Dynamic Nanocellulose Networks for Thermoset-like yet Recyclable Plastics with a High Melt Stiffness and Creep Resistance.

Many polymers, including polyethylene, feature a relatively low melting point and hence must be cross-linked to make them viable for applications that demand a high stiffness and creep resistance at elevated temperatures. The resulting thermoset plastics cannot be recycled, and therefore alternative materials with a reconfigurable internal network structure are in high demand. Here, we establish that such a thermoset-like yet recyclable material can be realized through the addition of a nanocellulose reinforcing agent. A network consisting of cellulose nanocrystals, nano- or microfibrils imparts many of the characteristics that are usually achieved through chemical cross-linking. For instance, the addition of only 7.5 wt % of either nanocellulose material significantly enhances the melt stiffness of an otherwise molten ethylene-acrylate copolymer by at least 1 order of magnitude. At the same time, the nanocellulose network reduces the melt creep elongation to less than 10%, whereas the neat molten matrix would rupture. At high shear rates, however, the molten composites do not display a significantly higher viscosity than the copolymer matrix, and therefore retain the processability of a thermoplastic material. Repeated re-extrusion at 140 °C does not compromise the thermomechanical properties, which indicates a high degree of recyclability. The versatility of dynamic nanocellulose networks is illustrated by 3D printing of a cellulose composite, where the high melt stiffness improves the printability of the resin.

Enhanced growth of neural networks on conductive cellulose-derived nanofibrous scaffolds.

The problem of recovery from neurodegeneration needs new effective solutions. Tissue engineering is viewed as a prospective approach for solving this problem since it can help to develop healthy neural tissue using supportive scaffolds. This study presents effective and sustainable tissue engineering methods for creating biomaterials from cellulose that can be used either as scaffolds for the growth of neural tissue in vitro or as drug screening models. To reach this goal, nanofibrous electrospun cellulose mats were made conductive via two different procedures: carbonization and addition of multi-walled carbon nanotubes. The resulting scaffolds were much more conductive than untreated cellulose material and were used to support growth and differentiation of SH-SY5Y neuroblastoma cells. The cells were evaluated by scanning electron microscopy and confocal microscopy methods over a period of 15 days at different time points. The results showed that the cellulose-derived conductive scaffolds can provide support for good cell attachment, growth and differentiation. The formation of a neural network occurred within 10 days of differentiation, which is a promising length of time for SH-SY5Y neuroblastoma cells.