FTIR matrix-isolation study of the reaction products of vanadium atoms with propene: observation of allylvanadium hydride as a precursor to sacrificial hydrogenation of propene.

Vanadium atoms have been reacted with different partial pressures of propene in Ar under matrix-isolation conditions, and the products have been observed using Fourier transform infrared (FTIR) spectroscopy. Under dilute propene in Ar conditions, new features are observed in the IR spectra corresponding to a C-H insertion product, identified here as H-V-(η(3)-allyl). Use of d(3)-propene (CD(3)-CH═CH(2)) demonstrates that the initial V-atom insertion occurs at the methyl group of the propene molecule, and DFT calculations have been used to support the identity of the initial product. Upon increasing the partial pressure of propene, additional features corresponding to propane (C(3)H(8)) are observed, with the hydrogen-atom source for the observed hydrogenation demonstrated to be additional propene units. Analysis of a systematic increase in the partial pressure of propene in the system demonstrates that the yield of propane correlates with the decrease of the allyl product, demonstrating the H-V(allyl) species as a reactive intermediate in the overall hydrogenation process. An overall mechanism is proposed to rationalize the formation of the insertion product and ultimately the products of hydrogenation, which agrees with previous gas-phase and matrix-isolation work involving propene and the related system, ethene.

FTIR analysis of dimethyl ether decomposition products following charge transfer ionization with Ar+ under matrix isolation conditions.

Fourier transform infrared spectroscopic analysis has been performed on argon matrices formed following electron bombardment of argon/dimethyl ether mixtures. Products consistent with the ionization and subsequent fragmentation of dimethyl ether cation have been observed. Following ionization of dimethyl ether, fragmentation occurs that is consistent with ionization energy greater than 15 eV due to efficient charge transfer from dimethyl ether to Ar(+) as the major ionization process. Major products observed in the infrared spectra are methane, formaldehyde, HCO(*), CO, and Ar(2)H(+). These products are consistent with the known fragmentation of photoionized dimethyl ether in a 15-16 eV ionization energy range. However, the observation of dehydrogenated products is consistent with additional abstraction of hydrogen from proximally located species isolated within the matrix. Analogous experiments employing CD(3)OCH(3) give similar results, and the observed isotopically substituted products are consistent with the proposed fragmentation pathways.

Acetone cation chemistry under varying electron density conditions: from unimolecular decomposition to dissociative recombination processes.

The chemistry of ionized acetone:Ar mixtures under varied ionizing electron density conditions has been studied using matrix-isolation techniques. Gaseous acetone diluted in excess argon gas was subjected to electron bombardment with 300 eV electrons at currents between 20 and 200 µA. Linear wire 'pin' and metal 'plate' electron collector geometries were employed, allowing a wide range of electron density conditions to be explored. The products of subsequent reaction processes were matrix isolated and analyzed by Fourier transform infrared absorption spectroscopy. Products included methane, ketene, 1-propen-2-ol (the enol isomer of acetone), CO, HCO, ethane, ethane, acetylene and CCCO. Product absolute and relative yields varied with acetone number density, the choice of anode geometry and the rate of electron bombardment. The overall chemistry observed is rationalized in terms of mechanistic steps involving unimolecular cation decomposition, ion-molecule reactions, radical-radical reactions and dissociative recombination processes.

Ethane cation decomposition characterization by EBMI spectroscopy: gas-phase dissociative recombination as a source of secondary products.

The decomposition products of the d(6) -ethane cation following charge-transfer ionization with Ar(+) , under conditions of varying ionization electron current, have been isolated in solid argon matrices at 18 K and examined using Fourier transform infrared spectroscopy. Gas samples containing 1 : 1600 d(6) -ethane : Ar were subjected to electron bombardment by using either a high (pin) or a low (plate) ionization density anode configuration with ionization currents between 20 and 150 µA. Under high ionization density conditions, the observed major products were d(4) -ethene (C(2) D(4) ) and d(2) -acetylene (C(2) D(2) ), with smaller yields of C(2) D(5) , C(2) D(3) , and C(2) D. The yield of each dehydrogenation product was enhanced with increased current. Analogous experiments employing the low ionization density plate anode resulted in reduced C(2) D(6) destruction and the formation of only C(2) D(4) and C(2) D(2) . The results suggest the onset of dissociative recombination processes under high ion density conditions. In this context, the results can be interpreted as a dissociative recombination of primary ion products, which gives rise to further dehydrogenation, and appearance of additional neutral radical products.

Electron-bombardment matrix isolation and PEPICO studies as complementary techniques in ion chemistry: an FTIR study of the decomposition of the vinyl fluoride cation.

FTIR spectra have been obtained for matrices formed following electron bombardment of gas mixtures containing varying amounts of vinyl fluoride (VF) in Ar (1:400 to 1:25,600; VF/Ar). The major matrix-isolated products are a π-complex of HF/C(2)H(2) , fluoroacetylene (HC≡CF) and two isomers of C(2)H(2)F(•). These products correspond well with the products of photoionization of VF near 15.8 eV. These observations support the dominant mechanism of ionization in the EB-MI environment as charge transfer of the substrate molecule to Ar(•+). Some differences are noted between the observed EB-MI products and the results from PEPICO studies, primarily in that the EB-MI products are observed as neutralized forms. The close correlation in EB-MI and photoionization results allows the EB-MI technique to be utilized as an ion structural analysis tool in complement to PEPICO studies, and allows the use of PEPICO studies to help predict and elucidate high-pressure chemistry mechanisms through EB-MI studies. The differences in the EB-MI results and ions observed using the PEPICO technique are rationalized in terms of the differences in the experimental techniques. Using VF as the test system, reagent partial pressure conditions that best complement PEPICO studies are determined. Although the major results are observed for all VF partial pressures, dilute samples give rise to further ionization of the primary products, and more concentrated samples give rise to radical-radical reaction chemistry. As a result, a nominal range of 1:3200 (VF/Ar) is demonstrated to provide the best correlation with the gas-phase PEPICO measurements.

Fourier transform infrared matrix-isolation analysis of acetaldehyde fragmentation products after charge exchange with Ar•+ under varied ionization density conditions.

The products of the Ar(•+) charge exchange ionization of acetaldehyde have been isolated and compared with related photoionization results and computational work. Acetaldehyde has been used to assess the effect of varied ion density in the ionization region of the electron bombardment matrix isolation apparatus. The amount of acetaldehyde destruction has been measured for constant gas-sample composition and constant ionization current for two anode geometries: a pin anode and a plate anode. For the same ionization current, a pin-shaped anode demonstrates higher precursor molecule destruction efficiency (85%) than the plate-shaped anode (30%), resulting in substantial effect on the yield and quantity of isolated products. When the plate anode is used, the observed infrared products correspond to matrix-isolated carbon monoxide (CO), methane (CH(4)), ketene (CH(2)CO), ethynyloxy radical (HCCO), formyl radical (HCO(•)), acetyl radical (CH(3)CO(•)), vinyl alcohol (H(2)C = CH-OH), and cationic proton-bound dimer, Ar(2)H(+). When the pin anode is used, the same products are observed with different relative proportions and new absorption features corresponding to dicarbon monoxide (CCO) and methyl radical (CH(3)(•)) are observed. The surprising observation of infrared absorptions corresponding to vinyl alcohol along with low yield of products anticipated through the analysis of photoelectron-photoionization coincidence measurements suggests that the initially formed fragmentation products are able to further react within the matrix-isolation environment to influence observed product yields. Related experiments, using the isotopomer CD(3)CHO, suggest that the observed products are formed via radical-radical reactions that occur under the high pressure conditions of the matrix isolation environment.

The chemistry of ionized acetone/Ar mixtures under varying gas flow and mole ratio conditions: a matrix-isolation study.

The chemistry of ionized acetone:Ar mixtures under varying total gas flow rate and acetone:Ar mole ratio conditions has been studied using matrix-isolation techniques. Gaseous acetone diluted in excess argon gas was subjected to electron bombardment with 300-eV electrons. The products of subsequent reaction processes were matrix isolated and analyzed by Fourier transform infrared (FTIR) absorption spectroscopy. Products included 1-propen-2-ol (the enol isomer of acetone), methane, ketene, carbon monoxide, ethane, ethene, acetylene and tricarbon monoxide. Variations in the total flow rate of gas resulted in changes in the efficiency of product formation without significant changes in the relative amounts of the major species formed. Variations in the acetone:Ar mole ratio at fixed total gas flow resulted in striking variations in the products formed, demonstrating a shift from single acetone molecule-derived charge-transfer ionization chemistry at low acetone mole ratios, to processes consistent with the participation of two or more acetone molecules at intermediate mole ratios. These results are interpreted in the context of ion-molecule reaction processes, the onset of which occurs at intermediate acetone mole ratios. Ethane dehydrogenation products are proposed to result from product secondary ionization, a process that is prevalent at high ionizing electron fluxes.

Ethene insertion into vanadium hydride intermediates formed via vanadium atom reaction with water or ethene: a matrix isolation infrared spectroscopic study.

The reaction of V atoms with H2O and various concentrations of C2D4 in argon has been investigated by matrix isolation infrared (IR) spectroscopy. Both C2D6 and CD2H-CD2H are observed as the major products of a set of parallel processes involving hydrogenation of ethene where the formal source of hydrogen is either C2D4 or H2O. Portions of the IR spectrum of CD2H-CD2H isolated in an argon matrix are observed for the first time. For experiments involving low concentrations of C2D4, irradiation of the matrix with light of wavelengths >455 nm results in VH2 formation, with limited observation of ethene hydrogenation. The source of H2 is believed to be due to photoelimination of molecular hydrogen from HO-V-H species, during matrix deposition, with OV as an additional product. Recombination of OV with available H2 in the matrix is proposed as the source of OVH2 under low ethene conditions. No evidence for VD2 formation is observed under our conditions. At higher C2D4 concentrations, VH2 formation is suppressed, while products of ethene hydrogenation are maximized. A second process competing with H2 elimination in which HO-V-H reacts with C2D4 is proposed. Parallel reaction schemes involving V atom insertion into the O-H bonds of water or the photoinduced insertion of V atoms into the C-D bonds of C2D4 are proposed to account for the observed hydrogenation products. In each mechanism, insertion of C2D4 into the V-H or V-D bonds of transient intermediates is followed by photoinduced elimination of the associated ethane isotopomer.

Photoinduced ethane formation from reaction of ethene with matrix-isolated Ti, V, or Nb atoms.

The reactions of matrix-isolated Ti, V, or Nb atoms with ethene (C(2)H(4)) have been studied by FTIR absorption spectroscopy. Under conditions where the ethene dimer forms, metal atoms react with the ethene dimer to yield matrix-isolated ethane (C(2)H(6)) and methane. Under lower ethene concentration conditions ( approximately 1:70 ethene/Ar), hydridic intermediates of the types HMC(2)H(3) and H(2)MC(2)H(2) are also observed, and the relative yield of hydrocarbons is diminished. Reactions of these metals with perdeuterioethene, and equimolar mixtures of C(2)H(4) and C(2)D(4), yield products that are consistent with the production of ethane via a metal atom reaction involving at least two C(2)H(4) molecules. The absence of any other observed products suggests the mechanism also involves production of small, highly symmetric species such as molecular hydrogen and metal carbides. Evidence is presented suggesting that ethane production from the ethene dimer is a general photochemical process for the reaction of excited-state transition-metal atoms with ethene at high concentrations of ethene.

Observation of the pi...H hydrogen-bonded ternary complex, (C(2)H(4))(2)H(2)O, using matrix isolation infrared spectroscopy.

FTIR absorption spectra of water-containing ethene:Ar matrices, with compositions of ethene up to 1:10 ethene:Ar, have been recorded. Systematically increasing the concentration of ethene reveals features in the spectra consistent with the known 1:1 ethene:water complex, which subsequently disappear on further increase in ethene concentration. At high concentrations of ethene, new features are observed at 3669 and 3585 cm(-1), which are red-shifted with respect to matrix-isolated nu(3) and nu(1) O-H stretching modes of water and the 1:1 ethene:water complex. These shifts are consistent with a pi...H interaction of a 2:1 ethene:water complex of the form (C(2)H(4)...H-O-H...C(2)H(4)). The analogous (C(2)D(4))(2)H(2)O complex shows little shifting from positions associated with (C(2)H(4))(2)H(2)O, while the (C(2)H(4))(2)D(2)O isotopomer shows large shifts to 2722.3 and 2617.2 cm(-1), having identical nu(3)(H(2)O)/nu(3)(D(2)O) and nu(1)(H(2)O)/nu(1)(D(2)O) values when compared with monomeric water isotopomers. Features at 3626.1 and 2666.2 cm(-1) are also observed and are attributed to (C(2)H(4))(2)HDO. DFT calculations at the B3LYP/6-311+G(d,p) level for each isotopomer are presented, and the predicted vibrational frequencies are directly compared with experimental values. The interaction energy for the formation of the 2:1 ethene:water complex from the 1:1 ethene:water complex is also presented.

Cluster size selectivity in the product distribution of ethene dehydrogenation on niobium clusters.

Ethene reactions with niobium atoms and clusters containing up to 25 constituent atoms have been studied in a fast-flow metal cluster reactor. The clusters react with ethene at about the gas-kinetic collision rate, indicating a barrierless association process as the cluster removal step. Exceptions are Nb8 and Nb10, for which a significantly diminished rate is observed, reflecting some cluster size selectivity. Analysis of the experimental primary product masses indicates dehydrogenation of ethene for all clusters save Nb10, yielding either Nb(n)C2H2 or Nb(n)C2. Over the range Nb-Nb6, the extent of dehydrogenation increases with cluster size, then decreases for larger clusters. For many clusters, secondary and tertiary product masses are also observed, showing varying degrees of dehydrogenation corresponding to net addition of C2H4, C2H2, or C2. With Nb atoms and several small clusters, formal addition of at least six ethene molecules is observed, suggesting a polymerization process may be active. Kinetic analysis of the Nb atom and several Nb(n) cluster reactions with ethene shows that the process is consistent with sequential addition of ethene units at rates corresponding approximately to the gas-kinetic collision frequency for several consecutive reacting ethene molecules. Some variation in the rate of ethene pick up is found, which likely reflects small energy barriers or steric constraints associated with individual mechanistic steps. Density functional calculations of structures of Nb clusters up to Nb(6), and the reaction products Nb(n)C2H2 and Nb(n)C2 (n = 1...6) are presented. Investigation of the thermochemistry for the dehydrogenation of ethene to form molecular hydrogen, for the Nb atom and clusters up to Nb6, demonstrates that the exergonicity of the formation of Nb(n)C2 species increases with cluster size over this range, which supports the proposal that the extent of dehydrogenation is determined primarily by thermodynamic constraints. Analysis of the structural variations present in the cluster species studied shows an increase in C-H bond lengths with cluster size that closely correlates with the increased thermodynamic drive to full dehydrogenation. This correlation strongly suggests that all steps in the reaction are barrierless, and that weakening of the C-H bonds is directly reflected in the thermodynamics of the overall dehydrogenation process. It is also demonstrated that reaction exergonicity in the initial partial dehydrogenation step must be carried through as excess internal energy into the second dehydrogenation step.