RESUMO
A simple and rapid process of ReO4- (as a surrogate of TcO4-) removal from aqueous solutions based on the electrically switched ion exchange (ESIX) method has been demonstrated in this work. Activated carbon-Polypyrrole (AC-PPy) was synthesized from activated carbon and pyrrole by electrodeposition method which was served as an electrically switched ion exchanger for ReO4- removal. The characterization results show that the AC-PPy composite exhibited an excellent loading capacity and a high stability for ions uptake and release. Chronoamperometric studies show that the ESIX treatment could be completed within 60 s, demonstrating the rapid uptake and release of ions. Uptake and release of ReO4- was verified by electrochemical quartz crystal microbalance with dissipation shift (EQCMD) studies. By modulating the electrochemical potential of the AC-PPy, the uptake and release of ReO4- ions can be controlled. Similar trends of uptake and release of ReO4- were observed in cyclic voltammetry (-0.4 to 0.8 V) for five cycles with the EQCMD. X-ray photoelectron spectroscopy (XPS) confirmed the process of ReO4- removal in the AC-PPy composite. Conclusively, the smart material shows excellent efficiency and selectivity for the removal of ReO4- from aqueous solutions.
Assuntos
Polímeros , Pirróis , Carbono , Troca Iônica , ÁguaRESUMO
NdhO, a regulatory oxygenic photosynthesis-specific subunit, is close to the ferredoxin-binding site of cyanobacterial NDH-1, and its levels are negatively associated with the rates of cyclic electron transfer around PSI mediated by NDH-1 (NDH-CET). However, the effect of NdhO levels on cyanobacterial cell death triggered by high temperature remains elusive. Here, our results uncovered a synergistic effect of NdhO levels on the cell death and reactive oxygen species (ROS) accumulation when cyanobacterial cells grown at 30°C for 1 day were transferred to 45°C for 2 days. Such synergistic effect was found to be closely associated with the activities of NDH-CET and CO2 assimilation during high temperature. Collectively, we propose that the effect of NdhO levels on the cyanobacterial cell bleaching and cell death triggered by high temperature is a result of influencing production of ROS by NDH-CET, which is considered to be vital to balance the ATP/NADPH ratio and improve the Calvin-Benson cycle.
Assuntos
Cianobactérias , Complexo de Proteína do Fotossistema I , Morte Celular , Cianobactérias/química , Complexo de Proteína do Fotossistema I/metabolismo , Espécies Reativas de Oxigênio/metabolismo , TemperaturaRESUMO
Perfluorobutyric acid (PFBA) is one type of perfluoroalkyl and polyfluoroalkyl substances (PFASs) and is widely used as an industrial compound. The removal of PFBA has attracted considerable scientific interests in recent decades because it causes environmental pollution and human diseases. Currently, the adsorption method has been used commonly to remove PFASs from wastewater. However, it is usually limited by the inevitable "secondary waste" produced in this treatment process. In this work, PFBA can be effectively removed by synergistic electrical switching ion exchange (ESIX) and a new type of nanostructured ion exchanger. Herein, the nanostructured ion exchanger has been designed and synthesized by coating a polypyrrole (PPy)@Fe2O3 nanoneedle on carbon cloth (PPy@Fe2O3 NN-CC). Results show that the PPy@Fe2O3 NN-CC nanocomposite enhances ion exchange speed and efficiency, which ensures its high adsorption capacity and rapid regeneration property, thereby reducing secondary waste. Moreover, ESIX based on the PPy@Fe2O3 NN-CC nanocomposite has high selectivity for adsorption of PFBA over other common anions in water, such as Cl-, SO42-, and NO3-.
RESUMO
Recently, CuZr-based bulk metallic glass (BMG) composites reinforced by the TRIP (transformation-induced plasticity) effect have been explored in attempt to accomplish an optimal of trade-off between strength and ductility. However, the design of such BMG composites with advanced mechanical properties still remains a big challenge for materials engineering. In this work, we proposed a technique of instantaneously and locally arc-melting BMG plate to artificially induce the precipitation of B2 crystals in the glassy matrix and then to tune mechanical properties. Through adjusting local melting process parameters (i.e. input powers, local melting positions, and distances between the electrode and amorphous plate), the size, volume fraction, and distribution of B2 crystals were well tailored and the corresponding formation mechanism was clearly clarified. The resultant BMG composites exhibit large compressive plasticity and high strength together with obvious work-hardening ability. This compelling approach could be of great significance for the steady development of metastable CuZr-based alloys with excellent mechanical properties.
RESUMO
Nitrous oxide (N2O) emission from wastewater treatment plants (WWTPs) has received increasing attention. This paper presented how N2O emission was significantly reduced in a pilot-scale Carrousel oxidation ditch under reasonable nitrification and denitrification. N2O emission from the reactor was found as low as 0.027% of influent nitrogen, which was much less than that from other processes. Further measurements on spatial variation of N2O emission in the alternative aerobic/anoxic zones with help of a series of batch experiments demonstrated that about 90% of the emission was contributed by nitrifier denitrification (ND). Moreover, the taxonomic analysis based on high through-put 16S rRNA gene sequencing revealed that the high abundance of denitrifying bacteria and nitrite-oxidizing bacteria (NOB) was responsible for low nitrite accumulations and consequent low N2O emissions. However, N2O generation would be greatly increased upon the normal operation being shocked by either ammonia overload or aeration failure of the oxidation ditch system.