Ultra-broadband detection of coherent infrared pulses by sum-frequency generation spectroscopy in reflection geometry.

We have newly developed, to the best of our knowledge, a detection method for broadband infrared pulses based on sum-frequency generation spectroscopy in reflection geometry, which can avoid a restriction of the detection bandwidth originating from the phase mismatch that is inevitable for the upconversion in transmission geometry. Using a GaAs crystal, we successfully demonstrated the ultra-broadband detection of the infrared pulses generated from a two-color laser-induced air plasma filament in a region from 300 to 3300 cm-1. With the advantage of ultra-short infrared pulses, the present detection method holds promise for application to time-resolved, ultra-broadband vibrational spectroscopy.

Two-Dimensional Interlayer Space Induced Horizontal Transformation of Metal-Organic Framework Nanosheets for Highly Permeable Nanofiltration Membranes.

Laminar membranes comprising graphene oxide (GO) and metal-organic framework (MOF) nanosheets benefit from the regular in-plane pores of MOF nanosheets and thus can support rapid water transport. However, the restacking and agglomeration of MOF nanosheets during typical vacuum filtration disturb the stacking of GO sheets, thus deteriorating the membrane selectivity. Therefore, to fabricate highly permeable MOF nanosheets/reduced GO (rGO) membranes, a two-step method is applied. First, using a facile solvothermal method, ZnO nanoparticles are introduced into the rGO laminate to stabilize and enlarge the interlayer spacing. Subsequently, the ZnO/rGO membrane is immersed in a solution of tetrakis(4-carboxyphenyl)porphyrin (H2 TCPP) to realize in situ transformation of ZnO into Zn-TCPP in the confined interlayer space of rGO. By optimizing the transformation time and mass loading of ZnO, the obtained Zn-TCPP/rGO laminar membrane exhibits preferential orientation of Zn-TCPP, which reduces the pathway tortuosity for small molecules. As a result, the composite membrane achieves a high water permeance of 19.0 L m-2  h-1  bar-1 and high anionic dye rejection (>99% for methyl blue).

Carbon Nitride Loaded with an Ultrafine, Monodisperse, Metallic Platinum-Cluster Cocatalyst for the Photocatalytic Hydrogen-Evolution Reaction.

For the realization of a next-generation energy society, further improvement in the activity of water-splitting photocatalysts is essential. Platinum (Pt) is predicted to be the most effective cocatalyst for hydrogen evolution from water. However, when the number of active sites is increased by decreasing the particle size, the Pt cocatalyst is easily oxidized and thereby loses its activity. In this study, a method to load ultrafine, monodisperse, metallic Pt nanoclusters (NCs) on graphitic carbon nitride is developed, which is a promising visible-light-driven photocatalyst. In this photocatalyst, a part of the surface of the Pt NCs is protected by sulfur atoms, preventing oxidation. Consequently, the hydrogen-evolution activity per loading weight of Pt cocatalyst is significantly improved, 53 times, compared with that of a Pt-cocatalyst loaded photocatalyst by the conventional method. The developed method is also effective to enhance the overall water-splitting activity of other advanced photocatalysts such as SrTiO3 and BaLa4 Ti4 O15 .

Hydrogen-induced Sulfur Vacancies on the MoS2 Basal Plane Studied by Ambient Pressure XPS and DFT Calculations.

Sulfur vacancy on an MoS2 basal plane plays a crucial role in device performance and catalytic activity; thus, an understanding of the electronic states of sulfur vacancies is still an important issue. We investigate the electronic states on an MoS2 basal plane by ambient-pressure X-ray photoelectron spectroscopy (AP-XPS) and density functional theory calculations while heating the system in hydrogen. The AP-XPS results show a decrease in the intensity ratio of S 2p to Mo 3d, indicating that sulfur vacancies are formed. Furthermore, low-energy components are observed in Mo 3d and S 2p spectra. To understand the changes in the electronic states induced by sulfur vacancy formation at the atomic scale, we calculate the core-level binding energies for the model vacancy surfaces. The calculated shifts for Mo 3d and S 2p with the formation of sulfur vacancy are consistent with the experimentally observed binding energy shifts. Mulliken charge analysis indicates that this is caused by an increase in the electronic density associated with the Mo and S atoms around the sulfur vacancy as compared to the pristine surface. The present investigation provides a guideline for sulfur vacancy engineering.

Photocatalytic Dinitrogen Fixation with Water on High-Phosphorus-Doped Carbon Nitride with Surface Nitrogen Vacancies.

Sunlight-driven photocatalytic dinitrogen (N2) fixation with water at ambient conditions is of vital importance for a sustainable energy society. The efficiency of this reaction, however, is still low because of the difficulty in promoting both water oxidation and N2 reduction reactions. Herein, we report that a high-phosphorus-doped carbon nitride with surface nitrogen vacancies (PCN(V)) synthesized by thermal condensation under a hydrogen (H2) atmosphere using phosphorus oxide (P2O5) as a phosphorus source efficiently promotes N2 fixation. The large numbers of the doped P atoms on the PCN(V)-P2O5 catalysts enhance the oxidation of water, while the N vacancies reduce N2, facilitating efficient ammonia (NH3) generation with an apparent quantum yield at 420 nm of 3.4%. Simulated sunlight illumination of the catalyst in water under N2 bubbling produces NH3 with a solar-to-chemical conversion efficiency of 0.16%, which is the highest efficiency among the previously reported powder photocatalysts.

Elucidation of the atomic-scale processes of dissociative adsorption and spillover of hydrogen on the single atom alloy catalyst Pd/Cu(111).

Hydrogen spillover is a crucial process in the selective hydrogenation reactions on Pd/Cu single atom alloy catalysts. In this study, we report the atomic-scale perspective of these processes on the single atom alloy catalyst Pd/Cu(111) based on the experimental and theoretical results, including infrared reflection absorption spectroscopy (IRAS), temperature programmed desorption (TPD), high-resolution X-ray photoelectron spectroscopy (HR-XPS), and density functional theory (DFT) calculations for core-level excitation. The hydrogen spillover onto Cu(111) was successfully observed in real time using time-resolved IRAS measurements at 80 K. The chemical shifts of Pd 3d5/2 indicate that H2 is dissociated and adsorbed at the Pd site. In addition, a "two-step" chemical shift of the Pd 3d5/2 binding energy was observed, indicating two types of hydrogen adsorption states at the Pd site. The proposed mechanism of the hydrogen dissociation and spillover processes is as follows: (i) a hydrogen molecule is dissociated at a Pd site, and the hydrogen atoms are adsorbed on the Pd site; (ii) the number of hydrogen atoms on the Pd site increases up to three; and (iii) the hydrogen atoms will spill over onto the Cu surface.

Polythiophene-Doped Resorcinol-Formaldehyde Resin Photocatalysts for Solar-to-Hydrogen Peroxide Energy Conversion.

The generation of hydrogen peroxide (H2O2) from water and dioxygen by sunlight-driven heterogeneous photocatalysis is a promising method for the artificial photosynthesis of a liquid solar fuel. We previously found that resorcinol-formaldehyde (RF) resin powders prepared by high-temperature hydrothermal synthesis act as highly active semiconductor photocatalysts for H2O2 generation. Herein, we report that RF resin powders doped with poly(3-hexylthiophene-2,5-diyl) (RF/P3HT) exhibit enhanced photocatalytic activities. The highly dispersed P3HT within the resin particles created charge transfer complexes with the conduction band of the resin via electron donation, facilitating efficient transfer of the photogenerated conduction band electrons through P3HT. This enhanced charge separation promoted efficient water oxidation and O2 reduction. The solar-to-chemical conversion efficiency for H2O2 generation on the RF/P3HT resin in water under simulated sunlight irradiation with atmospheric pressure of O2 was ∼1.0%, which is the highest efficiency reported for powder catalysts in artificial photosynthesis.

Preparation of Nanoscale Particles of Five Major Polymers as Potential Standards for the Study of Nanoplastics.

Nanoplastics are likely ubiquitous in the environment, and their potential toxic effects are a concern. However, quantitative information about the distribution of nanoplastics is still lacking, and toxicity tests are limited to a few select polymers because of the lack of appropriate standard materials, which should be nanoscale particles with standardizable morphologies, properties comparable to those of commercial polymers, and no impurities. Here, a precipitation-based method for preparing spherical nanoscale particles without the introduction of impurities is developed. The similarity of the molecular weight distributions, crystallinities, and thermal properties of five major polymers prepared using this method-low-density polyethylene, high-density polyethylene, polypropylene, polyvinyl chloride, and polystyrene-to those of commercial polymers indicate their potential for use as standard nanoplastic particles. This study provides a fundamental approach for the synthesis of standard nanoplastic particles that will facilitate quantification of the concentrations of nanoplastics in the environment and tests of their toxicity, which are required to assess the risks associated with exposure to them.

Photocatalytic Dinitrogen Fixation with Water on Bismuth Oxychloride in Chloride Solutions for Solar-to-Chemical Energy Conversion.

Ammonia is an indispensable chemical. Photocatalytic NH3 production via dinitrogen fixation using water by sunlight illumination under ambient conditions is a promising strategy, although previously reported catalysts show insufficient activity. Herein, we showed that ultraviolet light irradiation of a semiconductor, bismuth oxychloride with surface oxygen vacancies (BiOCl-OVs), in water containing chloride anions (Cl-) under N2 flow efficiently produces NH3. The surface OVs behave as the N2 reduction sites by the photoformed conduction band electrons. The valence band holes are consumed by self-oxidation of interlayer Cl- on the catalyst. The hypochloric acid (HClO) formed absorbs ultraviolet light and undergoes photodecomposition into O2 and Cl-. These consecutive photoreactions produce NH3 with water as the electron donor. The Cl- in solution compensates for the removed interlayer Cl- and inhibits catalyst deactivation. Simulated sunlight illumination of the catalyst in seawater stably generates NH3 with 0.05% solar-to-chemical conversion efficiency, thus exhibiting significant potential of the seawater system for artificial photosynthesis.

Resorcinol-formaldehyde resins as metal-free semiconductor photocatalysts for solar-to-hydrogen peroxide energy conversion.

Artificial photosynthesis is a critical challenge in moving towards a sustainable energy future. Photocatalytic generation of hydrogen peroxide from water and dioxygen (H2O + [Formula: see text]O2 → H2O2, ΔG° = 117 kJ mol-1) by sunlight is a promising strategy for artificial photosynthesis because H2O2 is a storable and transportable fuel that can be used directly for electricity generation. All previously reported powder photocatalysts, however, have suffered from low efficiency in H2O2 generation. Here we report that resorcinol-formaldehyde resins, widely used inexpensive polymers, act as efficient semiconductor photocatalysts to provide a new basis for H2O2 generation. Simple high-temperature hydrothermal synthesis (~523 K) produces low-bandgap resorcinol-formaldehyde resins comprising π-conjugated and π-stacked benzenoid-quinoid donor-acceptor resorcinol couples. The resins absorb broad-wavelength light up to 700 nm and catalyse water oxidation and O2 reduction by the photogenerated charges. Simulated sunlight irradiation of the resins stably generates H2O2 with more than 0.5% solar-to-chemical conversion efficiency. Therefore, this metal-free system shows significant potential as a new artificial photosynthesis system.

Linewidth Narrowing with Ultimate Confinement of an Alkali Multipole Plasmon by Modifying Surface Electronic Wave Functions with Two-Dimensional Materials.

This work demonstrates significant line narrowing of a surface multipole plasmon (MP) by modifying the surface electronic wave function with two-dimensional materials (2DMs): graphene and hexagonal boron nitride. This is found in an optical reflectivity of alkali atoms (Cs or K) on an Ir(111) surface covered with the 2DMs. The reduction in reflectivity induced by deposition of the alkali atoms becomes as large as 20% at ∼2 eV, which is ascribed to a MP of a composite of alkali/2DM/alkali/Ir multilayer structure. The linewidth of the MP band becomes as narrow as 0.2 eV by the presence of the 2DM between the two alkali layers. A numerical simulation by time-dependent density functional theory with a jellium model reveals that the density of states of the surface localized state is sharpened remarkably by the 2DMs that decouple the outermost alkali layer from the Ir bulk. Consequently, a local field enhancement of an order of 10^{5} is achieved by ultimate confinement of the MP within the outermost alkali layer. This work leads to a novel strategy for reducing plasmon dissipation in an atomically thin layer via atomic scale modification of surface structure.

Photocatalytic Dinitrogen Reduction with Water on Boron-Doped Carbon Nitride Loaded with Nickel Phosphide Particles.

Photocatalytic N2 reduction with water by sunlight irradiation is a challenging issue toward sustainable energy society, but previously reported photocatalysts had suffered from low stability and low activity. We prepared a boron-doped carbon nitride (BCN) semiconductor powder loaded with nickel phosphide particles (Ni2P) as cocatalysts. The Ni2P/BCN catalyst, when photoirradiated in pure water by simulated sunlight under N2 flow, successfully produces NH3 at room temperature. The B doping leads to a positive shift of the valence band level and enhances water oxidation by the photoformed holes. The Ni2P particles efficiently receive the conduction band electrons of BCN, leading to enhanced charge separation of the photoformed hole and electron pairs, and behave as N2 reduction sites. Simulated sunlight irradiation of the catalyst in water stably generates NH3 with 0.010% solar-to-chemical conversion efficiency. This noble-metal-free system therefore shows a significant potential for N2 photofixation.

Doping of Nb5+ Species at the Au-TiO2 Interface for Plasmonic Photocatalysis Enhancement.

Au nanoparticles loaded on semiconductor TiO2 absorb visible light due to their surface plasmon resonance (SPR) and inject the photogenerated hot electrons (ehot-) into the conduction band of TiO2. The separated charges promote oxidation and reduction reactions. The step that determines the rate of the plasmonic photocatalysis on the Au/TiO2 system is the ehot- injection through the Schottky barrier created at the Au-TiO2 interface. In the present work, niobium (Nb5+) oxide species were doped at the Au-TiO2 interface by loading Nb5+ onto the TiO2 surface followed by deposition of Au particles (2 wt % of TiO2). Visible light irradiation of the Au/Nb5+/TiO2 catalysts promotes aerobic oxidation of alcohols with much higher efficiency than that of undoped Au/TiO2. Lewis acidity of the Nb5+ species located at the interface cancels the negative charges of Au and creates a barrier with a narrower depletion layer, promoting tunneling ehot- injection. Efficiency of the ehot- injection depends on the amount of Nb5+ doped. Loading small amounts of Nb5+ (∼0.1 wt % of TiO2) creates mononuclear NbO4 species and shows large activity enhancement. In contrast, loading larger amounts of Nb5+ creates aggregated polynuclear Nb2O5 species. They decrease the electron density of Au particles and weaken their SPR absorption. This suppresses the ehot- generation on the Au particles and decreases the activity of plasmonic photocatalysis.

Specific Spatial Localization of Actin and DNA in a Water/Water Microdroplet: Self-Emergence of a Cell-Like Structure.

The effect of binary hydrophilic polymers on a pair of representative bio-macromolecules in a living cell has been examined. The results showed that these bio-macromolecules exhibited specific localization in cell-sized droplets that were spontaneously formed through water/water microphase segregation under crowding conditions with coexisting polymers. In these experiments, a simple binary polymer system with poly(ethylene glycol) (PEG) and dextran (DEX) was used. Under the conditions of microphase segregation, DNA was entrapped within cell-sized droplets rich in DEX. Similarly, F-actin, linearly polymerized actin, was entrapped specifically within microdroplets rich in DEX, whereas G-actin, a monomeric actin, was distributed evenly inside and outside these droplets. This study has been extended to a system with both F-actin and DNA, and it was found that DNA molecules were localized separately from aligned F-actin proteins to create microdomains inside microdroplets, reflecting the self-emergence of a cellular morphology similar to a stage of cell division.

Vapor-Phase Synthesis of ZIF-8 MOF Thick Film by Conversion of ZnO Nanorod Array.

ZIF-8 metal organic framework "micrometer-thick" films were constructed from ZnO precursor by a vapor-phase synthesis. The ZnO-to-ZIF-8 crystal transformation proceeded in the presence of 2-methylimidazole (Hmim) vapor. Continuous coatings of intergrown ZIF-8 crystals require control of a nucleation density. The dependence of ZnO crystal plane on the ZnO-to-ZIF-8 crystal transformation was investigated using four bulk ZnO single crystals: a-plane (11-20), c-plane (0001), m-plane (10-10), and r-plane (10-11). It was revealed that the m-plane (10-10) of ZnO is more effectively transformed into ZIF-8. In this work, highly oriented ZnO nanorod array film was used to provide the transport pathway of Hmim molecules and volume expansion space of ZnO-to-ZIF-8 crystal transformation for nucleation and crystal intergrowth. The high conversion of ZnO nanorod array into ZIF-8 in a short time could be achieved because (1) such mass transfer is easy due to the uniform internanorod distance being maintained during reaction and (2) the surface of the nanorod array is dominated by the highly reactive m-plane (10-10).

An Over 90 dB Intra-Scene Single-Exposure Dynamic Range CMOS Image Sensor Using a 3.0 µm Triple-Gain Pixel Fabricated in a Standard BSI Process.

To respond to the high demand for high dynamic range imaging suitable for moving objects with few artifacts, we have developed a single-exposure dynamic range image sensor by introducing a triple-gain pixel and a low noise dual-gain readout circuit. The developed 3 µm pixel is capable of having three conversion gains. Introducing a new split-pinned photodiode structure, linear full well reaches 40 ke-. Readout noise under the highest pixel gain condition is 1 e- with a low noise readout circuit. Merging two signals, one with high pixel gain and high analog gain, and the other with low pixel gain and low analog gain, a single exposure dynamic rage (SEHDR) signal is obtained. Using this technology, a 1/2.7", 2M-pixel CMOS image sensor has been developed and characterized. The image sensor also employs an on-chip linearization function, yielding a 16-bit linear signal at 60 fps, and an intra-scene dynamic range of higher than 90 dB was successfully demonstrated. This SEHDR approach inherently mitigates the artifacts from moving objects or time-varying light sources that can appear in the multiple exposure high dynamic range (MEHDR) approach.

Carbon Nitride-Aromatic Diimide-Graphene Nanohybrids: Metal-Free Photocatalysts for Solar-to-Hydrogen Peroxide Energy Conversion with 0.2% Efficiency.

Solar-to-chemical energy conversion is a challenging subject for renewable energy storage. In the past 40 years, overall water splitting into H2 and O2 by semiconductor photocatalysis has been studied extensively; however, they need noble metals and extreme care to avoid explosion of the mixed gases. Here we report that generating hydrogen peroxide (H2O2) from water and O2 by organic semiconductor photocatalysts could provide a new basis for clean energy storage without metal and explosion risk. We found that carbon nitride-aromatic diimide-graphene nanohybrids prepared by simple hydrothermal-calcination procedure produce H2O2 from pure water and O2 under visible light (λ > 420 nm). Photoexcitation of the semiconducting carbon nitride-aromatic diimide moiety transfers their conduction band electrons to graphene and enhances charge separation. The valence band holes on the semiconducting moiety oxidize water, while the electrons on the graphene moiety promote selective two-electron reduction of O2. This metal-free system produces H2O2 with solar-to-chemical energy conversion efficiency 0.20%, comparable to the highest levels achieved by powdered water-splitting photocatalysts.

Hot-Electron-Induced Highly Efficient O2 Activation by Pt Nanoparticles Supported on Ta2O5 Driven by Visible Light.

Aerobic oxidation on a heterogeneous catalyst driven by visible light (λ >400 nm) at ambient temperature is a very important reaction for green organic synthesis. A metal particles/semiconductor system, driven by charge separation via an injection of "hot electrons (e(hot)(-))" from photoactivated metal particles to semiconductor, is one of the promising systems. These systems, however, suffer from low quantum yields for the reaction (<5% at 550 nm) because the Schottky barrier created at the metal/semiconductor interface suppresses the e(hot)(-) injection. Some metal particle systems promote aerobic oxidation via a non-e(hot)(-)-injection mechanism, but require high reaction temperatures (>373 K). Here we report that Pt nanoparticles (∼5 nm diameter), when supported on semiconductor Ta2O5, promote the reaction without e(hot)(-) injection at room temperature with significantly high quantum yields (∼25%). Strong Pt-Ta2O5 interaction increases the electron density of the Pt particles and enhances interband transition of Pt electrons by absorbing visible light. A large number of photogenerated e(hot)(-) directly activate O2 on the Pt surface and produce active oxygen species, thus promoting highly efficient aerobic oxidation at room temperature.

Sunlight-driven hydrogen peroxide production from water and molecular oxygen by metal-free photocatalysts.

Design of green, safe, and sustainable process for the synthesis of hydrogen peroxide (H2 O2 ) is a very important subject. Early reported processes, however, require hydrogen (H2 ) and palladium-based catalysts. Herein we propose a photocatalytic process for H2 O2 synthesis driven by metal-free catalysts with earth-abundant water and molecular oxygen (O2 ) as resources under sunlight irradiation (λ>400 nm). We use graphitic carbon nitride (g-C3 N4 ) containing electron-deficient aromatic diimide units as catalysts. Incorporating the diimide units positively shifts the valence-band potential of the catalysts, while maintaining sufficient conduction-band potential for O2 reduction. Visible light irradiation of the catalysts in pure water with O2 successfully produces H2 O2 by oxidation of water by the photoformed valence-band holes and selective two-electron reduction of O2 by the conduction band electrons.

Building respirable powder architectures: utilizing polysaccharides for precise control of particle morphology for enhanced pulmonary drug delivery.

INTRODUCTION: Dry powder inhaler (DPI) formulations are gaining attention as universal formulations with applications in a diverse range of drug formulations. The practical application of DPIs to pulmonary drugs requires enhancing their delivery efficiency to the target sites for various treatment modalities. Previous reviews have not explored the relation between particle morphology and delivery to different pulmonary regions. This review introduces new approaches to improve targeted DPI delivery using novel particle design such as supraparticles and metal-organic frameworks based on cyclodextrin. AREAS COVERED: This review focuses on the design of DPI formulations using polysaccharides, promising excipients not yet approved by regulatory agencies. These excipients can be used to design various particle morphologies by controlling their physicochemical properties and manufacturing methods. EXPERT OPINION: Challenges associated with DPI formulations include poor access to the lungs and low delivery efficiency to target sites in the lung. The restricted applicability of typical excipients contributes to their limited use. However, new formulations based on polysaccharides are expected to establish a technological foundation for the development of DPIs capable of delivering modalities specific to different lung target sites, thereby enhancing drug delivery.