Stability and Biodistribution of Thiol-Functionalized and (177)Lu-Labeled Metal Chelating Polymers Bound to Gold Nanoparticles.

We are studying a novel radiation nanomedicine approach to treatment of breast cancer using 30 nm gold nanoparticles (AuNP) modified with polyethylene glycol (PEG) metal-chelating polymers (MCP) that incorporate 1,4,7,10-tetraazacyclododecane-1,4,7,10-tetraacetic acid (DOTA) chelators for complexing the ß-particle emitter, (177)Lu. Our objective was to compare the stability of AuNP conjugated to MCP via a single thiol [DOTA-PEG-ortho-pyridyl disulfide (OPSS)], a dithiol [DOTA-PEG-lipoic acid (LA)] or multithiol end-group [PEG-pGlu(DOTA)8-LA4] and determine the elimination and biodistribution of these (177)Lu-labeled MCP-AuNP in mice. Stability to aggregation in the presence of thiol-containing dithiothreitol (DTT), L-cysteine or glutathione was assessed and dissociation of (177)Lu-MCP from AuNP in human plasma measured. Elimination of radioactivity from the body of athymic mice and excretion into the urine and feces was measured up to 168 h post-intravenous (i.v.) injection of (177)Lu-MCP-AuNP and normal tissue uptake was determined. ICP-AES was used to quantify Au in the liver and spleen and these were compared to (177)Lu. Our results showed that PEG-pGlu(DOTA)8-LA4-AuNP were more stable to aggregation in vitro than DOTA-PEG-LA-AuNP and both forms of AuNP were more stable to thiol challenge than DOTA-PEG-OPSS-AuNP. PEG-pGlu((177)Lu-DOTA)8-LA4 was the most stable in plasma. Whole body elimination of (177)Lu was most rapid for mice injected with (177)Lu-DOTA-PEG-OPSS-AuNP. Urinary excretion accounted for >90% of eliminated (177)Lu. All (177)Lu-MCP-AuNP accumulated in the liver and spleen. Liver uptake was lowest for PEG-pGlu((177)Lu-DOTA)8-LA4-AuNP but these AuNP exhibited the greatest spleen uptake. There were differences in Au and (177)Lu in the liver for PEG-pGlu((177)Lu-DOTA)8-LA4-AuNP. These differences were not correlated with in vitro stability of the (177)Lu-MCP-AuNP. We conclude that conjugation of AuNP with PEG-pGlu((177)Lu-DOTA)8-LA4 via a multithiol functional group provided the greatest stability in vitro and lowest liver uptake in vivo and is, therefore, the most promising for constructing (177)Lu-MCP-AuNP for radiation treatment of breast cancer.

Templated fabrication of fiber-basket polymersomes via crystallization-driven block copolymer self-assembly.

Immobilizing uniform nanostructures on a mesoscale substrate is a promising approach to prepare nanometer to micrometer sized materials with new functionalities. The hierarchical structures formed depend on both the nature of the substrate and the components deposited. In this paper, we describe the use of colloidal polystyrene microbeads as a sacrificial template to create a nanofibrous network coating consisting of elongated block copolymer micelles. This network has a secondary structure very different from that of conformal coatings obtained by other methods. In addition, the fibers of the network could be elongated by crystallization-driven self-assembly. The network was locked in place by cross-linking the micelles through in situ generation of small Pt nanoparticles. Subsequent removal of the sacrificial template gave an open vesicular structure. To demonstrate further transformation of the membrane, we showed that the cross-linked micelles could also be used to embed silver nanoparticles. The sacrificial template contained known amounts of Tb and Tm ions, allowing us to estimate via atomic mass spectrometry that 85% of the template surface was covered with micelle seeds. This approach to fabricating hierarchical coating structures expands the generality and scope of template-assisted synthesis to build advanced hierarchical materials with precise morphological control.

Functional PEG-PAMAM-tetraphosphonate capped NaLnF4 nanoparticles and their colloidal stability in phosphate buffer.

Developing surface coatings for NaLnF4 nanoparticles (NPs) that provide long-term stability in solutions containing competitive ions such as phosphate remains challenging. An amine-functional polyamidoamine tetraphosphonate (NH2-PAMAM-4P) as a multidentate ligand for these NPs has been synthesized and characterized as a ligand for the surface of NaGdF4 and NaTbF4 nanoparticles. A two-step ligand exchange protocol was developed for introduction of the NH2-PAMAM-4P ligand on oleate-capped NaLnF4 NPs. The NPs were first treated with methoxy-poly(ethylene glycol)-monophosphoric acid (M(n) = 750) in tetrahydrofuran. The mPEG750-OPO3-capped NPs were stable colloidal solutions in water, where they could be ligand-exchanged with NH2-PAMAM-4P. The surface amine groups on the NPs were available for derivatization to attach methoxy-PEG (M(n) = 2000) and biotin-terminated PEG (M(n) = 2000) chains. The surface coverage of ligands on the NPs was examined by thermal gravimetric analysis, and by a HABA analysis for biotin-containing NPs. Colloidal stability of the NPs was examined by dynamic light scattering. NaGdF4 and NaTbF4 NPs capped with mPEG2000-PAMAM-4P showed colloidal stability in DI water and in phosphate buffer (10 mM, pH 7.4). A direct comparison with NaTbF4 NPs capped with a mPEG2000-lysine-based tetradentate ligand that we reported previously (Langmuir 2012, 28, 12861-12870) showed that both ligands provided long-term stability in phosphate buffer, but that the lysine-based ligand provided better stability in phosphate-buffered saline.

A high-sensitivity lanthanide nanoparticle reporter for mass cytometry: tests on microgels as a proxy for cells.

This paper addresses the question of whether one can use lanthanide nanoparticles (e.g., NaHoF4) to detect surface biomarkers expressed at low levels by mass cytometry. To avoid many of the complications of experiments on live or fixed cells, we carried out proof-of-concept experiments using aqueous microgels with a diameter on the order of 700 nm as a proxy for cells. These microgels were used to test whether nanoparticle (NP) reagents would allow the detection of as few as 100 proteins per "cell" in cell-by-cell assays. Streptavidin (SAv), which served as the model biomarker, was attached to the microgel in two different ways. Covalent coupling to surface carboxyls of the microgel led to large numbers (>10(4)) of proteins per microgel, whereas biotinylation of the microgel followed by exposure to SAv led to much smaller numbers of SAv per microgel. Using mass cytometry, we compared two biotin-containing reagents, which recognized and bound to the SAvs on the microgel. One was a metal chelating polymer (MCP), a biotin end-capped polyaspartamide containing 50 Tb(3+) ions per probe. The other was a biotinylated NaHoF4 NP containing 15 000 Ho atoms per probe. Nonspecific binding was determined with bovine serum albumin (BSA) conjugated microgels. The MCP was effective at detecting and quantifying SAvs on the microgel with covalently bound SAv (20 000 SAvs per microgel) but was unable to give a meaningful signal above that of the BSA-coated microgel for the samples with low levels of SAv. Here the NP reagent gave a signal 2 orders of magnitude stronger than that of the MCP and allowed detection of NPs ranging from 100 to 500 per microgel. Sensitivity was limited by the level of nonspecific adsorption. This proof of concept experiment demonstrates the enhanced sensitivity possible with NP reagents in cell-by-cell assays by mass cytometry.

Improving lanthanide nanocrystal colloidal stability in competitive aqueous buffer solutions using multivalent PEG-phosphonate ligands.

The range of properties available in the lanthanide series has inspired research into the use of lanthanide nanoparticles for numerous applications. We aim to use NaLnF(4) nanoparticles for isotopic tags in mass cytometry. This application requires nanoparticles of narrow size distribution, diameters preferably less than 15 nm, and robust surface chemistry to avoid nonspecific interactions and to facilitate bioconjugation. Nanoparticles (NaHoF(4), NaEuF(4), NaGdF(4), and NaTbF(4)) were synthesized with diameters from 9 to 11 nm with oleic acid surface stabilization. The surface ligands were replaced by a series of mono-, di-, and tetraphosphonate PEG ligands, whose synthesis is reported here. The colloidal stability of the resulting particles was monitored over a range of pH values and in phosphate containing solutions. All of the PEG-phosphonate ligands were found to produce non-aggregated colloidally stable suspensions of the nanoparticles in water as judged by DLS and TEM measurements. However, in more aggressive solutions, at high pH and in phosphate buffers, the mono- and diphosphonate PEG ligands did not stabilize the particles and aggregation as well as flocculation was observed. However, the tetraphosphonate ligand was able to stabilize the particles at high pH and in phosphate buffers for extended periods of time.