Design, Fabrication, and Characterization of an Impact Dissipative Layer for Fiber-Reinforced Polymer Composites.

This study presents the option of an effective low-impact energy dissipating material applied to GFRP (glass fiber reinforced plastic) composite laminates using auxectic technology in the case of planing hull vessels that use the same high-speed light materials that repeatedly impact the surface of the water when sailing, producing a slamming phenomenon. Research shows that the option to modify the laminate with an auxectic layer protects the laminate from damage. This work proposes the manufacturing of dissipative layers, introduced in laminates made with a polymeric matrix and fiberglass reinforcement, which are evaluated with weight drop tests under different impact energies. The data are collected and processed by a unidirectional gravitometer that gives the acceleration values of the impactor. The tests compare unmodified panels with modified panels, showing that the energy absorbed by the unmodified panel is greater at equal energy levels. The returned energy comparison curve is shown, and the benefits of its use are presented.

A Methodology for Evaluating the Progression of Damage in a Glass Fibre Reinforced Polymer Laminate Subjected to Vertical Weight Drop Impacts.

This study describes a methodology that allows evaluating the behavior of a glass fibre reinforced polymer (GFRP) laminate impacted by a vertical weight drop, analyzing the damage that occurred inside. The purpose of the designers was, by means of characterization tests of the curing processes, evaluation of the cohesion of a particular laminate, application of vertical tests by weight drops and with the use of the readings of an accelerometer in a single direction, know the trend of how intralaminar breaks in the matrix and interlaminar breaks between layers occur. It is proposed to establish the behavior of the laminate before the tests by analyzing curing times, for after the tests by observations with penetrating fluorescent inks. This allows researchers to know the response of the laminate to the loads imposed on the applied structure. For the tests, prepreg material cured outside the autoclave in an oven was used and qualitative quantification of the damage by observing sections of the tested material infiltrated with penetrating fluorescent ink exposed to ultraviolet light.

Compromisso com a qualidade / Commit to quality

Descreve a experiência do autor em projetos empresariais sobre qualidade. Apresenta a teoria juntamente com exemplos, detalhes práticos e descrição de cada componente em ação, no processo Qualidade Tem Valor (QTV)