RESUMO
Artificial solid electrolyte interphase (SEI) layers have been widely regarded as an effective protection for lithium (Li) metal anodes. In this work, an artificial SEI film consisting of dense Li6.4La3Zr1.4Ta0.6O12 (LLZTO) nanoparticles and polymerized styrene butadiene rubber is designed, which has good mechanical and chemical stability to effectively prevent Li anode corrosion by the electrolyte. The LLZTO-based SEI film can not only guide Li to uniformly deposit at the interface but also accelerate the electrochemical reaction kinetics due to its high Li+ conductivity. In particular, the high Young's modulus of the LLZTO-based SEI will regulate e- distribution in the continuous Li plating/stripping process and achieve uniform deposition of Li. As a consequence, the Li anode with LLZTO-based SEI (Li@LLZTO) enables symmetric cells to demonstrate a stable overpotential of 25 mV for 600 h at a current density of 1 mA cm-2 for 1 mA h cm-2. The Li@LLZTO||LFP (LiFePO4) full cell exhibits a capacity of 106 mA h g-1 after 800 cycles at 5 C with retention as high as 90%. Our strategy here suggests that the artificial SEI with high Young's modulus effectively inhibits the formation of Li dendrites and provides some guidance for the design of higher performance Li metal batteries.
RESUMO
The severe shuttling behavior in the discharging-charging process largely hampers the commercialization of lithium-sulfur (Li-S) batteries. Herein, we design a bifunctional separator with an ultra-lightweight MnO2 coating to establish strong chemical adsorption barriers for shuttling effect alleviation. The double-sided polar MnO2 layers not only trap the lithium polysulfides through extraordinary chemical bonding but also ensure the uniform Li+ flux on the lithium anode and inhibit the side reaction, resulting in homogeneous plating and stripping to avoid corrosion of the Li anode. Consequently, the assembled Li-S battery with the MnO2-modified separator retains a capacity of 665 mA h g-1 at 1 C after 1000 cycles at the areal sulfur loading of 2.5 mg cm-2, corresponding to only 0.028% capacity decay per cycle. Notably, the areal loading of ultra-lightweight MnO2 coating is as low as 0.007 mg cm-2, facilitating the achievement of a high energy density of Li-S batteries. This work reveals that the polar metal oxide-modified separator can effectively inhibit the shuttle effect and protect the Li anode for high-performance Li-S batteries.
RESUMO
A medicinal chemistry program based on the small-molecule HCV NS5A inhibitor daclatasvir has led to the discovery of dimeric phenylthiazole compound 8, a novel and potent HCV NS5A inhibitor. The subsequent SAR studies and optimization revealed that the cycloalkyl amide derivatives 27a-29a exhibited superior potency against GT1b with GT1b EC50 values at picomolar concentration. Interestingly, high diastereospecificity for HCV inhibition was observed in this class with the (1R,2S,1'R,2'S) diastereomer displaying the highest GT1b inhibitory activity. The best inhibitor 27a was found to be 3-fold more potent (GT1b EC50â¯=â¯0.003â¯nM) than daclatasvir (GT1b EC50â¯=â¯0.009â¯nM) against GT1b, and no detectable in vitro cytotoxicity was observed (CC50â¯>â¯50⯵M). Pharmacokinetic studies demonstrated that compound 27a had an excellent pharmacokinetic profiles with a superior oral exposure and desired bioavailability after oral administration in both rats and dogs, and therefore it was selected as a developmental candidate for the treatment of HCV infection.
Assuntos
Descoberta de Drogas , Hepacivirus/efeitos dos fármacos , Hepatite C/tratamento farmacológico , Tiazóis/farmacocinética , Proteínas não Estruturais Virais/antagonistas & inibidores , Amidas/química , Animais , Disponibilidade Biológica , Cães , Humanos , Ratos , Sialiltransferases/antagonistas & inibidores , Relação Estrutura-Atividade , Tiazóis/química , Tiazóis/uso terapêuticoRESUMO
Starting from the initial lead 4-phenylthiazole 18, a modest HCV inhibitor (EC50 = 9440 nM), a series of structurally related thiazole derivatives has been identified as a novel chemical class of potent and selective HCV NS5A inhibitors. The introduction of a carboxamide group between the thiazole and pyrrolidine ring (42) of compound 18 resulted in a dramatic increase in activity (EC50 = 0.92 nM). However, 42 showed only moderate pharmacokinetic properties and limited oral bioavalability of 18.7% in rats. Further optimization of the substituents at the 4-position of the thiazole ring and pyrrolidine nitrogen of the lead compound 42 led to the identification of compound 57, a highly potent and selective NS5A inhibitor of HCV (EC50 = 4.6 nM), with greater therapeutic index (CC50/EC50 > 10000). Pharmacokinetic studies revealed that compound 57 had a superior oral exposure and desired bioavailability of 45% after oral administration in rats.