RESUMO
Chiral packing of ligands on the surface of nanoparticles (NPs) is of fundamental and practical importance, as it determines how NPs interact with each other and with the molecular world. Herein, for gold nanorods (NRs) capped with end-grafted nonchiral polymer ligands, we show a new mechanism of chiral surface patterning. Under poor solvency conditions, a smooth polymer layer segregates into helicoidally organized surface-pinned micelles (patches). The helicoidal morphology is dictated by the polymer grafting density and the ratio of the polymer ligand length to nanorod radius. Outside this specific parameter space, a range of polymer surface structures was observed, including random, shish-kebab, and hybrid patches, as well as a smooth polymer layer. We characterize polymer surface morphology by theoretical and experimental state diagrams. The helicoidally organized polymer patches on the NR surface can be used as a template for the helicoidal organization of other NPs, masked synthesis on the NR surface, as well as the exploration of new NP self-assembly modes.
RESUMO
Seed-mediated methods employing cetyltrimethylammonium bromide (CTAB) as a surfactant, and silver salts as additives, are the most common synthetic strategies for high-yield productions of quality Au nanorods. However, the mechanism of these reactions is not yet fully understood and, importantly, significant lab-to-lab reproducibility issues still affect these protocols. In this study, the direct correlation between the hidden content of iodide impurities in CTAB reagents, which can drastically differ from different suppliers or batches, and the optimal concentration of silver required to maximize the nanorods yield is demonstrated. As a result, high-quality nanorods are obtained at different iodide contents. These results are interpreted based on the different concentrations of CTAB and cetyltrimethylammonium iodide (CTAI) complexes with Ag+ and Au+ metal ions in the growth solution, and their different binding affinity and reduction potential on distinct crystallographic planes. Notably, the exhaustive conversion of CTAI-Au+ to CTAI-Ag+ appears to be the key condition for maximizing the nanorod yield.
RESUMO
Future progress in nanoscience and nanotechnology necessitates further development of versatile, labor-, and cost-efficient surface patterning strategies. A new approach to nanopatterning is reported, which utilizes surface segregation of a smooth layer of an end-grafted homopolymer in a poor solvent. The variation in polymer grafting density yields a range of surface nanostructures, including randomly organized pinned spherical micelles, worm-like structures, networks, and porous films. The capability to use the polymer patterns for site-specific deposition of small molecules, polymers, or nanoparticles is shown. This versatile strategy enables patterning of curved surfaces with direct access to the substrate and no need in changing polymer composition to realize different surface patterns.
RESUMO
In the search for new building blocks of nanofibrillar hydrogels, cellulose nanocrystals (CNCs) have attracted great interest because of their sustainability, biocompatibility, ease of surface functionalization, and mechanical strength. Making these hydrogels fluorescent extends the range of their applications in tissue engineering, bioimaging, and biosensing. We report the preparation and properties of a multifunctional hydrogel formed by CNCs and graphene quantum dots (GQDs). We show that although CNCs and GQDs are both negatively charged, hydrogen bonding and hydrophobic interactions overcome the electrostatic repulsion between these nanoparticles and yield a physically cross-linked hydrogel with tunable mechanical properties. Owing to their shear-thinning behavior, the CNC-GQD hydrogels were used as an injectable material in 3D printing. The hydrogels were fluorescent and had an anisotropic nanofibrillar structure. The combination of these advantageous properties makes this hybrid hydrogel a promising material and fosters the development of new manufacturing methods such as 3D printing.
RESUMO
We demonstrate a template-assisted colloidal self-assembly approach for magnetic metasurfaces on macroscopic areas. The choice of anisotropic colloidal particle geometry, assembly pattern and metallic film is based on rational design criteria, taking advantage of mirror-charge effects for gold nanorods placed on gold film. Monodisperse gold nanorods prepared utilizing wet-chemistry are arranged with high precision on wrinkled templates to form linear array-type assemblies and subsequently transferred to a thin gold film. Due to the obtained particle-to-film distance of 1.1 nm, the plasmonic mode of the nanorod is able to couple efficiently with the supporting metallic film, giving rise to a magnetic mode in the visible spectrum (721 nm). Conventional UV-vis-NIR measurements in close correlation with electromagnetic simulations provide evidence for the presence of a magnetic resonance on the macroscopic area. The herein presented scalable lithography-free fabrication process paves the road towards colloidal functional metasurfaces with an optical response in the effective magnetic permeability.
RESUMO
Inspired by the concept of living polymerization reaction, we are able to produce silver-gold-silver nanowires with a precise control over their total length and plasmonic properties by establishing a constant silver deposition rate on the tips of penta-twinned gold nanorods used as seed cores. Consequently, the length of the wires increases linearly in time. Starting with â¼210 nm × 32 nm gold cores, we produce nanowire lengths up to several microns in a highly controlled manner, with a small self-limited increase in thickness of â¼4 nm, corresponding to aspect ratios above 100, whereas the low polydispersity of the product allows us to detect up to nine distinguishable plasmonic resonances in a single colloidal solution. We analyze the spatial distribution and the nature of the plasmons by electron energy loss spectroscopy and obtain excellent agreement between measurements and electromagnetic simulations, clearly demonstrating that the presence of the gold core plays a marginal role, except for relatively short wires or high-energy modes.
Assuntos
Ouro/química , Nanotecnologia/métodos , Nanofios/química , Prata/química , Nanofios/ultraestrutura , Ressonância de Plasmônio de Superfície/métodosRESUMO
We demonstrate a novel approach for controlling the formation of line-defects in wrinkling patterns by introducing step-like changes in the Young's modulus of elastomeric substrates supporting thin, stiff layers. Wrinkles are formed upon treating the poly(dimethylsiloxane) (PDMS) substrates by UV/Ozone (UVO) exposure in a uniaxially stretched state and subsequent relaxation. Line defects such as minutiae known from fingerprints are a typical feature in wrinkling patterns. The position where these defects occur is random for homogenous substrate elasticity and film thickness. However, we show that they can be predetermined by using PDMS substrates consisting of areas with different cross-linking densities. While changing the cross-linking density is well known to influence the wrinkling wavelength, we use this parameter in this study to force defect formation. The defect formation is monitored in situ using light microscopy and the mechanical parameters/film thicknesses are determined using imaging AFM indentation measurements. Thus the observed wrinkle-wavelengths can be compared to theoretical predictions. We study the density and morphology of defects for different changes in elasticity and compare our findings with theoretical considerations based on a generalized Swift-Hohenberg-equation to simply emulate the observed pattern-formation process, finding good agreement. The fact that for suitable changes in elasticity, well-ordered defect patterns are observed is discussed with respect to formation of hierarchical structures for applications in optics and nanotechnology.
RESUMO
We present ensembles of surface-ordered nanoparticle arrangements, which are formed by template-assisted self-assembly of monodisperse, protein-coated gold nanoparticles in wrinkle templates. Centimeter-squared areas of highly regular, linear assemblies with tunable line width are fabricated and their extinction cross sections can be characterized by conventional UV/vis/NIR spectroscopy. Modeling based on electrodynamic simulations shows a clear signature of strong plasmonic coupling with an interparticle spacing of 1-2 nm. We find evidence for well-defined plasmonic modes of quasi-infinite chains, such as resonance splitting and multiple radiant modes. Beyond elementary simulations on the individual chain level, we introduce an advanced model, which considers the chain length distribution as well as disorder. The step toward macroscopic sample areas not only opens perspectives for a range of applications in sensing, plasmonic light harvesting, surface enhanced spectroscopy, and information technology but also eases the investigation of hybridization and metamaterial effects fundamentally.
RESUMO
We report on the role of surface wettability during the printing transfer of nanoparticles from wrinkled surfaces onto flat substrates. As we demonstrate, this parameter dominates the transfer process. This effect can further be utilized to transfer colloidal particles in a structured fashion, if the substrates are patterned in wettability. The resulting colloidal arrangements are highly regular over macroscopic surface areas and display distinct pattern features in both the micrometer and nanoscale regime. We study the obtained structures and discuss the potential of this approach for creating hierarchical particle assemblies of high complexity. Our findings not only contribute to a better understanding of technologically relevant colloidal assembly processes, but also open new avenues for the realization of novel materials consisting of nanoparticles. In this regard, the presented structuring method is especially interesting for the design of optically functional surface coatings.
RESUMO
Here, a new surface enhanced Raman spectroscopy (SERS) platform suitable for gas phase sensing based on the extended organization of poly-N-isopropylacrylamide (pNIPAM)-coated nanostars over large areas is presented. This system yields high and homogeneous SERS intensities, and simultaneously traps organic chemical agents as pollutants from the gas phase. pNIPAM-coated gold nanostars were organized into parallel linear arrays. The optical properties of the fabricated substrates are investigated, and applicability for advanced sensing is demonstrated through the detection in the gas phase of pyrene traces, a well-known polyaromatic hydrocarbon.
Assuntos
Resinas Acrílicas/química , Nanoestruturas/química , Hidrocarbonetos Policíclicos Aromáticos/química , Pirenos/química , Gases/química , Tamanho da Partícula , Análise Espectral Raman , Propriedades de SuperfícieRESUMO
We report a nanocolloidal hydrogel that combines the advantages of molecular hydrogels and nanoparticle-based scavengers of heavy metal ions. The hydrogel was formed by the chemical cross-linking of cellulose nanocrystals and graphene quantum dots. Over a range of hydrogel compositions, its structure was changed from lamellar to nanofibrillar, thus enabling the control of hydrogel permeability. Using a microfluidic approach, we generated nanocolloidal microgels and explored their scavenging capacity for Hg2+, Cu2+, Ni2+, and Ag+ ions. Due to the large surface area and abundance of ion-coordinating sites on the surface of nanoparticle building blocks, the microgels exhibited a high ion-sequestration capacity. The microgels were recyclable and were used in several ion scavenging cycles. These features, in addition to the sustainable nature of the nanoparticles, make this nanocolloidal hydrogel a promising ion-scavenging material.
RESUMO
Chemically and topographically patterned nanoparticles (NPs) with dimensions on the order of tens of nanometers have a diverse range of applications and are a valuable system for fundamental research. Recently, thermodynamically controlled segregation of a smooth layer of polymer ligands into pinned micelles (patches) offered an approach to nanopatterning of polymer-functionalized NPs. Control of the patch number, size, and spatial distribution on the surface of spherical NPs has been achieved, however, the role of NP shape remained elusive. In the present work, we report the role of NP shape, namely, the effect of the local surface curvature, on polymer segregation into surface patches. For polymer-functionalized metal nanocubes, we show experimentally and theoretically that the patches form preferentially on the high-curvature regions such as vertices and edges. An in situ transformation of the nanocubes into nanospheres leads to the change in the number and distribution of patches; a process that is dominated by the balance between the surface energy and the stretching energy of the polymer ligands. The experimental and theoretical results presented in this work are applicable to surface patterning of polymer-capped NPs with different shapes, thus enabling the exploration of patch-directed self-assembly, as colloidal surfactants, and as templates for the synthesis of hybrid nanomaterials.
RESUMO
Nanorattles are metallic core-shell particles with core and shell separated by a dielectric spacer. These nanorattles have been identified as a promising class of nanoparticles, due to their extraordinary high electric-field enhancement inside the cavity. Limiting factors are reproducibility and loss of axial symmetry owing to the movable metal core; movement of the core results in fluctuation of the nanocavity dimensions and commensurate variations in enhancement factor. We present a novel synthetic approach for the robust fixation of the central gold rod within a well-defined box, which results in an axisymmetric nanorattle. We determine the structure of the resulting axisymmetric nanorattles by advanced transmission electron microscopy (TEM) and small-angle X-ray scattering (SAXS). Optical absorption and scattering cross-sections obtained from UV-vis-NIR spectroscopy quantitatively agree with finite-difference time-domain (FDTD) simulations based on the structural model derived from SAXS. The predictions of high and homogenous field enhancement are evidenced by scanning TEM electron energy loss spectroscopy (STEM-EELS) measurement on single-particle level. Thus, comprehensive understanding of structural and optical properties is achieved for this class of nanoparticles, paving the way for photonic applications where a defined and robust unit cell is crucial.
RESUMO
Discrete gold nanoparticle crystals with tunable size and morphology are fabricated via a fast and inexpensive template-assisted method. The highly precise hierarchical organization of the plasmonic building blocks yields superstructures with outstanding behaviour for surface-enhanced Raman scattering analysis.
RESUMO
In this work, we investigate the ligand exchange of cetyltrimethylammonium bromide (CTAB) with bovine serum albumin for gold nanorods. We demonstrate by surface-enhanced Raman scattering measurements that CTAB, which is used as a shape-directing agent in the particle synthesis, is completely removed from solution and particle surface. Thus, the protein-coated nanorods are suitable for bioapplications, where cationic surfactants must be avoided. At the same time, the colloidal stability of the system is significantly increased, as evidenced by spectroscopic investigation of the particle longitudinal surface plasmon resonance, which is sensitive to aggregation. Particles are stable at very high concentrations (cAu 20 mg/mL) in biological media such as phosphate buffer saline or Dulbecco's Modified Eagle's Medium and over a large pH range (2-12). Particles can even be freeze-dried (lyophilized) and redispersed. The protocol was applied to gold nanoparticles with a large range of aspect ratios and sizes with main absorption frequencies covering the visible and the near-IR spectral range from 600 to 1100 nm. Thus, these colloidally stable and surfactant-free protein-coated nanoparticles are of great interest for various plasmonic and biomedical applications.
Assuntos
Materiais Revestidos Biocompatíveis/síntese química , Coloides/química , Ouro/química , Nanopartículas Metálicas/química , Nanotubos/química , Soroalbumina Bovina/química , Adsorção , Estabilidade de Medicamentos , Nanopartículas Metálicas/ultraestrutura , Nanotubos/ultraestrutura , Tamanho da Partícula , Ligação Proteica , Propriedades de Superfície , Tensoativos/químicaRESUMO
We investigate the effect of surfactant-mediated, asymmetric silver overgrowth of gold nanorods on their intrinsic optical properties. From concentration-dependent experiments, we established a close correlation of the extinction in the UV/vis/NIR frequency range and the morphological transition from gold nanorods to Au@Ag cuboids. Based on this correlation, a generic methodology for in situ monitoring of the evolution of the cuboid morphology was developed and applied in time-dependent experiments. We find that growth rates are sensitive to the substitution of the surfactant headgroup by comparison of benzylhexadecyldimethylammonium chloride (BDAC) with hexadecyltrimethylammonium chloride (CTAC). The time-dependent overgrowth in BDAC proceeds about 1 order of magnitude slower than in CTAC, which allows for higher control during silver overgrowth. Furthermore, silver overgrowth results in a qualitatively novel optical feature: Upon excitation inside the overlap region of the interband transition of gold and intraband of silver, the gold core acts as a retarding element. The much higher damping of the gold core compared to the silver shell in Au@Ag cuboids induces mirror charges at the core/shell interface as shown by electromagnetic simulations. Full control over the kinetic growth process consequently allows for precise tailoring of the resonance wavelengths of both modes. Tailored and asymmetric silver-overgrown gold nanorods are of particular interest for large-scale fabrication of nanoparticles with intrinsic metamaterial properties. These building blocks could furthermore find application in optical sensor technology, light harvesting, and information technology.
RESUMO
We demonstrate the large-scale organisation of anisotropic nanoparticles into linear assemblies displaying optical anisotropy on macroscopic areas. Monodisperse gold nanorods with a hydrophilic protein shell are arranged by dip-coating on wrinkled surfaces and subsequently transferred to indium tin oxide (ITO) substrates by capillary transfer printing. We elucidate how tuning the wrinkle amplitude enables us to precisely adjust the assembly morphology and fabricate single, double and triple nanorod lines. For the single lines, we quantify the order parameter of the assemblies as well as interparticle distances from scanning electron microscopy (SEM) images. We find an order parameter of 0.97 and a mean interparticle gap size of 7 nm. This combination of close to perfect uni-axial alignment and close-packing gives rise to pronounced macroscopic anisotropic optical properties due to strong plasmonic coupling. We characterise the optical response of the assemblies on ITO-coated glass via UV/vis/NIR spectroscopy and determine an optical order parameter of 0.91. The assemblies are thus plasmonic metamaterials, as their periodicity and building block sizes are well below the optical wavelength. The presented approach does not rely on lithographic patterning and provides access to functional materials, which could have applications in subwavelength waveguiding, photovoltaics, and for large-area metamaterial fabrication.
RESUMO
In this contribution, we present a three-step pathway to produce a novel fiber coating, study its embedding in epoxy resin and characterize its nanomechanical properties at the interface between fiber and matrix. Inorganic surfaces were sulfhydrylated for subsequent use in thiol-initiated ene photopolymerization. The influence of water on the sulfhydrylation process was studied to find conditions allowing monomolecular deposition. Surface morphology as well as SH-content were evaluated by UV/vis spectroscopy, atomic force microscopy and spectroscopic ellipsometry. Brush-like polymer layers (PS and PMMA) were introduced by UV-light initiated surface polymerization of vinyl monomers. Polymer growth and morphology were studied. After embedding, the nanomechanics of the interfacial region of the fibers was studied. AFM force spectroscopy allowed the mapping of the stiffness distribution at the cross-section of the composite with high spatial resolution. Elastic moduli were determined by Hertzian contact mechanics. The individual phases of the composite material (fiber, interphase, and matrix) can be clearly distinguished based on their mechanical response. The synthesis, morphology, and mechanical properties of an interphase based on a polymeric graft-film swollen with matrix material are shown, and perspectives of these novel coatings for improved matrix-fiber compatibility and interfacial adhesion are discussed.