Periodically Twisted Molecular Wires Based on a Fused Unit for Efficient Intramolecular Hopping Transport.

Realizing efficient long-distance intramolecular charge transport based on a hopping mechanism is a key challenge in molecular electronics. In hopping transport, a smaller reorganization energy (λ) and energy difference between hopping sites (ΔEhs) should lead to a smaller activation energy and faster charge transfer. However, the development of π-extended molecules that meet these requirements is challenging. In this study, we successfully synthesized several nanometer-scale π-extended molecules composed of a fused π-conjugated unit as a hopping site for reducing λ. Conformational twists between fused units effectively localize π-conjugation in each unit, contributing to reducing ΔEhs. The expected electronic structures of the oligomers were confirmed using spectroscopic and electrochemical measurements. Single-molecule conductance measurements exhibited higher conductance and lower activation energy than those of nonfused oligothiophenes. First-principles calculations indicated that smaller λ and ΔEhs values explain the high conductance. These results highlight the efficiency of the proposed molecular design for effective intramolecular hopping transport.

Dynamic Variation of Rectification Observed in Supramolecular Mixed Mercaptoalkanoic Acid.

Functionality in molecular electronics relies on inclusion of molecular orbital energy level within a transmission window. This can be achieved by designing the active molecule with accessible energy levels or by widening the window. While many studies have adopted the first approach, the latter is challenging because defects in the active molecular component cause low breakdown voltages. Here, it is shown that control over the packing structure of monolayer via supramolecular mixing transforms an inert molecule into a highly tunable rectifier. Binary mixed monolayer composed of alkanethiolates with and without carboxylic acid head group as a proof of concept is formed via a surface-exchange reaction. The monolayer withstands high voltages up to |4.5 V| and shows a dynamic rectification-external bias relationship in magnitude and polarity. Sub-highest occupied molecular orbital (HOMO) levels activated by the widened transmission window account for these observations. This work demonstrates that simple supramolecular mixing can imbue new electrical properties in electro-inactive organic molecules.

6,6'-Biindeno[1,2-b]anthracene: An Open-Shell Biaryl with High Diradical Character.

We report in situ generation of a 6,6'-biindeno[1,2-b]anthracene (BIA) derivative as an open-shell biaryl with high diradical character, which could be identified by mass spectrometry, NMR spectroscopy, single-crystal X-ray analysis, UV-vis-NIR absorption spectroscopy, and electron paramagnetic resonance (EPR) spectroscopy. Theoretical calculations by various methods and variable-temperature EPR analyses were performed to tackle the elusive ground state of BIA diradical, suggesting a singlet ground state with a nearly degenerate triplet state. These results provide insight into the design of unique open-shell biaryls.

Magnetoresistance originated from the Au/S interface in Au/1,6-hexanedithiol/Au single-molecule junctions at room temperature.

We report a magnetic response of Au/1,6-hexanedithiol/Au single-molecule junctions at room temperature using a mechanically controllable break junction method. The electrical resistance of the junction was found to increase up to 5.5% under a magnetic field. This phenomenon could originate from the unpaired charge at the Au/S interface.

Thermopower in Transition from Tunneling to Hopping.

The Seebeck effect of a molecular junction in a hopping regime or tunneling-to-hopping transition remains uncertain. This paper describes the Seebeck effect in molecular epitaxy films (OPIn where n = 1-9) based on imine condensation between an aryl amine and aldehyde and investigates how the Seebeck coefficient (S, µV/K) varies at the crossover region. The S value of OPIn linearly increased with increasing the molecular length (d, nm), ranging from 7.2 to 38.0 µV/K. The increasing rate changed from 0.99 to 0.38 µV·K-1 Å-1 at d = 3.4 nm (OPI4). Combined experimental and theoretical studies indicated that such a change stems from a tunneling-to-hopping transition, and the small but detectable length-dependence of thermopower in the long molecules originates from the gradual reduction of the tunneling contribution to the broadening of molecular orbital energy level, rather than its relative position to the Fermi level. Our work helps to bridge the gap between bulk and nanoscale thermoelectric systems.

Controlling the Emissive, Chiroptical, and Electrochemical Properties of Double [7] Helicenes through Embedded Aromatic Rings.

We present here the synthesis and in-depth physicochemical characterization of a double hetero[7]helicene fused with four triazole rings at both helical ends. The comparison of this triazole-fused double helicene with the previously reported all-carbon and thiadiazole-fused analogs revealed the huge impact of the embedded aromatic rings on the photophysical features. The small structural variation of the terminal rings from thiadiazole to triazole caused a dramatic change of the photoluminescence quantum yields (PLQYs) from <1 % to 96 %, while the replacement of the terminal benzene rings with triazole rings induced a tenfold enhancement of the circularly polarized luminescence dissymmetry factor. These observations were well corroborated with transient absorption analysis and/or theoretic calculations. In addition, the triazole-fused double helicene exhibited ambipolar redox behavior, enabling the generation of radical cation and anion species by electrochemical and chemical methods and showing its potential for spin-related applications.

Rhodium-Catalyzed Stitching Polymerization of Alkynylsilylacetylenes.

Polymers possessing a silicon-bridged π-conjugated repeating unit constitute an important class of compounds for their potential utility as optoelectronic materials. Herein we developed a rhodium-catalyzed stitching polymerization of nonconjugated and readily prepared alkynylsilylacetylenes for the synthesis of new π-conjugated polymers with ladder-type silicon-bridged repeating units. The polymerization proceeded smoothly by employing a Rh/tfb complex as the catalyst, and not only diynes but also triynes and tetraynes could be polymerized in a stitching manner to give polymers that are inaccessible by existing methods. The solubility of the polymers in different types of solvents could be controlled by introducing appropriate functional groups on the silicon atoms, and sequence-controlled functionalized polyacetylenes could be accessed by protodesilylation of the stitched polymers. Physical properties of the obtained polymers were also investigated to understand their characteristic features.

Improving Intramolecular Hopping Charge Transport via Periodical Segmentation of π-Conjugation in a Molecule.

The development of several-nanometer-scale π-conjugated systems for efficient intramolecular hopping charge transport remains a significant challenge. To construct localized electronic structures at the same energy in a molecule, a series of oligothiophenes, with lengths up to 10 nm and periodically twisted structures, was synthesized. Single-molecule conductance measurements of the twisted molecules revealed resistances lower than those of planar oligothiophenes. This study provides a rational molecular design to improve the intramolecular hopping charge transport in materials.

Single-Molecule Conductance of a π-Hybridized Tripodal Anchor while Maintaining Electronic Communication.

Direct hybridization between the π-orbital of a conjugated molecule and metal electrodes is recognized as a new anchoring strategy to enhance the electrical conductance of single-molecule junctions. The anchor is expected to maintain direct hybridization between the conjugated molecule and the metal electrodes, and control the orientation of the molecule against the metal electrodes. However, fulfilling both requirements is difficult because multipodal anchors aiming at a robust contact with the electrodes often break the π-conjugation, thereby resulting in an inefficient carrier transport. Herein, a new tripodal anchor framework-a 7,7-diphenyl-7H-benzo[6,7]indeno[1,2-b]thiophene (PBIT) derivative-is developed. In this framework, π-conjugation is maintained in the molecular junction, and the tripodal structure makes the molecule stand upright on the metal electrode. Molecular conductance is measured by the break junction technique. A vector-based classification and first-principles transport calculations determine the single-molecule conductance of the tripodal-anchoring structure. The conductance of the PBIT-based molecule is higher than that of the tripodal anchor having sp3 carbon atoms in the carrier transport pathway. These results demonstrate that extending the π-conjugation to the tripodal leg is an effective strategy for enhancing the conductivities of single-molecule junctions.

Structure and dynamics of water at water-graphene and water-hexagonal boron-nitride sheet interfaces revealed by ab initio sum-frequency generation spectroscopy.

We simulate sum-frequency generation (SFG) spectra of isotopically diluted water at the water-graphene and water-hexagonal boron-nitride (hBN) sheet interfaces, using ab initio molecular dynamics simulations. A sharp 'dangling' O-D peak around ∼2640 cm-1 appearing in both simulated SFG spectra evidences that both graphene and hBN are hydrophobic. The dangling O-D peak is 10 cm-1 red-shifted at the water-hBN interface relative to the peak at the water-graphene interface. This frequency difference gives a stronger O-DN intermolecular interaction between water and hBN than the O-DC interaction between water and graphene. Accordingly, the anisotropy decay of such a dangling O-D group slows down near hBN compared with near graphene, illustrating that the dynamics of the dangling O-D group are also affected by the stronger O-DN interaction than the O-DC interaction. We discuss molecular-level insights into the structure and dynamics of interfacial water in the context of the friction of hBN and graphene.

Multifunctional Octamethyltetrasila[2.2]cyclophanes: Conformational Variations, Circularly Polarized Luminescence, and Organic Electroluminescence.

Both symmetrical and unsymmetrical cyclophanes containing disilane units, tetrasila[2.2]cyclophanes 1-9, were synthesized. The syn and anti conformations and the kinetics of inversion between two anti-isomers were investigated by X-ray diffraction and variable-temperature NMR analysis, respectively. The flipping motion of two aromatic rings was affected by the bulkiness of the aromatic moiety (1 vs 6), the phase (solid vs solution), and the inclusion by host molecules (1 vs 1⊂[Ag2L]2+). The photophysical, electrochemical, and structural properties of the compounds were thoroughly investigated. Unsymmetrical tetrasila[2.2]cyclophanes 5-8 displayed blue-green emission arising from intramolecular charge transfer. Compound 6 emitted a brilliant green light in the solid state under 365 nm irradiation and showed a higher fluorescence quantum yield in the solid state (Φ = 0.49) than in solution (Φ = 0.05). We also obtained planar chiral tetrasila[2.2]cyclophane 9, which showed interesting chiroptical properties, such as a circularly polarized luminescence (CPL) with a dissymmetry factor of |glum| = ca. 2 × 10-3 at 500 nm. Moreover, an organic green light-emitting diode that showed a maximum external quantum efficiency (ηext) of ca. 0.4% was fabricated by doping 4,4'-bis(2,2'-diphenylvinyl)-1,1'-biphenyl with 6.

Effective Method for Micro-Patterning Arene-Terminated Monolayers on a Si(111) Electrode.

Microstructured electrodes are significant to modern electrochemistry. A representative aromatic group, 4-ferrocenylphenyl one, was covalently bound to a micropatterned silicon electrode via the arylation of a hydrogen-terminated silicon(111) surface formed selectively on a Si wafer. Starting from a silicon(100)-on-insulator (SOI) wafer, the aromatic monolayer was attached sequentially by spin-coating a resist, electron beam lithography, Cr/Au deposition, lift-off, anisotropic etching with aqueous KOH solution, and Pd-catalyzed arylation. Cyclic voltammetry (CV) and X-ray photoelectron spectroscopy (XPS) are used to characterize the coupling reaction between 4-ferrocenyl group and silicon substrate, and to confirm performance of the final modified microsized electrode. These data show that this synthetic protocol gives chemically well-defined and robust functionalized monolayers on a silicon semiconducting surface with a small electrode.

Thermopower of benzenedithiol and C60 molecular junctions with Ni and Au electrodes.

We have performed thermoelectric measurements of benzenedithiol (BDT) and C60 molecules with Ni and Au electrodes using a home-built scanning tunneling microscope. The thermopower of C60 was negative for both Ni and Au electrodes, indicating the transport of carriers through the lowest unoccupied molecular orbital in both cases, as was expected from the work functions. On the other hand, the Ni-BDT-Ni junctions exhibited a negative thermopower, whereas the Au-BDT-Au junctions exhibited a positive thermopower. First-principle calculations revealed that the negative thermopower of Ni-BDT-Ni junctions is due to the spin-split hybridized states generated by the highest occupied molecular orbital of BDT coupled with s- and d-states of the Ni electrode.

Synthesis, properties, and n-type transistor characteristics of π-conjugated compounds having a carbonyl-bridged thiazole-fused polycyclic system.

A series of electron-deficient π-conjugated systems with 4,9-dihydro-s-indaceno[2,1-d:6,5-d']dithiazole-4,9-dione-based structures and fluorinated acyl groups as the terminal units have been designed and synthesized for application as organic field-effect transistor (OFET) materials. The thermal, photophysical, and electrochemical properties and OFET performance of the synthesized compounds were investigated. OFET evaluation revealed that all compounds exhibited typical electron-transporting characteristics, and electron mobilities up to 0.26 cm(2) V(-1) s(-1) could be achieved. The air stabilities of OFET operation were dependent on the nature of the compounds and were investigated by X-ray diffraction and atomic force microscopy. The terminal units had a great influence not only on the molecular properties, but also on the film-forming properties and OFET performance.

Interfacial negative magnetization in Ni encapsulated layer-tunable nested MoS2 nanostructure with robust memory applications.

Combining interfacial interactions and layer-number tunability, the evolution of magnetism in low-dimensional diamagnetic systems like MoS2 is indeed an interesting area of research. To explore this, Ni nanophases with an average size of 12 nm were encapsulated in MoS2 and the magnetization dynamics were studied over the temperature range of 2-300 K. Surprisingly, the newly formed hybrid nanostructure was found to have a negative magnetization state with giant exchange bias that showed a reversible temperature-induced increase in both spin magnetic moment and coercivity. Density functional theory calculations proved an interfacial charge transfer interaction with a spin-polarized density of states. The magnetization state, along with giant exchange correlation among the magnetic clusters, suggested the possibility of robust thermomagnetic memory. The dc magnetization and relaxation, investigated with different measurement protocols, unveiled robust thermoremanent magnetization as a memory effect. The time-dependent magnetization study indicated that contributions from the negative magnetization state along with charge transfer induced spin states are responsible for the memory effect, which can be controlled by both temperature and external field.

Reservoir computing with the electrochemical formation and reduction of gold oxide in aqueous solutions with a three-electrode electrochemical setup.

Supervised classification of handwritten digits via physical reservoir computing (PRC) using electrochemistry with a three-electrode electrochemical setup was demonstrated. Short-term memory required for the PRC was realized for 3 bit pulse patterns by adjusting the formation/reduction ratio of gold oxides, showing a wide potential of electrochemistry as resources of PR devices.

Corrosion-Resistant and High-Entropic Non-Noble-Metal Electrodes for Oxygen Evolution in Acidic Media.

To realize a sustainable hydrogen economy, corrosion-resistant non-noble-metal catalysts are needed to replace noble-metal-based catalysts. The combination of passivation elements and catalytically active elements is crucial for simultaneously achieving high corrosion resistance and high catalytic activity. Herein, the self-selection/reconstruction characteristics of multi-element (nonary) alloys that can automatically redistribute suitable elements and rearrange surface structures under the target reaction conditions during the oxygen evolution reaction are investigated. The following synergetic effect (i.e., cocktail effect), among the elements Ti, Zr, Nb, and Mo, significantly contributes to passivation, whereas Cr, Co, Ni, Mn, and Fe enhance the catalytic activity. According to the practical water electrolysis experiments, the self-selected/reconstructed multi-element alloy demonstrates high performance under a similar condition with proton exchange membrane (PEM)-type water electrolysis without obvious degradation during stability tests. This verifies the resistance of the alloy to corrosion when used as an electrode under a practical PEM electrolysis condition.

Spinterface Effects in Hybrid La0.7Sr0.3MnO3/SrTiO3/C60/Co Magnetic Tunnel Junctions.

Orbital hybridization at the Co/C60 interface been has proved to strongly enhance the magnetic anisotropy of the cobalt layer, promoting such hybrid systems as appealing components for sensing and memory devices. Correspondingly, the same hybridization induces substantial variations in the ability of the Co/C60 interface to support spin-polarized currents and can bring out a spin-filtering effect. The knowledge of the effects at both sides allows for a better and more complete understanding of interfacial physics. In this paper we investigate the Co/C60 bilayer in the role of a spin-polarized electrode in the La0.7Sr0.3MnO3/SrTiO3/C60/Co configuration, thus substituting the bare Co electrode in the well-known La0.7Sr0.3MnO3/SrTiO3/Co magnetic tunnel junction. The study revealed that the spin polarization (SP) of the tunneling currents escaping from the Co/C60 electrode is generally negative: i.e., inverted with respect to the expected SP of the Co electrode. The observed sign of the spin polarization was confirmed via DFT calculations by considering the hybridization between cobalt and molecular orbitals.

Air-stable n-type organic field-effect transistors based on solution-processable, electronegative oligomers containing dicyanomethylene-substituted cyclopenta[b]thiophene.

Solution-processable, electronegative, π-conjugated systems containing dicyanomethylene-substituted cyclopenta[b]thiophene were synthesized as potential active materials for air-stable n-type organic field-effect transistors (OFETs). Electrochemical measurements revealed that these compounds exhibited electrochemical stability and that the lowest unoccupied molecular orbital (LUMO) had an energy level less than -4.0 eV. Flash-photolysis time-resolved microwave conductivity (FP-TRMC) measurements were performed, and the value of intradomain electron mobility was determined to be as high as 0.1 cm(2) V(-1) s(-1) . The OFETs were fabricated by spin-coating thin films of the compounds as an active layer. The electron mobility of the OFETs was 3.5×10(-3) cm(2) V(-1) s(-1) in vacuum. Furthermore, electron mobility of the same order of magnitude and stable characteristics were obtained under air-exposed conditions. X-ray diffraction measurements of the spin-coated thin films revealed the difference of molecular arrangements depending on the inner conjugated units. Atomic force microscopy measurements of crystalline-structured films exhibited the formation of grains. The accomplishment of air-stability was attributed to the combined effect of the low-lying LUMO energy level and the molecular arrangements in the solid state, avoiding both the quenching of electron carriers and the intrusion of oxygen and/or moisture.

Electron-transporting oligothiophenes containing dicyanomethylene-substituted cyclopenta[b]thiophene: chemical tuning for air stability in OFETs.

We have synthesized new electron-transporting oligothiophenes containing dicyanomethylene-substituted cyclopenta[b]thiophene as an active material for the fabrication of solution-processable n-type organic field-effect transistors (OFETs). The influence of the number of dicyanomethylene groups as well as the position of hexyl groups was investigated in detail by performing photophysical and electrochemical measurements. Results revealed that the optical energy gaps and the lowest unoccupied molecular orbital (LUMO) energy levels can be controlled by changing the number of dicyanomethylene groups. In contrast, the position of hexyl groups has little influence on molecular electronic properties. X-ray diffraction and atomic force microscopy measurements revealed that spin-coated thin films of the new compounds had a crystalline structure. OFETs based on these compounds were evaluated in vacuum and air-exposed conditions, and the electron mobility of up to 0.016 cm(2) V(-1) s(-1) was achieved. Furthermore, we demonstrated that the air stability of the OFETs depends on the LUMO energy level of the compounds.