A (-)-norephedrine-based molecularly imprinted polymer for the solid-phase extraction of psychoactive phenylpropylamino alkaloids from Khat (Catha edulis Vahl. Endl.) chewing leaves.

A molecularly imprinted polymer (MIP) was prepared using (-)-norephedrine as the template, methacrylic acid as the functional monomer, ethylene glycol dimethacrylate as the cross-linker and chloroform as the porogen. The MIP was used as a selective sorbent in the molecularly imprinted solid-phase extraction (MIP-SPE) of the psychoactive phenylpropylamino alkaloids, norephedrine and its analogs, cathinone and cathine, from Khat (Catha edulis Vahl. Endl.) leaf extracts prior to HPLC-DAD analysis. The MIP was able to selectively extract the alkaloids from the aqueous extracts of Khat. Loading, washing and elution of the alkaloids bound to the MIP were evaluated under different conditions. The clean baseline of the Khat extract obtained after MIP-SPE confirmed that a selective and efficient sample clean-up was achieved. Good recoveries (90.0-107%) and precision (RSDs 2.3-3.2%) were obtained in the validation of the MIP-SPE-HPLC procedure. The content of the three alkaloids in Khat samples determined after treatment with MIP-SPE and a commercial Isolute C18 (EC) SPE cartridge were in good agreement. These findings indicate that MIP-SPE is a reliable method that can be used for sample pre-treatment for the determination of Khat alkaloids in plant extracts or similar matrices and could be applicable in pharmaceutical, forensic and biomedical laboratories. Copyright © 2015 John Wiley & Sons, Ltd.

Electrospun nanofibers as sorbent material for solid phase extraction.

Electrospinning has emerged as the most versatile technique for nanofiber fabrication. Owing to their large surface area to volume ratio, electrospun nanofibers have the potential to serve as a good sorbent material for solid phase extraction (SPE) based techniques. The ability to incorporate a variety of functionalities prior or post-electrospinning presents a platform to tune the sorbents for specific applications. It is the aim of this contribution to highlight some of the recent developments that harness the great potential of electrospun nanofibers as sorbents for SPE. The review discusses the various ways in which the electrospinning technique addresses two important parameters for sorbent material, which are sorptive capacity and selectivity. It concludes by presenting and discussing the potential for development of SPE format technology and configurations based on electrospun nanofibers.

Determination of organochlorine pesticides in the agricultural soil of Oke-Osun farm settlement, Osogbo, Nigeria.

This study was conducted to evaluate the levels and seasonal variations of some organochlorine pesticides (OCPs) in the cultivated land of Oke-Osun farm settlement, Osogbo, Nigeria. A field sampling programme was conducted in the rainy and dry seasons for 4 months each resulting in the analysis of a total of 40 samples. Soil samples collected at 20-m intervals were air-dried to a constant weight, sieved through a mesh of 2.0-mm pore size and selected by coning and quartering method. Solid-liquid extraction was used to extract OCPs from the soil. Qualitative identifications and quantitative evaluation of the OCPs were carried out with the aid of a Perkin Elmer gas chromatograph coupled with electron capture detector. Seasonal mean ranges of OCPs in soil (µg/kg) were 13.09 ± 21.66 ß-BHC-42.01 ± 17.50 p, p(')-DDT in rainy season and 30.74 ± 17.38 α-BHC-82.88 ± 32.24 p, p(')-DDT in the dry season. The results obtained from this study revealed that agricultural soil samples of Oke-Osun farm settlement were contaminated with persistent organochlorine pesticides mainly as a result of their applications by farmers. Higher levels of OCPs were obtained for dry season than the rainy season. There were indications from this study that pesticides that have deleterious health effects on humans previously placed under legal restrictions by regulatory agencies were still being used by the farmers of Oke-Osun farm settlement and this gives cause for environmental concern.

Evaluation of endocrine disruptor levels in Kafue Lechwe (Kobus leche kafuensis) samples from the Blue Lagoon National Park of Zambia.

The concentrations of endocrine disruptors were determined in 36 liver tissue, serum and whole blood sample extracts drawn from 15 Blue Lagoon National Park Kafue lechwe. Out of 10 analytes evaluated, 89% of the sample extracts showed very high dieldrin concentrations of between 0.08­100 µg/mL in serum, 0.08­24.8 µg/mL in whole blood and 0.08­4.6 µg/g wet weight in liver tissue extracts. pp-DDE was detected in 83% of the sample extracts at 0.006­5.1 µg/mL in serum, 0.006­8.5 µg/mL in whole blood and 0.006­0.12 µg/g wet weight in liver tissue extracts. There was strong correlation between pp-DDE and dieldrin in all the three matrices. Deltamethrin and endosulfan detected at 50% frequency each. Percent recoveries in spiked laboratory blanks ranged between 60­100% while calculated detection limits ranged from 0.004 to 0.21 µg/mL for all the endocrine disruptors evaluated.

Sample preparation for chromatography: an African perspective.

Africa as a continent has its unique challenges for analytical chemists in sample preparation for chromatographic analyses. The areas of agriculture, environment, food and health provide formidable challenges when it comes to method development, for example, drought can result in inadequate supplies of good quality water. The testing of water quality necessitates the development of assay methods that can be employed to not only determine the quantities of pesticides associated with malaria and tsetse fly eradication programmes, but also to monitor mycotoxins or neurotoxins. Urbanisation has also meant that endocrine disruptors such as phthalate esters need to be monitored. This review will profile some of the activities by analytical chemists practising in the African continent, who seek to address some of the challenges in sample preparation for chromatographic analyses.

Determination of endocrine disruptors in Kafue lechwe (Kobus leche kafuensis) samples from the Lochinvar National Park of Zambia.

Analysis of serum, whole blood and liver tissue samples from Kafue lechwe in the Lochinvar National Park of Zambia for suspected endocrine disrupting compounds revealed high concentrations for some of the compounds. 45 samples of serum, whole blood and liver tissue were extracted by liquid-liquid extraction followed by an analysis using Gas Chromatography-Electron Capture Detection (GC-ECD). The following endocrine disruptors were analyzed: deltamethrin, aldrin, endosulfan, dieldrin, pp-DDD, heptachlor, d-t-allethrin, pp-DDE, endrin and pp-DDT. For all the samples, dieldrin showed the highest concentration ranging from 1.7 to 44.4 microg/ml in serum and whole blood sample extracts and 0.10-5.1 microg/g wet weight in liver sample extracts. The most frequently detected was deltamethrin in 62% of the samples. Percent recoveries in spiked laboratory blanks ranged between 60% and 100% while calculated detection limits ranged from 0.004 to 0.21 microg/ml for all the endocrine disruptors evaluated. Where endocrine disruptors were detected, the concentrations of most of them far exceeded the maximum residue limits (MRLs) and the extraneous maximum residue limits (EMRLs) set by the Codex Alimentarius of the United Nations (UN), Food and Agricultural Organization (FAO).

Characterisation of legumes by enzymatic hydrolysis, microdialysis sampling, and micro-high-performance anion-exchange chromatography with electrospray ionisation mass spectrometry.

An assay based on enzymatic hydrolysisand microdialysis sampling, micro-high-performance anion-exchange chromatography (micro-HPAEC) with electrospray ionisation mass spectrometry (ESI-MS) for the characterisation of legumes is presented. Characterisation of two bean varieties; Phaseolus mungo and P. acutifilous was based upon enzymatic hydrolysis using an endo-beta-mannanase from Aspergillus niger with subsequent analysis of the hydrolysates with HPAEC-MS. The hydrolysates were detected in the positive ionisation mode after desalting the chromatographic effluent, employing a cation-exchange membrane desalting device with water as the regenerating liquid. Mass chromatograms, acquiredafter hydrolysis of both bean samples for 12 h, showed two different profiles of hydrolysates. The P. mungo bean hydrolysate showed the presence of saccharides with a degree of polymerisation (DP) in the range of 2-6, whereas that of P. acutifilous showed only DPs of 2-5. Both bean samples had one type of DP 2, but showed different types of DPs 3, 4 and 5. Only the P. mungo sample showed the presence of DP 6. The most abundant fraction for P. mungo was DP 4, whereas that for P. acutifilous was DP 5. Tandem MS of the hydrolysates showed that the DP 2 hydrolysates observed for the samples were of the same type, having a 1,6 linkage. Also tandem MS data for DPs 3, 4, and 5 showed that similar hydrolysates were present within the same sample as well as among the two samples. The data also showed the existence of 1,6 linkages for DP 3, 4, and 5 hydrolysates. The single enzymatic hydrolysis in combination with microdialysis and HPAEC with ESI-MS proved to be sufficient and reproducible for profiling and showing the difference between the two bean samples.

Design, fabrication and evaluation of intelligent sulfone-selective polybenzimidazole nanofibers.

Molecularly imprinted polybenzimidazole nanofibers fabricated for the adsorption of oxidized organosulfur compounds are presented. The imprinted polymers exhibited better selectivity for their target model sulfone-containing compounds with adsorption capacities of 28.5±0.4mg g(-1), 29.8±2.2mg g(-1) and 20.1±1.4mg g(-1) observed for benzothiophene sulfone (BTO2), dibenzothiophene sulfone (DBTO2) and 4,6-dimethyldibenzothiophene sulfone (4,6-DMDBTO2) respectively. Molecular modeling based upon the density functional theory (DFT) indicated that hydrogen bond interactions may take place between sulfone oxygen groups with NH groups of the PBI. Further DFT also confirmed the feasibility of π-π interactions between the benzimidazole rings and the aromatic sulfone compounds. The adsorption mode followed the Freundlich (multi-layered) adsorption isotherm which indicated possible sulfone-sulfone interactions. A home-made pressurized hot water extraction (PHWE) system was employed for the extraction/desorption of sulfone compounds within imprinted nanofibers at 1mL min(-1), 150°C and 30 bar. PHWE used a green solvent (water) and achieved better extraction yields compared to the Soxhlet extraction process. The application of molecularly imprinted polybenzimidazole (PBI) nanofibers displayed excellent sulfur removal, with sulfur in fuel after adsorption falling below the determined limit of detection (LOD), which is 2.4mg L(-1)S, and with a sulfur adsorption capacity of 5.3±0.4mg g(-1) observed for application in the fuel matrix.

Application of Nanofiber-packed SPE for Determination of Urinary 1-Hydroxypyrene Level Using HPLC.

It is always desirable to achieve maximum sample clean-up, extraction, and pre-concentration with the minimum possible organic solvent. The miniaturization of sample preparation devices was successfully demonstrated by packing 10 mg of 11 electrospun polymer nanofibers into pipette tip micro column and mini disc cartridges for efficient pre-concentration of 1-hydroxypyrene in urine samples. 1-hydroxypyrene is an extensively studied biomarker of the largest class of chemical carcinogens. Excretory 1-hydroxypyrene was monitored with HPLC/fluorescence detector. Important parameters influencing the percentage recovery such as fiber diameter, fiber packing amount, eluent, fiber packing format, eluent volume, surface area, porosity, and breakthrough parameters were thoroughly studied and optimized. Under optimized condition, there was a near perfect linearity of response in the range of 1-1000 µg/L with a coefficient of determination (r (2)) between 0.9992 and 0.9999 and precision (% RSD) ≤7.64% (n = 6) for all the analysis (10, 25, and 50 µg/L). The Limit of detection (LOD) was between 0.022 and 0.15 µg/L. When compared to the batch studies, both disc packed nanofiber sorbents and pipette tip packed sorbents exhibited evident dominance based on their efficiencies. The experimental results showed comparable absolute recoveries for the mini disc packed fibers (84% for Nylon 6) and micro columns (80% for Nylon 6), although the disc displayed slightly higher recoveries possibly due to the exposure of the analyte to a larger reacting surface. The results also showed highly comparative extraction efficiencies between the nanofibers and conventional C-18 SPE sorbent. Nevertheless, miniaturized SPE devices simplified sample preparation, reducing back pressure, time of the analysis with acceptable reliability, selectivity, detection levels, and environmental friendliness, hence promoting green chemistry.

Electrospun carbon nanofibers from polyacrylonitrile blended with activated or graphitized carbonaceous materials for improving anodic bioelectrocatalysis.

The electrospun carbon nanofibers obtained from polyacrylonitrile (PAN) and PAN blends with either activated carbon (PAN-AC) or graphite (PAN-GR) were tested as anodes using Shewanella oneidensis MR-1. Extensive physico-chemical and electrochemical characterization confirmed their formation, their fibrous and porous nature, and their suitability as electrodes. N2 adsorption measurements revealed high specific surface area (229.8, 415.8 and 485.2m(2) g(-1)) and porosity (0.142, 0.202 and 0.239cm(3)g(-1)) for PAN, PAN-AC and PAN-GR, respectively. The chronoamperometric measurements showed a considerable decrease in start-up time and more than a 10-fold increase in the generation of current with these electrodes (115, 139 and 155µAcm(-2) for PAN, PAN-AC and PAN-GR, respectively) compared to the graphite electrode (11.5µAcm(-2)). These results indicate that the bioelectrocatalysis benefits from the blending of PAN with activated or graphitized carbonaceous materials, presumably due to the increased specific surface area, total pore volume and modification of the carbon microstructure.

Oxovanadium(IV)-catalysed oxidation of dibenzothiophene and 4,6-dimethyldibenzothiophene.

The reaction between [V(IV)OSO(4)] and the tetradentate N(2)O(2)-donor Schiff base ligand, N,N-bis(o-hydroxybenzaldehyde)phenylenediamine (sal-HBPD), obtained by the condensation of salicylaldehyde and o-phenylenediamine in a molar ratio of 2 : 1 respectively, resulted in the formation of [V(IV)O(sal-HBPD)]. The molecular structure of [V(IV)O(sal-HBPD)] was determined by single crystal X-ray diffraction, and confirmed the distorted square pyramidal geometry of the complex with the N(2)O(2) binding mode of the tetradentate ligand. The formation of the polymer-supported p[V(IV)O(sal-AHBPD)] proceeded via the nitrosation of sal-HBPD, followed by the reduction with hydrogen to form an amine group that was then linked to Merrifield beads followed by the reaction with [V(IV)OSO(4)]. XPS and EPR were used to confirm the presence of oxovanadium(IV) within the beads. The BET surface area and porosity of the heterogeneous catalyst p[V(IV)O(sal-AHBPD)] were found to be 6.9 m(2) g(-1) and 180.8 Å respectively. Microanalysis, TG, UV-Vis and FT-IR were used for further characterization of both [V(IV)O(sal-HBPD)] and p[V(IV)O(sal-AHBPD)]. Oxidation of dibenzothiophene (DBT) and 4,6-dimethyldibenzothiophene (4,6-DMDBT) was investigated using [V(IV)O(sal-HBPD)] and p[V(IV)O(sal-AHBPD)] as catalysts. Progress for oxidation of these model compounds was monitored with a gas chromatograph fitted with a flame ionization detector. The oxidation products were characterized using gas chromatography-mass spectrometry, microanalysis and NMR. Dibenzothiophene sulfone (DBTO(2)) and 4,6-dimethyldibenzothiophene sulfone (4,6-DMDBTO(2)) were found to be the main products of oxidation. Oxovanadium(IV) Schiff base microspherical beads, p[V(IV)O(sal-AHBPD)], were able to catalyse the oxidation of sulfur in dibenzothiophene (DBT) and 4,6-dimethyldibenzothiophene (4,6-DMDBT) to a tune of 88.0% and 71.8% respectively after 3 h at 40 °C. These oxidation results show promise for potential application of this catalyst in the oxidative desulfurization of crude oils.

A review of opportunities for electrospun nanofibers in analytical chemistry.

Challenges associated with analyte and matrix complexities and the ever increasing pressure from all sectors of industry for alternative analytical devices, have necessitated the development and application of new materials in analytical chemistry. To date, nanomaterials have emerged as having excellent properties for analytical chemistry applications mainly due to their large surface area to volume ratio and the availability of a wide variety of chemical and morphological modification methods. Of the available nanofibrous material fabrication methods, electrospinning has emerged as the most versatile. It is the aim of this contribution to highlight some of the recent developments that harness the great potential shown by electrospun nanofibers for application in analytical chemistry. The review discusses the use of electrospun nanofibers as a platform for low resolution separation or as a chromatographic sorbent bed for high resolution separation. It concludes by discussing the applications of electrospun nanofibers in detection systems with a specific focus on the development of simple electrospun nanofiber based colorimetric probes.

Recent progress in electrochemical oxidation of saccharides at gold and copper electrodes in alkaline solutions.

This article reviews the progress made in the past 10 years, on electrochemical oxidation of saccharides in alkaline media for gold and copper electrodes. The mechanism and processes associated with the electrochemical oxidation of saccharides at native and surface coated electrodes continues to be of great interest. Despite the effort and various mechanisms proposed, still the need for an electrochemically active material that understands the complexity associated with saccharides continues to increase as their detection poses a challenge for bioanalytical chemistry and liquid chromatography.

Determination of Cu and Ni in plants by microdialysis sampling: Comparison of dialyzable metal fractions with total metal content.

Microdialysis sampling is presented as an in situ sampling and sample clean-up technique with the potential to be used for determination of metals in plant suspension. Suspensions prepared from ultra pure water and flowers of a Blepharis aspera plant species obtained from a Cu and Ni mineralized site were sampled for Cu and Ni by microdialysis sampling after incorporating an optimal 0.05% (w/v) composition of humic acid in the perfusion liquid. Acid digestion of the plant samples was employed for quantification of Cu and Ni by flame atomic absorption spectrometry. All microdialysis sampling experiments were carried out at room temperature under quiescent conditions using a concentric type of microdialysis probe and electrothermal atomic absorption spectrometry was employed for metal quantification. The versatility of microdialysis as an in situ sampling and sample clean-up technique was demonstrated by the ability to sample Cu and Ni from the complex matrices of plant suspensions. Linear relations between the concentrations of Cu and Ni determined after microdialysis sampling and acid digestion were established and the constant concentration ratios of the metals were found to be 0.0138 and 0.0440 respectively for Cu and Ni thus demonstrating the potential that microdialysis sampling has in prediction of metal concentrations in plant suspension after direct relation with the acid digestion method.

Characterization of amino acids in silk sericin protein from Gonometa rufobrunnae by MEKC with phenyl isothiocyanate derivatization.

An MEKC method was developed for the separation and characterization of phenyl-isothiocyanate (PITC)-labeled amino acids derived from Gonometa rufobrunnae silkworm after microdialysis sample cleanup. The influence of the buffer and SDS concentration on the resolution of the amino acids was investigated. A buffer system consisting of 25 mM phosphate, 10 mM borate buffer at pH 9.00, and 70 mM SDS showed the best results, with 13 PITC-amino acid derivatives being resolved out of 15 possible amino acids that were under study. Microdialysis sampling demonstrated its efficiency as a sample cleanup technique. Sericin protein from G. rufobrunnae was found to be characterized by at least 11 positively identified amino acids. These included His, Tyr, Ser, Ala, Phe, Lys, Gly, Arg, Cys, Glu, and Asp. Leu/Met and Val/Thr were coeluting pairs and hence could not be positively confirmed.

Optimisation of microdialysis sampling recovery by varying inner cannula geometry.

In vitro microdialysis recoveries of glucose were evaluated and optimised by varying the inner cannula dimensions for a concentric type microdialysis probe. The recovery was shown to be significantly dependent on the outer radius of the inner cannula (r alpha). Increasing r alpha by 50% while holding all other microdialysis variables constant caused a 26% increase in recovery under the conditions tested. Mass transport modeling of microdialysis sampling showed that the magnitude of the recovery change in response to changes in r alpha may depend on other experimental variables such as effective dialysis length, membrane dimensions, membrane type and medium composition. These data indicate that microdialysis recovery may be substantially improved by optimising the outer diameter of the inner cannula. These data also suggest that in order to fully characterise and compare data from microdialysis experiments, r alpha should become one of the reported variables.

Monitoring on-line desalted lignocellulosic hydrolysates by microdialysis sampling micro-high performance anion exchange chromatography with integrated pulsed electrochemical detection/mass spectrometry.

An on-line system based on microdialysis sampling (MD), micro-high performance anion exchange chromatography (micro-HPAEC), integrated pulsed electrochemical detection (IPED), and electrospray ionization mass spectrometry (MS) for the monitoring of on-line desalted enzymatic hydrolysates is presented. Continuous monitoring of the enzymatic degradation of dissolving pulp from Eucalyptus grandis as well as degradation of sugar cane bagasse in a 5-mL reaction vessel was achieved up to 24 h without any additional sample handling steps. Combining MD with micro-HPAEC-IPED/MS and on-line desalting of hydrolysates enabled injection (5 microL) of at least 23 samples in a study of the sequential action of hydrolytic enzymes in an unmodified environment where the enzymes and substrate were not depleted due to the perm-selectivity of the MD membrane (30 kDa cut-off). Xylanase, phenolic acid esterase and a combination of endoglucanase (EG II) with cellobiohydrolase (CBH I) resulted in the production of DP 1 after the addition of esterase, DP 2 and DP 3 after the addition of EG II and CBH I, from the dissolving pulp substrate. Similar sequential enzyme addition to sugar cane bagasse resulted in DP 1 production after the addition of esterase and DP 1, DP 2 and DP 3 production after the addition of the EG II and CBH I mixture. Combining MS on-line with micro-HPAEC-IPED proved to be a versatile and necessary tool for such a study compared to conventional methods. The mass selectivity of MS revealed complementary information, including the co-elution of saccharides as well as the presence of more than one type of DP 2 in the case of dissolving pulp and several types of DP 2 and DP 3 for sugar cane bagasse. This study demonstrates the limitation of the use of retention time alone for confirmation of the identity of saccharides especially when dealing with complex enzymatic hydrolysates. In situ sampling and sample clean-up combined with on-line desalting of the chromatographic effluent, provides a generic approach to achieve real time monitoring of enzymatic hydrolysates when they are detected by a combination of IPED and MS.