RESUMO
A straightforward method to prepare surface enhanced Raman spectroscopy (SERS) chips containing a monolayer of silver coated gold nanostars (GNS@Ag) grafted on a glass surface is introduced. The synthetic approach is based on a seed growth method performed directly on surface, using GNS as seeds, and involving a green pathway, which only uses silver nitate, ascorbic acid and water, to grow the silver shell. The preparation was optimized to maximize signals obtaining a SERS response of one order of magnitude greater than that from the original GNS based chips, offering in the meantime good homogeneity and acceptable reproducibility. The proposed GNS@Ag SERS chips are able to detect pesticide thiram down to 20 ppb.
RESUMO
Decoration of semiconductor photocatalysts with cocatalysts is generally done by a step-by-step assembly process. Here, we describe the self-assembling and self-activating nature of a photocatalytic system that forms under illumination of reduced anatase TiO2 nanoparticles in an aqueous Ni2+ solution. UV illumination creates in situ a Ni+/TiO2/Ti3+ photocatalyst that self-activates and, over time, produces H2 at a higher rate. In situ X-ray absorption spectroscopy and electron paramagnetic resonance spectroscopy show that key to self-assembly and self-activation is the light-induced formation of defects in the semiconductor, which enables the formation of monovalent nickel (Ni+) surface states. Metallic nickel states, i.e., Ni0, do not form under the dark (resting state) or under illumination (active state). Once the catalyst is assembled, the Ni+ surface states act as electron relay for electron transfer to form H2 from water, in the absence of sacrificial species or noble metal cocatalysts.
RESUMO
A synthetic approach has been developed to prepare silica gel monoliths that embed well separated silver or gold spherical nanoparticles (NP), with diameters of 8, 18 and 115 nm. Fe3+, O2/cysteine and HNO3 were all successfully used to oxidize and remove silver NP from silica, while aqua regia was necessary for gold NP. In all cases, NP-imprinted silica gel materials were obtained, with spherical voids of the same dimensions of the dissolved particles. By grinding the monoliths, we prepared NP-imprinted silica powders that were able to efficiently reuptake silver ultrafine NP (Ag-ufNP, d = 8 nm) from aqueous solutions. Moreover, the NP-imprinted silica powders showed a remarkable size selectivity, based on the best match between NP radius and the curvature radius of the cavities, driven by the optimization of attractive Van der Waals forces between SiO2 and NP. Ag-ufNP are increasingly used in products, goods, medical devices, disinfectants, and their consequent diffusion in the environment is of rising concern. Although limited here to a proof-of-concept level, the materials and methods described in this paper may be an efficient solution for capturing Ag-ufNP from environmental waters and to safely dispose them.
RESUMO
A radical anion -NO2 .- is formed upon an electrochemically reversible one-electron reduction of the square-planar NiII complex of N-nitrobenzylcyclam. The -NO2 .- group goes to occupy an axial position of the metal ion, thus establishing a significant electronic interaction with the metal center. In particular, the ESR spectrum supports the occurrence of an electron transfer from -NO2 .- to the metal, which therefore presents a significant NiI character. On re-oxidation, the nitrobenzyl side chain detaches and the NiII complex is restored, providing an example of a fully reversible redox driven intramolecular motion.
RESUMO
BACKGROUND: Macroaggregated human serum albumin (MAA) properties are widely used in nuclear medicine, labelled with 99mTc. The aim of this study is to improve the knowledge about the morphology, size, dimension and physical-chemical characteristics of MAA and their bond with 99mTc and 68Ga. METHODS: Commercial kits of MAA (Pulmocis®) were used. Characterisation through experiments based on SEM, DLS and Stokes' Law were carried out. In vitro experiments for Langmuir isotherms and pH studies on radiolabelling were performed and the stability of the radiometal complex was verified through competition reactions. RESULTS: The study settles the MAA dimension within the range 43-51 µm. The Langmuir isotherm reveals for [99mTc]MAA: Bmax (46.32), h (2.36); for [68Ga]MAA: Bmax (44.54), h (0.893). Dual labelling reveals that MAA does not discriminate different radioisotopes. Experiments on pH placed the optimal pH for labelling with 99mTc at 6. CONCLUSION: Radiolabelling of MAA is possible with high efficiency. The nondiscriminatory MAA bonds make this drug suitable for radiolabelling with different radioisotopes or for dual labelling. This finding illustrates the need to continue investigating MAA chemical and physical characteristics to allow for secure labelling with different isotopes.
Assuntos
Radioisótopos de GálioRESUMO
In this paper, we report on the preparation of Imidazole-functionalized glass surfaces, demonstrating the ability of a dinuclear Cu(II) complex of a macrocyclic ligand to give a "cascade" interaction with the deprotonated forms of grafted imidazole moieties. In this way, we realized a prototypal example of an antimicrobial surface based on a supramolecular approach, obtaining a neat microbicidal effect using low amounts of the described copper complex.
Assuntos
Antibacterianos , Cobre , Antibacterianos/farmacologia , Vidro , Imidazóis/farmacologia , LigantesRESUMO
The photothermal properties of nanoparticles (NPs), that is, their ability to convert absorbed light into heat, have been studied since the end of the last century, mainly on gold NPs. In the new millennium, these studies have developed into a burst of research dedicated to the photothermal ablation of tumors. However, beside this strictly medical theme, research has also flourished in the connected areas of photothermal antibacterial surface coatings, gels and polymers, of photothermal surfaces for cell stimulation, as well as in purely technological areas that do not involve medical biotechnology. These include the direct conversion of solar light into heat, a more efficient sun-powered generation of steam and the use of inkjet-printed patterns of photothermal NPs for anticounterfeit printing based on temperature reading, to cite but a few. After an analysis of the photothermal effect (PTE) and its mechanism, this minireview briefly considers the antitumor-therapy theme and takes an in-depth look at all the other technological and biomedical applications of the PTE, paying particular attention to photothermal materials whose NPs have joined those based on Au.
Assuntos
Nanopartículas Metálicas , Nanopartículas , Ouro , Temperatura Alta , Polímeros , TemperaturaRESUMO
SERS tags are a class of nanoparticles with great potential in advanced imaging experiments. The preparation of SERS tags however is complex, as they suffer from the high variability of the SERS signals observed even at the slightest sign of aggregation. Here, we developed a method for the preparation of SERS tags based on the use of gold nanostars conjugated with neutravidin. The SERS tags here obtained are extremely stable in all biological buffers commonly employed and can be prepared at a relatively large scale in very mild conditions. The obtained SERS tags have been used to monitor the expression of fibroblast activation protein alpha (FAP) on the membrane of primary fibroblasts obtained from patients affected by Crohn's disease. The SERS tags allowed the unambiguous identification of FAP on the surface of cells thus suggesting the feasibility of semi-quantitative analysis of the target protein. Moreover, the use of the neutravidin-biotin system allows to apply the SERS tags for any other marker detection, for example, different cancer cell types, simply by changing the biotinylated antibody chosen in the analysis.
Assuntos
Endopeptidases/genética , Proteínas de Membrana/genética , Nanopartículas Metálicas/química , Miofibroblastos/metabolismo , Octoxinol/química , Análise Espectral Raman/métodos , Avidina/química , Biotina/química , Doença de Crohn/genética , Doença de Crohn/metabolismo , Doença de Crohn/patologia , Endopeptidases/análise , Endopeptidases/metabolismo , Expressão Gênica , Ouro/química , Humanos , Íleo/metabolismo , Íleo/patologia , Proteínas de Membrana/análise , Proteínas de Membrana/metabolismo , Nanopartículas Metálicas/ultraestrutura , Miofibroblastos/patologia , Polietilenoglicóis/química , Cultura Primária de Células , Coloração e RotulagemRESUMO
When using gold nanoparticle (AuNP) inks for writing photothermal readable secure information, it is of utmost importance to obtain a sharp and stable shape of the localized surface plasmon resonance (LSPR) absorption bands in the prints. The T increase at a given irradiation wavelength (DTl) is the retrieved information when printed patterns are interrogated with a laser source. As DTl is proportional to the absorbance at the wavelength l, any enlargement or change of the absorbance peak shape in a printed pattern would lead to wrong or unreliable reading. With the aim of preparing AuNP inks suitable for inkjet printing of patterns with stable and reliable photothermal reading, we prepared liquid solutions of spherical AuNP coated with a series of different polymers and with or without additional dispersant. The optical stability of the inks and of the printed patterns were checked by monitoring the shape changes of the sharp LSPR absorption band of AuNP in the visible (lmax 519 nm) along weeks of ageing. AuNP coated with neutral polyethylenglycol thiols (HS-PEG) of mw 2000-20,000 showed a strong tendency to rapidly agglomerate in the dry prints. The close contact between agglomerated AuNP resulted in the loss of the pristine shape of the LSPR band, that flattened and enlarged with the further appearance of a second maximum in the Near IR, due to plasmon hybridization. The tendency to agglomerate was found directly proportional to the PEG mw. Addition of the ethylcellulose (EC) dispersant to inks resulted in an even stronger and faster tendency to LSPR peak shape deformation in the prints due to EC hydrophobicity, that induced AuNP segregation and promoted agglomeration. The introduction of a charge on the AuNP coating revelead to be the correct way to avoid agglomeration and obtain printed patterns with a sharp LSPR absorption band, stable with ageing. While the use of a simple PEG thiol with a terminal negative charge, HS-PEGCOO(-) (mw 3000), was not sufficient, overcoating with the positively charged polyallylamine hydrochloride (PAH) and further overcoating with the negatively charged polystyrene sulfonate (PSS) yielded AuNP@HS-PEGCOO(-)/PAH(+) and AuNP@HS-PEGCOO(-)/PAH(+)/PSS(-), both giving stable prints. With these inks we have shown that it is possible to write photothermally readable secure information. In particular, the generation of reliable three-wavelength photothemal barcodes has been demonstrated.
Assuntos
Ouro/química , Nanopartículas Metálicas/química , Polímeros/química , Ressonância de Plasmônio de SuperfícieRESUMO
Silver nanoparticles were produced with AgF as the starting Ag(I) salt, with pectin as the reductant and protecting agent. While the obtained nanoparticles (pAgNP-F) have the same dimensional and physicochemical properties as those already described by us and obtained from AgNO3 and pectin (pAgNP-N), the silver nanoparticles from AgF display an increased antibacterial activity against E. coli PHL628 and Staphylococcus epidermidis RP62A (S. epidermidis RP62A), both as planktonic strains and as their biofilms with respect to pAgNP-N. In particular, a comparison of the antimicrobial and antibiofilm action of pAgNP-F has been carried out with pAgNP-N, pAgNP-N and added NaF, pure AgNO3, pure AgF, AgNO3 and added NaF and pure NaNO3 and NaF salts. By also measuring the concentration of the Ag+ cation released by pAgNP-F and pAgNP-N, we were able to unravel the separate contributions of each potential antibacterial agent, observing an evident synergy between p-AgNP and the F- anion: the F- anion increases the antibacterial power of the p-AgNP solutions even when F- is just 10 µM, a concentration at which F- alone (i.e., as its Na+ salt) is completely ineffective.
Assuntos
Antibacterianos/química , Biofilmes/efeitos dos fármacos , Fluoretos/química , Nanopartículas Metálicas/química , Compostos de Prata/química , Prata/química , Antibacterianos/farmacologia , Escherichia coli/efeitos dos fármacos , Escherichia coli/fisiologia , Plâncton/efeitos dos fármacos , Plâncton/microbiologia , Staphylococcus epidermidis/efeitos dos fármacos , Staphylococcus epidermidis/fisiologiaRESUMO
Antibacterial treatment is an essential issue in many diverse fields, from medical device treatments (for example prostheses coating) to food preservation. However, there is a need of novel and light-weight materials with high antibacterial efficiency (preferably due to the physical activation). Utilization of photo-thermally active nanoparticles can lead to novel and re-usable materials that can be remotely activated on-demand to thermally eradicate bacteria and mitigate biofilm formation, therefore meeting the above challenge. In this study polyvinyl alcohol (PVA) hydrogel films containing non-toxic and highly photo-thermally active Prussian blue (PB) nanoparticles were fabricated. The confocal microscopy studies indicated a uniform nanoparticle distribution and a low degree of aggregation. Upon near-infrared (NIR; 700 and 800 nm) light irradiation of PVA-PB films, the local temperature increases rapidly and reaches a plateau (up to ΔT â 78 °C), within ≈6-10 s under relatively low laser intensities, I â 0.3 W cm-2. The high and localized increase of temperature on the fabricated films resulted in an efficient antibacterial effect on Pseudomonas aeruginosa (P. aeruginosa) bacteria. In addition, the localized photo-thermal effect was also sufficient to substantially mitigate biofilms growth.
Assuntos
Antibacterianos/síntese química , Biofilmes/efeitos dos fármacos , Ferrocianetos/química , Nanopartículas/química , Fototerapia/métodos , Álcool de Polivinil/química , Ferrocianetos/farmacologia , Temperatura Alta , Lasers , Terapia com Luz de Baixa Intensidade/métodos , Álcool de Polivinil/farmacologia , Pseudomonas aeruginosa/efeitos dos fármacos , Pseudomonas aeruginosa/fisiologiaRESUMO
Prussian blue (PB) is a coordination polymer studied since the early 18th century, historically known as a pigment. PB can be prepared in colloidal form with a straightforward synthesis. It has a strong charge-transfer absorption centered at ~700 nm, with a large tail in the Near-IR range. Irradiation of this band results in thermal relaxation and can be exploited to generate a local hyperthermia by irradiating in the so-called bio-transparent Near-IR window. PB nanoparticles are fully biocompatible (PB has already been approved by FDA) and biodegradable, this making them ideal candidates for in vivo use. While papers based on the imaging, drug-delivery and absorbing properties of PB nanoparticles have appeared and have been reviewed in the past decades, a very recent interest is flourishing with the use of PB nanoparticles as photothermal agents in biomedical applications. This review summarizes the syntheses and the optical features of PB nanoparticles in relation to their photothermal use and describes the state of the art of PB nanoparticles as photothermal agents, also in combination with diagnostic techniques.
Assuntos
Ferrocianetos/química , Nanopartículas/química , Células HeLa , Humanos , Hipertermia Induzida/métodos , Microscopia Eletrônica de Transmissão , Espectroscopia de Luz Próxima ao InfravermelhoRESUMO
The stability of thiol bonding on the surface of star-shaped gold nanoparticles was studied as a function of temperature in water and in a set of biologically relevant conditions. The stability was evaluated by monitoring the release of a model fluorescent dye, Bodipy-thiol (BDP-SH), from gold nanostars (GNSs) cocoated with poly(ethylene glycol) thiol (PEG-SH). The increase in the BDP-SH fluorescence emission, quenched when bound to the GNSs, was exploited to this purpose. A maximum 15% dye release in aqueous solution was found when the bulk temperature of gold nanostars solutions was increased to T = 42 °C, the maximum physiological temperature. This fraction reduces 3-5% for temperatures lower than 40 °C. Similar results were found when the temperature increase was obtained by laser excitation of the near-infrared (NIR) localized surface plasmon resonance of the GNSs, which are photothermally responsive. Besides the direct impact of temperature, an increased BDP-SH release was observed upon changing the chemical composition of the solvent from pure water to phosphate-buffered saline and culture media solutions. Moreover, also a significant fraction of PEG-SH was released from the GNS surface due to the increase in temperature. We monitored it with a different approach, that is, by using a coating of α-mercapto-ω-amino PEG labeled with tetramethylrhodamine isothiocyanate on the amino group, that after heating was separated from GNS by ultracentrifugation and the released PEG was determined by spectrofluorimetric techniques on the supernatant solution. These results suggest some specific limitations in the use of the gold-thiolate bond for coating of nanomaterials with organic compounds in biological environments. These limitations come from the duration and the intensity of the thermal treatment and from the medium composition and could also be exploited in biological media to modulate the in vivo release of drugs.
Assuntos
Ouro/química , Nanopartículas Metálicas/química , Nanoestruturas/química , Compostos de Sulfidrila/química , Propriedades de SuperfícieRESUMO
The synthesis and the physico-chemical characterisation of a novel solid phase, designed for iron(iii) sorption, are presented. The solid (indicated in the following as DFO-SAMMS) is made with a hydroxamate siderophore, the deferoxamine (DFO), covalently bound on a self-assembled monolayer on mesoporous silica (SAMMS). The data demonstrate that the DFO molecules are bound to the solid material, grafted on the surface and do not enter the silica pores. A new one-pot synthesis is presented in which DFO is dissolved in DMSO, and left to react with GPTMS with stirring overnight. In the same mixture, SAMMS is added to get the final product. The optimisation of experimental conditions of this novel one-pot synthesis is presented, with results indicating that a temperature of 90 °C, for the reaction between DFO and GPTMS, and the use of MCM-41 silica are the most convenient conditions. The kinetics of sorption reveals that the iron uptake is relatively fast, around 100 min at pH = 2.5, and from the sorption profile of iron(iii), the estimated capacity of the product obtained under optimized conditions was higher than 0.3 mmol g(-1). The results found in the present research are very promising for application in real biological samples.
Assuntos
Desferroxamina/química , Compostos Férricos/isolamento & purificação , Ferro/isolamento & purificação , Sideróforos/química , Dióxido de Silício/química , Adsorção , Cinética , Espectroscopia de Infravermelho com Transformada de FourierRESUMO
Prussian Blue nanoparticles (PBnps) are now popular in nanomedicine thanks to the FDA approval of PB. Despite the numerous papers suggesting or describing the in vivo use of PBnps, no studies have been carried out on the formation of a protein corona on the PBnp surface and its stabilizing role. In this paper, we studied qualitatively and quantitatively the corona formed by the most abundant protein of blood, human serum albumin (HSA). Cubic PBnps (41 nm side), prepared in citric acid solution at PB concentration 5 × 10-4 M, readily form a protein corona by redissolving ultracentrifuged PBnp pellets in HSA solutions, with CHSA ranging from 0.025 to 7.0 mg/mL. The basic decomposition of PBnp@HSA was studied in phosphate buffer at the physiological pH value of 7.4. Increased stability with respect to uncoated PBnps was observed at all concentrations, but a minimum CHSA value of 3.0 mg/mL was determined to obtain stability identical to that observed at serum-like HSA concentrations (35-50 mg/mL). Using a modified Lowry protocol, the quantity of firmly bound HSA in the protein corona (hard corona) was determined for all the CHSA used in the PBnp@HSA synthesis, finding increasing quantities with increasing CHSA. In particular, an HSA/PBnp number in the 1500-2300 range was found for CHSA 3.0-7.0 mg/mL, largely exceeding the 180 HSA/PBnp value calculated for an HSA monolayer on a PBnp. Finally, the stabilization brought by the HSA corona allowed us to carry out pH-spectrophotometric titrations on PBnp@HSA in the 3.5-9-0 pH range, revealing a pKa value of 6.68 for the water molecules bound to the Fe3+ centers on the PBnp surface, whose deprotonation is responsible for the blue-shift of the PBnp band from 706 nm (acidic solution) to 685 nm (basic solution).
RESUMO
Smart materials with controlled stimuli-responsive functions are at the forefront of technological development. In this work, we present a generic strategy that combines simple components, physicochemical responses, and easy fabrication methods to achieve a dual stimuli-responsive system capable of location-specific antimicrobial cargo delivery. The encapsulated system is fabricated by combining a biocompatible inert polymeric matrix of poly(dimethylsiloxane) (PDMS) and a bioactive cargo of saturated fatty acids. We demonstrate the effectiveness of our approach to deliver antimicrobial activity for the model bacteria Escherichia coli. The system responds to two control variables, temperature and pH, delivering two levels of antimicrobial response under distinct combinations of stimuli: one response toward the planktonic media and another response directly at the surface for sessile bacteria. Spatially resolved Raman spectroscopy alongside thermal and structural material analysis reveals that the system not only exhibits ON/OFF states but can also control relocation and targeting of the active cargo toward either the surface or the liquid media, leading to different ON/OFF states for the planktonic and sessile bacteria. The approach proposed herein is technologically simple and scalable, facing low regulatory barriers within the food and healthcare sectors by using approved components and relying on fundamental chemical processes. Our results also provide a proof-of-concept platform for the design and easy fabrication of delivery systems capable of operating as Boolean logic gates, delivering different responses under different environmental conditions.
Assuntos
Produtos Biológicos , Temperatura , Polímeros/química , Escherichia coli , Concentração de Íons de HidrogênioRESUMO
Prussian Blue (PB) is an inexpensive, biocompatible, photothermally active material. In this paper, self-assembled monolayers of PB nanoparticles were grafted on a glass surface, protected with a thin layer of silica and decorated with spherical silver nanoparticles. This combination of a photothermally active nanomaterial, PB, and an intrinsically antibacterial one, silver, leads to a versatile coating that can be used for medical devices and implants. The intrinsic antibacterial action of nanosilver, always active over time, can be enhanced on demand by switching on the photothermal effect of PB using near infrared (NIR) radiation, which has a good penetration depth through tissues and low side effects. Glass surfaces functionalized by this layer-by-layer approach have been characterized for their morphology and composition, and their intrinsic and photothermal antibacterial effect was studied against Gram+ and Gram- planktonic bacteria.
Assuntos
Nanopartículas Metálicas , Nanopartículas , Prata/farmacologia , Ferrocianetos/farmacologia , Antibacterianos/farmacologia , Materiais BiocompatíveisRESUMO
Prussian blue (PB) is a coordination polymer based on the Fe2+ CN Fe3+ sequence. It is an FDA-approved drug, intended for oral use at the acidic pH of the stomach and of most of the intestine track. However, based on FDA approval, a huge number of papers proposed the use of PB nanoparticles (PBnp) under "physiological conditions", meaning pH buffered at 7.4 and high saline concentration. While most of these papers report that PBnp are stable at this pH, a small number of papers describes instead PBnp degradation at the same or similar pH values, i.e. in the 7-8 range. Here we give a definitively clear picture: PBnp are intrinsically unstable at pH ≥ 7, degrading with the fast disappearance of their 700 nm absorption band, due to the formation of OH- complexes from the labile Fe3+ centers. However, we show also that the presence of a polymeric coating (PVP) can protect PBnp at pH 7.4 for over 24 h. Moreover, we demonstrate that when "physiological conditions" include serum, a protein corona is rapidly formed on PBnp, efficiently avoiding degradation. We also show that the viability of PBnp-treated EA.hy926, NCI-H1299, and A549 cells is not affected in a wide range of conditions that either prevent or promote PBnp degradation.
Assuntos
Nanopartículas , Nanopartículas/química , Ferrocianetos/química , Concentração de Íons de HidrogênioRESUMO
By replacing cetyltrimethylammonium bromide (CTAB) with the zwitterionic lauryl sulfobetaine (LSB) surfactant in the classical seed-growth synthesis, monocrystalline gold nanostars (m-NS) and pentatwinned gold asymmetric nanostars (a-NS) were obtained instead of nanorods. The main product under all synthetic conditions was a-NS, which have branches with high aspect ratios (AR), thus leading to LSPR absorptions in the 750-1150â nm range. The percentage of m-NS versus a-NS, the aspect ratio of the a-NS branches, and consequently the position of their LSPR absorption can be finely tuned simply by regulating the concentration of reductant, the concentration of surfactant, or the concentration of the "catalytic" Ag(+) cation. The m-NS have instead shorter and larger branches, the AR of which is poorly influenced by synthetic conditions and displays an LSPR positioned around 700â nm. A growth mechanism that involves the direct contact of the sulfate moiety of LSB on the surface of the nano-object is proposed, thereby implying preferential coating of the {111} Au faces with weak interactions. Consistent with this, we also observed the straightforward complete displacement of the LSB surfactant from the surface of the nanostars. This was obtained by the simple addition of thiols in aqueous solution to yield extremely stable coated a-NS and m-NS that are resistant to highly acidic, basic, and in similar to in vivo conditions.
RESUMO
With a simple optical method, based on UV-vis absorption spectra on glass slides, it is possible to predict the composition of self-assembled monolayers of mixed thiols, grafted on monolayers of silver nanoparticles. Glass slides are modified with the layer-by-layer technique, first forming a monolayer of mercaptopropyltrimethoxysilane, then grafting a monolayer of silver nanoparticles on it. These surfaces are further coated by single or mixed thiol monolayers, by dipping the slides in toluene solutions of the chosen thiols. Exchange constants are calculated for the competitive deposition between the colorless 1-dodecanethiol or PEG5000 thiol and BDP-SH, with the latter being a thiol-bearing molecule containing the strongly absorbing BODIPY (4,4-difluoro-4-bora-3a,4a-diaza-s-indacene) moiety, synthesized on purpose. The constants are calculated by determining the fraction of BDP-SH deposited on the surface from a solution with a given molar fraction, directly measuring the absorption spectra of BDP-SH on the slides. Then, the exchange constant for the competitive deposition between 1-dodecanethiol and PEG5000 thiol is calculated by combining their exchange constants with BDP-SH. This allows to predict the fraction of the two colorless thiols coating the silver nanoparticles slides obtained from a toluene solution with a given molar fraction, for example, of PEG5000 thiol. The correctness of the calculated surface fraction is verified by studying the coating competition between 1-dodecanethiol and a PEG5000 thiol remotely modified with a strongly absorbing fluorescein fragment.