RESUMO
Plastic waste is an outstanding environmental thread. Poly(ethylene terephthalate) (PET) is one of the most abundantly produced single-use plastics worldwide, but its recycling rates are low. In parallel, additive manufacturing is a rapidly evolving technology with wide-ranging applications. Thus, there is a need for a broad spectrum of polymers to meet the demands of this growing industry and address post-use waste materials. This perspective article highlights the potential of designing microbial cell factories to upcycle PET into functionalized chemical building blocks for additive manufacturing. We present the leveraging of PET hydrolyzing enzymes and rewiring the bacterial C2 and aromatic catabolic pathways to obtain high-value chemicals and polymers. Since PET mechanical recycling back to original materials is cost-prohibitive, the biochemical technology is a viable alternative to upcycle PET into novel 3D printing materials, such as replacements for acrylonitrile butadiene styrene. The presented hybrid chemo-bio approaches potentially enable the manufacturing of environmentally friendly degradable or higher-value high-performance polymers and composites and their reuse for a circular economy. ONE-SENTENCE SUMMARY: Biotransformation of waste PET to high-value platform chemicals for additive manufacturing.
Assuntos
Polímeros , Estireno , Polietilenotereftalatos , Bactérias , Reciclagem , Biotransformação , PlásticosRESUMO
Quasi-fractal gold nanoparticles can be synthesized via a modified and temperature controlled procedure initially used for the synthesis of star-like gold nanoparticles. The surface features of nanoparticles lead to improved enhancement of Raman scattering intensity of analyte molecules due to the increased number of sharp surface features possessing numerous localized surface plasmon resonances (LSPR). The LSPR is affected by the size and shape of surface features as well as inter-nanoparticle interactions, as these affect the oscillation modes of electrons on the nanoparticle surfaces. The effect of the particle morphologies on the localized surface plasmon resonance (LSPR) and on the surface-enhancing capabilities of these nanoparticles is explored by comparing different nanoparticle morphologies and concentrations. We show that in a fixed nanoparticle concentration regime, quasi-fractal gold nanoparticles (gold nanocaltrop) provide the highest level of surface enhancement, whereas spherical nanoparticles provide the largest enhancement in a fixed gold concentration regime. The presence of highly branched features enables these nanoparticles to couple with a laser wavelength, despite having no strong absorption band and hence no single surface plasmon resonance. This cumulative LSPR may allow these nanoparticles to be used in a variety of applications in which laser wavelength flexibility is beneficial, such as in medical imaging applications where fluorescence at short laser wavelengths may be coupled with non-fluorescing long laser wavelengths for molecular sensing.
RESUMO
The synthesis of star-like gold nanoparticles (SGNs) in a temperature-controlled environment allows for temperature modulation and facilitates the growth of highly branched nanoparticles. By increasing the synthesis temperature, the level of branching increases as well. These highly branched features represent a distinctly novel, quasi-fractal nanoparticle morphology, referred to herein as gold nano caltrops (GNC). The increased surface roughness, local curvature and degree of inhomogeneity of GNC lend themselves to generating improved enhancement of the scattering signals in surface-enhanced Raman spectroscopy (SERS) via a mechanism in which the localized surface plasmon sites, or "hot spots," provide the engine for the signal amplification, rather than the more conventional surface plasmon. Here, the synthesis procedure and the surface-enhancing capabilities of GNC are described and discussed.
Assuntos
Ouro , Nanopartículas Metálicas , Fractais , Análise Espectral RamanRESUMO
The influence of pore size, relative block size, and solvent quality on the extent of diblock copolymer adsorption on alumina surfaces was determined. To this end, the block copolymer that was chosen was poly(styrene)-b-poly(methyl methacrylate) (PS-b-PMMA), in which the PMMA block strongly chemisorbs to the surface and the PS block weakly physisorbs. Several architectures (i.e., different ratios of M(n(PMMA)) and M(n)((PS))) of the PS-b-PMMA copolymers were adsorbed from various solvents onto porous alumina membranes with various pore sizes. It was determined that the diblock copolymer coverage decreased significantly as the pore size decreased, similar to the behavior of the PMMA homopolymer under the same conditions. However, the coverage decreased as the molecular weight of the anchoring block (PMMA) increased for all pore sizes, which is in contrast to the behavior of the PMMA homopolymer under the same conditions. The dependence of the coverage on the relative block size and solvent quality is analyzed on the basis of the anchor-buoy model and the deviation from it in a nonideal system. The results presented in this work are relevant to the study of block copolymer conformation in solutions and on surfaces, adsorption chromatography, and solvent sensors and controls.
Assuntos
Óxido de Alumínio/química , Polimetil Metacrilato/química , Poliestirenos/química , Adsorção , Estrutura Molecular , Propriedades de SuperfícieRESUMO
Micrometer- and submicrometer-scale surface roughness enhances osteoblast differentiation on titanium (Ti) substrates and increases bone-to-implant contact in vivo. However, the low surface wettability induced by surface roughness can retard initial interactions with the physiological environment. We examined chemical modifications of Ti surfaces [pretreated (PT), R(a) ≤ 0.3 µm; sand blasted/acid etched (SLA), R(a) ≥ 3.0 µm] in order to modify surface hydrophilicity. We designed coating layers of polyelectrolytes that did not alter the surface microstructure but increased surface ionic character, including chitosan (CHI), poly(L-glutamic acid) (PGA), and poly(L-lysine) (PLL). Ti disks were cleaned and sterilized. Surface chemical composition, roughness, wettability, and morphology of surfaces before and after polyelectrolyte coating were examined by X-ray photoelectron spectroscopy (XPS), contact mode profilometry, contact angle measurement, and scanning electron microscopy (SEM). High-resolution XPS spectra data validated the formation of polyelectrolyte layers on top of the Ti surface. The surface coverage of the polyelectrolyte adsorbed on Ti surfaces was evaluated with the pertinent SEM images and XPS peak intensity as a function of polyelectrolyte adsorption time on the Ti surface. PLL was coated in a uniform thin layer on the PT surface. CHI and PGA were coated evenly on PT, albeit in an incomplete monolayer. CHI, PGA, and PLL were coated on the SLA surface with complete coverage. The selected polyelectrolytes enhanced surface wettability without modifying surface roughness. These chemically modified surfaces on implant devices can contribute to the enhancement of osteoblast differentiation.
Assuntos
Eletrólitos/química , Microtecnologia/métodos , Polímeros/química , Próteses e Implantes , Titânio/química , Molhabilidade , Concentração de Íons de HidrogênioRESUMO
Maghemite (γ-Fe(2)O(3))/multi-walled carbon nanotubes (MWCNTs) hybrid-materials were synthesized and their anisotropic electrical conductivities as a result of their alignment in a polymer matrix under an external magnetic field were investigated. The tethering of γ-Fe(2)O(3) nanoparticles on the surface of MWCNT was achieved by a modified sol-gel reaction, where sodium dodecylbenzene sulfonate (NaDDBS) was used in order to inhibit the formation of a 3D iron oxide gel. These hybrid-materials, specifically, magnetized multi-walled carbon nanotubes (m-MWCNTs) were readily aligned parallel to the direction of a magnetic field even when using a relatively weak magnetic field. The conductivity of the epoxy composites formed in this manner increased with increasing m-MWCNT mass fraction in the polymer matrix. Furthermore, the conductivities parallel to the direction of magnetic field were higher than those in the perpendicular direction, indicating that the alignment of the m-MWCNT contributed to the enhancement of the anisotropic electrical properties of the composites in the direction of alignment.
RESUMO
The scope of the work undertaken in this paper was to explore the feasibility and reliability of using the Raman signature of aromatic amino acids as a marker in the detection of the presence of breast cancer and perhaps, even the prediction of cancer development in very early stages of cancer onset. To be able to assess this hypothesis, we collected most recent and relevant literature in which Raman spectroscopy was used as an analytical tool in the evaluation of breast cell lines and breast tissue, re-analyzed all the Raman spectra, and extracted all spectral bands from each spectrum that were indicative of aromatic amino acids. The criteria for the consideration of the various papers for this study, and hence, the inclusion of the data that they contained were two-fold: (1) The papers had to focus on the characterization of breast tissue with Raman spectroscopy, and (2) the spectra provided within these papers included the spectral range of 500-1200 cm-1, which constitutes the characteristic region for aromatic amino acid vibrational modes. After all the papers that satisfied these criteria were collected, the relevant spectra from each paper were extracted, processed, normalized. All data were then plotted without bias in order to decide whether there is a pattern that can shed light on a possible diagnostic classification. Remarkably, we have been able to demonstrate that cancerous breast tissues and cells decidedly exhibit overexpression of aromatic amino acids and that the difference between the extent of their presence in cancerous cells and healthy cells is overwhelming. On the basis of this analysis, we conclude that it is possible to use the signature Raman bands of aromatic amino acids as a biomarker for the detection, evaluation and diagnosis of breast cancer.
Assuntos
Aminoácidos Aromáticos/análise , Biomarcadores Tumorais/análise , Neoplasias da Mama/diagnóstico , Análise Espectral Raman , Linhagem Celular Tumoral , Feminino , Humanos , Análise de Componente PrincipalRESUMO
Copper (Cu) has been extensively used as an interconnect material for microelectronic devices because of its high electrical and thermal conductivity and excellent electromigration resistance. However, the formation of relatively rough Cu surfaces ( approximately 5 nm roughness) and Cu-oxide layers upon exposure to air still hinders their reliable application in a wide range of fields. In this article, we show the potential values of highly stable and ultrasmooth polycrystalline bare Cu obtained by simple annealing and chemical modification for a wide range of Cu-based electronic devices. The morphological properties and oxidation behavior of annealed Cu surfaces, before and after coating by self-assembled monolayers of terephthalic acid (TPA), were examined upon exposure to ambient air conditions ( approximately 110 days). Thin films of polycrystalline Cu, deposited on top of an adhesion layer of tantalum nitride (TaN) and annealed for 8 h at 580 degrees C under 2 x 10(-7) Torr, provided ultrasmooth Cu surfaces (R(rms) = 0.15-1.1 nm for fresh samples) and had a stable Cu-oxide layer after 65 days ( approximately 3.5 nm). These observations were perceived to be superior to nonannealed polycrystalline Cu samples. Coating fresh (oxide-free) samples of ultrasmooth Cu with TPA molecules created a closely packed monolayer with a standing-up phase configuration and molecular coverage of approximately 90%. The TPA-coated Cu surface has not shown any detectable oxidation during the first 2 weeks of exposure. The protection efficiency of this layer was found to be superior to those reported earlier on polycrystalline Cu surfaces. The oxidation mechanisms of both annealed and nonannealed Cu surfaces are presented and discussed.
RESUMO
The flow behavior of nanostructure clusters, consisting of chemically bonded PbSe quantum dots and magnetic gamma-Fe(2)O(3) nanoparticles, has been investigated. The clusters are regarded as model nanoplatforms with multiple functionalities, where the gamma-Fe(2)O(3) magnets serve as transport vehicles, manipulated by an external magnetic field gradient, and the quantum dots act as fluorescence tags within an optical window in the near-infrared regime. The clusters' flow was characterized by visualizing their trajectories within a viscous fluid (mimicking a blood stream), using an optical imaging method, while the trajectory pictures were analyzed by a specially developed processing package. The trajectories were examined under various flow rates, viscosities and applied magnetic field strengths. The results revealed a control of the trajectories even at low magnetic fields (<1 T), validating the use of similar nanoplatforms as active targeting constituents in personalized medicine.
Assuntos
Compostos Férricos/química , Chumbo/química , Nanopartículas/química , Nanotecnologia/métodos , Compostos de Selênio/química , Algoritmos , Sistemas de Liberação de Medicamentos , Campos Eletromagnéticos , Microfluídica/métodos , Microscopia Eletrônica de Transmissão , Pontos Quânticos , Interface Usuário-Computador , ViscosidadeRESUMO
An investigation of the optical and magnetic properties of a unique hydrogen-linked conjugate nanostructure, comprised of superparamagnetic gamma-Fe(2)O(3) nanoparticles (NPs) and near-infrared PbSe nanocrystal quantum dot (NQD) chromophores, is reported. The results show retention of the NQDs' emission quantum efficiency and radiative lifetime, and only a small red shift of its band energy, upon conjugation to the dielectric surroundings of gamma-Fe(2)O(3) NPs. The study also shows the sustainability of the superparamagnetism of the NPs after conjugation, with only a slight decrease of the ferromagnetic-superparamagnetic transition temperature with respect to that of the individual NPs. Thus, the conjugate nanostructure can be considered as a useful medical platform when PbSe NQDs act as fluorescent tags, while the gamma-Fe(2)O(3) NPs are used as a vehicle driven by an external magnetic field for targeted delivery of tags or drugs.
RESUMO
The use of surface-enhanced Raman spectroscopy (SERS) to delineate between the breast epithelial cell lines MCF10A, SK-BR-3, and MDA-MB-231 is explored utilizing varied morphologies of gold nanoparticles. The nanoparticles studied had spherical, star-like, and quasi-fractal (nanocaltrop) morphologies and possessed varying degrees of surface inhomogeneity and complexity. The efficacy of Raman enhancement of these nanoparticles was a function of their size, their surface morphology, and the associated density of "hot spots," as well as their cellular uptake. The spherical and star-like nanoparticles provided strong signal enhancement that allowed for the discernment among the three cell phenotypes based solely on the acquired Raman spectra. The presence of overlapping Raman band spectral regions, as well as unique spectral bands, suggests that the underlying biological differences between these cells can be accessed without the need for tagging the nanoparticles or for specific cell targeting, demonstrating the potential ubiquity of this technique in imaging any cancer. This work provides clear evidence for the potential application of SERS as a tool for mapping cancerous lesions, possibly during surgery and under histopathological analysis.
RESUMO
Using a specially designed apparatus, which collects simultaneous temperature and X-ray scattering data, we performed in situ measurements of the filament during MatEx 3D printing. The data show that the MatEx 3D printing extrusion process provides sufficient shear to form shish-kebab structures, which initially nucleate at the filament surface and spread into the filament core. Time-resolved measurements show that the kebab component near the surface relaxes after deposition of the second filament and enhances chain diffusion across the interface. SEM images indicate near complete interfacial merging of the filaments, which results in excellent mechanical properties.
RESUMO
In this paper, we have developed a geometric-based scaling model that describes the adsorption of diblock copolymer chains from good solvents and theta-solvents onto reactive surfaces of varying curvatures. To evaluate the impact of particle size on the adsorption process, we probed the adsorption of poly(styrene-b-methymethacrylate) (PS-PMMA) diblock copolymers from solvents with different degrees of selectivity on aluminum oxide (Al(2)O(3)) surfaces belonging to particles of different sizes. When the adsorbed PMMA layer is dense enough (in the case of a theta-solvent for the PMMA block), our results show good correlation between the theory and experimental results, pointing to the formation of a PMMA adsorption layer and a brushlike PS layer. Conversely, when adsorption occurs from a nonpreferential solvent, particularly on particles with high curvature, the PMMA adsorption layer at the surface becomes less dense and the grafted PS moiety exhibits a transitional morphology consisting of several layers of increasingly sparsely spaced blobs.
Assuntos
Metacrilatos/química , Modelos Químicos , Poliestirenos/química , Solventes/química , Adsorção , Óxido de Alumínio/química , Peso Molecular , Tamanho da Partícula , Polimetil Metacrilato/química , Solubilidade , Espectroscopia de Infravermelho com Transformada de Fourier , Propriedades de SuperfícieRESUMO
Poly-[Rh(1,4-phenylene diisocyanide)+4/2(Cl)-] has a two-dimensional template structure, where Rh atoms are bonded by the -conjugated 1,4-phenylene diisocyanide (pdi) ligands in the x-y plane and through overlapping dz orbitals in the z direction. The more conductive metallic bonds in the z direction create anisotropy in the electrical conductivity. The anisotropy and unique geometry of poly-[Rh(pdi)+4/2(Cl)-] make it a useful test bed for examining the relationship between electrical properties and chemical stability in metal-isocyanide molecular wire systems. The bulk powder of poly-[Rh(pdi)+4/2(Cl)-] is estimated to have a room-temperature bulk conductivity of 3.4 x 10(-11) S x cm(-1), an electrical activation energy of 0.9 eV, and a dielectric constant of 7.5. In this paper, impedance spectroscopy and X-ray powder diffraction were used to show the dependence of the electrical conductivity on the metal-metal bonding of pressed bulk powders of poly-[Rh(pdi)+4/2(Cl)-]. Thermo-gravimetric analysis and X-ray photoelectron spectroscopy were used to demonstrate air sensitivity in the polymer and elucidate the mechanism of oxidative degradation.
RESUMO
We have developed a novel multicomponent nano-hydroxyapatite-poly(D,L-lactide-co-glycolide)-collagen biomaterial (nHAP-PLGA-collagen) with mechanical properties similar to human cancellous bone. To demonstrate the bone forming capacity of nHAP-PLGA-collagen prior to in vivo experiments, nHAP-PLGA-collagen films and 3D porous scaffolds were seeded with human mesenchymal stem cells (hMSCs) to characterize cell proliferation and osteogenic differentiation. Over 21 days hMSCs seeded on 2D nHAP-PLGA-collagen films proliferate, form nodules, deposit mineral and express high alkaline phosphatase activity (ALP) indicating commitment of hMSCs towards osteogenic lineage. When seeded in 3D scaffolds, hMSCs migrate throughout the connected porous network of the nHAP-PLGA-collagen scaffold and proliferate to fill the scaffold voids. Over 35 days, cells express ALP, osteocalcin and deposit minerals with kinetics similar to osteogenesis in vivo. Adipogenic or chondrogenic differentiation is not detected in 3D constructs, indicating that in an osteogenic environment the presence of bone ECM specific molecules in nHAP-PLGA-collagen scaffolds support homogeneous bone tissue development. This ability of nHAP-PLGA-collagen matrices to provide biochemical stimulation to support osteogenesis from stem cells along with its high mechanical strength suggests that nHAP-PLGA-collagen is a suitable biomaterial for bone regeneration. This platform technology of covalently attaching ECM proteins and molecules with synthetic and natural polymers to adjust material properties and biochemical signaling has a potential for a wider range of applications in tissue engineering and regenerative medicine.
Assuntos
Colágeno/química , Durapatita/química , Ácido Láctico/química , Células-Tronco Mesenquimais/citologia , Osteogênese , Ácido Poliglicólico/química , Alicerces Teciduais/química , Regeneração Óssea , Substitutos Ósseos/química , Linhagem Celular , Proliferação de Células , Humanos , Transplante de Células-Tronco Mesenquimais , Copolímero de Ácido Poliláctico e Ácido Poliglicólico , Porosidade , Engenharia TecidualRESUMO
The present paper presents a facile and low-cost hydrothermal method to synthesize stoichiometric FeNi3 alloy nanoparticles by reducing Ni(NO3)2.6H(2)O and Fe(NO3)2.9H(2)O with hydrazine hydrate in strong alkaline media. X-ray diffraction patterns of as-prepared samples synthesized at 180 degrees C for different hydrothermal reaction times reveal that the products are pure stoichiometric FeNi3 alloyed nanoparticles with well-defined crystalline cubic structure when the hydrothermal time is above 2 h, while no crystal phases are detected in the product obtained under ambient pressure in an open system from the same starting prescription. Transmission electron microscopic images show that the size of the as-prepared nanoparticles increases with prolongation of the hydrothermal reaction time. The as-prepared sample has the symmetric hysteresis loop behavior of ferromagnetic materials.
RESUMO
Fourier transform infrared spectroscopy (FTIR) was used as a novel characterization method to determine the properties of the interface that developed when cobalt oxide nanoparticles were self-assembled in a poly(methyl methacrylate) (PMMA) matrix. The method employed the distinct changes that were observed in the infrared spectra of the polymer upon adsorption onto the cobalt oxide nanoparticles, allowing a quantitative determination of the average number of contact points that the average polymer chain formed with the surface of a cobalt oxide nanoparticle of average size. The results obtained with this method compared favorably to those obtained by the coupling of transmission electron microscopy (TEM) experiments with thermogravimetric analysis (TGA). On the basis of both methods, we concluded that the interfacial region created between the cobalt oxide nanoparticles and PMMA is extremely sensitive to the chain length, i.e., the number of anchor points and the density of the polymer layer increase with chain molecular weight. At molecular weights of approximately 250,000, the density of the polymer layer saturates at a value that correspond to that of very thin PMMA films.
RESUMO
A bone graft is a complicated structure that provides mechanical support and biological signals that regulate bone growth, reconstruction, and repair. A single-component material is inadequate to provide a suitable combination of structural support and biological stimuli to promote bone regeneration. Multicomponent composite biomaterials lack adequate bonding among the components to prevent phase separation after implantation. We have previously developed a novel multistep polymerization and fabrication process to construct a nano-hydroxyapatite-poly(D,L-lactide-co-glycolide)-collagen biomaterial (abbreviated nHAP-PLGA-collagen) with the components covalently bonded to each other. In the present study, the mechanical properties and osteogenic potential of nHAP-PLGA-collagen are characterized to assess the material's suitability to support bone regeneration. nHAP-PLGA-collagen films exhibit tensile strength very close to that of human cancellous bone. Human mesenchymal stem cells (hMSCs) are viable on 2D nHAP-PLGA-collagen films with a sevenfold increase in cell population after 7 days of culture. Over 5 weeks of culture, hMSCs deposit matrix and mineral consistent with osteogenic differentiation and bone formation. As a result of matrix deposition, nHAP-PLGA-collagen films cultured with hMSCs exhibit 48% higher tensile strength and fivefold higher moduli compared to nHAP-PLGA-collagen films without cells. More interestingly, secretion of matrix and minerals by differentiated hMSCs cultured on the nHAP-PLGA-collagen films for 5 weeks mitigates the loss of mechanical strength that accompanies PLGA hydrolysis.
Assuntos
Materiais Biocompatíveis/química , Regeneração Óssea/fisiologia , Colágeno/química , Durapatita/química , Ácido Láctico/química , Osteogênese , Ácido Poliglicólico/química , Osso e Ossos , Adesão Celular , Diferenciação Celular , Sobrevivência Celular , Humanos , Fenômenos Mecânicos , Células-Tronco Mesenquimais/citologia , Copolímero de Ácido Poliláctico e Ácido Poliglicólico , Engenharia Tecidual , Alicerces Teciduais/químicaRESUMO
In this study, we quantified the adsorption of immunoglobulin G (IgG) protein onto several polyelectrolyte-modified sintered porous polyethylene (PPE) membranes. The polymer surfaces had both cationic and anionic charges obtained via the adsorption of polyethylenimine (PEI) and polyacrylic acid (PAA), respectively, onto plasma-activated PPE. The amount of IgG adsorption was determined by measuring the gamma radiation emitted by [125I]-IgG radio labeled protein. By studying the impact of pH and ionic strength on IgG adsorption, we attempted to characterize the role and nature of the electrostatic interactions involved in the adsorption process to better understand how these interactions were influenced by the charge and structure of immobilized polyelectrolyte complexes at modified membrane surfaces. We were able to show that surface modification of PPE membranes with adsorbed PEI monolayers and PEI-PAA bilayers can greatly improve the IgG binding ability of the membrane under optimized conditions. We also showed that the observed improvement in the IgG binding is derived from electrostatic interactions between IgG and the polyelectrolyte surface. In addition, we found that the greatest IgG adsorption occurred when the IgG and the surface possessed predominantly opposite charges, rather than when the surface possessed the greatest electrostatic charge. Finally, we have found that the molecular weight of the terminating polyelectrolyte has a noticeable effect upon the electrostatic interactions between IgG and the PEI-PAA bilayer-modified PPE surfaces.