS2 lateral heterostructures were successfully created. In electrical transport measurements, the monolayer WS2 grown under optimal conditions has a high on-current (â¼70 µA/µm), on/off ratio (â¼5 × 108), and a field-effect mobility of â¼7 cm2/(V s). The field-effect transistor displayed an intrinsic photoresponse with wavelength selectivity that originated from the photoexcited carriers.
RESUMO
We present the device properties of a nickel (Ni)-gallium oxide (Ga2O3) Schottky junction with an interfacial hexagonal boron nitride (hBN) layer. A vertical Schottky junction with the configuration Ni/hBN/Ga2O3/In was created using a chemical vapor-deposited hBN film on a Ga2O3 substrate. The current-voltage characteristics of the Schottky junction were investigated with and without the hBN interfacial layer. We observed that the turn-on voltage for the forward current of the Schottky junction was significantly enhanced with the hBN interfacial film. Furthermore, the Schottky junction was analyzed under the illumination of deep ultraviolet light (254 nm), obtaining a photoresponsivity of 95.11 mA/W under an applied bias voltage (-7.2 V). The hBN interfacial layer for the Ga2O3-based Schottky junction can serve as a barrier layer to control the turn-on voltage and optimize the device properties for deep-UV photosensor applications. Furthermore, the demonstrated vertical heterojunction with an hBN layer has the potential to be significant for temperature management at the junction interface to develop reliable Ga2O3-based Schottky junction devices.
RESUMO
Background: Japan is the world's largest country in terms of the number of long-lived companies, the majority of which are family-owned small and medium-sized enterprises. On the other hand, many business owners will be retiring without successors, and the closure of these small and medium enterprises may have a significant impact on the future economy. The purpose of this study is to explore the growth process of successors in long-lived small and medium-sized manufacturing companies so that potential successors can know what they will experience as managers and be prepared for the future, and professionals who support successors can be provided with information on the growth process of successors to provide appropriate support. Methods: Semi-structured interviews were conducted with six successors of small and medium-sized manufacturing companies that are more than half a century old. Their answers were analyzed using the modified grounded theory approach to construct a hypothetical model. Results: In total, 46 concepts, four categories, 17 subcategories, and one core category with an analysis result diagram were formed. The diagram shows the successors gained confidence in management through the dilemma between autonomy and constraint in the early stage of succession, which was found in previous research. Following the initial stage, the successors responded to the crisis caused by market constraints such as being stuck in a new market, unreasonable treatment from customers, and created autonomous strategies in their businesses. Conclusions: By experiencing repetitive crises, the successors tend to acquire new perspectives toward the naturally occurring crises. This change of premise by the successors is considered as the process of double-loop learning. Relationships inside and outside the company influence the generation of this viewpoint. From a long-term perspective, a sense of unity with employees, stable employment, and the pursuit of enjoyment constitute the successors' values in this model.
Assuntos
Saúde Ocupacional , Comércio , Japão , Pesquisa QualitativaRESUMO
Conventionally, graphene is a poor thermoelectric material with a low figure of merit (ZT) of 10-4-10-3. Although nanostructuring was proposed to improve the thermoelectric performance of graphene, little experimental progress has been accomplished. Here, we carefully fabricated as-grown suspended graphene nanoribbons with quarter-micron length and â¼40 nm width. The ratio of electrical to thermal conductivity was enhanced by 1-2 orders of magnitude, and the Seebeck coefficient was several times larger than bulk graphene, which yielded record-high ZT values up to â¼0.1. Moreover, we observed a record-high electronic contribution of â¼20% to the total thermal conductivity in the nanoribbon. Concurrent phonon Boltzmann transport simulations reveal that the reduction of lattice thermal conductivity is mainly attributed to quasi-ballistic phonon transport. The record-high ratio of electrical to thermal conductivity was enabled by the disparate electron and phonon mean free paths as well as the clean samples, and the enhanced Seebeck coefficient was attributed to the band gap opening. Our work not only demonstrates that electron and phonon transport can be fundamentally tuned and decoupled in graphene but also indicates that graphene with appropriate nanostructures can be very promising thermoelectric materials.
RESUMO
Graphene nanoribbon (GNR), also known as 1-dimensional graphene, with a non-zero band gap has a huge potential for various electrical and optoelectrical applications because of its high transparency, flexibility, controllable band gap, and unique edge states. Recent advances in the synthesis of GNR enable us to show the possibility of GNRs as future high performance electrical devices. However, the applicability of GNRs to optoelectrical devices is unclear. Here we report that suspended GNR devices can show persistent photoconductivity (PPC) with long decay time (over 72 h) and adequate environmental stability. Repeated non-volatile memory operation is also demonstrated with an integrated PPC device using GNRs. This very stable PPC device can be applied to a wide variety of fields such as ultra-low-power non-volatile memory, nanoscale imaging, and biological sensors. Our results have opened the door to advance the study of GNRs in novel directions such as optoelectrical applications.
RESUMO
Adding a mechanical degree of freedom to the electrical and optical properties of atomically thin materials can provide an excellent platform to investigate various optoelectrical physics and devices with mechanical motion interaction. The large scale fabrication of such atomically thin materials with suspended structures remains a challenge. Here we demonstrate the wafer-scale bottom-up synthesis of suspended graphene nanoribbon arrays (over 1,000,000 graphene nanoribbons in 2 × 2 cm(2) substrate) with a very high yield (over 98%). Polarized Raman measurements reveal graphene nanoribbons in the array can have relatively uniform-edge structures with near zigzag orientation dominant. A promising growth model of suspended graphene nanoribbons is also established through a comprehensive study that combined experiments, molecular dynamics simulations and theoretical calculations with a phase-diagram analysis. We believe that our results can contribute to pushing the study of graphene nanoribbons into a new stage related to the optoelectrical physics and industrial applications.
RESUMO
The present study investigated motor expertise in interpersonal competitive ball-over-net sports in terms of a dynamical system with temporal input. In a theoretical framework, the behavior of the system is characterized by a fractal-like structure according to switching input, which changes uniquely according to the duration of input and internal parameter of the system. We investigated periodic movements, in which the player executed a forehand or backhand stroke repeatedly, and continuous switching movements, in which the player continuously switched between two movement patterns corresponding to hitting the ball under two ball directions and with six temporal constraint conditions during a table tennis rally. In the periodic movement, we observed two limit-cycle attractors corresponding to each direction in the phase space independent of temporal constraint or skill level. Conversely, in the continuous switching movement, a transition in trajectories between the two limit-cycle attractors was observed in the phase space, and this transition was characterized by a fractal-like structure. The fractal-like structure moved closer to the random structure as temporal constraint increased independent of skill level. However, the temporal constraint condition closest to the random structure was higher for the advanced players than for the novices, indicating that robustness to the temporal constraint was higher for the advanced players than for the novices. Our results suggest that motor expertise in interpersonal competitive ball-over-net sports is more robust to temporal constraints with various inputs.
Assuntos
Atletas , Desempenho Psicomotor/fisiologia , Tênis , Fractais , Mãos/fisiologia , Humanos , Destreza Motora , Movimento , Tempo de Reação , Esportes , Fatores de TempoRESUMO
Effects of the development of Fe deficiency on changes in Fe and Zn metabolism and its possible interactions with dietary Zn were determined. Adequate (25 microg/g) and marginally deficient (5 microg/g) Zn diets containing a sufficient (40 microg/g) dietary Fe levels were fed for 2 wk. Thereafter, both dietary Zn groups were fed an Fe-deficient (2.2 microg/g) diet for 4 wk. It was found that the effects of an Fe-deficient diet began to occur 7 and 14 d after feeding the Fe-deficient diet. At this time, tissue Fe concentrations were depleted and rats were unable to maintain hemoglobin levels. The Fe-deficient diet also induced an immediate fall in plasma Fe concentration, transferrin saturation, and apparent Fe absorption, while the concentrations of liver cytochrome c increased as Fe deficiency developed. Decreases in liver and spleen Fe levels, as well as the activities of blood and bone marrow aminolevulinic acid dehydratase (ALA-D, EC 4.2.1.24) were observed 3, 7, and 14 d after feeding the Fe-deficient diet, and thereafter they were increased. On the other hand, the activity of plasma alkaline phosphatase (ALK-P, EC 3.1.3.1) decreased continuously as Fe deficiency progressed. With severe development of Fe deficiency, rats fed the Zn-adequate diet had increased levels of Zn concentration in the plasma, liver, spleen, kidney, and femur, whereas apparent Zn absorption was decreased. The decrease in apparent Zn absorption and the increase in tissue Zn concentration of rats might be related to the lowered Zn requirement, which is associated with the depressed Zn metabolism caused by feeding Fe-deficient diets.
Assuntos
Deficiências de Ferro , Zinco/administração & dosagem , Zinco/metabolismo , Absorção , Fosfatase Alcalina/sangue , Fosfatase Alcalina/metabolismo , Animais , Medula Óssea/enzimologia , Citocromos c/metabolismo , Fêmur/metabolismo , Hemoglobinas , Absorção Intestinal/efeitos dos fármacos , Absorção Intestinal/fisiologia , Ferro/sangue , Rim/metabolismo , Fígado/metabolismo , Masculino , Necessidades Nutricionais , Especificidade de Órgãos , Sintase do Porfobilinogênio/metabolismo , Distribuição Aleatória , Ratos , Ratos Wistar , Baço/metabolismo , Distribuição Tecidual , Transferrina/metabolismo , Zinco/sangue , Zinco/deficiênciaRESUMO
In order to determine the interrelationship between dietary iron and zinc levels, the effects of dietary iron levels (2, 10, 20, and 40 microg/g) on changes in iron and zinc status and zinc enzyme activities (aminolevulinic acid dehydratase ALA-D EC 4.2.1.24 and alkaline phosphatase ALK-P EC 3.1.3.1) in male Wistar rats were investigated using adequate and marginally deficient zinc diets (25 and 5 microg/g). When rats were fed 5 microg Zn/g diets, body weight gain and food intake remained unchanged at a Fe diet intake of 20 microg/g or greater. Similar tendencies were obtained for hemoglobin, hematocrit, plasma iron, and transferrin saturation. In contrast, liver, spleen, and femur iron concentrations increased gradually with increased iron intake. Feeding diets containing 25 microg Zn/g did not alter these parameters. The percentages of apparent iron absorption in both dietary zinc groups tended to increase with decreasing dietary iron and attained maximum levels at an Fe intake of 10 microg/g. However, In the case of rats fed Fe at concentrations of 2 microg/g Iron absorption decreased. Regardless of the dietary zinc level, rats fed diets with an Fe concentration of 2 microg/g had decreased zinc absorption and plasma ALK-P activity. However, ALA-D activity was not influenced by dietary iron.