RESUMO
BACKGROUND: Laparoscopic subtotal cholecystectomy (LSC) is a recognised alternative to laparoscopic cholecystectomy (LC) when it is unsafe to achieve the "critical view of safety". Although LSC reduces the risk of bile duct injury, it is associated with increased morbidity, primarily due to bile leak. LSC can be classified as fenestrating (F-LSC) or reconstituting (R-LSC), with the latter being more complex. The objective of this study was to evaluate the two LSC techniques, their complications, and overall outcomes. METHODS: We conducted a retrospective analysis of all adult patients who underwent LSC between January 2015 and December 2021 using our electronic database. Data collected included patient demographics, prior acute biliary presentations, operative details/techniques, length of stay (LOS), 30-day complications, 30-day mortality, readmissions, and follow-up investigations/procedures. Descriptive statistics, Chi-squared tests, and relative risk were employed for data analysis. RESULTS: In the study period, LSC was performed on 170 patients, showing an increasing trend over time. Most procedures (76%) were performed in the acute setting, and 37.1% of patients had a history of previous acute biliary presentations. Fenestrating LSC was the most performed technique (115 [67.6%] vs. 55 [32.4%]). Complications occurred in 80 (47.1%) patients; 60 patients (35.3%) had a bile leak. 16 patients (9.4%) required reoperation, and readmission was observed in 14 patients (8.2%). F-LSC was associated with more complications [p = 0.03 RR 2.46 (95% CI 1.5-4)], more bile leaks [p < 0.01, RR 2.1 (95% CI 1.2-3.7)], greater need for rescue postoperative endoscopic retrograde cholangiopancreatography (ERCP) [p < 0.01, RR 3.8 (95% CI 1.4-10.2)], and longer LOS (6 vs. 4 days p < 0.01). CONCLUSION: Although LSC is seen as a safe alternative to open conversion, our findings demonstrate a high morbidity, including reoperation/reintervention, readmissions, and complications, associated with LSC especially with F-LSC. We suggest that if LSC is performed, the reconstituted technique should be chosen, if feasible.
Assuntos
Doenças Biliares , Colecistectomia Laparoscópica , Adulto , Humanos , Colecistectomia Laparoscópica/métodos , Estudos Retrospectivos , Colangiopancreatografia Retrógrada Endoscópica , Tempo de InternaçãoRESUMO
Efficient plastic recycling processes are crucial for the production of value-added products or intermediates. Here, we present a multicatalytic route that allows the degradation of nitrile-butadiene rubber, cross-metathesis of the formed oligomers, and polymerization of the resulting dicarboxylic acids with bio-based diols, providing direct access to unsaturated polyesters. This one-pot approach combines the use of commercially available catalysts that are active and selective under mild conditions to synthesize renewable copolymers without the need to isolate intermediates.
RESUMO
This symposium is the third PSL (Paris Sciences & Lettres) Chemical Biology meeting (2016, 2019, 2023) held at Institut Curie. This initiative originally started at Institut de Chimie des Substances Naturelles (ICSN) in Gif-sur-Yvette (2013, 2014), under the directorship of Professor Max Malacria, with a strong focus on chemistry. It was then continued at the Institut Curie (2015) covering a larger scope, before becoming the official PSL Chemical Biology meeting. This latest edition was postponed twice for the reasons that we know. This has given us the opportunity to invite additional speakers of great standing. This year, Institut Curie hosted around 300 participants, including 220 on site and over 80 online. The pandemic has had, at least, the virtue of promoting online meetings, which we came to realize is not perfect but has its own merits. In particular, it enables those with restricted time and resources to take part in events and meetings, which can now accommodate unlimited participants. We apologize to all those who could not attend in person this time due to space limitation at Institut Curie.
Assuntos
Biologia , Humanos , ParisRESUMO
Almost all aspects of daily life involve polymers in some form or the other. However, polymer production is largely based on finite feedstocks. These limitations combined with environmental concerns force us to rethink the strategies for the synthesis of these materials. As an abundant and renewable resource, biomass is composed of a very diverse range of molecules that deserve to be valorized. The development of new methods for transforming biomass into resources suitable for polymer production remains a crucial hurdle on the road to a more sustainable chemical economy. The main challenge is to design efficient and selective transformations of abundant and inexpensive raw materials into innovative polymers. For the chemical industry to meet these challenges, process intensification must play an important role in developing cleaner and more energy-efficient technologies while aiming for safer and more sustainable processes. Catalysis is an important tool to support more sustainable plastics production by being ideally efficient, practical, and versatile. In this regard, the creation of sustainable polymers through one-pot catalysis represents an exciting frontier in materials science.In this Account, we describe some of the published advances for achieving one-pot synthesis of biobased monomers and the resulting (co)polymers. These studies demonstrate that one-pot reactions can produce sustainable materials for a wide range of applications. We show that these new multistep "one-pot" approaches are very promising from an academic and industrial point of view. These synthetic schemes have indeed allowed us to investigate the formation of new polyesters, polypeptides, and poly(meth)acrylates by different polymerization mechanisms. We discuss their efficiency by highlighting their ability to perform multiple (quantitative) synthetic transformations and bond formation steps while bypassing multiple purification procedures at the same time. While enabling the development of novel polymeric structures, we demonstrate that these one-pot procedures can also contribute to reducing the environmental footprint.In light of the growing concerns for sustainable development, these procedures may therefore allow, in the near future, one to prepare sustainable polymeric materials with advanced properties through extremely simplified routes from renewable feedstocks. Among these materials, block and alternating copolymers are unique structures that can exhibit a wide range of properties. While their multistep synthesis remains a demanding process, the one-pot synthesis of these polymers is much more scalable and can create multiblock or alternating copolymers with a wide range of potential sequences. These approaches then give access to materials whose structure and functionality can be designed to suit the need.
Assuntos
Poliésteres , Polímeros , Biomassa , Catálise , Polimerização , Polímeros/químicaRESUMO
We demonstrate that the strong N2 bond can be efficiently dissociated at low pressure and ambient temperature on a Si(111)-7x7 surface. The reaction was experimentally investigated by scanning tunnelling microscopy and X-ray photoemission spectroscopy. Experimental and density functional theory results suggest that relatively low thermal energy collision of N2 with the surface can facilitate electron transfer from the Si(111)-7x7 surface to the π*-antibonding orbitals of N2 that significantly weaken the N2 bond. This activated N2 triple bond dissociation on the surface leads to the formation of a Si3 N interface.
RESUMO
This review highlights recent developments in the field of biodegradable polymeric materials intended to replace non-degradable conventional plastics, focusing on studies from the last ten years involving the stereoselective ring-opening polymerization of cyclic esters. This encompasses exciting advances in both catalyst design and monomer scope. Notably, the last decade has seen the emergence of metal-free stereocontrolled ROP for instance, as well as the synthesis and stereocontrolled polymerization of new types of chiral monomers. This study will emphasize recent stereoselective polymerization catalysts and chiral monomers and will focus on stereocontrol quantification, the mechanisms of stereocontrol and their differentiation if reported and studied for a specific catalyst system.
Assuntos
Poliésteres , Polímeros , Catálise , Ésteres , PolimerizaçãoRESUMO
The most versatile furanic building block for chemical and polymer applications is 2,5-furandicarboxylic acid. However, the classical 2,5-furandicarboxylic acid production methodology has been found to have significant drawbacks that hinder industrial-scale production. This review highlights new alternative methods to synthesize 2,5-furandicarboxylic acid that are both more advantageous and attractive than conventional oxidation of 5-hydroxymethylfurfural. This review also focuses on the use of 2,5-furandicarboxylic acid as a polymer precursor and the various potential applications that arise from these furan-based materials.
Assuntos
Ácidos Dicarboxílicos , Polímeros , Furanos , OxirreduçãoRESUMO
The design of new materials with tunable properties and intrinsic recyclability, derived from biomass under mild conditions, stands as a gold standard in polymer chemistry. Reported herein are platinum complexes which catalyze the formation of poly(silylether)s (PSEs) at low catalyst loadings. These polymers are directly obtained from dual-functional biobased building blocks such as 5-hydroxymethylfurfural (HMF) or vanillin, coupled with various dihydrosilanes. Access to different types of copolymer architectures (statistical or alternating) is highlighted by several synthetic strategies. The materials obtained were then characterized as low Tg materials (ranging from -60 to 29 °C), stable upon heating (T-5% up to 301 °C) and resistant towards uncatalyzed methanolysis. Additionally, quantitative chemical recycling of several PSEs could be triggered by acid-catalyzed hydrolysis or methanolysis. These results emphasize the interest of biobased poly(silylether)s as sustainable materials with high recycling potential.
RESUMO
A [Ni/Mg]-catalyzed orthogonal tandem polymerization has been developed starting from enol phosphates. Initial investigations conducted on branched 1,3-dienes as monomers enabled identification of a Mg-initiated polymerization process leading to 1,4-cis-polydienes. When aryl enol phosphates are used as monomers, the [Ni/Mg]-catalyzed tandem polymerization affords 1,4-cis-polydienes with selectivities up to 99%. Elastomeric or crystalline materials were obtained by simple structural modifications of the monomeric unit. This tandem approach appears as a straightforward and efficient way to enforce diversity and selectivity in diene polymerization while retaining a fair degree of control, just as observed for stepwise systems that are accessible through established time- and manpower-consuming synthetic procedures.
RESUMO
To prepare biobased polymers, particular attention must be paid to the obtention of the monomers from which they are derived. (Meth)acrylates and their analogs constitute such a class of monomers that have been extensively studied due to the wide range of polymers accessible from them. This review therefore aims to highlight the progresses made in the production and polymerization of (meth)acrylates and their analogs. Acrylic acid production from biomass is close to commercialization, as three different high-potential intermediates are identified: glycerol, lactic acid, and 3-hydroxypropionic acid. Biobased methacrylic acid is less common, but several promising options are available, such as the decarboxylation of itaconic acid or the dehydration of 2-hydroxyisobutyric acid. Itaconic acid is also a vinylic monomer of great interest, and polymers derived from it have already found commercial applications. Methylene butyrolactones are promising monomers, obtained from bioresources via three different intermediates: levulinic, succinic, or itaconic acid. Although expensive, methylene butyrolactones have a strong potential for the production of high-performance polymers. Finally, ß-substituted acrylic monomers, such as cinnamic, fumaric, muconic, or crotonic acid, are also examined, as they provide an original access to biobased materials from various renewable raw materials, such as protein waste, lignin, or wastewater.
Assuntos
Acrilatos , Polímeros , Lignina , PolimerizaçãoRESUMO
AIM: Emergency colorectal surgery is associated with significant morbidity and mortality. Most general surgeons have a subspecialty, which forms the focus of their elective work, allowing development of specialist skill sets. The aim of this study was to assess the impact of consultant subspecialization on patient outcomes following emergency colorectal resections. METHODS: Data were requested for all emergency admissions under a general surgeon between 1 January 2002 and 31 December 2016 within the north of England. These were acquired from individual Trusts following Caldicott approval. Data included demographics, diagnoses and any procedures undertaken. Patients were assigned to cohorts based on the subspecialist interest of the consultant they were under the care of. The primary outcome of interest was 30-day postoperative mortality. Categorical data were compared with the chi-squared test, and continuous data with the t test or ANOVA. A logistic regression model determined factors associated with 30-day in-hospital mortality. RESULTS: Overall, 7648 emergency colorectal resections were performed with a 30-day postoperative mortality of 13.8%. This was significantly lower if the responsible consultant was a colorectal surgeon compared with other general surgery subspecialties (11.8% vs. 15.2%, P < 0.001). This was significant on univariate analysis (OR 0.75, P < 0.001); however, following multivariable adjustment, this was not statistically significant (P = 0.380). The colorectal specialists had a higher laparoscopy rate than their colleagues-9.8% versus 6.8% (P < 0.001). Stoma rates were also lower (46.9% vs. 51.0%, P = 0.001) and anastomosis rates higher (55.9% vs. 49.3%, P < 0.001) amongst colorectal surgeons. CONCLUSION: These findings add to the growing body of evidence that patient outcomes may be improved by involving subspecialists in colorectal emergencies.
Assuntos
Neoplasias Colorretais , Cirurgia Colorretal , Neoplasias Colorretais/cirurgia , Emergências , Inglaterra , Humanos , Estudos RetrospectivosRESUMO
Shifting from petrochemical feedstocks to renewable resources can address some of the environmental issues associated with petrochemical extraction and make plastics production sustainable. Therefore, there is a growing interest in selective methods for transforming abundant renewable feedstocks into monomers suitable for polymer production. Reported herein are one-pot catalytic systems, that are active, productive, and selective under mild conditions for the synthesis of copolymers from renewable materials. Each system allows for anhydride formation, alcohol acylation and/or acid esterification, as well as polymerization of the formed (meth)acrylates, providing direct access to a new library of unique poly(meth)acrylates.
RESUMO
Enantiopure poly(lactic acid) (PLA) can form stereocomplexes when enantiomeric PLA chains are mixed in equivalent amounts. Such materials provide interesting features that might be suitable for numerous applications. Despite several advantages, the main drawback of PLA is its narrow window of processing, thus limiting its use for industrial applications. Reported herein are achiral iron complexes, that are highly active, productive, and stereoselective under mild reaction conditions for the ring-opening polymerization of lactide. The corresponding catalytic systems enable the production of stereoblock polymers with high molecular weights, allowing the formation of thermally stable and industrially relevant stereocomplexes.
RESUMO
We report here a unique example of an in situ generated aluminum initiator stabilized by a C2-symmetric salen ligand which shows a hitherto unknown high activity for the ROP of rac-lactide at room temperature. Using a simple and robust catalyst system, which is prepared from a salen complex and an onium salt, this convenient route employs readily available reagents that afford polylactide in good yields with narrow polydispersity indices, without the need for time-consuming and expensive processes that are typically required for catalyst preparation and purification. In line with the experimental evidence, DFT studies reveal that initiation and propagation proceed via an external alkoxide attack on the coordinated monomer.
RESUMO
The enantiomeric state of a supramolecular copper catalyst can be switched in situ in ca. five seconds. The dynamic property of the catalyst is provided by the non-covalent nature of the helical assemblies supporting the copper centers. These assemblies are formed by mixing an achiral benzene-1,3,5-tricarboxamide (BTA) phosphine ligand (for copper coordination) and both enantiomers of a chiral phosphine-free BTA co-monomer (for chirality amplification). The enantioselectivity of the hydrosilylation reaction is fixed by the BTA enantiomer in excess, which can be altered by simple BTA addition. As a result of the complete and fast stereochemical switch, any combination of the enantiomers was obtained during the conversion of a mixture of two substrates.
RESUMO
The creation of polymers by tandem catalysis represents an exciting frontier in materials science. Tandem catalysis is one of the strategies used by Nature for building macromolecules. Living organisms generally synthesize macromolecules by in vivo enzyme-catalyzed chain growth polymerization reactions using activated monomers that have been formed within cells during complex metabolic processes. However, these biological processes rely on highly complex biocatalysts, thus limiting their industrial applications. In order to obtain polymers by tandem catalysis, homogeneous and enzyme catalysts have played a leading role in the last two decades. In the following feature article, we will describe selected published efforts to achieve these research goals.
Assuntos
Polímeros/síntese química , Animais , Biocatálise , Catálise , Técnicas de Química Sintética/métodos , Humanos , Polímeros/química , Polímeros/metabolismoRESUMO
Furfural is an industrially relevant biobased chemical platform. Unlike classical furan, or C-alkylated furans, which have been previously described in the current literature, the =C5H bond of furfural is unreactive. As a result, on a large scale, C=C and C=O bond hydrogenation/hydrogenolysis is mainly performed, with furfuryl alcohol and methyl tetrahydrofuran being the two main downstream chemicals. Here, we show that the derivatization of the -CHO group of furfural restores the reactivity of its =C5H bond, thus permitting its double condensation on various alkyl aldehydes. Overcoming the recalcitrance of the =C5H bond of furfural has opened an access to a biobased monomer, whose potential have been investigated in the fabrication of renewably-sourced poly(silylether). By means of a combined theoretical-experimental study, a reactivity scale for furfural and its protected derivatives against carbonylated compounds has been established using an electrophilicity descriptor, a means to predict the molecular diversity and complexity this pathway may support, and also to de-risk any project related to this topic. Finally, by using performance criteria for industrial operations in the field of fuels and commodities, we discussed the industrial potential of this work in terms of cost, E-factor, reactor productivity and catalyst consumption.
RESUMO
Clostridioides difficile is the leading cause of antibiotic-associated diarrhea and pseudomembranous colitis in adults. Various C. difficile strains circulate currently, associated with different outcomes and antibiotic resistance profiles. However, most studies still focus on the reference strain 630 that does not circulate anymore, partly due to the lack of immunological tools to study current clinically important C. difficile PCR ribotypes. The goal of this study was to generate monoclonal antibodies recognizing various epidemic ribotypes of C. difficile. To do so, we immunized mice expressing human variable antibody genes with the Low Molecular Weight (LMW) subunit of the surface layer protein SlpA from various C. difficile strains. Monoclonal antibodies purified from hybridomas bound LMW with high-affinity and whole bacteria from current C. difficile ribotypes with different cross-specificities. This first collection of anti-C. difficile mAbs represent valuable tools for basic and clinical research.
RESUMO
Most germane: Hexacoordinate germanium(IV) species exhibit unprecedented activities, yet controlled behavior, as initiators for the ring-opening polymerization of rac-lactide to form polylactide polymers.