Mechanical role of the posterior column components in the cervical spine.

PURPOSE: To quantify the mechanical role of posterior column components in human cervical spine segments. METHODS: Twelve C6-7 segments were subjected to resection of (1) suprasinous/interspinous ligaments (SSL/ISL), (2) ligamenta flavum (LF), (3) facet capsules, and (4) facets. A robot-based testing system performed repeated flexibility testing of flexion-extension (FE), axial rotation (AR), and lateral bending (LB) to 2.5Nm and replayed kinematics from intact flexibility tests for each state. Range-of-motion, stiffness, moment resistance and resultant forces were calculated. RESULTS: The LF contributes largely to moment resistance, particularly in flexion. Facet joints were primary contributors to AR and LB mechanics. Moment/force responses were more sensitive and precise than kinematic outcomes. CONCLUSIONS: The LF is mechanically important in the cervical spine; its injury could negatively impact load distribution. Damage to facets in a flexion injury could lead to AR or LB hypermobility. Quantifying the contribution of spinal structures to moment resistance is a sensitive, precise process for characterizing structural mechanics.

The lateral meniscus extrudes with and without root tear evaluated using ultrasound.

PURPOSE: The purpose of the current study was to measure extrusion of the intact lateral meniscus as a function of knee flexion angle and loading condition and to compare the changes in extrusion with a posterior root tear using a robotic testing system and ultrasound. STUDY DESIGN: Controlled laboratory study. METHODS: Eight fresh-frozen cadaveric knees were subjected to external loading conditions (passive path position (no external load), 200 axial compression, 5-N-m internal tibial torque, 5-N-m valgus torque) at full extension, 30°, 60° and 90° of flexion using a robotic testing system. A linear array transducer was placed in the longitudinal orientation. Extrusion and kinematics data were recorded for two meniscus states: intact and posterior lateral root deficiency. Therefore, a complete radial root tear in the lateral meniscus at 10 mm from the tibial insertion was made in all 8 cadaveric knees using arthroscopy. The resultant forces in the lateral meniscus were also quantified by reproducing recorded paths after the removal of the lateral meniscus. RESULTS: A lateral meniscus root tear resulted in a statistically significant increase (up to 250%) of extrusion for the lateral meniscus (p < 0.05) in comparison to the intact lateral meniscus for all externally applied loads. Without external load (passive path position), significant differences were also found between the intact and posterior lateral root deficient meniscus except at full extension (1.0 ± 0.7 mm vs. 1.9 ± 0.4 mm) and 30° of flexion (1.4 ± 0.5 mm vs. 1.8 ± 0.5 mm). Overall, with increasing flexion angle, lateral meniscus extrusion decreased for the intact as well as for the posterior lateral root deficient meniscus, with the lowest measurements in response to internal tibial torque at 90° of flexion (-3.3 ± 1.1 mm). Knee kinematics were similar whether intact or posterior lateral root tear (n.s.). Ultrasound measurement of lateral meniscus extrusion showed good inter-rater (0.65 [0.30-0.97]-0.71 [0.34-0.94]) and excellent intra-rater reliability (0.81 [0.43-0.99]). CONCLUSION: Dynamic Ultrasound is a reliable diagnostic modality to measure the lateral meniscus extrusion which can be helpful in the diagnosis and quantification of lateral meniscal root tears. LEVEL OF EVIDENCE: III.