RESUMO
Relationship between the local structures of middle lanthanoid elements (Ln; Eu, Gd, Tb, and Dy) in their complex oxides and the characteristic features of the L1-edge and L3-edge X-ray absorption near edge structure (XANES) was investigated. There was a significant correlation between the pre-edge peak areas of the Ln L1-edge or the full widths at half maximum of the white line of the Ln L3-edge XANES spectra and the abstract physical indexes defined by bond angles formed by the middle Ln elements and the two adjacent oxygen atoms, which act as indicators of local configurational disorder of the target element. Theoretical simulation based on multiple scattering theory revealed that the pre-edge peak in the Ln L1-edge XANES spectra originates due to the p-d hybridization that occurs above the Fermi energy. This systematic survey demonstrated a universal method to estimate the local structure of the middle Ln elements by means of XANES spectroscopy.
RESUMO
The role of catalyst support and regioselectivity of molecular adsorption on a metal oxide surface is investigated for NO reduction on a Cu/γ-alumina heterogeneous catalyst. For the solid surface, computational models of the γ-alumina surface are constructed based on the Step-by-Step Hydrogen Termination (SSHT) approach. Dangling bonds, which appear upon cutting the crystal structure of a model, are terminated stepwise with H atoms until the model has an appropriate energy gap. The obtained SSHT models reflect the realistic infrared (IR) and ultraviolet-visible (UV/Vis) spectra. Vibronic coupling density (VCD), as a reactivity index, is employed to elucidate the regioselectivity of Cu adsorption on γ-alumina and that of NO adsorption on Cu/γ-alumina in place of the frontier orbital theory that could not provide clear results. We discovered that the highly dispersed Cu atoms are loaded on Lewis-basic O atoms, which is known as the anchoring effect, located in the tetrahedral sites of the γ-alumina surface. The role of the γ-alumina support is to raise the frontier orbital of the Cu catalyst, which in turn gives rise to the electron back-donation from Cu/γ-alumina to NO. In addition, the penetration of the VCD distribution of Cu/γ-alumina into the γ-alumina support indicates that the excessive reaction energy dissipates into the support after NO adsorption and reduction. In other words, the support plays the role of a heat bath. The NO reduction on Cu/γ-alumina proceeds even in an oxidative atmosphere because the Cu-NO bond is strong compared to the Cu-O2 bond.
RESUMO
Improvement of the low-temperature activity for NO oxidation catalysts is a crucial issue to improve the NOx storage performance in automotive catalysts. We have recently reported that the lattice oxygen species in SrFeO3-δ (SFO) are reactive in the oxidation of NO to NO2 at low temperatures. The oxidation of NO using lattice oxygen species is a powerful means to oxidize NO in such kinetically restricted temperature regions. This paper shows that Fe-site substitution of SFO with Mn or Co improves the properties of lattice oxygen such as the temperature and amount of oxygen release/storage, resulting in the enhancement of the activity for NO oxidation in a low-temperature range. In particular, NO oxidation on SrFe0.8Mn0.2O3-δ is found to proceed even at extremely low temperatures <423 K. From oxygen release/storage profiles obtained by temperature-programmed reactions, Co doping into SFO increases the amount of released oxygen owing to the reducibility of the Co species and promotes the phase transformation to the brownmillerite phase. On the other hand, Mn doping does not increase the oxygen release amount and suppresses the phase transformation. However, it significantly decreases the oxygen migration barrier of SFO. Substitution with Mn renders the structure of SFO more robust and maintains the perovskite structure after the release of oxygen. Thus, the oxygen release properties are strongly dependent on the crystal structure change before and after oxygen release from the perovskite structure, which has a significant effect on NO oxidation and the NOx storage performance.
RESUMO
This paper describes a systematic study of the spectra and local structures of lanthanide (Ln) L-edge XANES. We found that Ln L1 and L3 -edge XANES spectra exhibit characteristic features correlated to their local symmetry through experimental and theoretical simulations. We also propose a simple local structure index criterion for a combination of XANES study and theoretical simulation. Possible solutions of intrinsic problems such as low resolution of characteristic features in the Ln L-edge XANES and site distributions are also discussed.
RESUMO
Ni-Cu alloy supported on γ-Al2O3 catalysts prepared by high-temperature hydrogen reduction exhibit high catalytic activity and durability for a three-way catalytic reaction under both oxidative and reductive conditions because of their self-regenerating feature. DFT calculations showed that Ni-oxide was reduced to Ni metal by CO in the presence of Cu metal because of the Ni-Cu alloy effect but was not in the absence of Cu metal.
RESUMO
The dynamic behavior of Rh species in 1 wt% Rh/Al2O3 catalyst during the three-way catalytic reaction was examined using a micro gas chromatograph, a NOx meter, a quadrupole mass spectrometer, and time-resolved quick X-ray absorption spectroscopy (XAS) measurements at a public beamline for XAS, BL01B1 at SPring-8, operando. The combined data suggest different surface rearrangement behavior, random reduction processes, and autocatalytic oxidation processes of Rh species when the gas is switched from a reductive to an oxidative atmosphere and vice versa. This study demonstrates an implementation of a powerful operando XAS system for heterogeneous catalytic reactions and its importance for understanding the dynamic behavior of active metal species of catalysts.
RESUMO
Correction for 'Necessary and sufficient conditions for the successful three-phase photocatalytic reduction of CO2 by H2O over heterogeneous photocatalysts' by Kentaro Teramura et al., Phys. Chem. Chem. Phys., 2018, 20, 8423-8431.
RESUMO
Artificial photosynthesis has recently drawn an increasing amount of attention due to the fact that it allows for direct solar-to-chemical energy conversion. However, one of the basic steps of this process, namely the reduction of CO2 by H2O to afford O2 and CO2 reduction products (CO2RPs) such as HCOOH, CO, HCHO, CH3OH, and CH4, is very difficult to achieve. In contrast to the CO2 reduction in plants and homogenous systems, the reduction of CO2 to CO2RPs over heterogeneous photocatalysts was challenged by the competing reduction of H+ to H2. Unfortunately, most of the research performed so far has focused only on the reduction of CO2, rather than the characterization of the H2O oxidation and H2 production. Moreover, the fact that the heterogeneous photocatalytic reduction of CO2 into CO2RPs by H2O should satisfy several selectivity criteria has often been ignored. Herein, we propose three such evaluation criteria, namely (1) the origin of carbon in CO2RPs (determined using isotopically labeled CO2 (13CO2)), (2) the relative amount of H2 and CO2RPs produced, and (3) the amount of O2 produced by the oxidation of H2O. If all these criteria are satisfied, i.e., the carbons of CO2RPs originate from CO2, the amount of H2 produced is negligible, and a stoichiometric amount of O2 is produced by the oxidation of H2O, then CO2 introduced into the gas phase is believed to be reduced by H2O to CO2RPs in the aqueous phase.
RESUMO
Modification of the surface of Ga2O3 with rare-earth elements enhanced the evolution of CO as a reduction product in the photocatalytic conversion of CO2 using H2O as an electron donor under UV irradiation in aqueous NaHCO3 as a pH buffer, with the rare-earth species functioning as a CO2 capture and storage material. Isotope experiments using 13CO2 as a substrate clearly revealed that CO was generated from the introduced gaseous CO2. In the presence of the NaHCO3 additive, the rare-earth (RE) species on the Ga2O3 surface are transformed into carbonate hydrates (RE2(CO3)3·nH2O) and/or hydroxycarbonates (RE2(OH)2(3-x)(CO3)x) which are decomposed upon photoirradiation. Consequently, Ag-loaded Yb-modified Ga2O3 exhibits much higher activity (209 µmol h-1 of CO) than the pristine Ag-loaded Ga2O3. The further modification of the surface of the Yb-modified Ga2O3 with Zn afforded a selectivity toward CO evolution of 80%. Thus, we successfully achieved an efficient Ag-loaded Yb- and Zn-modified Ga2O3 photocatalyst with high activity and controllable selectivity, suitable for use in artificial photosynthesis.
RESUMO
This study proves that a small amount of Pd loading (1 wt%) on Sr3Fe2O7-δ can dramatically enhance the oxygen-storage properties of Sr3Fe2O7-δ. The topotactic oxygen intake and release between Sr3Fe2O6.75 and Sr3Fe2O6 takes place in response to gas switching between an O2 flow and H2 flow, regardless of the presence or absence of Pd loading. The effect of Pd loading is significant for the oxygen-release process under H2 atmosphere; that is, highly dispersed Pd metal nanoparticles sized less than 1 nm formed on Pd/Sr3Fe2O7-δ to promote H2 dissociation, resulting in the improvement of the oxygen-release temperature and rate. Pd/Sr3Fe2O7-δ with a layered perovskite structure has a higher oxygen-release property at lower temperature than Pd/SrFeO3-δ with a perovskite phase without the layered structure. These facts indicate that the surface reaction as well as the crystal structure are responsible for the oxide ion mobility in perovskite structure, and also provide guidelines for designing novel oxygen-storage materials.
RESUMO
This account describes the work of our group in the selective catalytic reduction of nitrogen oxides (NOx ) with ammonia over heterogeneous photocatalysts (photo-SCR) in the past 16 years. We have found that the photo-SCR proceeds over heterogeneous photocatalysts using a gas flow reactor, elucidated the reaction mechanism under UV- and visible-light irradiation by spectroscopic and kinetic studies, and developed a highly active photo-SCR system by improving the photocatalyst material itself and the reaction system with several approaches based on the reaction mechanism.
RESUMO
Layered double hydroxide (LDH) photocatalysts, including Ni-Al LDH, are active for the photocatalytic conversion of CO2 in water under UV light irradiation. In this study, we found that a series of LDHs exhibited anodic photocurrent which is a characteristic feature corresponding to n-type materials. Also, we estimated the potentials of photogenerated electrons and holes for LDHs, which are responsible for the photocatalytic reactions, using electrochemical techniques. The flat band potential of the Ni-Al LDH photocatalyst was estimated to be -0.40 V vs. NHE (pH = 0), indicating that the potential of the photogenerated electron is sufficient to reduce CO2 to CO. Moreover, we revealed that the flat band potentials of M(2+)-M(3+) LDH are clearly influenced by the type of trivalent metal (M(3+)) components.
RESUMO
The photocatalytic conversion of CO2 into useful chemical compounds in water without using organic sacrificial reagents is a promising method to overcome environmental and energy problems. Various synthesized layered double hydroxides (LDHs) are capable of reducing CO2 to CO in an aqueous solution under UV light irradiation. However, it is difficult to oxidize H2O to O2 in a photocatalytic system using LDHs as photocatalysts. In this study, we investigated the photocatalytic conversion of CO2 using a Ni-Al LDH in an aqueous solution of NaCl. Hypochlorous acid (HClO) was produced as an oxidation product of Cl(-) with the formation of reduction products such as CO and H2 under photoirradiation. We propose the inclusion of Cl(-) in the reaction solution to be one of the most promising ways for obtaining a hole scavenger, an approach that would enable the construction of an artificial photosynthesis system for the conversion of CO2.
RESUMO
The characteristic peaks (pre-edge peaks) in the La L1-edge X-ray absorption near edge structure (XANES) of various La complex oxides were analyzed by both experimental and theoretical approaches. The pre-edge peak areas are correlated with the bond angle analysis (BAA) parameter, which we proposed as an indicator of the centrosymmetry or disorder of the local configuration of the La site. The origin of the pre-edge peak and the parameterization criteria of the BAA parameter were evaluated using theoretical calculations based on molecular orbital theory and multiple scattering theory. The theoretical calculations showed that the origin of the pre-edge peak at the La L1-edge is electric dipole transition from 2s to unoccupied states generated by p-d hybridization. Medium-scale theoretical simulations of the La L1-edge XANES spectra of thousands of virtual La aqueous complex models verified that the parameterization criteria of the BAA parameter are applicable to local configuration analysis of La.
RESUMO
The effect of SO2 gas was investigated on the activity of the photo-assisted selective catalytic reduction of nitrogen monoxide (NO) with ammonia (NH3) over a TiO2 photocatalyst in the presence of excess oxygen (photo-SCR). The introduction of SO2 (300 ppm) greatly decreased the activity of the photo-SCR at 373 K. The increment of the reaction temperature enhanced the resistance to SO2 gas, and at 553 K the conversion of NO was stable for at least 300 min of the reaction. X-ray diffraction, FTIR spectroscopy, thermogravimetry and differential thermal analysis, x-ray photoelectron spectroscopy (XPS), elemental analysis and N2 adsorption measurement revealed that the ammonium sulfate species were generated after the reaction. There was a strong negative correlation between the deposition amount of the ammonium sulfate species and the specific surface area. Based on the above relationship, we concluded that the deposition of the ammonium sulfate species decreased the specific surface area by plugging the pore structure of the catalyst, and the decrease of the specific surface area resulted in the deactivation of the catalyst.
RESUMO
Photocatalytic conversion of CO2 to reduction products, such as CO, HCOOH, HCHO, CH3OH, and CH4, is one of the most attractive propositions for producing green energy by artificial photosynthesis. Herein, we found that Ga2O3 photocatalysts exhibit high conversion of CO2. Doping of Zn species into Ga2O3 suppresses the H2 evolution derived from overall water splitting and, consequently, Zn-doped, Ag-modified Ga2O3 exhibits higher selectivity toward CO evolution than bare, Ag-modified Ga2O3. We observed stoichiometric amounts of evolved O2 together with CO. Mass spectrometry clarified that the carbon source of the evolved CO is not the residual carbon species on the photocatalyst surface, but the CO2 introduced in the gas phase. Doping of the photocatalyst with Zn is expected to ease the adsorption of CO2 on the catalyst surface.
RESUMO
Primary alcohols are selectively converted into aldehydes by using a Nb(2)O(5) photocatalyst under visible-light irradiation. A strong interaction between the alcohol and Nb(2)O(5) generates a donor level within the forbidden band of Nb(2)O(5), which provides a visible-light-harvesting ability. Over oxidation of aldehydes into carboxylic acids does not proceed under visible-light irradiation.
Assuntos
Álcoois/química , Aldeídos/síntese química , Luz , Nióbio/química , Óxidos/química , Aldeídos/química , Catálise , Estrutura Molecular , Oxirredução , Processos FotoquímicosRESUMO
La L1 and L3-edge X-ray absorption near-edge structure (XANES) of various La oxides were classified according to the local configuration of La. We found a correlation between both of the areas of the pre-edge peaks of the La L1-edge XANES spectra and the full width at half-maximum of white line of La L3-edge XANES spectra and the local configuration of La. Theoretical calculation of the XANES spectra and local density of states reveals the difference of La L1 and L3-edge XANES spectra of various La compounds is related to the p-d hybridization of the unoccupied band and broadening of the d band of La induced by the difference of local configuration. In addition, simplified bond angle analysis parameters defined by the angles of the La atom and the two adjacent oxygen atoms are correlated to the pre-edge peak intensity of the La L1-edge XANES spectra. These results indicate that quantitative analysis of La L1 and L3-edge XANES spectra could be an indicator of the local structure of La materials.
RESUMO
Thermally stable Brønsted acid sites were generated on alumina-supported niobium oxide (Nb2O5/Al2O3) by calcination at high temperatures, such as 1123 K. The results of structural characterization by using Fourier-transform infrared (FTIR) spectroscopy, TEM, scanning transmission electron microscopy (STEM), and energy-dispersive X-ray (EDX) analysis indicated that the Nb2O5 monolayer domains were highly dispersed over alumina at low Nb2O5 loadings, such as 5 wt%, and no Brønsted acid sites were presents. The coverage of Nb2O5 monolayer domains over Al2O3 increased with increasing Nb2O5 loading and almost-full coverage was obtained at a loading of 16 wt%. A sharp increase in the number of hydroxy groups, which acted as Brønsted acid sites, was observed at this loading level. The relationship between the acidic properties and the structure of the material suggested that the bridging hydroxy groups (Nb-O(H)-Nb), which were formed at the boundaries between the domains of the Nb2O5 monolayer, acted as thermally stable Brønsted acid sites.
RESUMO
An environmental catalyst in which a transition metal (Mn, Fe, or Co) was substituted into the Ti site of the host material, SrTiO3, was synthesized, and the reactivity of lattice oxygen was evaluated. For CO oxidation, Mn- and Co-doped SrTiO3 catalysts, which provided high thermal stabilities, exhibited higher activities than Pt/Al2O3 catalysts despite their low surface areas. Temperature-programmed reduction experiments using X-ray absorption fine structure (XAFS) measurements showed that the lattice oxygen of Co-doped catalyst was released at the lowest temperature. Isotopic experiments with CO and 18O2 revealed that the lattice oxygen was involved in CO oxidation on Fe- and Co-doped catalysts; that is, CO oxidation on these catalysts proceeded via the Mars-van Krevelen mechanism. On the other hand, for Mn-doped catalyst, the contribution of lattice oxygen to CO oxidation was relatively negligible, indicating that the reaction proceeded according to the Langmuir-Hinshelwood mechanism. This paper clearly demonstrates that the catalytic mechanism can be adjusted by substituting transition metals into SrTiO3.