Polyesters by a Radical Pathway: Rationalization of the Cyclic Ketene Acetal Efficiency.

Radical ring-opening polymerization (rROP) of cyclic ketene acetals (CKAs) combines the advantages of both ring-opening polymerization and radical polymerization thereby allowing the robust production of polyesters coupled with the mild polymerization conditions of a radical process. rROP was recently rejuvenated by the possibility to copolymerize CKAs with classic vinyl monomers leading to the insertion of cleavable functionality into a vinyl-based copolymer backbone and thus imparting (bio)degradability. Such materials are suitable for a large scope of applications, particularly within the biomedical field. The competition between the ring-opening and ring-retaining propagation routes is a major complication in the development of efficient CKA monomers, ultimately leading to the use of only four monomers that are known to completely ring-open under all experimental conditions. In this article we investigate the radical ring-opening polymerization of model CKA monomers and demonstrate by the combination of DFT calculations and kinetic modeling using PREDICI software that we are now able to predict in silico the ring-opening ability of CKA monomers.

Radical Ring-Opening Polymerization: Scope, Limitations, and Application to (Bio)Degradable Materials.

Cyclic monomers bearing either vinyl or exomethylene groups have the ability to be polymerized through a radical pathway via a ring-opening mechanism (addition-fragmentation process), leading to the introduction of functionalities in the polymer backbone. Radical ring-opening polymerization (rROP) combines the advantages of both ring-opening polymerization and radical polymerization, that is the preparation of polymers bearing heteroatoms in the backbone but with the ease and robustness of a radical process. This current review presents a comprehensive description of rROP by detailing: (i) the various monomers that polymerize through rROP; (ii) the main parameters that govern the rROP mechanism; (iii) the copolymerization by conventional or controlled/living radical polymerization between rROP monomers and traditional vinyl monomers to obtain copolymers with advanced properties; (iv) the different applications (low shrinkage materials and preparation of (bio)degradable materials) of rROP monomer-containing materials, and (v) the main alternatives to rROP to induce degradability to materials obtained by a radical polymerization.

Radical Copolymerization of Vinyl Ethers and Cyclic Ketene Acetals as a Versatile Platform to Design Functional Polyesters.

Free-radical copolymerization of cyclic ketene acetals (CKAs) and vinyl ethers (VEs) was investigated as an efficient yet simple approach for the preparation of functional aliphatic polyesters. The copolymerization of CKA and VE was first predicted to be quasi-ideal by DFT calculations. The theoretical prediction was experimentally confirmed by the copolymerization of 2-methylene-1,3-dioxepane (MDO) and butyl vinyl ether (BVE), leading to rMDO =0.73 and rBVE =1.61. We then illustrated the versatility of this approach by preparing different functional polyesters: 1) copolymers functionalized by fluorescent probes; 2) amphiphilic copolymers grafted with poly(ethylene glycol) (PEG) side chains able to self-assemble into PEGylated nanoparticles; 3) antibacterial films active against Gram-positive and Gram-negative bacteria (including a multiresistant strain); and 4) cross-linked bioelastomers with suitable properties for tissue engineering applications.

Elucidation of a side reaction occurring during nitroxide-mediated polymerization of cyclic ketene acetals by tandem mass spectrometric end-group analysis of aliphatic polyesters.

RATIONALE: In order to prevent side reactions while developing new polymerization processes, their mechanism has to be understood and one first key insight is the structure of the end-groups in polymeric by-products. The synthetic method scrutinized here is the nitroxide-mediated polymerization (NMP) of a cyclic ketene acetal, a promising alternative process to the production of polyesters. METHODS: Polymer end-group characterization was performed by mass spectrometry (MS), combining elemental composition information derived from accurate mass data in the MS mode with fragmentation features recorded in the MS/MS mode. Electrospray was used as the ionization method to ensure the integrity of original chain terminations and a quadrupole time-of-flight (QTOF) instrument was employed for high-resolution mass measurements in both MS and tandem mass spectrometry (MS/MS) modes. RESULTS: Occurrence of side reactions in the studied polymerization method, first evidenced by an unusual increase in dispersity with conversion, was confirmed in MS with the detection of two polymeric impurities in addition to the expected species. Fragmentation rules were first established for this new polyester family in order to derive useful structural information from MS/MS data. In addition to a usual NMP by-product, the initiating group of the second polymeric impurities revealed the degradation of the nitroxide moiety. CONCLUSIONS: Unambiguous MS/MS identification of end-groups in by-products sampled from the polymerization medium allowed an unusual side reaction to be identified during the NMP preparation of polyesters. On-going optimization of the polymerization method aims at preventing this undesired process.

Nitroxide-mediated radical ring-opening copolymerization: chain-end investigation and block copolymer synthesis.

Well-defined, degradable copolymers are successfully prepared by nitroxide-mediated radical ring opening polymerization (NMrROP) of oligo(ethylene glycol) methyl ether methacrylate (OEGMA) or methyl methacrylate (MMA), a small amount of acrylonitrile (AN) and cyclic ketene acetals (CKAs) of different structures. Phosphorous nuclear magnetic resonance allows in-depth chain-end characterization and gives crucial insights into the nature of the copoly-mer terminal sequences and the living chain fractions. By using a small library of P(OEGMA-co-AN-co-CKA) and P(MMA-co-AN-co-CKA) as macroinitiators, chain extensions with styrene are performed to furnish (amphiphilic) block copolymers comprising a degradable segment.

Degradable and comb-like PEG-based copolymers by nitroxide-mediated radical ring-opening polymerization.

Three cyclic ketene acetals, 2-methylene-1,3-dioxepane (MDO), 5,6-benzo-2-methylene-1,3-dioxepane (BMDO), and 2-methylene-4-phenyl-1,3-dioxolane (MPDL), have been copolymerized with oligo(ethylene glycol) methyl ether methacrylate and a small amount of acrylonitrile (or styrene) at 90 °C by nitroxidemediated radical ring-opening polymerization, as a convenient way to prepare degradable PEG-based copolymers for biomedical applications. MPDL was the best candidate, enabling high monomer conversions to be reached and well-defined PEG-based copolymers with adjustable amount of ester groups in the main chain to be synthesized, leading to nearly complete hydrolytic degradation (5% KOH aqueous solution, ambient temperature). The noncytotoxicity of the obtained copolymers was shown on three different cell lines (i.e., fibroblasts, endothelial cells and macrophages), representing a promising approach for the design of degradable precursors for PEGylation and bioconjugation via the NMP technique.