RESUMO
Alkene dicarbofunctionalization is a rapidly emerging tool for complex molecule synthesis that installs two carbon fragments regioselectively across an alkene. This method has the potential to engineer stereodefined polymers, yet the application of difunctionalization reactions to polymer synthesis remains unexplored. Herein, we describe the first example of a Ni-catalyzed difunctionalization of alkenes with arylboronic esters and aryl bromides innate to the alkene. The polymerization reaction proceeds regioselectively with the addition of the aryl bromide to the terminal alkenyl carbon and arylboronic ester to the internal benzylic carbon. The resultant poly[arylene-α-(aryl)ethylene]s comprise aryl groups installed at regular intervals along the polymer backbone through chain propagation in two directions. Polymers with molecular weights generally ranging from 30 to 175 kDa were obtained after successful fractionation from oligomeric species. Thermal analysis of the poly[arylene α-(aryl)ethylene]s revealed stability up to â¼399 °C, with a Tg of 90 °C, both of which are similar in value to poly(styrene)s and poly(phenylene methylene)s.
RESUMO
Thermoplastic elastomers based on ABA triblock copolymers are typically limited in modulus and strength due to crack propagation within the brittle regions when the hard end-block composition favors morphologies that exhibit connected domains. Increasing the threshold end-block composition to achieve enhanced mechanical performance is possible by increasing the number of junctions or bridging points per chain, but these copolymer characteristics also tend to increase the complexity of the synthesis. Here, we report an in situ polymerization method to successfully increase the number of effective junctions per chain through grafting of poly(styrene) (PS) to a commercial thermoplastic elastomer, poly(styrene)-poly(butadiene)-poly(styrene) (SBS). The strategy described here transforms a linear SBS triblock copolymer-styrene mixture into a linear-comb-linear architecture in which poly(styrene) (PS) grafts from the mid-poly(butadiene) (PBD) block during the polymerization of styrene. Through systematic variation in the initial SBS/styrene content, nanostructural transitions from disordered spheres to lamellar through reaction-induced phase transitions (RIPT) were identified as the styrene content increased. Surprisingly, maximum mechanical performance (Young's modulus, tensile strength, and elongation at break) was obtained with samples exhibiting lamellar nanostructures, corresponding to overall PS contents of 61-77 wt% PS (including the original PS in SBS). The PS grafting from the PBD block increases the modulus and the strength of the thermoplastic elastomer while preventing brittle fracture due to the greater number of junctions afforded by the PS grafts. The work presented here demonstrates the use of RIPT to transform standard SBS materials into polymer systems with enhanced mechanical properties.
RESUMO
A magnetic, metallic inverse opal fabricated by infiltration into a silica nanosphere template assembled from spheres with diameters less than 100 nm is an archetypal example of a "metalattice". In traditional quantum confined structures such as dots, wires, and thin films, the physical dynamics in the free dimensions is typically largely decoupled from the behavior in the confining directions. In a metalattice, the confined and extended degrees of freedom cannot be separated. Modeling predicts that magnetic metalattices should exhibit multiple topologically distinct magnetic phases separated by sharp transitions in their hysteresis curves as their spatial dimensions become comparable to and smaller than the magnetic exchange length, potentially enabling an interesting class of "spin-engineered" magnetic materials. The challenge to synthesizing magnetic inverse opal metalattices from templates assembled from sub-100 nm spheres is in infiltrating the nanoscale, tortuous voids between the nanospheres void-free with a suitable magnetic material. Chemical fluid deposition from supercritical carbon dioxide could be a viable approach to void-free infiltration of magnetic metals in view of the ability of supercritical fluids to penetrate small void spaces. However, we find that conventional chemical fluid deposition of the magnetic late transition metal nickel into sub-100 nm silica sphere templates in conventional macroscale reactors produces a film on top of the template that appears to largely block infiltration. Other deposition approaches also face difficulties in void-free infiltration into such small nanoscale templates or require conducting substrates that may interfere with properties measurements. Here we report that introduction of "spatial confinement" into the chemical fluid reactor allows for fabrication of nearly void-free nickel metalattices by infiltration into templates with sphere sizes from 14 to 100 nm. Magnetic measurements suggest that these nickel metalattices behave as interconnected systems rather than as isolated superparamagnetic systems coupled solely by dipolar interactions.
RESUMO
Engineering estimates of methane emissions from natural gas production have led to varied projections of national emissions. This work reports direct measurements of methane emissions at 190 onshore natural gas sites in the United States (150 production sites, 27 well completion flowbacks, 9 well unloadings, and 4 workovers). For well completion flowbacks, which clear fractured wells of liquid to allow gas production, methane emissions ranged from 0.01 Mg to 17 Mg (mean = 1.7 Mg; 95% confidence bounds of 0.67-3.3 Mg), compared with an average of 81 Mg per event in the 2011 EPA national emission inventory from April 2013. Emission factors for pneumatic pumps and controllers as well as equipment leaks were both comparable to and higher than estimates in the national inventory. Overall, if emission factors from this work for completion flowbacks, equipment leaks, and pneumatic pumps and controllers are assumed to be representative of national populations and are used to estimate national emissions, total annual emissions from these source categories are calculated to be 957 Gg of methane (with sampling and measurement uncertainties estimated at ± 200 Gg). The estimate for comparable source categories in the EPA national inventory is ~1,200 Gg. Additional measurements of unloadings and workovers are needed to produce national emission estimates for these source categories. The 957 Gg in emissions for completion flowbacks, pneumatics, and equipment leaks, coupled with EPA national inventory estimates for other categories, leads to an estimated 2,300 Gg of methane emissions from natural gas production (0.42% of gross gas production).
Assuntos
Poluentes Atmosféricos/análise , Monitoramento Ambiental/estatística & dados numéricos , Indústrias Extrativas e de Processamento/estatística & dados numéricos , Metano/análise , Gás Natural , Cromatografia Gasosa , Estados UnidosRESUMO
The tunable properties of thermoplastic elastomers (TPEs), through polymer chemistry manipulations, enable these technologically critical materials to be employed in a broad range of applications. The need to "dial-in" the mechanical properties and responses of TPEs generally requires the design and synthesis of new macromolecules. In these designs, TPEs with nonlinear macromolecular architectures outperform the mechanical properties of their linear copolymer counterparts, but the differences in the deformation mechanism providing enhanced performance are unknown. Here, in situ small-angle X-ray scattering (SAXS) measurements during uniaxial extension reveal distinct deformation mechanisms between a commercially available linear poly(styrene)-poly(butadiene)-poly(styrene) (SBS) triblock copolymer and the grafted SBS version containing grafted poly(styrene) (PS) chains from the poly(butadiene) (PBD) midblock. The neat SBS (φSBS = 100%) sample deforms congruently with the macroscopic dimensions, with the domain spacing between spheres increasing and decreasing along and transverse to the stretch direction, respectively. At high extensions, end segment pullout from the PS-rich domains is detected, which is indicated by a disordering of SBS. Conversely, the PS-grafted SBS that is 30 vol % SBS and 70% styrene (φSBS = 30%) exhibits a lamellar morphology, and in situ SAXS measurements reveal an unexpected deformation mechanism. During deformation, there are two simultaneous processes: significant lamellar domain rearrangement to preferentially orient the lamellae planes parallel to the stretch direction and crazing. The samples whiten at high strains as expected for crazing, which corresponds with the emergence of features in the 2D SAXS pattern during stretching consistent with fibril-like structures that bridge the voids in crazes. The significant domain rearrangement in the grafted copolymers is attributed to the new junctions formed across multiple PS domains by the grafting of a single chain. The in situ SAXS measurements provide insights into the enhanced mechanical properties of grafted copolymers that arise through improved physical cross-linking that leads to nanostructure domain reorientation for self-reinforcement and craze formation where fibrils help to strengthen the polymer.
RESUMO
BACKGROUND AND OBJECTIVES: Presymptomatic testing is available for early diagnosis of hereditary autosomal dominant polycystic kidney disease (ADPKD). However, the complex ethical and psychosocial implications can make decision-making challenging and require an understanding of patients' values, goals and priorities. This study aims to describe patient and caregiver beliefs and expectations regarding presymptomatic testing for ADPKD. DESIGN, SETTING AND PARTICIPANTS: 154 participants (120 patients and 34 caregivers) aged 18 years and over from eight centres in Australia, France and Korea participated in 17 focus groups. Transcripts were analysed thematically. RESULTS: We identified five themes: avoiding financial disadvantage (insecurity in the inability to obtain life insurance, limited work opportunities, financial burden); futility in uncertainty (erratic and diverse manifestations of disease limiting utility, taking preventive actions in vain, daunted by perplexity of results, unaware of risk of inheriting ADPKD); lacking autonomy and support in decisions (overwhelmed by ambiguous information, medicalising family planning, family pressures); seizing control of well-being (gaining confidence in early detection, allowing preparation for the future, reassurance in family resilience); and anticipating impact on quality of life (reassured by lack of symptoms, judging value of life with ADPKD). CONCLUSIONS: For patients with ADPKD, presymptomatic testing provides an opportunity to take ownership of their health through family planning and preventive measures. However, these decisions can be wrought with tensions and uncertainty about prognostic implications, and the psychosocial and financial burden of testing. Healthcare professionals should focus on genetic counselling, mental health and providing education to patients' families to support informed decision-making. Policymakers should consider the cost burden and risk of discrimination when informing government policies. Finally, patients are recommended to focus on self-care from an early age.
Assuntos
Cuidadores , Rim Policístico Autossômico Dominante , Adolescente , Adulto , Atitude , Austrália , Grupos Focais , França , Humanos , Rim Policístico Autossômico Dominante/diagnóstico , Qualidade de Vida , República da CoreiaRESUMO
Hydroxyapatite (HA) has inherently low fracture toughness and low flexural strength, thus limiting it from wide scale application as an implant material in the biomedical field. To increase the fracture toughness and flexural strength, HA composites were fabricated by adding boron nitride nanoplatelets (BNNP) as reinforcement. Spark plasma sintering was utilized to achieve fine grain structure. The addition of BNNP facilitated grain size refinement. The BNNP reinforced HA composites exhibited increased fracture toughness (2.3â¯MPaâ¯m1/2) and flexural strength (79.79â¯MPa) of HA over previous published values (1.0â¯MPaâ¯m1/2). Despite that the Weibull Distribution indicated a sacrifice in mechanical reliability, all the composites fabricated in this study showed a low probability of failure and a factor of safety (~â¯5.6) that is consistent with that of human bones (~ 6). In addition, the current study provides an approach to statistically design sintering parameters and mechanical loading for fabrication of ceramics.
Assuntos
Compostos de Boro/química , Durapatita/química , Resistência à Flexão , Nanoestruturas/química , Gases em Plasma/química , Teste de Materiais , Propriedades de SuperfícieRESUMO
INTRODUCTION: Maintaining fluid intake sufficient to reduce arginine vasopressin (AVP) secretion has been hypothesised to slow kidney cyst growth in autosomal dominant polycystic kidney disease (ADPKD). However, evidence to support this as a clinical practice recommendation is of poor quality. The aim of the present study is to determine the long-term efficacy and safety of prescribed water intake to prevent the progression of height-adjusted total kidney volume (ht-TKV) in patients with chronic kidney disease (stages 1-3) due to ADPKD. METHODS AND ANALYSIS: A multicentre, prospective, parallel-group, open-label, randomised controlled trial will be conducted. Patients with ADPKD (n=180; age ≤65 years, estimated glomerular filtration rate (eGFR) ≥30 mL/min/1.73 m2) will be randomised (1:1) to either the control (standard treatment+usual fluid intake) or intervention (standard treatment+prescribed fluid intake) group. Participants in the intervention arm will be prescribed an individualised daily fluid intake to reduce urine osmolality to ≤270 mOsmol/kg, and supported with structured clinic and telephonic dietetic review, self-monitoring of urine-specific gravity, short message service text reminders and internet-based tools. All participants will have 6-monthly follow-up visits, and ht-TKV will be measured by MRI at 0, 18 and 36 months. The primary end point is the annual rate of change in ht-TKV as determined by serial renal MRI in control vs intervention groups, from baseline to 3 years. The secondary end points are differences between the two groups in systemic AVP activity, renal disease (eGFR, blood pressure, renal pain), patient adherence, acceptability and safety. ETHICS AND DISSEMINATION: The trial was approved by the Human Research Ethics Committee, Western Sydney Local Health District. The results will inform clinicians, patients and policy-makers regarding the long-term safety, efficacy and feasibility of prescribed fluid intake as an approach to reduce kidney cyst growth in patients with ADPKD. TRIAL REGISTRATION NUMBER: ANZCTR12614001216606.
Assuntos
Ingestão de Líquidos , Hidratação/métodos , Falência Renal Crônica/prevenção & controle , Rim Policístico Autossômico Dominante/complicações , Rim Policístico Autossômico Dominante/terapia , Pressão Sanguínea , Progressão da Doença , Taxa de Filtração Glomerular , Humanos , Rim/diagnóstico por imagem , Rim/fisiopatologia , Imageamento por Ressonância Magnética , Concentração Osmolar , Estudos Prospectivos , Envio de Mensagens de TextoRESUMO
PURPOSE: Four incident reports involving missed doses of myeloid growth factors (MGFs) triggered the need for an outcome-driven initiative. From March 1, 2015, to February 29, 2016, at University of California Irvine Health Chao Infusion Center, 116 of 3,300 MGF doses were missed (3.52%), including pegfilgrastim, filgrastim, and sargramostim. We hypothesized that with the application of Lean Six Sigma methodology, we would achieve our primary objective of reducing the number of missed MGF doses to < 0.5%. METHODS: This quality improvement initiative was conducted at Chao Infusion Center as part of a Lean Six Sigma Green Belt Certification Program. Therefore, Lean Six Sigma principles and tools were used throughout each phase of the project. Retrospective and prospective medical record reviews and data analyses were performed to evaluate the extent of the identified problem and impact of the process changes. Improvements included systems applications, practice changes, process modifications, and safety-net procedures. RESULTS: Preintervention, 24 missed doses (20.7%) required patient supportive care measures, resulting in increased hospital costs and decreased quality of care. Postintervention, from June 8, 2016, to August 7, 2016, zero of 489 MGF doses were missed after 2 months of intervention ( P < .001). Chao Infusion Center reduced missed doses from 3.52% to 0%, reaching the goal of < 0.5%. CONCLUSION: The establishment of simplified and standardized processes with safety checks for error prevention increased quality of care. Lean Six Sigma methodology can be applied by other institutions to produce positive outcomes and implement similar practice changes.